CURRICULUM VITAE

GLENN JOSEPH L. ABELLA

Address: Cortez Street East Calaguiman Samal, Bataan C2113 Philippines

Date: November 21, 1980

Place of Birth: Balanga City Bataan Philippines

Citizenship: Filipino

Civil Status: Married

Passport #: P1006779C

Mobile #: +639*********

E-mail Address: advh9m@r.postjobfree.com

advh9m@r.postjobfree.com

Position: ELECTRICAL ENGINEER

CAREER OBJECTIVE:

The applicant seeks a position where he can fully utilize has acquired knowledge and skills as well as technical capabilities through continuous training and learning in the field to be pursued. To work and grow within a professional environment and make notable contributions to the success of the organization.

WORK COMPETENCIES:

I’m a person with determination, consideration and dedication to every work I do. I don’t settle for result that is for anything else, but always for the best. I can express my ideas to a variety of people with accuracy and fluency. I am honest, trustworthy and highly trainable. I have been exposed to different clients and can handling people. Have given outmost dedication to job and customer satisfaction.

EMPLOYMENT RECORD:

YEAR:

POSITION:

NAME COMPANY / SITE LOCATION

May 01, 2016 to February 26,2020

Project Engineer/Electrical Engineer (Project Management Team/Consultant)

Jazan Port & City Infrast Projects Department Terminal Projects Division (EPC-14) t Saudi Aramco(SAPMT: Al-Jehat Company For Trading & Contracting) Dammam, Saudi Arabia

September 3,2013 – April 30, 2016

Electrical Engineer (Project Management Team/Consultant)

Shaybah NGL Project Department / Increase Gas Handling Division Saudi Aramco(SAPMT: Al-Jehat Company For Trading & Contracting) Dammam, Saudi Arabia

April 09, 2009 – December 20, 2012

Electrical Commissioning Engineer

King Abdullah University of Science and Technology KAUST (Al-Hugayet Contracting Est.) Dammam – Khobar Road, Saudi Arabia

October 18, 2007 - December 10, 2008

QA/QC Electrical Engineer

Petro Rabigh PC1 and PC# Polymer Common Electrical and Instrument Works Contract No. 0008/IK (Gulf Consolidated Contractors Company Ltd.) Dammam – Khobar Road, Saudi Arabia

May, 2007 – October, 2007

QA/QC Electrical Engineer

Hawiyah Gas Plant DCS/ESD Replacement Project Saudi Aramco J.O/B.I No. 10-000**-**** (Gulf Consolidated Contractors Company Ltd.) Dammam – Khobar Road, Saudi Arabia

February, 2007 – May, 2007

QA/QC Electrical Engineer

GTC Facilities Project at Hawiyah NGL Recovery Plant Saudi Aramco Contract No. 300*******, B.I. No. 10-00039 (Gulf Consolidated Contractors Company Ltd.) Dammam – Khobar Road, Saudi Arabia

May 17, 2004 – February 9, 2007

Field Electrical Engineer

Petron Bataan Refinery (SFI) Alangan Limay, Bataan Philippines

WORK EXPERIENCE:

EMPLOYER: Al-Jehat Company for Trading and Contracting

P.O. Box 2173 Dammam 31451 Kingdom of Saudi Arabia

SITE LOCATION: Jazan Port & City Infrast Projects Department Terminal Projects Division (EPC-14)

Kingdom of Saudi Arabia

Saudi Aramco J.O. /B.I # 25-000**-****

POSITION: Electrical Engineer (Project Management Team Consultant)

PERIOD COVERED: May 01, 2016 to February 26, 2020

PROJECT DESCRIPTION:

Saudi Aramco intends to construct a 400 MBPD grassroots refinery and hydrocarbon terminal facilities within Jazan Economic City (JEC), Saudi Arabia located in south-west on Road Sea cost. The strategic location of the refinery within JEC will leverage the existing distribution assets for products transfers to the demand centers in the area.

Jazan Refinery will be a semi-conversion refinery that processes 400 MBSD of crude oil either 100% Arabian Medium crude or a 50 / 50 be supplied from Saudi Aramco’s Arabian Medium and Arabian Heavy crude supply system in the Eastern province.

In addition, the refinery will upgrade MDP of Jeddah Refinery intermediate feedstocks (Naphtha, Distillate and Vacuum Gas Oil) to high quality finished product.

JOB DESCRIPTION:

Reviewing all the Electrical Technical Query Submitted with contractor if any clarification required on Proponent or PDD for approval, which I coordinating to them to avoid any issue will be occur during the Performance Acceptance of the Project.

Reviewing all the Vendor Print starting NMR 601, NMR 602 and NMR 603 to provide any necessary comments in order to ensue all the material Purchase Requisition will comply on standard requirement and project specification.

Attending the interface meeting issue between other EPC to resolve issue and to provide the clear solution against to the design scope of contractor to avoid impacting on the project schedule.

Sharing of knowledge to other colleague for responding the documents.

Attending the RFI raise with CONTRACTOR such as Material Receiving and Preservation of Electrical Equipment to ensure all of those equipment have been follow the Vendor preservation procedure. Moreover to highlighted all the Violation Pro-active of CONTRACTOR which need to have focus assessment to address correctly to avoid any delay on the project schedule if the material will be damage.

Monitoring the ongoing Activities on site and to ensure the daily activities plan submitted with the CONTRACTOR was follow accordingly. If any disputed we need to discuss on Weekly Construction Meeting in order to evaluate and clear the issue to avoid delay and impact on the Project Schedule.

Reviewing the proposal of Typical Installation details design submitted by CONTRACTOR. In order to ensure the works was complying on the Standard Requirements of the Project.

To ensure the safety and Quality of work on site and to raise any unsafe act or near miss in order to prevent any accident of the workers which will affect the Lost Man Hour (LTI) of the Project.

Responsible on verification of Daily roster Manpower List submitted with CONTRACTOR to ensure the accuracy of claim.

Responsible for preparing of project status to management.

To monitor the upcoming Electrical activities and to ensure the execution on site as per standard and project specification.

Responsible for the site supervision management for all Electrical works including installation pre-commissioning test of HV, MV &LV Transformer, Switchgear, Panel Board breakers and MCC.

Review the Project Quality Index (PQI)

Verification and reviewing of Monthly Invoice Progress Certificates submitted by Contractor.

Monitor Storage Handling and Preservation of Electrical Equipment and material if it is complying on Vendor Preservation procedure to maintain the Equipment integrity and Quality.

Responsible for SAT of PSA verification of I/O list and mapping between PSA panel to Switchgear panel, UPS panel and LV MCC.

Responsible for pre-commissioning of LV and MV motor such as. Winding insulation test, contact resistance and Motor Solo run test.

Preparing the SAT 2 weeks look ahead with the contractor in order to arrange the required witness representative with Aramco to have proper coordination in weekly basis.

Preparation of energization package on T95 substation for Permanent energization.

Supporting the closing of SAT punch item and PMCC comments.

EMPLOYER: Al-Jehat Company for Trading and Contracting

P.O. Box 2173 Dammam 31451 Kingdom of Saudi Arabia

SITE LOCATION: Shaybah NGL Project Department/Increase Gas Handling Division

Kingdom of Saudi Arabia

Saudi Aramco J.O. /B.I # 10-009**-****

POSITION: Electrical Engineer (Project Management Team Consultant)

PERIOD COVERED: September 03, 2013 to April 30, 2016

PROJECT DESCRIPTION:

Construction of Gas and Oil separation from oil production facilities and system, which includes such as Substation, Process Interface Building, Gas Trains Operator Shelter, Pipe Rack and System such as HV Transformer, MV & LV Switchgear,Dry Type Transformer, MV & LV MCC, PMS/PSA, ATS Battery Charger and UPS.

JOB DESCRIPTION:

To provide with full responsibility and accountability a professional service to the corporation covering the safe organization procedure control and execution for all aspects of the construction, pre-commissioning, support for commissioning process to achieve efficiency performance and full compliance testing of all the installed and combined facilities and equipment during the final stages of contracts and contract packages for major projects covering Operation Electrical Facilities Handover and project close-out.

Engineering Support – responsible for review and approval of any design issue and revision of construction drawings design calculation and FRR (Field Revision Request).

Monitoring of construction work and Progress.

Responsible for the site supervision management for all Electrical works including installation pre-commissioning test of HV, MV &LV Transformer, Switchgear, Panel Board breakers and MCC.

Review the Project Quality Index (PQI)

Responsible for preparing of project status to management.

Attending weekly Management meeting with Contractor to discuss the engineering issue.

Attending the material receiving inspection.

Champion for closing of Electrical MCC and PAC punch item.

Assist on electrical commissioning activities with the proponent.

Preparing the Energization Package in order to submit to POD and Proponent prior for Energization of Electrical Equipment.

Deliverable and reviewing the submission of Drawing Competition Certificate (DCC).

Close-out project-- review and prepare project close out document report and files submitted to SAPMT for archiving.

Handover of electrical spare part to the POD and Proponent.

Handover all electrical energization package to the Armco Library.

EMPLOYER: Al-Hugayet Contracting Est.

P.O. Box 2756 Dammam 31461 Kingdom of Saudi Arabia

SITE LOCATION: King Abdullah University of Science and Technology (KAUS)

Kingdom of Saudi Arabia

Saudi Aramco J.O. /B.I # 25-000**-*****/005 Codes #8457

POSITION: Electrical Commissioning Engineer

PERIOD COVERED: April 09, 2009 to December 20, 2012

HIGHLIGHTS OF ACHIVEMENTS:

Project undertaken KAUST King Abdullah University of Science and Technology. The project calls for construction and commissioning of King Abdullah University of Science & Technology (KAUST) on Thuwal approximately 80 Kilometers north of Jeddah. It is a US$ 3.5 billion Aramco project. KAUST is divided to main packages: Residential building, Civic & Support buildings, University Campus building and Marina. The university cover more than 36 million square meter and will be capable of serving up to 20,000 people.

JOB DESCRIPTION:

Accountable for ensuring that Pre commissioning and Commissioning is properly organized scheduled and conducted in a structured and safe manner to test and certify that all the installed and combined facilities and equipment comply with the agreed performance parameters indicated in design documents which is primarily by the project specification.

Carries to ensure that any specified performance reservations deviations are raised and cleared as soon as possible and any concessions to performance are agreed and documented.

Accountable for developing the Commissioning philosophies and development of systems with the contractors.

Support in the Project development and Execution Plans including defining commissioning criteria and construction and maintenance strategies for critical items.

Evaluates and negotiates on contractors additional cost and time claims arising throughout the duration of the contract and extending the completion related to his area of responsibility raise follow up and manage handover certificates for operations acceptance.

To provide with full responsibility and accountability a professional service to the corporation covering the safe organization procedure control and execution for all aspects of the pre-commissioning, commissioning process to achieve efficiency performance and full compliance testing of all the installed and combined facilities and equipment during the final stages of contracts and contract packages for major projects covering Operation Electrical Facilities Handover.

Review and approves pre-commissioning, commissioning and start up procedures sequences. Ensures availability of commissioning and start up.

Undertake visits in support of ongoing Commissioning activities.

Producing Exception Item List (EIL) along with Saudi Aramco Management Team (PMT) and Project Inspection Division (PID) staff in order to check conformance of all installation as per Project SPECS, NEMA, NEC, IEC and Saudi Aramco Standards.

Monitoring and checking sub contractor’s rectifying remaining exception item list (EIL) to conform as per SPECS, SAES and NEC standard.

Witnessing Pre Commissioning, Commissioning, testing up to Energization, handover of Switchgear 13.8 KV, Switchboard, ATS, Package Substation 300, 500, 750, 1000, 1500 KVA and LV Panels.

Work as a proponent as Electrical Commissioning Engineer by handling different building and Residential.

Testing and commissioning all Electrical equipment such as Insulation resistance test, Continuity test. Hi-pot test, Primary and Secondary Injection test and functional testing.

Preparation of weekly Electrical Highlights for higher management meeting.

Preparing of daily status report with regards for the completed activities.

Attending Saudi Aramco meeting to tackled regarding dispute and discrepancy of the design matter.

Supervise and verify quality of the works executed by the contractor at site.

Preparing CQN and PQN for the project deficiencies.

Gives clear, concise and understandable instruction to staff to avoid confusion, re-work and errors.

EMPLOYER: Gulf Consolidated Contractor Company Ltd.

P.O. Box 806 Dammam 31421 Kingdom of Saudi Arabia

SITE LOCATION: Petro Rabigh Development Project –Plant PC1&3 and

Polymer Common Electrical and Instrument Works

Contract No. 0008/IK

Kingdom of Saudi Arab

POSITION: QA/QC Electrical Engineer

PERIOD COVERED: October 18, 2007 - December 10, 2008

JOB DESCRIPTION:

Implementation of Project Quality Plan.

Conduct Inspection on the installation of Electrical Equipment and Power control such as Power control system, Battery charger/UPS system, Photocell for outdoor lightings, Breaker, Switchgear, MCC and UPS system.

Witness Insulation resistance test and high potential testing.

Responsible preparation of quality records on inspection/acceptance conducted.

Inspection installation of cathodic protection for Plant Facilities.

Conduct focus assessment on construction activities to ensure complying on the standard requirements.

Coordinate with Inspection department with client representative regarding the quality matters.

Witness of pre-commissioning of LV and MV motors.

Responsible and ensuring RFI's that raised by Sub-contractors are ready for inspection and it shall be as per standard, specification and IFC drawings. Raising Non Conformance Reports to Sub-contractor if defects was found during surveillance.

Surveillance for ongoing works and focus on preventing and detecting defects for construction works. Ensure that the installation activities especially in process areas, shall be accessible for maintenance to avoid reworks and punch listing during MCC walk through.

Ensuring all incoming materials receiving are acceptable, shall comply to purchased order, standards, specification and meets the requirement for the area classification of hazardous location where the equipment’s and materials to be installed.

Responsible for Test Equipment and Material receiving Inspection as per Material Purchase Order, Issued for Construction Drawings, Specifications and Standards.

Conduct Inspection and monitor all segments of Electrical works with conformance of NEC, Saudi ARAMCO Installation Standard Drawing, PIP (Process Industry Practices), API 551 (American Petroleum Institute for Process Measurement Instrumentation), SAES (Saudi ARAMCO Engineering Standard), NEMA (National Electrical Manufacturers Association) and IFC Drawing (Issued For Construction Drawings).

Preparation of Request for Inspection and Saudi Aramco Inspection Checklist Forms base on Saudi Aramco Test Inspection Procedures.

Prepare As built Drawings for final submittal.

Ensure that all punch list items are completely rectified and conduct a work completion request to operation for final inspection.

Perform quality audits on systems, products, suppliers, and projects and to initiate corrective, preventive and continual improvement actions where required.

Ensure the integrity of the quality management system is maintained when changes to the quality management system are planned and implemented.

Development of project quality plans, inspection and test plans and QC procedures.

Ensure the integrity of the quality management system is maintained when changes to the quality management system are planned and implemented.

EMPLOYER: Gulf Consolidated Contractor Company Ltd.

P.O. Box 806 Dammam 31421 Kingdom of Saudi Arabia

SITE LOCATION: Hawiyah Gas Plant DCS/ESD Replacement Project

Saudi Aramco J.O/B.I No. 10-000**-****

POSITION: QA/QC Electrical Engineer

PERIOD COVERED: May, 2007 – October, 2007

JOB DESCRIPTION:

Responsible and ensuring RFI's that raised by Sub-contractors are ready for inspection and it shall be as per SATORP standard, specification and IFC drawings. Raising Non Conformance Reports to construction if defects was found during surveillance.

Surveillance for ongoing works and focus on preventing and detecting defects for construction works. Ensure that the installation activities especially in process areas, shall be accessible for maintenance to avoid reworks and punch listing during MCC walk through.

Ensuring all incoming materials receiving are acceptable, shall comply to purchased order, standards, specification and meets the requirement for the area classification of hazardous location where the equipment’s and materials to be installed.

Responsible for Test Equipment and Material receiving Inspection as per Material Purchase Order, Issued for Construction Drawings, Specifications and Standards.

Conduct Inspection and monitor all segments of Electrical works with conformance of NEC, Saudi ARAMCO Installation Standard Drawing, PIP (Process Industry Practices), API 551 (American Petroleum Institute for Process Measurement Instrumentation), SAES (Saudi ARAMCO Engineering Standard), NEMA (National Electrical Manufacturers Association) and IFC Drawing (Issued For Construction Drawings).

Preparation of Request for Inspection and Saudi Aramco Inspection Checklist Forms base on Saudi Aramco Test Inspection Procedures.

Coordinates with client’s representative regarding quality matters.

Conducted electrical inspection from underground works to aboveground works.

Ensure that all punch list items are completely rectified and conduct a work completion request to operation for final inspection.

Prepare As built Drawings for final submittal.

Responsible for the development and implementation of a schedule of planned internal audits across all processes, and to ensure the results of the analysis (including any recommendations for improvement) to top management during the company’s management review meetings.

Perform quality audits on systems, products, suppliers, and projects and to initiate corrective, preventive and continual improvement actions where required.

Identify non-conformities, and ensure any corrections and any corrective actions are implemented and verification takes place.

Identify quality control problems, and in any serious instances initiate stop work or suspend a project if its continuation will have any adverse effect on the quality objectives of the company.

Ensure the integrity of the quality management system is maintained when changes to the quality management system are planned and implemented.

Development of project quality plans, inspection and test plans and QC procedures.

EMPLOYER: Gulf Consolidated Contractor Company Ltd.

P.O. Box 806 Dammam 31421 Kingdom of Saudi Arabia

SITE LOCATION: GTC Facilities Project at Hawiyah NGL Recovery Plant

Saudi Aramco Contract No. 300*******, B.I. No. 10-00039

POSITION: QA/QC Electrical Engineer

PERIOD COVERED: February, 2007 – May, 2007

JOB DESCRIPTION:

Implementation of Project Quality Plan.

Visually check and Quantity material delivery for electrical works based on Purchase Order requirements.

Coordinate with client’s representative regarding quality matter.

Generate inspection reports, surveillance reports and test reports.

Carry out receiving inspection of all electrical equipment’s prior to installation/use facilities.

Witness insulation resistance test and high potential testing.

Pre-commissioning solo run test on load test of motor,

Ensure the integrity of the quality management system is maintained when changes to the quality management system are planned and implemented.

Development of project quality plans, inspection and test plans and QC procedures.

Identify quality control problems, and in any serious instances initiate stop work or suspend a project if its continuation will have any adverse effect on the quality objectives of the company.

Responsible for the development and implementation of a schedule of planned internal audits across all processes, and to ensure the results of the analysis (including any recommendations for improvement) to top management during the company’s management review meetings.

EMPLOYER: Petron Bataan Refinery

Alangan Limay, Bataan Philippines

SITE LOCATION: Utilities Maintenance and Construction Department

Petron Corporation Refining Division

POSITION: Field Electrical Engineer

PERIOD COVERED: May 17, 2004 – February 9, 2007

JOB DESCRIPTION:

Review all the scope of works, IFC drawings, Standard Installation Drawings and Specifications prior for material take off and preparation of tools and equipment.

Supervision of conduits and supports installation for lighting, motor, Pushbutton, Junction boxes and panels.

Preparation of accomplishment report, daily time sheets and two weeks look ahead schedule.

Supervision of Continuity, Megger Testing of Power and Control cable prior for termination and grounding installation.

Supervision preventive maintenance of substation in refinery plant.

Verify all technical specification adhere to design requirements.

Direct and Supervise the installation, maintenance, repair, trouble-shooting and modification activities carried out on a wide range of electrical equipment, control panels, power distribution system and associated switchgear in the plant.

Provide technical advice and guidance on all related maintenance works.

Maintenance of steam generator and turbine generator.

Develops monitoring program on major items of Electrical Equipment. Include site guidance on making equipment observation and in analyzing frequent failures.

Maintains Good Quality and Safety of the work place in running Plant.

REFERENCES:

Taffah, Abdullah S. advh9m@r.postjobfree.com

PROJECT MANAGER, JAZAN PORT & CITY INFRAST PROJECTS DEPT / SA TERMINAL PROJECTS DIVISION

Zakri, Ahmad M. advh9m@r.postjobfree.com

SR PROJECT ENGINEER, JAZAN PORT & CITY INFRAST PROJECTS DEPT / SA TERMINAL PROJECTS DIVISION

Abbas, Nasir S. advh9m@r.postjobfree.com

PROJECT MANAGER, OIL FACILITIES PROJECTS DEPT / NA OIL FACILITIES PROJECTS DIV

Thuwaini, Sharief A advh9m@r.postjobfree.com

SUPVR OPERS ENGINEERING, SHAYBAH PRODUCING DEPT / SHAYBAH DEVELOPMENT

Davies, Simon J advh9m@r.postjobfree.com

SR PROJECT ENGINEER, PROJECT DESIGN & TECHNICAL SVCS DIV / TECH DESIGN UNIT V

Ammar, Majed M advh9m@r.postjobfree.com

ENGINEER IV, JAZAN IGCC PROJECTS DEPT / THIRD PARTY, INTERFACE & IMOM

Dawood, Adil H advh9m@r.postjobfree.com

SR PROJECT ENGINEER, JAZAN PORT & CITY INFRAST PROJECTS DEPT / SA TERMINAL PROJECTS DIVISION

Gray, Peter J advh9m@r.postjobfree.com

ENGINEER I, JAZAN PORT & CITY INFRAST PROJECTS DEPT / SA TERMINAL PROJECTS DIVISION

I hereby certify that the above information is true and correct to the best of my knowledge and belief.

Glenn Joseph L. Abella

Badge#: 8799561

Contact this candidate