JOHN DARWIN C. CHUNG

QA/QC MECHANICAL ENGINEER

WITH 15.5 YRS. WORKING EXPERIENCE

BLOCK 8 LOT 41, SAN MARINO CITY,

DASMARINAS, CAVITE, PHILIPPINES 4114

MOBILE #: +639*********

EMAIL ADDRESS: adutm6@r.postjobfree.com

Professional Profile

I have Bachelor’s Degree in Mechanical Engineering, with 15.5 years of experience in the field of Mechanical, Rotating and Static Equipment, Installation, Servicing, and Commissioning. I have extensive knowledge with shut down works, oil and gas, power plant system, knowledge in aero derivative, HRSG and steam turbine. Knowledge in piping GRE, HDPE, GRP and RTR Pipe.

I have proven record of expertise in hydro test, air blowing, pneumatic test, heat exchangers installation, gas injection, glycol transfer pump, vacuum pump, sea water injection, hot oil pump, air compressor, vapor recovery compressor, recirculation pump, SWRO unit, module and other static equipment and knowledge in installation of internal tray of vertical and horizontal vessel.

Work Experiences

Position: QA/QC Engineer 16 Feb 2020 – 30 Apr 2020

Company: GSCA (Shutdown only)

JOB DESCRIPTION:

Responsible for performing Quality Assurance (QA) activities and implementing QA under the direction of a Quality Control (QC) Module/Piping Supervisor.

1.Inspector will perform assigned inspections and monitor progress and success in assigned functional area during the construction of a major oil and gas petrochemical and power plant.

2.Position coordinates with the construction and engineering organizations for QC inspections and construction monitoring as necessary to verify performance of construction activities to the requisite codes, standards, specifications and drawings.

3.Implements QA/QC programs to meet assigned project requirements.

4.Ensures the effective implementation of the quality program in the area of assigned responsibility and ensures that the appropriate materials and equipment are available for inspection and test. Inspector will assist QC Supervision with determining the extent and applicability of the quality program to the assigned functional area.

5.Establishes and maintains client and subcontractor relationships to assure free communication of information and reasonable resolution of quality problems so that quality goals are attained with minimal rework and repair.

6.Provide periodic reports to QC supervision regarding the effectiveness of the quality program.

Project Undertaken:

PETRO RABIGH COMPANY (PRC) - turnaround

Position: QA/QC Mechanical Inspector 4 Oct 2018 – 10 June 2019

Company: Doosan Heavy Industries

JOB DESCRIPTION:

●Perform all daily inspection and test of the scope and character necessary to achieve the quality of construction required in the drawings and specifications for all works under the contract performed ON or OFF site.

●Cary out inspection and checking for all quality related procedures in the site and ensures activity at the site are as per approved method statement and inspection test plan.

●Coordinate with the consultant’s representative and Site in-charge for inspection and meeting about quality problems including the closure of non-compliance report.

●Report to the QA/QC Manager, control, and monitor all activities related to Quality Management System (QMS).

●Taking care of QA/QC documents of the entire project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered and other QA/QC documents. Responsible for the closure of non-conformance, NCR and site instruction (SI).

●Responsible for the quality and workmanship of every activity, thorough knowledge of all phases of engineering construction relating to mechanical and piping discipline interfacing the multidisciplinary operations.

●Develop method statement for the activity including risk assessment and job safety environmental analysis and inspection Test Plan and Checklist based on specifications of the project.

●Carry out Internal Audit at the site as scheduled in the Project Quality Plan (PQP).

●Liaise the technical engineer for submission of material submittals to consultant.

●Plan and execute piping projects to ensure maximum productivity while keeping an optimum level of quality.

●Eliminated employee injury incidents while in supervisory role by fostering team awareness of safety processes and carefully and continuously supervising staff operations.

●Ensure that all subordinates are trained and knowledgeable of specifications and work procedures and that work is being performed in conformance with specified quality requirements.

●Play an active role in the development of the safety culture on the project, making safety a natural part of all work performed.

●Site supervision pertaining to structural and piping erection as per design and specifications.

●Project coordination with other discipline such as civil, E&I, insulation and painting.

Project Undertaken:

FADHILI POWERPLANT CO-GEN COMPANY (FPCC)

Position: Mechanical Engineer Rotating/Static 14 Feb 2017 – 14 Feb 2018

Company: DAE-AH Construction & Engineering

JOB DESCRIPTION:

●Monitor and assign/follow up work with Site Engineer/subcontractor in accordance with company’s policies and procedures and limits of authority. Carry out all site activities related to mechanical works as per drawings, standards and specifications.

●Preparation and follow-up of inspection requests and coordination of inspection with client’s consultant.

●Quality assurance and quality control in the areas of engineering and construction.

●Work closely with consultants/contractors for all site related matters and evaluation of incoming problems, reviewing of drawings and technical submittals.

●By running tests with specialized machines to determine proper quality standards, monitors and controls site activities to ensure proper execution of projects as per time schedule, specifications and relevant standards.

●Participation in daily and weekly site progress and coordination meetings.

●Provide regular feedback and accurate reporting to Manager on the status of work.

●Control all work in their area of accountability through the implementation and compliance with the Permit to Work process to prevent any undue risks or unsafe acts.

●Supervise and develop turbine technicians.

●Coordinate quality assurance and support all engineering disciplines in overhaul/repair plant equipment.

●Managing turbine tool stores and provide tools for field technicians.

●Develop and review procedures, work instruction for workshop activities.

●Prepare and complete relevant QA/QC documentation for the activities when required.

●Follow use SAP to manage notifications, work orders, parts ordering, and job history recording. Lead contractor staff in the planning and execution of their work as required.

●Responsible in fabrication and installation of different types of piping system.

●Interpret P&ID, isometric, general arrangement of drawings prior to fabrication and installation of spools.

●Preparation of drawing, tools and materials to be used. Cleaning and grinding of all pipes bevel prior to fit up and tacking

●Encoding of all finished productions, fit up/welding and preparing all the materials needed by day-to-day duty.

●Managing daily manpower.

●Checking and preparation of RFI of fit up and welding.

●Read and interpret the isometric plan used for erection of pipe.

●Marketing, preparing and cutting of pipes used for the fabrication and erection.

●Cuts and bevels pipe using cutting torches, saws, threading machine and pipe cutting machine.

●Responsible for complete execution of work orders for specific jobs.

●Responsible in following blue prints.

●Responsible to assemble and install piping.

●Cuts and selects specified type and size of pipe.

●Assist to install valves, couplings and other fittings. Also, disassemble and remove damage worn pipes.

●Connects pipes using threaded, caulked, soldered, brazed, fused or cemented joints and hand tools.

Project Undertaken:

ZATHA AL RAZBUT (Zirku Island)

Position: Mechanical Engineer 27 June 2013 – 27 July 2016

Company: Hyundai Heavy Industries

JOB DESCRIPTION:

●Maintenance and erection of rotating and static equipment like electric motors, generator turbines, air compressors and pumps with vertical and horizontal vessels.

●Supervision of all kind of fabrication works.

●Maintenance, installation and commissioning of mechanical and static equipment water pipeline installation and inspection works.

●Alignment of rotating equipment and supervision of mechanical workshop.

●Interpretation of drawing and coordination with the contractors to execute work as per requirements.

●Checking fit-ups arranging the resource selection and of require materials as per the drawing and codes.

●Selection of standard supports requirements and fabrication as per drawing and codes.

●Resolution of site issue and request.

●Ensure that the work is carried out as per standards drawings maintaining quality and safety.

●Supervise the work and give necessary clarification to contractors as required.

●Make day-to-day planning and monitor the progress at site arrange stage wise inspection as required and get clearance from competent authority.

●Scrutinize contractor’s bills and submit to site in-charge, follow up for materials to ensure continues supply and smooth fabrication as well as erection.

●Appraise the client about progress and quality work; follow up of all non-conformance report and preparation of site engineering request.

Projects Undertaken:

1.JUAYMAH POWERPLANT

2.SHEDGUM POWERPLANT

3.UTHMANIYA POWERPLANT

4.JIZAN REFINERY

Position: QA/QC Mechanical 7 Mar 2011 – 7 Mar 2013

Company: Anelksa (Contracting Division)

Riyadh, Saudi Arabia

JOB DESCRIPTION:

Reporting to the Quality Manager, the Quality Inspector’s responsibilities include, but are not limited to

●Examine inspect field conditions and ability to identify problems, inaccuracies, and cost saving measures that arise or that may be encountered. Take corrective actions as needed.

●Inspect subordinates’ work for compliance with the contract plans and specifications, point out deficiencies, explain, and take any corrective action needed.

●Understand and implement lock-out/tag-out procedures in a safe manner

●Listen to other employees and supervisor's suggestions, complaints, problems, safety concerns and recommendations, evaluate each, then devise, and implement a plan of action based on that evaluation.

●Understand and respond appropriately to all safety hazards and warning devices, i.e. back up alarms, smell of smoke, warning tags, warning sirens).

●Identify safety hazards you or other employees may be subject to and take all necessary corrective actions to eliminate or minimize hazards.

●Review/approve (initial/date) all 3rd party test results for compliance with project requirements as required.

●Provide training to crafts regarding the project specific quality process and requirements for areas of responsibility.

●Assist with quality plan implementation reviews and job tours/walk around and participate in weekly quality meetings as required.

●Be involved in and provide QA/QC input to task planning meetings.

●Develop an understanding of project scope and Quality requirements as they pertain to your specific area of responsibility.

●Be a liaison with and coordinate third party testing and authorized inspection agencies.

●Perform inspections and tests as required by the assigned responsibilities and as directed by supervisor.

●Coordinate with the district office for needed codes, standards and procedures.

●Perform all other job-related duties as requested by supervisor.

Projects Undertaken:

1.PRINCESS NORA BIN UNIVERSITY (PNU)

2.KING SAUD UNIVERSITY

Position: QA/QC Mechanical 23 Jan 2007 – 23 Jan 2011

Company: Consolidated Contractors Company

Doha, Qatar

JOB DESCRIPTION:

●Responsible for performing Quality Assurance (QA) activities and implementing QA programs under the direction of a Quality Control (QC) Module/Piping Supervisor.

7.Inspector will perform assigned inspections and monitor progress and success in assigned functional area during the construction of a major Power Plant.

8.Position coordinates with the Construction and Engineering organizations for QC inspections and construction monitoring as necessary to verify performance of construction activities to the requisite codes, standards, specifications and drawings.

9.Implements QA/QC programs to meet assigned project requirements.

10.Ensures the effective implementation of the quality program in the area of assigned responsibility and ensures that the appropriate materials and equipment are available for inspection and test. Inspector will assist QC supervision with determining the extent and applicability of the quality program to the assigned functional area.

11.Establishes and maintains client and subcontractor relationships to assure free communication of information and reasonable resolution of quality problems so that quality goals are attained with minimal rework and repair.

12.Provide periodic reports to QC supervision regarding the effectiveness of the quality program.

Projects Undertaken:

1.CHIYODA, TECH-NIP JOINT VENTURE

2.RAS GAS

Position: Quality Control (Welding) 20 Nov 2001 – 22 Nov 2006

Company: Ecoseas Maritime (Dubai, UAE)

Al-Jhaddaf Compound Area

JOB DESCRIPTION:

●Determine factors that influence the quality of fusion welds in recognize characteristic of commonly used welding process in relation to quality. Interpret drawing instructions and symbols to ensure that specification are met.

●Set up report on inspection welds, macro section and other mechanical test. Assist and report on welds to acceptance levels. Confirm that incoming materials stipulated requirements and recognize the effect on weld quality from specification interpret isometric.

●Familiarize and give proper instruction on the standards, rules and specification.

●Provide instruction on the welding process/procedures to be use in production.

●Responsible with providing the proper testing methods.

●Observe safety measure in the work area.

Educational Attainment

COLLEGE:

Bachelor of Science in Mechanical Engineering (5 yr. course)

Mindanao State University (MSU-IIT), Iligan City, Philippines

Date Graduated: March, 26 1998

SECONDARY:

National School of Fisheries, Buru-un, Iligan city, Philippines

Date Graduated: March 1993

PRIMARY:

Sero Elementary School, Rosary Heights, Cotabato City, Philippines

Date Graduated: March 1989

Professional Eligibility

Mechanical Engineer

Computer Literacy

Introductory knowledge to Microsoft Word & Excel.

Introductory knowledge to 2D and Isometric using AutoCAD 2010.

Introductory knowledge to Three Dimensional Technical Drawing Using AutoCAD 2010 and Adobe Photoshop.

Computer Literate: MS Word, Excel, Auto CAD, Autodesk Inventor, MS Project, Micro station, HAP, and HASS.

Equipment Handled

Diesel Engine, Diesel Generator, HRSG, Steam turbine, GTG Aero derivative turbine, Horizontal pumps, Vertical Pumps, Submersible pumps, Compressor, Vacuum pumps, Trash rake, Conveyor, Cooling tower, Storage tank, Pressure vessel, Flood gate, Fire pump, Chilled water Pump, AHU, FAHU, Aerator, Dehumidifier, and many other.

Co – Curricular Achievements

Member of Philippine Society of Mechanical Engineers (PSME), KSA – Chapter

President of Mechanical Engineering Student Organization

President of Engineering Student Organization

President of Book Lovers Organization

Strengths’

Hardworking

Open-minded

Good interpersonal and communication skills

Comprehensive problem solving abilities

Personal Data

Permanent Home Address

:

Block 8 Lot 41, San Marino City, Brgy. Salawag,

Dasmarinas, Cavite, Philippines 4114

Place of Birth

:

Salvador, Lanao del Norte

Date of Birth

:

August 15, 1977

Blood Type

:

O+

Nationality

:

Filipino

Contact this candidate