Germain Galeas
Beltsville, MD *****
***********@*****.***
Authorized to work in the US for any employer
Work Experience
Train New Employees and Apprentice
J&O Construction
May 2015 to Present
May 2015- Present
Carpenter Electrical & HVACR Tech
• Respond to emergency situations in order to resolve issues on an immediate basis
• Install and commission heating, ventilation and air conditioning systems and thermostats and duct
• Replace faulty or expired parts in an HVAC system
• Determine need for upgrading HVAC systems and take measures to take necessary actions.
• Basic and advance mechanical, electrical, hydraulic and trouble shooting skills. Use and conduct proper care of PPE. Read and interpret schematics (blueprints) and blueprints. Read and interpret work orders.
• Run new romex wire follow blueprints for brand new house and troubleshoot and install switches, outlets, lights
• Carpentry Framing wood and metal studs. throw plywood and install drywall, doors windows and bay windows, glass slide doors, build stairs
• conduct fork lifts and JBL lifts
• Cut wood with circular saw and sawzall
• Plumbing run new copper and pvc pipes and solder or pro press
• Train new employees and apprentice
• Install insulation
PM
National Defense University
March 2018 to June 2019
fan coil units and air handlers, rooftop units, ductless split systems pumps domestic and hvac pumps
• Change filters, grease bearings, change belts replace motors condenser and supply
• Pm air compressors and change oil, belts, clean coils and air separates change air filters
• Change 277v balance and 120v also light bulbs and tubes and troubleshoot
• Troubleshoot all types of HVACR equipment from split systems air cooled and centrifugal chillers, roof top units and pumps
• Change celling tiles
• Check for water leaks and condensation
• Fix sheet metal from rusted ducts to other equipment
• Check and change belts on exhaust fans and grease bearings
• Repipe Condensate lines on Fan coil units
• Change motors on fan coils and air handlers
Journeyman
J&O Construction
April 2016 to March 2017
• Installed and commissioned 2 to 3 1/2 ton air conditioning and heating units 14-18 seer including Trane, Carrier, Goodman and heat pumps trouble shoot and check heater banks on heat pumps and replace coils and pumps
• Plumbing- snake with k1500, k50, k39. Snaked up to 8-inch lines. Re-pipe and solder, replace fixtures
• Performed general and preventative maintenance on HVAC systems and apartments.
• Run Tickets and on call emergency
• maintain hot water boiler check pumps
• clean complex and clean up snow with blower and throw salt
• Install light bulbs and street light blinds and slabs, smoke detector, switches, outlets, light fixtures, Garbage disposal and fix, vinyl floors
• Install and maintain water heater's, install mixing valves, high pressure valves, thermocouples
• Turnover apartments, fix and repair drywall and patch
• Installed and repaired washer and dryer and replace transmissions
• Replace toilets bowls and wax ring
Apartment Properties Engineer
Avison Young
June 2013 to May 2015
• Maintained HVAC units from split systems to hot water boiler change pumps
• Replace toilet tanks and bowl and wax ring
• Installed and repaired electrical circuits aluminum to copper wire use no-lox on aluminum wire
• Installed blinds and blinds with slabs going to balcony repair wooden balcony
• Responded to emergency situations in order to resolve issues on an immediate basis
• Ran tickets and respond to emergency on call
• Handled maintenance of tools and equipment
• Replaced faulty or expired parts in an HVAC system
• turn over apartments made them look new for new resident
• Install new and repaired washer and dryer machine and smoke detector
• change locks and made keys
• Install countertops and cabinets bi-fold doors, doors, garbage disposals, dishwasher and sinks, carpet, light fixtures outlets street lights and bulbs
• Snake bathroom sinks and bathtubs with k39, snake kitchen lines and toilets line with k50.
• Snake main drains with K1500
• change locks on mailbox and copy keys
• Maintenance golf cars and change tires
• plumbing repaired leaks and frozen pipes and repipe, replace fixtures
• Worked with H.O.C
HVACR Mechanic
University Of Maryland
August 2007 to April 2013
3
• Repaired and maintain rooftop package units, low, medium, and high press steam convectors, radiators, hot water stations in heating season (boilers, steam to Hot water converters)
• Changed filters (pleated, Hepa, box filters, bag filters roll out filters), belts, greased bearings, serviced pumps, cleaned AHU coils and condensate drains.
• Worked on heat exchangers, steam converters, service and installed fan coil units, punch tubes on centrifugal chillers and pm cooling towers change belts and greased bearings. maintain mech rooms and chiller plants.
• Replaced and maintained small and heavy duty motors.
• Repaired and installed freezers, incubators and controls installed motor starters, phase monitor, installed and repaired ice machines and change water supply filter.
• Worked on all types of controls from dampers, mixing values and economizer actuators, sensors
(temp, air velocity, static pressure) freezstats, run conduit, troubleshoot
• Worked on and made graphics for controls systems to see on computers and laptop, ALC, Stefa Siemens Controls, Talon, Carrier Controls And zoning damper controls and T-stats calibrate and sensors.
• Plumbing new work solder, braze, weld steel pipe and i beams, also installed pvc, installed glass pipes for chemicals in chemistry and engineering building, ran gas lines also repaired and replaced shut off valves from 1/2" to 14.
• Serviced and replace pumps and motor check strainers and replace gasket
• Completed Apprenticeship HVACR
• check for refrigerant leaks, recover refrigerant, pulled vacuum to 500 microns or lower.
• Ran conduit for hvac equipment, installed disconnects check and replace bad fuses and troubleshoot motor control center and motor starters
• repaired leaks on coils refrigerant and steam and water Chilled and hot
• Repaired or replace exhaust fans and motors, change belts and grease bearings Electrical Technician
Electrical Maintenance Solutions
May 2005 to August 2007
• Repaired motors and replaced and service steam and hot water boilers.
• Heavy ups upgrade panels with new service entrance wire and ground to earth with ground rods and to cold water entering to house, also trace circuits with tracer install disconnects
• Installed low voltage and high 5-100v, 120v, 277v light fixtures and replace balance when needed also light bulb tubes florescent
• Troubleshoot all types of electrical fixtures and outlets
• Installed and wire hot water tanks or pipe in gas types check and replace thermocouple, gas values and pilot lights
• stock van and estimates to customer
• Ran conduit and pvc underground and around pools or water
• Ran romex, BX, MC, low voltage, data, thermostat wire
• Worked in new construction and old work
• Train new employees and apprentice
• Inspected electrical components, such as transformers and circuit breakers. Identified electrical problems with a variety of testing devices.
Education
Journeyman License in HVACR
University Of Maryland
September 2011
Skills
• CFC Universal with completion of Apprenticeship program and MD Journeyman license.10 years' experience in Hvac trade, I maintain air handling units, change filters, motors, pulleys, greased bearings, check for refrigerant leaks, recovered refrigerant, replaced condensers, plumbing braze and solder pipes, welding, and done pvc. Worked on Roof top units and Commercial building's.10 years' experience in residential Electric, Plumbing, HVAC/R (handyman) Auto mechanic. carpenter, Drywall repairs. Can read Blueprints and make prints and schematics with Microsoft works or Blueprint program
• Door Hanging
• Electrical Experience
• Fabrication
• Glass Installation
• Metal Stud Framing
• Refrigeration
• Tire Service
• Oil Change
• Very knowledgeable
• Construction
• Remodeling
• Maintenance
• Boiler
• Facilities Maintenance
• Caulking
• Lawn Care
• Landscape Maintenance
Additional Information
MD HVACR Journeyman
MD Plumbing & Gas Fitter
CFC Universal