**/**** - **/**** ***********

Aptim Maintenance LLC, Baton Rouge, LA

Our crew changed all the PS-V's and gaskets. Pulled all the old and replaced with all new and sent the old out for repairs. Also changed out two banks with valves and gaskets. Cleaned up all the areas that work was completed in. Job was a very short and quick changeover.

04/2022 - 05/2022 Tool Room Attendant

Ohmstede Industrial Services, Deer Park, TX

Inventory all tools and consumables as well as inspection of all tools and color coded according to month to help maintain safety. Check out tools at the beginning of each shift and know name and number of the person and the tool and in which vicinty of the refinery the tool was being used in. At end of shift check tools back in, de-con and inspect before putting back in its appropriate place. Job is to keep up with tool inventory and keep as many tools and consumables from walking off job site as possible. Also send all damaged tools out to be serviced, taken off of rent or replaced if beyond repair to maintain the proper tools is on site to complete the tasks at hand with the appropriate tools. Housekeeping is also a daily task as with any job to maintain as much safety and ease as possible.

03/2022 - 04/2022 Boiler Maker

Ohmstede Limited, Deer Park, TX

cleaned surface after removal of old gaskets and materials and changed out gaskets on flanges, psv's, prv's on the benzine lines out in tank farm area process side and near distillation columns. Helped flag in new pipes as well as rigging up old pipes for removal. Cleaned areas around where was working to maintain a clean and safe work environment. Occasionally would fire watch if needed to tack pipe after alignment. Four days worked in the tool-room. Maintaining and inspection the tools in the inventory. Checking out the tools and keeping track of where those tools were at the beginning and ending of each shift.

12/2021 - 02/2022 Helpers, Construction Trades, All Other Ohmstede Limited, Deer Park, TX

Unloaded all the tools and consumables in tool trailer, checked the inventory list with MALINDA GRANGER

4779 EVANGELINE HWY, STARKS, LA 70661-4354

Phone: 832-***-****

Email: aduxb9@r.postjobfree.com

Objective

Looking for a position in the construction industry, with emphasis in refineries. Preferably with a fast- paced company that allows for growth and advancements in various areas within the construction field. It would be ideal to get a position on Maintenance crew but love traveling on turnarounds seeing new places and people.

Ability Summary

Experience helping construct, assembling, maintaining and repairing stationary steam boilers, boiler house auxiliaries, aligning structures and plate sections to assemble boiler frame tanks or vats, following blueprints, work on towers and Exchangers. Work involves use of hand and power tools, levels, wedges, dogs, Measuring, cutting, grinding, fabricating pipe, engaging in cleaning of boilers, boiler furnaces, towers using wire brushes, scrapers, as well as cleaning solvents. Inspection and repairs of fittings, safety valves, regulators, installation and inspection of gaskets. Organized, eager, hard worker, as well as proficient in multitasking, ability of maintaining focus on more than one objective at a time. Employment History

what was physically there and logged it all with names and serial nos to give to PM for correct billing and records. Painted, engraved and numbered all new tools and put on appropriate shelves ready to check out when turnaround starts. Checked all tools were returned and inspected after finishing the changers and valves changed, and a list made and documented to prepare for upcoming turnaround. So trailer will be stocked and completely ready to go for the job. 10/2009 - 11/2021 Owner, E Commerce Company

T&M Customs, Starks, LA

Conduct retail activities of businesses operating online and in person, . May perform duties such as preparing business strategies, buying merchandise, managing inventory, creating specialty orders, creating mock ups implementing marketing activities, fulfilling and shipping orders, and balancing financial records. 10/2021 - 10/2021 Boiler Maker

Wyatt Field Services, Nederland, TX

Job was to pull and replace bundles

01/2020 - 03/2020 Helpers, Construction Trades, All Other Ohmstede Industrial Svc, Deer Park, TX

Construction helpers perform many tasks that require physical labor on construction sites. This job I had to perform many tasks in different areas. Fire watched, hole watched, cleaned lunchrooms and offices, worked in the toolroom handing out tools keeping logs of who and which specific tool was where well as checking the inventory of tools cleaning them up and inspecting them for damages. Used grinders buffing and cutting and Impacts and drills and doping bolts for installing gaskets. 05/2019 - 06/2019 Pipefitter

Thompson Construction, Sumter, SC

Construction crafts and helpers perform many tasks that require physical labor on construction sites. My job was to read blueprints, measure, cut, prepare, fabricate pipe and have it ready set up on jack stands or what not for welders to weld in place. As well as come in 30 minutes to hour prior to shift start, to unlock the tool room and check out tools and materials to workers to complete their job for their shift. If there were additional tools or supplies needed during shift, I would return to the tool room and check out additional tools. As well as knocking off of my fitting job hour early to be in tool room, so workers could return tools back to toolroom. I was responsible for checking in, cleaning off and then putting tools back in their appropriate place. As well as making a list of materials or tools that were out of or getting low on. If tools were not returned I had to make list of tools and who it was that did not return without prior approval for having the tool out and bring to their supervisor so that they could get the tool back or see where or why it was left out. Some nights my job along with helping fabricate pipe and tool room chores was to help with general house keeping around jobs so that helped out with keeping everyone safe and also finding tools that were misplaced.

03/2019 - 05/2019 Boilermaker

Hemi Systems, Beaumont, TX

Construct, assemble, maintain, and repair stationary steam boilers and boiler house auxiliaries. Align structures or plate sections to assemble boiler frame tanks or vats, following blueprints. Work involves use of hand and power tools, plumb bobs, levels, wedges, dogs, or turnbuckles. Assist in testing assembled vessels. Direct cleaning of boilers and boiler furnaces. Inspect and repair boiler fittings, such as safety valves, regulators, automatic-control mechanisms, water columns, and auxiliary machines. Changed multiple gaskets on some heat exchangers. A few jobs I fire watched for the welders to weld in the new pipes and plates on structures that were in areas that have live units where flammables were present. Also drove the crew in and out of the plant from the front gate to the contractor tent. I also worked in the tool trailer and handed out the tools and also returned tools at end of the shift to the appropriate place in trailer. Once a week cleaned, organized the tool trailer and took inventory on tools and supplies that were missing or low so that we could order more to complete the job.

05/2019 - 05/2019 Boilermaker Helper

Ohmstede Industrial, League City, TX

Construct, assemble, maintain, and repair stationary steam boilers and boiler house auxiliaries. Align structures or plate sections to assemble boiler frame tanks or vats, and other large vessels that hold liquid or gasses while following blueprints. Work involves use of hand and power tools, plumb bobs, levels, wedges, dogs, or turnbuckles. Assist in testing assembled vessels. Direct cleaning of boilers and boiler furnaces. Inspect and repair boiler fittings, such as safety valves, regulators, automatic-control mechanisms, water columns, and auxiliary machines. Fire watched, hole watched, done housekeeping in area of jobs, doped bolts for putting in new gaskets used impacts to install. Helped pipe fitters and welders with their tasks. 01/2019 - 03/2019 Helpers, Construction Trades, All Other Ohmstede Industrial, DEER PARK, TX

Construct, assemble, maintain, and repair stationary steam boilers and boiler house auxiliaries. Align structures or plate sections to assemble boiler frame tanks or vats, following blueprints. Work involves use of hand and power tools, plumb bobs, levels, wedges, dogs, or turnbuckles. Assist in testing assembled vessels. Direct cleaning of boilers and boiler furnaces. Inspect and repair boiler fittings, such as safety valves, regulators, automatic-control mechanisms, water columns, and auxiliary machines. Watched for fires, helped with housekeeping in work areas, worked in tool room for two weeks training new tool room attendant with her duties and how to do inventory, inspect the tools, Mark new tools with company logo & tool no, as well as proper names of tools. Taught how to make a boilermaker set up, so that beginning of shift it would help get the boilermakers out of toolroom and on the job quicker if have 10 or more made up prior to shift. Used various tools on job from tape measure, screwdrivers to impacts and drills. As well as office work and tools in the toolroom for use of inventory.

09/2018 - 11/2018 Pipefitter

Gulfspan Industrial LLC, Beaumont, TX

Cut out old pipe and valves and lay out, assemble, install, or maintain pipe systems, pipe supports, or related hydraulic or pneumatic equipment for steam, hot water, heating, cooling, lubricating, sprinkling, or industrial production or processing systems. Cut, bevel, thread new pipe. Run tools from the warehouse and tool room to various jobs to get the hot jobs done quicker and efficiently. Replaced blinds, gaskets, flanges. Run hydros on lines checking for leaks and issues before put back online and product going through new pipes and valves. Wrote up JSA on every job and read to crew so that everyone was aware of job, dangers and things we could do to avoid dangers for everyone to sign for each and ever job that we were to do prior to doing the job. . Used various hand tools as well as electic and pneumatic tools. 02/2018 - 03/2018 Pipefitter

Ohmstede Limited, Beaumont, TX

Cut, thread, or hammer pipes to specifications, using tools such as saws, cutting torches, pipe threaders, or pipe benders. Lay out full scale drawings of pipe systems, supports, or related equipment, according to blueprints. Assemble or secure pipes, tubes, fittings, or related equipment, according to specifications, by welding, brazing, cementing, soldering, or threading joints. Measure and mark pipes for cutting or threading. Inspect, examine, or test installed systems or pipelines, using pressure gauge, hydrostatic testing, observation, or other methods. fire watched, hole watched, housekeeping around work site as well as throughout the unit when work was slow or on standby. Helped out in the tool room handing out logging tools in and out to keep track of tools and inventory.

10/2017 - 11/2017 Pipefitter

Ohmstede Industrial Services Inc., DEER PARK, TX

Lay out, assemble, install, or maintain pipe systems, pipe supports, or related hydraulic or pneumatic equipment for steam, hot water, heating, cooling, lubricating, sprinkling, or industrial production or processing systems. Cut out old pipe, measure, grind, clean and prep new pipe for installation. Fire watched hole watched, general housekeeping around work area an in unit. Helped out in running tools from one job site to the other to move job progress along. Cleaned offices and helped with paperwork that needed be filed and wrote up for the shift as well as being the person to write up my crews JSA for us and go over it with all the crew before they each signed it for every job.

05/2005 - 01/2008 Co-Owner/Operator

T&M Customs, Orange, TX

Cover roofs of structures with shingles, slate, aluminum, wood, metal or related materials. Sprayed roofs, sidings, and walls with material to bind, seal, insulate, or soundproof sections of structures. Erected small metal buildings on customers site or built porches with new metal roofs. Used power saws, drills, nail guns, screw guns, caulking guns other small job related tools. Wrote contracts up, kept records of jobs and warranties on jobs for company and customers.

12/2005 - 03/2006 Helpers, Construction Trades, All Other Nichols Construction Company LLC, Sulpur, LA

Perform tasks involving physical labor at construction sites. Operated hand and power tools of all types: air hammers, earth tampers, cement mixers, small mechanical hoists, surveying and measuring equipment, paint guns, paint brushes, pressure washer, computers, and a variety of other equipment and instruments. Clean and prepare sites, dig trenches, set braces to support the sides of excavations, erect scaffolding, and clean up rubble, debris and other waste materials. Pressure washed privacy fence, changed out rotten boards then whitewashed and treated wood. Organized cleaned up in warehouse. Got variety tools and supplies ready for an upcoming turnaround checking the invoices against tools and Supplies that were physically there to be wrapped up in saran wrap to be delivered to job site. Helped out in the office with some filing data entry and cleaning. 03/1999 - 10/2005 Boilermaker

Turner Industries Group LLC, Sulphur, LA

Worked in the boilers mostly changing out exchangers, cutting out tubes, or blowing out tubes in water box, worked on the drag chains also; Helped cut out tube panels and was learning to tack weld some of the tubes that did not have to be ex-rayed; etc. prepping; grinding, tearing out gasket materials and replacing them. Doping bolts to bolt up new gaskets. Assisting on turbines Deck with millwrights. Helping build scaffolds. Worked tool room for several years handing out, keeping track of tools; inspecting and making sure they were all returned to the tool room and put back in its appropriate place. Ordering new tools as needed and going to company warehouse to have tools loaded into the truck. Worked several years at the gate, which entailed logging people in and out of the plant and checking their items to make sure none of our tools were going out and turning in the time sheets to timekeeper for payroll to make sure that the time they were logged in at the gate matched time claimed on timesheets. Gate duties were to also check company trucks that were being brought into the plant, to make sure there were no bombs etc being brought in. I had to check under hood, under Vehicle as well as whatever was being brought in on inventory sheet is the only thing being brought into the plant. Worked several months driving the truck as expeditor to and from each individual job to bring tools to the appropriate job to help job production and to get units back up and running as fast as we possibly could. If a hole watch or fire watch was needed I would occasionally do that as well. Worked on maintenance crew for quite a while so with that being said though official title was boilermaker after finally being able to take my test with them, my job was to actually help in any and all areas that needed help rather it is on a shovel, shoveling out ash, or what have you to actually working the boilers, exchangers etc. I actually started out with them making $10.50 an hour and worked up after passing the test to 21.75 during turnaround, I also supervise run the labor crews during a short turnaround. My duties entailed working alongside them still doing my duties helping them just with a radio and with paperwork to do and a dollar more an hour during turnarounds. I had to Oversee that they were on their job, shoveling, hole watching, fire watching or even picking up trash out of the units. I used a variety of different tools in different fields at the Energy plant in Westlake Louisiana.

10/1997 - 02/1999 Helper

International Maintence Corporation, SULPUR, LA

Performed many tasks that require physical labor on the construction sites. Helped in boilers, drag chains, water boxes, turbines. Wherever needed. Hole watched, fire watched. Worked tool room and guard gate. Helped whichever craft was in need of a go-fer or needed a person to grind and prep material for replacement to even just a person to sharpen tungsten for welder. My job was learning a little of each trade and helping wherever needed. Was tool runner for biggest part of the job, especially during turnarounds.

03/1996 - 05/1996 Laborer

Construction Excellence CONEX, BEAUMONT, TX

Perform tasks involving physical labor at construction sites. Operated hand and power tools of all types: air hammers, earth tampers, cement mixers, small mechanical hoists, surveying and measuring equipment, and a variety of other equipment and instruments. Cleaned and prepare sites, dig trenches, set braces to support the sides of excavations, erect scaffolding, and clean up rubble, debris and other waste materials. Assisted other craftworkers. Worked in toolroom helping learn what names of tools were and handing them out to workers at beginning and end of shift to get everyone on job and to then return all tools to proper place so that everyone could have their job done when it was quitting time. I helped out wherever I was needed. Climbed towers helping to clean packing out while they were changing and installing new blinds. I would get tools in and out of man basket and hand to craftsmen inside towers to keep them from coming in and out. 02/1992 - 05/1994 Store Clerk Cashier

Whites Cheveron, ORANGE, TX

Performed cash register duties, using new upgraded cash registers that just were installed from the old one that you had to physically type in the price of every item and if it were grocery gas etc. to learning the new scanning system and doing inventory of store and putting it in the new system. Cleaned stocked and ordered inventory for store. Priced inventory as it came in the store off trucks. Eventually progressed to shift manager and trained new workers to work register's lottery machines, gas machines. How to read the gas levels and report it to order more gas when getting low. Helped to promote the new commission based car wash that was installed where workers were able to get an additional percent on their check for every car wash they sold especially if it was a works' carwash. Helped to make contest out of the commission car washes and hand out the prizes. Turned in all paperwork and helped bookkeeper, Miss Betty Mott, to do timesheets for payroll and make upcoming schedules for workers. Cleaned restrooms, parking lot and premises around the store to keep nice and tidy.

10/1991 - 02/1992 Bartender Server

Greys Pub, Orange, TX

Job was to stock coolers, clean the bar, bathroom, talk to and basically entertain customers. Make mixed drinks on demand and serve Alcohol as well as making up jello shots for the next shift. Pay attention to customers needs and make sure no fights break out an everything flows smoothly. Count down teal and do inventory and restock after shift is over to make ready for next day or shift. Help train new barmaids or servers that were just hired for weekends or holidays 04/1991 - 10/1991 Bartender Server

Spare Time Lounge, Orange, TX

Job was to drinks to customers it was an alcohol only establishment with snack food. Customers could bring their own Alcohol to mix their drink. Make hot dogs nachos, chili, barbeque on occasion, clean the dishes, bar, restrooms, restock the cooler and count teal at end of shifts and make money ready for owner to pickup and make bank at end of the night. Customer service and being quick on your feet so that people didn't have to wait is the main thing other than being a great listener to other peoples issues as where there were times people came just to spill their guts about the problems they are going through while having a few drinks. 03/1990 - 09/1990 Score Keeper/ Registar

Ripley I77 Speedway, Ripley, WV

Job was to register each racer take their money give them their race number as well as have them to sign al release forms in case of injuries and what not. to keep track of scores and record scores in logs. When races were over hand out trophies and ribbons as well a help if needed at the concession stand then help clean the grounds from trash and debris after everyone was gone, and we locked up speedway except for workers still presently working.

10/1989 - 12/1989 Construction Craft Laborer

Construction Excellence CONEX, Beaumont, TX

Perform tasks involving physical labor at construction sites.operate hand and power tools of all types: air hammers, drills, Impacts, grinders, small mechanical hoists, surveying and measuring equipment, and a variety of other equipment and instruments. Cleaned and prepared sites, dig trenches, set braces to support the sides of excavations, erect scaffolding, and clean up rubble, debris and other waste materials. Assisted other craftworkers with installing material in the towers as well as taking old packing and trays out. Worked in toolroom learning how to keep track of tools, handing them out and learning the names and what they were used for. Criminal Justice

No degree provided

Lamar University Orange texas,, None Selected

studied criminal justice working on criminal justice degree. could not finish cause was too hard working 84 plus hours a week and going to school full time Master Arts

Vocational School Certificate

International Correspondence School, Scranton, PA

I studied basic art and also computer programming. I fully completed the Master Arts program and have a certificate, but I did not complete my computer programming course due to financial obligations Education History

General High School Curriculum

High School Equivalency Diploma

Lamar State College, Beaumont, TX

Took GED tests and College Placement test. Must score 40 or above on all five test; Or an average of 45. Passed the tests with the following Scores. US percentile Test 1: Writing Skills 44 ;27

Test 2: Social Studies 48 ; 41

Test 3: Science 48 ;41

Test 4: Reading Skills 41 ; 33

Test 5: Mathematics 49;47

art

High School Diploma

High School, Ravenswood, WV

03/202*-********

NCCR

10/2021 Basic Plus Safety

Safety Council

11/2017 TWIC card

TWA.gov

Willing to relocate. Available to start work immediately. Willing to learn and open to on job training, internship,

Desired OccupationBoilermakers

Desired Salary$31.25 hourly (Approx. $65,000 annually) or more Occupational Licenses, Certificates and Training

Honors & Activities

Several debates, and artistic awards in high school. Belonged to the college Criminal Justice Society Alumni. Air brushing, face painting, and T-shirts for school church and social events. Make wreaths from flowers, fabric, and deco mesh as hobby and part-time business. Took master arts course. Studied Criminal Justice fields in college

Additional Information

Detailed References

Cory Halbert, Foreman

Ohmstede

Orange, TX 77630

aduxb9@r.postjobfree.com

409-***-****

Euell Boyles, Project Manager

Ohmstede Industrial

194 Trace Road

Monticello, MS 39654

aduxb9@r.postjobfree.com

832-***-****

Additional Employer Searchable Items -

Desired Job LocationCalcasieu Parish

Desired Job Type

Drivers LicenseClass C - Standard Drivers License

Security ClearanceNo Clearance

Job Skills236 skill(s)

Tools and Technology155 Technology

655 Tools

Typing Speed80 wpm

Language/ProficiencyEnglish / Very Well

Days : Sun, Mon, Tue, Wed, Thu, Fri, Sat

Shifts : Day, Evening/Swing, Night/Graveyard, Rotating Employment Type : Regular

Full or Part Time : FT

Willing to Travel : Yes

Willing to Relocate : Yes

Willing to Telecommute : Yes

Contact this candidate