HANUMANTHARAYA.S

Mobile: +91-984******* /974-***-****~ E-Mail: advgi8@r.postjobfree.com;

PROFESSIONAL SUMMARY

●A dynamic professional with over 24+ years of rich experience in managing project design management.

●Adept at managing Design Engineering operations involving design & development, co-ordination with internal departments, process development depts, interfacing with vendors, etc.

●Deft at managing design engineering operations, developing detailed engineering drawing,

●Proven tract record of interacting with TAT, RMO & HR Departments to define and form qualified resources to built new team for defined new project; prepared project PPTs using MS PowerPoint.

DESIGN AND DETAIL ENGINEERING services.. for

Instrumentation& Control Engineering

1) Expertise in carry out Conceptual, Basic, FEED Verification & Detailed engineering works relevant to Instrumentation & Control Discipline which will include as installation and testing of control systems, Junction boxes, cable raceways, DCS systems, Instruments, control valves, but not limited to the following:

2) Study & Review of PFD, P & ID.

3) Preparation of instrument Design Basis, Instrument Index, IO list and Instrumentation & Control philosophies etc.

4) Preparation of Instrument Specifications, Data sheets and Process data sheets for all fields Instruments & its related items.

5) Preparation of Instrumentation sizing & selection of Control valves, Switches.

6) Preparation of Instrumentation cable schedule and Cause & effect matrix.

7) Preparation of Control Room layout drawings, Instrument & Junction box layout drawings, Instrument Installation & hook up drawing, Instrument Earthing & Grounding Layout drawings, Instrument cable tray routing drawings, Instrument loop diagrams, Instrument Power distribution diagrams, Instrument Binary Logic diagram and Junction box wiring diagrams. etc.

8) Preparation of MTO for Instrumentation & control system.

9) Development of control system architecture.

10) Preparation of TBEs and Recommendation (review with vendor drawings) to support procurement activities.

11)Providing inputs to various studies, analysis & reports such Feasibility, HAZID, HAZOP, SIL, Fire & explosion, Hazard etc.

12) Implementation of instrumentation scope in the plant 3D model.

13) Knowledge of Plant control systems such F & G, DCS, SCADA, ESD, HMI etc.

14) Knowledge of Telecom such as PAGA System, Elementary & Radio communication systems.

15 Knowledge of Plant materials specifications such PMS and VMS etc.

16) Preparation of O & M Manual for Instrumentation & control engineering discipline.

CAREER PATH:

●Since January 2019. M/s Maxpro Engineer s private Ltd, Banglore. As Chief Engineer for Instrumentation..

●Janu 2013 to 2018.. M/s Toshiba Mitsubishi-Electric Industrial Systems Corporation, As Engineering Consultant for Instrumentation and Electrical Engineering services.

●Jan’03 to 2012. Quest Global Engineering Pvt. Ltd., Bangalore As a Sr. Lead Engineer / Project Manager

Key Highlights:

●Executed Instrumentation & Control & Electrical Engineering Design services in the fields of CAD.

●Accountable for designing and developing Hydro Power Plants, EBOP, Plant Design Engineering, Oil & Gas, Automotive and Aerospace domains.

●Shouldered responsibility of preparing Instrument Index, Input / Output List, Cable List, etc.

●Pivotal in sizing calculation of Cable Tray / Ladder, Cable Glands and Junction Boxes.

●Calculated Electrical Load List (AC / DC), Earthing, Lighting and Bus Bars for different voltage level; prepared single line and three line diagrams.

●Responsible for generating process flow diagrams, piping and instrumentation diagrams;

●Assisted in designing & drafting GA & IGA for various kinds of power control panels / cabinets.

●Contributed in preparing Control Loop & Schematic Wiring Diagrams for instruments / equipments.

●Prepared Project Delivery Quality Check List with respect to SOW.

●Undertook cable assembly routing drawing for Hydro Generator Protection Control System.

●Significantly contributed in ordering and procuring filed instruments like Transmitter, Pressure Gauges, Pressure Switches, Oil Level Indicators, Control Valves, safety Valves, Flow Meters & Transducers, etc.

●Efficiently implemented IEC, EUR, ANSI & KKS standards as specified by the client.

Major Project Handled:

Client: Siemens Oil & Gas-US Houston.

Achievements:

-Played a major role in forming 6 members team and imparting training in Oil & Gas domain for Siemens Peruses Project.

-Actively involved in estimation and execution of technical review for Siemens Peruses Project.

Client: Hitachi PID, Japan.

Software Used: AVEVA PDMS.

Achievements:

-Instrumental in updating review comments and implementing project plan.

-Successfully conducted technical reviews on deliverables before submitting.

-Generated Valve and Equipments List.

Client: AIRBUS, France.

Project: Design, Development & Detail engineering service for AIR BUS Electrical Harness for A350 Project.

Deliverables:

-Essayed a stellar role in building customer relationship by clear understanding of RFQ and RFI of AIRBUS for IPDC A350 Project. Placed 1 month at France for IPDC KOM and PDR deliverables.

-Administered preparation of Scheme Diagrams, Wire List for Instrument Connection Diagrams.

-Calculated Electrical Load (AC / DC) List for Bus Bars for different cabinets.

-Pivotal in supporting concept design for cabinets; undertook activities related to design reviews and finalizing component for manufacturing.

Client: GE John F. Welch Technology Centre, Bangalore. Duration: Feb’08 – Mar’09.

Deliverables:

-Deputed to GE as an Onsite Technical Coordinator for 1 year.

-Played a key role in conducting technical review / checking of P&ID and recommended updates and Bill of Materials; led 6 members team during this tenure.

Client: GE Hydro Power Plant Projects, Canada & USA. Duration: Jan’03 – Jan ’08.

Deliverables:

-Generated Generator equipment interconnection block diagram.

-Generated instrument index, Inst. I/O list, Design Basis/instrument control philosophy.

-Developed instrument specifications, data sheets, and process data sheets for field instruments and its control systems.

-Generated single line schematic diagrams for Fire Protection System, Collector Fans Control Panel, Brake Dust Collector Control Panel, Anti-Condensation Heaters Control Panel, High Pressure Oil Injection System Control Panel, Collector Housing Temperature Switch, Bearing Oil Level Switches, Flow Meters & RTDs/TC’s, Surface Air Cooler Temperature and Flow Instruments, Stator Core and Winding Temperature Instruments, Rotor Jacking Scheme, Creep Detection, Stator Air Gap Monitoring Scheme, Rotor Vibration and Acceleration Monitoring Scheme, Braking Scheme, etc.

-Generated Cable List by Quest developed Software.

-Generated instrument installation & JB location layout and instrument Loop wiring Drawings.

-Prepared cable assembly drawing for Collector Housing, Lower Bracket Area, Upper Bracket Area, Stator and Generator Pit Area.

-Looked after MTO for Instruments, Panels, Cables, Conduits and Accessories.

-Coordinated with Winding, Bearing, Piping and Mechanical Departments.

Projects Handled:

Design & detail engineering service for Hydro Generator Protection Control System projects:

-Masjed-E-Soleyman, Iran (4 x 250 MW).

-Blafalli, Norway (1 x 230 MW).

-Cheongsong, Korea (2 x 300 MW).

-Namtheun2, Laos (4 x 281 MW Main Units & 2 X 50.2 MW Auxiliary Units).

-Mossy Rock, USA and Sir Adam Bech.

Aug’98 – Jun’03 Yokogawa Blue Star Ltd., Bangalore

Design Technical Assistant-Product Engineering Department

Key Highlights:

●Instrumental in preparing of instrument design basis, Instrument index & IO list.

●Prepared Field instrument Specification, data sheets and process data sheets.

●Prepared Field instrument calibration reports.

●Prepared system configuration drawing & JB Termination details.

●Responsible for preparing Instrument Loop Schematic Wiring Diagrams and Hookup Drawings.

●Assisted in designing & drafting of GA & IGA for all kinds power control system panels.

●Pivotal in sizing and selection of control valves.

●Sizing of Cable Tray/Ladder, Cable Glands and Junction Boxes & earthing Bus Bar, etc.

●Significantly contributed in ordering and procuring filed instruments like Transmitter, Pressure Gauges, Pressure Switches, Level Indicators, Control Valves, on off Valves. Safety Valves, Flow Meters & Transducers, etc.

Major Project Handled:

●Design, development of:

-Automation & Control for NTPC, GAIL, Godavari Sugar Limited.

-Computerized Calibration System for BPCL–TMI.

-Calibration System BCCL & TISCO Test Bench.

●Complete Engineering Documentation Support of PH& O2 Analyzers Project for BHEL-EDN.

●Procurement of Hardware, Installation & Erection System for KMCL-RROY.

Aug’97 – Aug’98 Bharat Electronics Ltd., Bangalore

Apprenticeship Trainee-BTV & HF Research & Development

Key Highlights:

●Shouldered responsibility of preparing Job Card, Cost Estimation & various kinds Documents.

●Instrumental in drafting TV Transmitter-Computerized Calibration System and Power Control Cabinet Systems.

●Pivotal in Drafting Assembly of Hydraulic Cylinder, Turbine & Jet Drawings. Machinery part drawings.

Aug’96 – Aug’97 Precitech Engineering, Bangalore as a CNC Operator cum Programmer-Production & Quality Assurance

Key Highlights:

●Successfully worked with an additional responsibility of Management Representative to bring company into the mainstream of ISO 9001 procedures.

●Instrumental in looking out for periodical maintenance.

●Studied part drawing, made necessary part drawings by using AutoCAD and Programmes as per given drawing.

●Pivotal in entering Programme directly to the machine.

●Shouldered responsibility of selecting specific tools with particular dimensions as indicated in the programme.

●Responsible for proving out the first component with an utmost care.

ACADEMICS:

1.B Tech in Mechanical Engineering.

2.Diploma in Chemical Process instrumentation and control Engineering.

3.Diploma in Mechanical Engineering.

PROFESSIONAL TRAININGS.

●Project Management Training from QUEST Global..

●AutoCAD Electrical Intelligence Built from Auto Desk Centre.

●Nuclear Power Plant and its Standard Roles and Regulations from NTPC.

●PDMS Software for Piping and Scheme Design & Development from AVEVA.

●Data Analysis and Problem Solving Training from QUEST.

●Integrated Project Management System Training from QUEST.

●PCMM & CMMi Quality Module Awareness Training from QUEST.

●GD&T Training from External Consultants.

COMPUTER SKILLS;

-AutoCAD R12-2015.

-Micro Station (Ver 8.05).

-AutoCAD Electrical Intelligence.

-AVEVA PDMS SP 4.

-PIDXP Software.

-Intools.

-Widows (XP, 2000 & 2007)

MS Office & MS Project.

ACCOLADES

●Successfully worked as an Approved Technical Reviewer for various projects across the organization to deliver the first pass quality of work and to getting the highest C-Sat Score since 2009.

●Efficiently worked as SPC for Lead & TEG Group to strengthen employee’s capability and achieved employer long term goals and Targets.

●Functioned as Approved CAD Trainer to shape the designer / drafter to match quality of deliverables from 2006.

●Felicitated with Meritorious Performer Award at Quest GEDC Centre in 2006.

●Achieved & maintained very good scalable customer satisfactory score for all the projects.

PERSONAL DATA.

Date of Birth : 6th August 1973.

Address : #27, Gokula, Near Ganesha Temple, H.M.T Layout, Nagasandra (P), Vinayaka

Nagar, Tumkur Road, Bangalore-560073.

Linguistics Abilities : English, Hindi & Kannada.

Contact this candidate