Welder Emergency Management
Resume:
Applicant Name: CATCHIN, EDWIN G.
Position Applied: Welder Fcaw, Mig, Gmaw, Smaw, Tig, Plastic Welding Nickname: Ed Mobile #: +614********
Birth Date: Nov.02, 1969 Email Add: *******.*****@*****.***.** Gender: Male Height: 163 cm
Birth Place: Dapitan City Weight: 62 kilo
Civil Status: Married Religion: Roman Catholic
Address: 2/48 Sharps Road Tullamarine 3043, Victoria Educational Information
College
Associate in Marine Engineering (AME)
1990-1992
Technological Institute of the Philippines. 363 P. Casal Street, Quiapo Manila High School
Gen. Emilio Aguinaldo Integrated School Sta. Ana Manila 1986-1990
Elementary
Punta Silum Elementary School Misamis Oriental
1980-1986
Employment Information
Company : AG ENGINEERING SOLUTIONS
Address: :413 Dib Court Tullamarine 3043
Position : Welder Class A
Date : May 9, 2022 – Present
Duties and Responsibilities:
Basic structural steel assembles of beams and brackets, mounting plates and columns, welding in all positions, flux core and solid wire.
Welding cover rotor stainless steel.
Welding stub shaft flange
Plate wheel and preferable double Vee butt (70mm thickness) preheat and welding multiple passes.
Welding transition base (20mm thickness) and rewinder sprocket.
Fitting and welding Norstar Project cable tray (connection piece support, lower Plate and top plate)
Ensure the safety of work place by applying the safety of work procedures. Company : CRACCO PTY LTD
Address: :47 McIntosh Street, Airport West Victoria,3042 Position : Welder Class A
Date : October 22, 2015 – May 7, 2022
Duties and Responsibilities:
Cleanaway 31m2 bin, repairs and refurbishment. Patches side plate, replace reel and weld.
Manufacture 31m2 Bulk hook bin, 12 tonne SWL, Hook lifting bar in 50mm Bright steel with gussets, Universal Beam loading rails, doors ratchet locking mechanism with guide plate and pin, internal support gussets, heavy duty rollers, tarp tie down rails.
Cleanaway 23m2 bin, fit new A frame and hook bar, repair/replace top main frame fit skins to floor and side sections.
Cleanaway 15m2 bin, repair door, upright support, straighten lower skirting, repair lock mechanism support, fit signage plates, repair ladder and tie down rails.
Cleanaway 12m2, 8m2, 6m2 bin fully refurbish hook bin Fit stickers, stencils and reflective tape.
Cleanaway 4.5m2 and 3m2 general waste bin, 3.0m2 and 1.5m2 rubbish bin. Repair front lift bin, replace whole floor, patches side plate and welding.
Cleanaway plastic bin (general waste bin, rubbish bin, and cardboard bin) 1100L, 600L and 240L replace, repair and welding crack lid.
Citywide 31m2 bin weld Gussets to A-frame, scrape out floor, fit skins to wall, floor and door, fit ratchet locking mechanism, fit new rollers, repair roller support bearer and straighten tie down rails.
Citywide 23m2 bin, fully refurbish hook bin, fit stencils stickers and 3M reflective tape.
Citywide 15m2 bin, welded identification numbers, painted in zinc primer and finished in industrial and reflective tape fitted.
Citywide 4.5 m2 general waste bin, 3.0m2 rubbish bin, 1.5m2 cardboard bin. Repair front lift bin, patches floor, side plate and welding.
Remondes 23m2 bin, repairs and refurbishment. Change A frame, hook bar, fix lock mechanism and welding.
Veolia 15m2 bins replace hook bar. Patches side plate, repair top main frame, straighten tie down rails and welding.
Visy 4.5m2 general waste bin, 3.0m2 rubbish bin, 1.5m2 cardboard bin. Repair front lift bin, patches/replace floor, patches side plate and welding.
Visy plastic bin (general waste bin, rubbish bin, and cardboard bin) 1100L, 600L and 240L replace, repair and welding crack lid.
(house project) Welding base plate, post, connector plate and drilling holes.
(house project) Welding and assemble diagonal support PFC and SHS post. Company : Specialised Engineering
Address :PO Box 4455 lot 215 Williams Road Kalgoorlie WA 6430 Position : Welder Class A
Date : February 24, 2015 up to May 1, 2015
Duties and Responsibilities:
• Weld pressurized diesel tank.
• Repair and full weld vessel truck.
• Welding structures and frame work, conveyor guards and machine guards.
• Welding 18” diameter pipe with end to end flange.
• Full welding of grizzly finger for primary crushers goldmine Edna May.
• Welding big screen for Tropicana goldmine.
• Welding metered Elbow with flange 2.5 meters diameter for BHP nickel west. Company : EC & E Ltd
Address : Lot. 4744 Muramats Road Berrimah N.T Australia 0820 Position : Welder Class A
Date : May 9, 2014 up to January 16, 2015
Duties and Responsibilities:
• Performs welding in different forms position from 1G - 4G and 1F - 4F on a certain job requires using GMAW and FCAW welding process.
• Weld Platforms, Handrails, and Ladders using FCAW and GMAW. All Butt Joints are required to pass the UT test according to the JKC for ITCHYS {INPEX} Project.
• Understand Welding Symbols to know where to Weld and what type of Welding to perform on its part and its bead sizes.
• Follows the Safety and regulation in the company. Applying SAFETY FIRST policy in the Company at all times to achieve zero accident rates.
• Housekeeping before and after the work and even during working hours if necessary
• Use Overhead Crane for lifting Heavy Metals
• Use Forklift to load and unload Materials
Company : NORTHERN TRANSPORTABLE
Address : 46 Lilwall Road Darwin Business Park East Arm.NT0828 Position : Welder Class A
Date : April 27, 2012 – March 31,2014
Duties and Responsibilities:
• Assemble the roof truss main frame, square the main frame by diagonal checking.
• Assemble steel roof truss members by tacking them together from ceiling joist, outside truss, stiffeners and webbings.
• Make sure secondary bases are installed to avoid deformation.
• Cut metals stocks such as main chassis rail or I-beam, spreaders, outriggers, beam and column according to the specs.
• Assemble all the main frame members and braces by tacking them together, square the main frame by diagonal checking.
• Check all dimensions before performing full welding process.
• Clean the surface of steel that needs to be welded and make sure free of dirt, oil and rush to achieved good weld results.
• Perform full welding process such as 1F, 2F, 3F, 4F, 1G, 2G, 3G, and 4G.
• Make sure all welds are free of defect such as cracks, porosities, undercuts overlaps and spotters.
• Clean weld by using grinder, chipping hammer, steel brush.
• Set-up welding machine by fitting the attachment, connecting the hoses to gas tanks and wires to power sources and adjust, control to regulate gas pressure, voltage or amperage.
• Clean all welds and remove secondary braces.
• Insures best quality of all works done at all times at the least cost possible.
• Transport finish product to painting area using forklift.
• Fit up and tack all the parts and recheck if it is correct according to the plan, standards and specification.
Seminar/ Training / Achievements / Certification Information DATE: TITLE: Conducted:
June 3,2015 Working in Confined Spaces Riklan Emergency Management Services
114 Dugan Street, KalgoorlieWA6430
June 2, 2015 Work Safely at Heights Riklan Emergency Management Services
114 Dugan Street, KalgoorlieWA6430
May 12, 2014 Welder Qualification Register
( GMAW/FCAW- 2G double Vee Butt and 3G double
Vee Butt)
24 Muramats Road Berrimah NT 0828
Australia
September 29,
2012
Welder Qualification Record
(GMAW, 1F flat, 2F horizontal, 3F V-up)
Northern Transportable,46 Lilwall
Road, Darwin Bus. Park East Arm NT
0828
February
29,2012
Certificate III in Engineering-Fabrication Trade
MEM30305,ANZSCO322313,Welder(First Class)
Executive Training Center,
Sta. Ana, Manila
Career Related Skills
- Can do driving jobs implementing all the safety precaution.
- Can do forklift operation in safety manner.
CHARACTER REFERENCES
Carlo Campanella
Managing Director
Cracco PTY LTD
Avril January
Workshop Foreman
Specialised Engineering
Johan Norman
Site Coordinator
Specialised Engineering
Richard Alvarez
Welding Supervisor
EC AND E Pty Ltd
Richard Laurie
Production Manager
Northern Transportable
Australia
Mobile Num. +614**-***-***/(08)89474070
Tony Syme
Head Welding Supervisor
Northern Transportable
Australia
Mobile Number: +614**-***-***
Applicant’s Signature
Contact this candidate