Post Job Free
Sign in

Machine Operator Project Manager

Location:
San Jose, CA
Posted:
April 01, 2023

Contact this candidate

Resume:

Joseph l. Mecano

#**** ******* ***** *** ****, California, 95133- U.S.A.

Cell # 408-***-**** Email Address : *******@*****.*** ********@*****.***

Objective To obtain a challenging position in which my skill and experience can be effectively utilized

Summary:

· Experienced as a R&D Tech, Tech I, Operator III/IV, Assembler IV/V, Associate Technician I and Technician endoscope II

·Worked with engineers, supervisor, QA staff and project manager to develop and document manufacturing process and procedures

.

· Experienced in using GD&T for inspections and followed all applicable manufacturing documentation in the assembly and testing products

· Experienced in censoring tablet of the following task such as, array punch, dispense, inspections, ID tool machine, final inspection, sealing, labeling and rotary machine Trained, certified in the (PHP) Percutaneous heart pump of the following task such as Weller Wesd51 for Welding, Omni cure 2000 UV light for curing and bonding, Rofin Starweld machine for laser, welding Isaac Multi function for leak testing and using microscope as well

· Designed and fabricated new prototype aid in the development of manufacture processes and performed experiments for product testing

.

· Experienced working in Hard disk drive, Semi conductors, Circuit board, PC board, Soldering capasitors. Optical glass, Wafer Fab.

Experienced in assembly of battery module Tesla Model S and working closely inside of circuitry wiring power connection testing and air leakage testing. Trained and know how to read Blueprint, Engineer drawing, schematics, calculating statistics, Validating equipment’s and processes,

Trained and know how to used different kind of machined measurement tools hand tools and testing machines liked: CMM optic machine,Laser rail, Wayko 9000, Instron machine,Micro VU, Laser micrometer, Oschillosope, Digital micrometer, Calipers, Scope meter, Pin gauge, Snap gauge Multimeters.

Experiences: Keysight Technologies San Jose Ca., 07/2022-Present Fabrication Technician

• Operating of process equipment wet and dry including inspection and metrology, laser based and optical exposure systems, execute and manage parallel process flows across multiple wafer streams.

• Inspection and verification of process quality standard including documentation and maintaining accurate records / documentation related to quality work in progress test result and special projects.

• Inspect different kind of optic assembly by using different kind of machine measurement like: Laser rail, CMM optic machine, Wycko 9000, and some hand tool measurement like Calipers, scope, Micrometer and SQ after measurement then file MRT papers to deliver the parts warehouse

• Ability to measure optic dimension of fitting by using certain tools, Ability to set up and start up all fabrication machines and equipments.

• Complete all necessary documentation associated with the optical assembly, equipment maintenance program and fabrication process, Prepares material list based on scale drawing for fabrication or construction projects

• Fabricates, Modifies, Assembles, Install, Operates, Repairs and maintain complex experimental and commercial optic fabrication, Records evaluates record data summerized test data via written tabulation charts graphs and prepare informal reports.

Shockwave Medical Santa Clara Ca., 10/2021-07/2022 R&D Technician III

• Perform research and Engineering laboratory function involving the layout, building Testing, Troubleshooting, Repairing and modification of mechanical or electro- mechanical materials, Devices, Assembles, Sub-Assembles, Systems and

. products

• Responsible for compliance with applicable corporate and divisional policies and procedures

• Performed a variety of duties in the electrical, mechanical, electro mechanical, chemicals UV curing, Coating, Self modified hub bonding, Connector, Laser bonders (LBS 400) optical areas,

• Build or assembles prototype materials, Components, Sub-Assemblies and assemblies operates, Troubleshooting, Calibrates, Set up, adjust and test equipments..

• Works from schematics, Engineering drawings written or verbal instructions

• Perform test, Analyze data and write reports, review or develop processing or Manufacturing instructions.

• Maintain detailed documentation through all phases development, testing and analyzed.

Abbott Vascular, Menlo Park Ca, 08/2018-10/2021

Sr.IQA Inspector/ R&D Technician

• Assignment are done with minimal supervision, judgement and decision making maybe required. Routinely is given new or moderately difficult assignment. Position requires a high level of skill in function to basic quality assurance inspection and manufacturing activities and able to assist in other processes with in the area and often required to trained others.

• Perform incoming QA inspection for components, Perform final product inspection and testing finished product, Incoming inspection of raw materials parts and products .

• Perform line clearance, Assembly support such as cleaning materials attend everyday meeting. View LHR, Process MRR reports and issue measurement reports, performed in house printing of labels or custom label inspection.

• Check LHR, DHR quality related documents for completeness, Accuracy, Line clearance And conformance to procedures

• Generate non-conforming material report an initiate material review board (MRB)

• for non-conforming materials.

• Perform wide variety of inspection, test and sampling procedures to insure quality of received components and manufactured goods adherence to quality procedures and other duties as assigned..

Proteus Digital Health Hayward Ca., 02/2017—02/2018 Tech I.

• Coordinates and monitor project task execution and project problem interfaces directly with Engineer, Supervisors and other department. Follow all applicable manufacturing documentation in the assembly and testing of product.

• Work with Engineers, Supervisor, QA staff and Project manager to develop a document manufacturing process and procedures.

• Responsible for providing manufacture line support by clarifying and revising procedures and addressing technical problems as needed.

• Trained and certified in all station how to make Digital Medicine Sensor Tablet of the following task such as, Array Punch, Dispense, Inspection ID Tool machine, Final Inspection, Sealing, labeling, M.I.T, Rotary Machine. Thoratec / St Jude Medical Sunnyvale Ca., 03/2016 -11/2016 R&D Tech

• Trained and certified in the ( PHP ) Percutaneous Heart Pump of the following task such as Weller Wesd51 for soldering, Omni cure 2000 UV light for curing and bonding, Rofin Starweld machine for l Lazer welding driver magnets, Isaac Multi Function for leak testing and using Microscope

• Design and fabricates new prototype aid in the development of manufacture processes and perform experiments for product testing.

• Prepares complete product test,calculate statistics, Validates equipments and processes

• Create complete R&D engineering documentation following stablished procedures write and verifies specification.

• Coordinates and monitors project task execution problems interface directly with R&D, Supervisor, and Engineers.

Tri-Reme Medical Pleasanton Ca 09/2015 – 12/2015

Operator IV / R&D Tech ( Associate )

• Trained and certified in coating, crimping, boxing, and final inspection of the balloon stent catheters

• Design and perform highly compliance experiment for product testing .

• Calculates statistics and prepares complete product test, Validates equipment and processes.

• Train staff on its operation as directed Schedules necessary calibration or preventative maintenance.

• Perform responsibilities required by the quality system duties as assigned and participates project team meetings.

Stryker Medical Mountain View Ca.,

Boxing, Pouching / Operator III 04/2015 – 09/2015

• Trained in Quality Assurance basics

• Used Various small tools tweezers, hot box, ultrasonic, solder, calipers pin gauge,and microscope as well.

• Verification of raw materials and Kanban labels.

• Verification of equipment labels stickers and calibration due dates

• Print labels verify revision and inspect labels no missing letters & numbers

• Inspect finish product and insert into plastic loop and ready for pouching

• Putting insert in the pouch together with the product and seal

• Final inspection inspect all finish sealed product no missing labels, Insert, uneven labels wrinkle pouch, ready for shipping. Abbott Vascular Menlo Park Ca. 08/2014 – 04/2015

Operator III - Contractor

• Certified,trained and perform all the process in the final line of DC shaft

• Coil and cable assembly

• Bonding of bullet nose

• Bonding and inspection of bullet nose

• Catheter shaft insertion of coated shaft cutting length and hysol of the

• Catheter

• Experienced in using GD&T for inspection.

• QPI for bonding shaft inspection

• Prepare for the handle by soldering of Hypotube, threaded tube Connected to the compression coil of the catheter and cleaning the solder Joint to prevent corrosion.

• Help in the maintenance department and in material labeling MedconX Santa Clara Ca. 08/2011-12/2014

Assembler IV/ Associate Technician.

Used various small hand tools and microscopic soldering.

• Perform basic process /product test and audits for conformity to quality and / or regulatory requirement

• Self inspections of own work .

• Followed standard operating procedures for all task.

• Verification of all documentation.

• ISO standard for the unit prior to shipping.

• Maintain clean and orderly work area in clean room environment.

• Assisted as a team member with build of product at a various station to keep the line flowing

Google Sunnyvale Cal., 11/2013-04/2014

Technician I

• Working on a Google glasses as a technician with the robotic machine.

• Start by putting all parts film, cubes, optics load all together in one holder and load all in plasma machine in 5 min.

• Unload after plasma putting all together in a different holder and load into the robotic machine and the robotic machine will do all the works by putting the film, cubes and optics with glue and UV light to dry the glue, all together in one piece.

• Unload into the robotic machine and self inspection of your own work by checking the alignment between the cube and optic then ready to QC

Olympus America, San Jose, Ca., 05/2007 – 09/2008

Technician, Endoscope II

• Disassembly and parts recovery using a variety of small tool sand test

equipment to make repairs & facilitate disassembly & re-assembly.

• Completed and maintain accurate service records both electronically.

• Proactively participating in quality system, and quality improvement and “5S, program with the lead endoscope technician / production Supervisor performed other duties as assigned.

Cardiac Pathways / Boston Scientifics, S.J. Ca. 08/1998-07/2008 Assembler V

Displaying solid technical skill in micro-wire and tubing assembly.

• Insert Polymide assy. Into santroprene and cut to final length

• Has been trained and understands the :Tension testing on the Cotillion machine, braided tubing OD, grinding

• Proximal shaft sub-assembly

• Solder connectors, conductance testing and fusing leak test

• Perform transducer activation

• Meeting goals of zero defect per assignment

Lumend ( J & J ) Redwood City Ca., 01/2006-06/2006 Assembler IV

Assembled components into medical devices in accordance with approved manufacturing procedures

• Performed in process quality checks on sub-assemblies and finished products

• Utilized small hand tools, calibrated instruments, measurement equipments, microscopes and test fixtures

• Adheredto general safety rules, manufacturing procedures, and company policies and test results.

Education

Evergreen Valley College, San Jose, California 1994-1996 Major: Emergency Medical Tech (Associate College) Certificate complete Saint Mary’s Dominican High School, Philippines, 1983-1987 Awards Received

I was the only machine operator who passed the ISO-9000 in Seagate Magnetic 1992 Performance Awardee for excellent achievement in Dyna Craft Inc. 1995 I received an award as PVD First quarter employee in Seagate Magnetic 1990 28 Years experienced working as a Medical Devices..



Contact this candidate