HAROON QADEER KHAN

Associate Project Manager

advgf3@r.postjobfree.com

Mob# 009***********

SUMMARY

An experienced and dynamic Associate Project Manager/Sr. Project Engineer (Mechanical Engineering) with Piping/Pipeline Design engineering background and over 20+ year of experience on various engineering field in Oil and Gas Industry with progressive experience gained working for multinational engineering consulting firms as well as EPC companies.

Worked as Associate Project Manager in KBR-AMCDE, Al - Khobar (K.S.A.) with their On-Shore projects mainly at Saudi Aramco.

Worked as Sr. Project Engineer / Assistance Construction Manager in JGC Gulf International Co. Ltd., Al - Khobar (K.S.A.)

(EPC) with their various projects mainly at BAPCO. Worked as Assistant Project Engineering Manager in WORLEYPARSONS Al - Khobar (K.S.A.) with their various projects On Shore mainly at Saudi Aramco.

Worked as Sr. Project Engineer in MUSTANG-HDP Al - Khobar (K.S.A.) with their various projects On Shore mainly at Saudi Aramco.

Worked as Project Engineer in JACOBS-ZATE Al - Khobar (K.S.A.) with their various projects On Shore & Off-Shore mainly at Saudi Aramco and Sabic.

Worked as Piping Design Engineer (Piping) in SOFCON Al - Khobar (K.S.A.) with their various projects On Shore & Off Shore mainly at Saudi Aramco and Sabic.

Worked as Mechanical Engineer (Piping) in DAR Consulting Engineering (K.S.A.) with their various projects at Sabic,

(National Industrial Gases Co.) and Royal Commission, Yanbu. Worked as Design Engineer in Super Plastronics Pvt. Ltd. at Noida, (INDIA). Manufacturer of Plastic components (T.V. Cabinets) and Die Design.

Worked as Production Engineer in Encom Engineers Pvt. Ltd. at Delhi, (INDIA). Manufacturer of Beg Filter & Air Washer Systems.

Worked as Trainee Engineer in Carrier Aircon Ltd. at Haryana, (INDIA). In various Plants. Worked as Site Engineer in Desitech Air Conditioning Engineers & Contractors at Delhi, (INDIA). Worked as Quality / Production Engineer in Standual Pvt. Ltd. at Delhi, (INDIA). Manufacturer of Industrial Blades. Fully conversant with relevant national / international codes and standards for piping viz. ANSI codes, ASTM. Working experience & knowledge of SAUDI ARAMCO standards, procedures & Material Systems (SAMS). CORE EXPERTISE

Project Management Interface Management Cost – Monitoring & Control

Sub- Contractor Management FEED & Detailed Design Commissioning & Handover

HVAC, Firefighting & Plumbing Fabrication, Installation and Commissioning PROFESSIONAL EXPERIENCE

Associate Project Manager, KBR-AMCDE, K.S.A.

Dec 2019 – Jun 2020

Projects-

Worked on Zuluf AH Development- Water Supply Facilities – (BI-10-12322) (Project Proposal) –Aramco.

Worked on Sour Water Stripper and Disposal System at Berri Gas Plant – (BI-10-01628) Detail Design) – Aramco

Worked on Upgrade Shedgum GOSP Facilities – (BI-10-01657)

Worked on Replace Gas Compression System, Abqaiq Plant – (BI-10-02036) (EPC by Nesma TATA) Responsibilities

As the Associate Project Manager, responsible for the entire project management activities, completion and handover within scope, time and budget. Supervised project of varying levels of complexity, identified and mitigated risks, developed requirements, manage change control and tracked schedules and cost performance. Negotiated with the subcontractor’s scope.

Sr. Project Engineering / Assistance Construction Manager, JGC Gulf International Co. Ltd., K.S.A. July 2017 – Nov 2019

Projects-

Worked on Segregate Gasoline Sewer System (EPC Project) –BAPCO. Responsibilities

Manage and coordinate multi-discipline engineering activities to ensure projects are executed in a safe, efficient, cost effective and timely manner.

To ensure the project conforming Client’s approved basis of design and all applicable regulatory and code requirements.

Weekly project status review meetings with Client and project team.

To deliver the project as per agreed schedule with client.

Follow up on open TQs. Verifying and managing changes to the project.

Coordinate and manage interface points with existing client and new parties.

Follow-up on Action Item list from the inter-disciplines with “open” status.

Develop project engineering/management list of weekly activities to be included in the weekly progress report and list of planned activities for the coming week.

Review weekly reports, project control activities implementation etc.

Submission of mid-term design packages to Client for review and incorporation of their comments.

Coordinate the project required subcontract effort as follows: A) Follow up with lead engineers for SOW (if needed). B) Follow up with Subcontract group to collect offers within established project schedule. C) Review vendors’ offers and examine their terms and conditions to avoid any clashes with project requirements.

D) Assist in requesting access permissions for subcontract where applicable. E) Follow up with subcontracts for their final reports.

Follow up procurement activities and review their weekly status report to identify any hold up or delays to assist in expediting.

Controlling scope at site, Manage changes, identifying variations in a timely manner, raise and get approval.

Ensures to close out of every punch items.

Resolving construction issues at site with subcontractor and client.

Responsible for the supervision of fabrication and installation of pipes. The work included installation of mechanical equipment’s, fabrication and installation of pipe work, installation of pump stations, pressure testing, etc…

Inspect the materials as per specifications

Planning and coordination with concerned person during fabrication and erection.

Review whole day production monitoring the front availability.

Ensure professional standards and codes of practice are applied throughout the project.

Worked closely with Company operations, maintenance and HSE staff to ensure safely and environmentally responsible operations at all time.

Responsible for Pre-commissioning, Commissioning, and Start up and training the operators.

Ensure that all changes are properly marked on the respective engineering document and routed through the Management of Change (MOC) process for approval. Mark-ups and MOC approvals shall be included in the system dossier and also used in developing the final as-built document package

Ensure that the appropriate documents are generated before executing the Pre-Commissioning Completion Certificate to release the system/sub-system for ready for commissioning.

Identify and schedule the required vendor and sub vendor support for the relevant pre-commissioning and commissioning activities and ensure that their services are available on site at the time required.

Conduct system walk-downs to ensure that all components and equipment are mechanically complete in accordance with the project designs, technical specifications, all applicable codes and standards.

Verify all safety systems for the personnel and property are properly installed and the system / sub-systems is ready for pre-commissioning activities to commence.

Assistant Project Engineering Manager, WORLEYPARSONS, K.S.A. Dec 2016 – Mar 2017

Projects-

Worked on Field Gas Compression –Haradh & Hawiyah. (BI-10-01996 & 02029) Responsibilities-

Manage and coordinate multi-discipline engineering activities to ensure projects are executed in a safe, efficient, cost effective and timely manner.

To ensure the project conforming Client’s approved basis of design and all applicable regulatory and code requirements.

To deliver the project as per agreed schedule with client.

Follow up on open TQs, Verifying and managing changes to the project.

Coordinate and manage interface points with existing client and new parties.

Update the Action Item list from the inter-disciplines meeting (after each meeting) and follow up on any line item with “open” status.

Follow up procurement activities and review their weekly status report to identify any hold up or delays to assist in expediting.

Weekly review meetings with Client and project team.

Review weekly reports, project control activities implementation etc.

Develop project engineering/management list of weekly activities to be included in the weekly progress report and list of planned activities for the coming week.

Submission of mid-term design packages to Client for review and incorporation of their comments.

Coordinate the project required subcontract effort as follows: A) Follow up with lead engineers for SOW (if needed). B) Follow up with Subcontract group to collect offers within established project schedule. C) Review vendors’ offers and examine their terms and conditions to avoid any clashes with project requirements. D) Assist in requesting access permissions for subcontract where applicable. E) Follow up with subcontracts for their final reports

Ensure professional standards and codes of practice are applied throughout the project. Sr. Project Engineer, MUSTANG-HDP, K.S.A.

Apr 2013 – Dec 2016

Projects –

Worked on Master Gas System Expansion Phase-I Loop-I

Worked on Increase RQ-1 Pipeline Capacity.

Worked on Vapor Recovery Unit (VRU) - Major Bulk Plants Detail Design.

Worked on Jubail Bulk Plant Detail Design Project. (Assistance Project Engineering Manager)

Worked on Upgrade Power System at Tanajib Plants.

Worked on Shaybah Crude Stabilization at Abqaiq Plants.

Worked on Corporate Wide Replacement of Draw Out Type HV Motor Controllers.

Worked on Install liquid recovery system on wet H/C Blow Down system. Responsibilities-

Manage and coordinate multi-discipline engineering activities to ensure projects are executed in a safe, efficient, cost effective and timely manner.

To ensure the project conforming Client’s approved basis of design and all applicable regulatory and code requirements.

To deliver the project as per agreed schedule with client.

Follow up on open TQs, verifying and managing changes to the project.

Update the Action Item list from the inter-disciplines meeting (after each meeting) and follow up on any line item with “open” status.

Weekly project review meetings with Client and project team.

Review weekly reports, project control activities implementation etc.

Develop project engineering/management list of weekly activities to be included in the weekly progress report and list of planned activities for the coming week.

Submission of mid-term design packages to Client for review and incorporation of their comments.

Coordinate and manage interface points with existing client and new parties.

Finalize the master document for the construction contractor’s scope of work.

Follow up procurement activities and review their weekly status report to identify any hold up or delays to assist in expediting.

Coordinate the project required subcontract effort as follows: A) Follow up with lead engineers for SOW (if needed). B) Follow up with Subcontract group to collect offers within established project schedule. C) Review vendors’ offers and examine their terms and conditions to avoid any clashes with project requirements. D) Assist in requesting access permissions for subcontract where applicable. E) Follow up with subcontracts for their final reports.

Prepare project proposals, staffing-hours and cost estimations.

Ensure professional standards and codes of practice are applied throughout the project. Project Engineer, JACOBS-ZATE, Al-Khobar K.S.A.

July 2006 – Mar 2013

Projects –

Worked on YERP SP-2 Pipeline Package Detailed Engg. and Design of Feed Pipeline to YERP, Export Pipelines, Sea Water Supply/Return & Utility Pipelines. (Project Engg.)

Worked on Sales Gas Delivery System for Riyadh PP-11. (Project Engg.)

Worked on Abqaiq Oil & Water Wells. (Piping Engg.)

Worked on HWYH KHUFF GAS WELL. (Piping Engg.)

Worked on RTDB-2 & DR-2 Pipelines. (Piping Engg.)

Worked on South Abqq Hanifa – WIS & Flowlines. (Piping Engg.)

Worked on Sales Gas to JESCO. (Piping Engg.)

Worked on Pipeline Loops for SHY-1 Exp.PH-II. (Piping Engg.)

Worked on Jubail-1 sales gas grid expension. (Piping Engg.)

Worked on Khurais Downstream pipelines. (Piping Engg.) Responsibilities as Project Engineer-

Manage and coordinate multi-discipline engineering activities to ensure projects are executed in a safe, efficient, cost effective and timely manner.

To ensure the project conforming Client’s approved basis of design and all applicable regulatory and code requirements.

Coordinate and manage interface points with existing client and new parties.

To deliver the project per agreed schedule with client.

Weekly project review meetings with Client and project team.

Review weekly reports, project control activities implementation etc.

Submission of mid-term design packages to Client for review and incorporation of their comments.

Verifying and managing changes to the project.

Responsibilities as Piping/Pipeline Engineer-

Nature of Work

Technical analysis of quotation and vendor document review including resolution of queries, Meeting with the clients. Working as a Piping Lead.

Basic & Conceptual Engineering

Conceptual Engineering design and Optimal System selection. Design and Technical reports generation and identification of main system components. Detailed Engineering

Piping Material Specifications and selection, Hot tapping / stopple plugging design calculation, Valve Data Sheet, SIS, Technical Bid evaluation, NMR’s, Staffing plan, All other Engineering activities. Engineering Analysis (Pipe Stress Analysis).

Mech. Engg. (Piping), SOFCON, K.S.A.

Oct 2002 – Oct 2005

Projects –

Worked on Upgrade Oily & Wastewater Systems Western Region Distribution.

Interconnection Facilities for 3rd Party Cogeneration at Uthmaniyah, Shedgum, Juaymah Gas Plant & Ras Tanura Refinery.

NIGC Pipeline Upgrade at Jubail Royal Commission.

SIPC GAN Pipeline and Metering Station.

IBN Rushd (Acetic Acid Plant) GOX Pipeline and Metering Station.

New 20” GAN Back-up Pipeline.

Ibn Rushd Sales Gas Pipelines and Metering Skids.

Burried 18” GOX Pipeline & 12” GAN Pipeline.

Nature of Work

Technical analysis of quotation and vendor document review including resolution of queries, Meeting with the clients. Working as a Piping Lead.

Basic & Conceptual Engineering

Conceptual Engineering design and Optimal System selection. Design and Technical reports generation and identification of main system components. Detailed Engineering

Piping Material Specifications and selection, Hot tapping / stopple plugging design calculation, Valve Data Sheet, SIS, Technical Bid evaluation, NMR’s, Staffing plan, All other Engineering activities. Engineering Analysis (Pipe Stress Analysis).

Mech. Engg. (Piping), Dar Consulting Engineering, K.S.A. Feb 2002 – Oct 2002

Projects –

Updating of Drawing & Document NIGC-GAS

(On deputation with NIGC - GAS)

Nature of Work

To Manage the Updating of Drawing & Document NIGC-GAS.

Preparing & Reviewing modified Drawing.

Reviewing of MOC (Managements of changes) & verifying from the site.

Updating & Development of affected Drawings such as P & ID, Piping Plan & Layouts, and Piping Isometric Equipment Installation Details, Material Take-Offs, etc.

Engineering Analysis (Piping Stress Analysis using Caesar II 4.4).

Co-ordinations and dealing with the client for technical aspects.

Line checking of piping, pipe support and orientation as per isometric.

Inter coordination with CIVIL/ELECTRICAL/INSTRUMENT DEPT. and OPERATION DEPT.

Pre- commissioning checks that conformance of piping and instrument installation as per P& ID. Design Engineer, Super Plastronics Pvt. Ltd, INDIA Apr 2001 – Jan 2002

Projects –

In house die designing and TV production Unit

Nature of Work

Worked on 3D modeling software Ideas Master Series 8.0, DELCAM (Power Mill) to design customized products for various clients.

Design & Development of Plastic Molding Dies.

Worked on Sinumerik 810D (HMT VMC 1200) & Heidenhain (DMG DMU 125T) controllers. Production Engineer, Encom Engineer Pvt. Ltd., INDIA Sep 1998 – Mar 2001

Projects –

In house production Unit

Nature of Work

Responsible for Drafting Drawings & Designing of the Equipment’s that needed Fabrication.

Responsible for Equipment Erection of Exhaust System, Ventilation System, Air Washers, Bag Filters, P. & V. Systems Etc.

Responsible for Incoming Inspection and Quality Assurance for Incoming Parts and Components.

Responsible for Testing of Finished Products by using Latest Techniques.

Responsible for Reviewing & Training the Labor.

Co-ordination with client representative and inspection agencies for all technical matters pertaining to routine tasks. Trainee Engineer, Carrier Aircon Ltd., INDIA

July 1998 – Aug 1998

Projects –

In house production Unit

Nature of Work

Received Training in Different Departments of the Plant including- Compressor Assembly, Window & Split Air- Conditioning Assembly, Coil Shop, Paint Shop, Quality Assurance, Chiller & A.H.U. and Maintenance. Site Engineer, Desitech Air Conditioning Engineers & Contractors, INDIA Jan 1998 – June 1998

Projects –

Multiple Projects

Nature of Work

Supervising the Installation of package units, Split unit & Window Air conditioners.

Preparing & Reviewing the Government and Public Tenders.

Conduct site survey of existing facilities to evaluate the development of the project.

Fabrication & installation of Ducting at plant.

Total quality control of fabrication.

Production Engineer, Standuel Private Ltd., INDIA

Sep 1991 – Sep 1993

Projects –

In house production Unit

Nature of Work

Responsible for Testing Hardness of Raw Material.

Responsible for Testing the Finished Product.

Draft Drawings for the Product needed to be machined.

Responsible for Incoming Inspection and quality Assurance for Incoming Parts and Components.

Co-ordination with client representative and inspection agencies for all technical matter pertaining to routine tasks. EDUCATION

Bachelor in Mechanical Engineering – AMU Aligarh, 1997 Diploma in Mechanical Engineering- AMU Aligarh, 1991 REGISTRATION / AFFILIATIONS

Saudi Council of engineers

SPECIFIC TECHNICAL EXPERTISE / SPECIALIST COURSES

Certification of Completion – Institute for Workforce Education, Saudi Arabia

Effective Team Work

The Power of Influence: Art of Persuasion

Leadership, Supervision & Management

Certification of Completion

Internal Quality Auditing (ISO 9001: 2008)

Piping Stress Analysis (Using CAESAR-II)

Certification of Appreciation for Projects

BI-1000615: Shybah Crude Stabilization, Abqaiq Plants

Corporate Wide Replacement of Draw-out Type HV Motor Controllers

BI-10-01286; Upgrade Gas Compression Plant Power Distribution, Tanajib Plants. PERSONAL INFORMATION

PASSPORT NO.: Z 2693696

PLACE OF ISSUE: RIYADH

DATE OF ISSUE: 15 Mar. 2017

DATE OF EXPIRY: 14 Mar. 2027

MARITAL STATUS: MARRIED

NATIONALITY: INDIAN

Contact this candidate