Brent P. Cooper

Gresham, OR.

Phone: 971-***-****

E-mail: adut1o@r.postjobfree.com

Qualifications:

* Ten plus years of experience as a component level repair, test, and assembly

technician in both consumer repair and manufacturing environments.

* Exceptional mechanical aptitude.

* Excellent computer skills with experience in nearly all versions of Windows,

M.S. Office Suite, including Excel, Source Level Debuggers, Unix, and various types

of work order processing and shipping software.

* Ability to read and interpret schematics, blueprints, and assembly drawings and

effectively use them in troubleshooting and assembly procedures.

* Ten plus years of soldering experience in both through hole and fine pitch S.M.T.

Have been I.P.C. J – Standard 001 level 3 certified twice.

* Ten plus years of experience with most types of test equipment and hand tools.

* Understand and follow E.S.D. standards and practices.

* Over three years of experience as an electrical control panel technician.

Experience:

Electrical Test Technician, Cascade Controls, Troutdale, Oregon 02/22 to 09/22

* Perform point to point testing on industrial electrical control panels, many of which

are used in the semiconductor industry.

* Testing also includes high voltage / leakage current testing and live circuit testing.

Manufacturing Equipment Technician, Intel Corp., Hillsboro, OR. 10/19 to 01/22

* Perform periodic maintenance and routine operation, set-up, and recovery procedures

on Metrology and Lithography tools at the Ronler Acres facility. Am currently level

2e certified on CD SEM (Hitachi CG5000 and CG6300) tools, level 1e on KLA

Tencor Registration tools, and level 1e OCD (Optical Critical Dimension) tools.

Electronic Repair Technician, Adecco Staffing, Portland, OR. 07/19 to 10/19

Contracted to: C.T.D.I. Inc., Fairview, OR.

* Perform complex test, diagnosis, and repair procedures, to the component level on

set – top boxes (cable boxes) in a Comcast depot repair facility.

* Final test all units repaired before sending them to burn in.

Electronic Test Technician, National Engineer Staffing Corp., Portsmouth, NH.

01/19 to 03/19

Contracted to: Collins Aerospace, Wilsonville, OR.

* Perform complex testing and calibration on projectors used in military and

commercial flight simulators, following complex work instructions and torque specs.

* Troubleshoot and diagnose projectors that fail initial testing procedure.

* Perform testing and calibration on optical module assemblies used in the projectors.

Robotics Technician, CBRE Maintenance, Troutdale, OR. 06/18 to 01/19

Contracted to: Amazon, Troutdale, OR.

* Repair and perform preventative maintenance tasks on robotic drive units used on the

Amazon warehouse floor. Use an Amazon Kindle tablet to electronically control the

drive units and the robotic floor area. Recover / restart failed drive units on the floor.

Electrical / Electronic Test Technician, Staffing Firms, Portland, OR 02/18 to 05/18

* Had two very short term temporary positions with Superior Group Staffing / LAM

Research and Aerotek Staffing / OECO / Meggitt both as test technician.

Electrical / Electronic Technician, Schmitt Industries, Portland, OR 02/16 to 02/18

* Perform complex assembly procedures building wire and cable assemblies made to

control industrial balancers used in the machining industry. Also perform

modification procedures on electronic circuit boards also used in controllers.

* Perform all testing, packaging, and serializing on finished assemblies.

Manufacturing Technician, Staff Finders, Beaverton. OR 08/15 to 01/16

Contracted to: Intel Corporation, Aloha, OR

* Perform set up procedures and run complex material handling machinery / tools in

the Die Prep department. Learned and followed exact set up / operation procedures

and am now certified to Intel’s standards on two tools / machines.

Controls Automation Technician, Volt Technical Resources, Portland, OR.

04/15 to 06/15

Contracted to: D.W. Fritz Precision Automation, Wilsonville, OR

* Perform various duties involved in the production of industrial control panels used in

automated manufacturing systems including preparation of wiring, building cable

assemblies, building hardware sub-assemblies, and assembling and wiring the panels

from mechanical and schematic drawings.

Prototype Assembly Technician, Aerotek, Portland, OR 04/14 to 03/15

Contracted to: OECO / Meggitt, Milwaukie, OR

* Perform various tasks involved in the assembly of components used in the aerospace

industry including building and modifying complex electronic circuit boards,

electrical, and mechanical assemblies for the prototype department.

* Perform high level through hole and surface mount soldering to I.P.C. class 3

standards. Also performed much rework and repair for the prototype engineers.

Industrial Control Panel Technician, Integrated Systems Group, Vancouver, WA

09/13 to 04/14

* Fabricate, assemble, and point to point wire industrial electrical control panels.

* QA / QC completed control panels including physical / mechanical inspection, point

to point wiring testing, and power testing.

Industrial Control Panel Technician, Aerotek, Portland, OR 04/13 to 09/13

Contracted to: Cascade Controls, Portland, OR

* Perform assembly duties on industrial control panels including fabrication, wiring,

and doing repairs after panels are sent back from QC

Metal Fabrication Shop Helper, Stewart Fabrication, Milwaukie, OR 11/01 to 04/13

* Cut, grind, and finish sheet and plate metal for various custom installations.

* Also layout metal and perform much drilling and tapping using a hand drill, drill

Press, manual taps, and tap gun.

Assembly Technician, Altech Services Inc., Parsippany, NJ 01/12 to 03/12

Contracted to: United Streetcar, Clackamas, OR

* Performed various fabrication and assembly duties involved in building streetcars.

* Duties involved using almost every type of hand and power tool, drilling and tapping

installing windows, floors, doors, and seats, working from blueprints with all

measurements in millimeters.

* Also performed wiring and cabling duties including stripping, crimping, dressing,

and terminating with appropriate connectors.

Appointment Setter, Farmers Insurance, Beaverton / Tigard, OR 03/09 to 07/10 * Contacted potential customers and gathered information on their auto, home, and life

insurance needs.

Grinder, Aerotek Commercial Staffing, Portland, OR 07/07 to 12/07

Contracted to: Precision Cast Parts Corporation, Clackamas, OR

* Hand ground various cast parts to meet customer specifications for size and shape.

* Performed some sandblasting and material handling tasks using an overhead

crane and pallet jack.

Appointment Setter, American Independent Mortgage, Portland, OR 02/03 to 08/06

* Contacted potential customers and invited them in to talk to our loan officers about

the advantages of refinancing their homes or debt consolidation.

Repair Technician, All Service Music Electronics, Portland, OR 09/05 to 02/06

* Repaired all types of sound equipment from musical to home audio.

* Ordered parts, checked on existing parts orders on a weekly basis, contacted

customers with estimates, and contacted customers when repairs were complete

and / or ready to pick up.

Electronic Repair / Rework Technician, Kelly Services, Beaverton, OR 04/03 to 08/03

Contracted to: Welch Allyn Protocol, Beaverton, OR

* Tested, diagnosed, and repaired vital signs monitoring equipment to the component

level using a digital multimeter, oscilloscope, and various hand tools.

* Performed much fine pitch surface mount soldering.

Calibration Technician, Polyvision Corporation, Beaverton, OR 04/01 to 02/02

* Calibrated and tested electronic laser tracking white boards after they were built.

* Repaired defective units as necessary.

Repair Technician, Staffmark Technical Staffing, Beaverton, OR 10/00 to 04/01

Contracted to: A.D.P. Dealer Services, Portland, OR

* Troubleshoot and repair laser printers to the board or mechanical part level using a

using a digital multimeter and various hand tools.

Electronic Repair Technician, Northwest Computer Support, Tigard, OR 06/98 to 10/00

* Troubleshot and repaired computer monitors and terminals to the component level.

* Repaired and refurbished ink jet and dot matrix printers.

Manufacturing Technician, Microtek International D.S.D., Hillsboro, OR 01/94 to 06/98

* Assembled, tested, debugged, and repaired In-Circuit Emulators to the component

level.

* Performed much surface mount and through hole soldering.

* Used digital multimeter and oscilloscope to troubleshoot defective circuit boards.

* Loaded firmware onto EEPROM I.C.s using Unix computer systems.

* Performed kit pulling, packaging, and shipping / receiving duties as needed.

Education And Certifications:

A.A.S. Degree in Electronics Engineering Technology

Oregon Polytechnic Institute, Portland, OR

National Career Readiness Certification (Gold Level)

I.P.C. J-Standard 001 Class 3 Soldering Certification

Contact this candidate