Mauricio Sanchez

**** ******** **. *******, ***** 77067

832-***-****

advg4b@r.postjobfree.com

EXPERIENCE

Pipe Technologies and Products Field Service Lead

Technician Engineer. LEFT COMPANY DUE TO

THE PAY WAS NOT ENOUGH TO COMPENSATE

FOR THE DRIVE TO AND FROM WORK.

May 2021 – May 2022

● Create quotes for customers like ExxonMobil, Valero, Phillip-Chevron Chemical.

● Receive PO and complete surveys at the specific refinery plant.

● Complete job scope for all material and parts needed on site and create quote.

● Once approved by customer, report to job site, supervise and repair, adjust, or replace equipment.

● Complete a job completion report, complete expense reports, and close the job quote.

● PTP manufactures Variable Spring Cans for Pipe and many other equipment support, Constant Supports, Snubbers, Pipe Clamps, Pipe Bellows, Expansion Joints, and Pipe Insulation. Pipe Technologies and Products

Maintenance Technician

May 2019 - May 2021

● Repair CNC machinery to procedure specs

● Repair and calibrate Miller and Lincoln Electric commercial welding machines.

● Repair cranes by procedure specs

● Input all necessary information and work scope to completion into company server.

● Well versed in Microsoft word, Excel, PowerPoint, and relevant software. Personal Business/Mobile mechanic Jan 2018 – Present

● Work at home on various types of vehicles from diesel engines to gasoline engines.

● Engine repair, rebuild, or replace. Complete engine overhauls.

● Electrical experience with EMC, PCM, or main computer to complete electrical wiring.

● A/C experience troubleshooting and repair.

● Basic maintenance service experience on any vehicle.

● Paint and Body experience, basic R&I on body panels to a complete paint job. Exterran Energy Solutions Dec 2017 – Nov 2018

Manufacturing Supervisor/Foreman

● I was responsible of making sure all Natural Gas Compression skids were built correctly and accurate to the customers need.

● Supervised more than 50 employees. Responsible for employee’s payroll, job scheduling and reporting and budget control and targets

● Conducted morning safety meetings and end of shift debrief meetings to improve efficiency, troubleshoot issues and maintain the assembly line flow and schedule..

● Attended daily meetings with project managers, engineers, electricians, designers, and the plant managers to help maintain production of compression equipment, maintain on-time delivery and work procedures from skid through assembly line and final testing and approval by the customer and myself

● Maintained schematics and P&ID revisions and corrections coordinated with project engineers to implement in the field to ensure proper specs and efficiency.

● Responsible for maintaining equipment inspection and sign-off by quality control, customer and myself.

● Overall supervision of equipment needed, requisitions required and meeting schedule and budget targets. Seadrill Americas Jan 2013 – July 2016

SubSea Engineer SWAT TEAM(Gulf of Mexico)

● Part of a special Subsea Engineer Group of less than 24 engineers. Group deployed to off-shore rigs to assist in the implementation of special projects that couldn’t be accomplished by the on-board personnel due to knowledge or scheduling needs. As Subsea Engineer role was to help maintain, observe, and train on-board personnel work on all subsea equipment. Responsible for assisting in preparing BOP for launching, from pressure testing to complete tear down and rebuild of any part on a BOP and locating well information for set up of hydrostatic and surface pressures. Trained and assisted in maintaining high pressure unit to working specs, diverter panel, fluid reservoir unit and all surface equipment related to the BOP.

● Worked with Direct Riser Tensioners, Wireline Riser Tensioners, and Active Heave Compensator systems to maintain proper working specs and set-up depending on water current and riser angle. Assist the ToolPusher and Driller in implementing safety and efficiency targets and requirements. Ensure that all working APVs and standby APVs are in proper specs.

● Assist and prepare riser joints for rundown. Ensure that all bolts, seals, sealing areas, buoyancy packets in proper working order. Prepared all tools for proper torque of bolts on riser joints.

● Assisted subsea personnel on board to maintain choke and kill manifold, ensure that all valves are working correctly and perform any overhaul needed. Assist drillers as required.

● Coordinated with Senior Subsea Engineers in creating safety procedures and efficiency improvements.

● Maintained daily check list and report of all equipment to ensure proper fluid/air pressures and damage control.

● Trained, assisted, and carried out high pressure testing to help personnel meet company standards.

● Worked with software programs to keep equipment maintenance dates and records of updates to the database and programs perform daily, weekly and monthly tasks.

● Updated Subsea personnel with new maintenance, safety and efficiency standards and procedures. Ventura Petroleo/ Carolina NS-29 June 2010 – December 2012 SubSea Engineer (Brazil)

● Responsible to maintain all subsea equipment. Responsible for assisting in preparing BOP for launching, from pressure testing to complete tear down and rebuild of any part on a BOP and locating well information for set up of hydrostatic and surface pressures. Maintain high pressure unit to working specs, diverter panel, fluid reservoir unit and all surface equipment related to BOP.

● MRT and CMC system. Maintain proper working specs and set-up depending on water current and riser angle. Assist the ToolPusher and Driller in implementing safety and efficiency targets and requirements. Ensure that all working APVs and standby APVs are in proper specs.

● Prepare riser joints for rundown, ensured that all bolts, seals, sealing areas, buoyancy packets are in proper working conditions. Prepared all tools for proper torque of bolts on riser joints.

● Maintain choke and kill manifold, ensure that all valves are working correctly and perform any overhaul if needed and to assist driller in any situation when needed.

● Responsible for creating procedures for tasks needed for completion of any testing.

● Maintained daily check list and report of all equipment to ensure proper fluid/air pressures and damage control.

● Performed periodic testing of all equipment.

● Worked with AMOS program to store and update work orders to perform daily, weekly or monthly tasks. Monitored requisitions to ensure needed parts and supplies were in stock or needed to be ordered.

● Use of proper steps to ensure task can be completed correctly and safely, insert a permit to work with JSA and carry out pre-work safety meetings with assistants. GE Oil & Gas/ Hydril September 2008 –January 2010 Lead BOP Tester Assembly Specialist 2 (HTC Houston, Tx)

● Lead Tester to make sure equipment on the BOP Stack functioned correctly. Managed four employees. Troubleshoot any problems or issues during the FAT testing (factory acceptance test) and implement corrections from crossed functions, leaks, the wellhead connector Ensure all equipment work properly.

● Worked with JDE Edwards software to find parts needed for rebuilds.

● Mastered interpretation of schematic drawings and assembly drawings and understanding of procedures required for the re-building, functionality, and testing of equipment.

● Assemble, breakdown, rebuild and replacement of all BOP Stacks components, regulators, SPM valves, 1 1/2 - 2" ball valves, shear seals valves, shuttle valves, check valves, and re-ran tubing.

● Experience with MMI and QNX software

● Maintain HPU to its proper working configurations. Ensure glycol/water mixture was in its proper specs. GE Oil & Gas/Hydril April 2007 - September 2008

Assembly Specialist 1 (HTC Houston, Tx)

● Versed in the art of bending tubing and pipe fitting. Mastered assembly/flow schematics/blue print reading and building per drawing specification and to perform to safety and quality demands.

● Charge accumulator bottles to specs.

● Trained on proper torque base, on protocol and procedures of torque equipment (e.g., hytorc gun, J-Gun, various size torque wrenches)

Trained on crimping Parker hoses and running cable trays

● License to operate many different types of heavy machinery; JLG lifts, scissor lifts, up to 45K forklifts, 30 ton to 250 ton cranes.

EDUCATION

Kingwood LoneStar College June 2007 - April 2011

Associates In Applied Science

● Graduated

Marque Learning Center August 2003 - February 2007 High School Diploma

● Graduated

Contact this candidate