Power Plant Engineer Electrical
Resume:
Tunis, Tunisia
*******.********@*****.***
LANGUAGE
• Arabic: Mother Tongue
• French: Excellent
• English: Fluent
Mohamed Yaccoubi
Electrical Manager
RESPONSIBILITY & KEY SKILLS
• Contract Management and control disputes (claims, payments and contract closeout)
• Review and approve project schedule and implementation strategy in various phases of project.
• Management of resources and time in accordance of project difficulties.
• Responsible and accountable of installation during execution phases.
• Lead/Supervise operational efforts during construction & commissioning phases
• Plan/schedule work in accordance with project interfaces and difficulties
• Prepare/approve work method statement procedure in accordance with Engineering and project specification
• Conducts meetings with construction team, commissioning team, vendors and clients.
• Attend and witness FAT’s & SAT’s and approval reports as necessary.
• Lead the teams to strategize, prepare, plan and execute the contractual scope.
• Coordinate with all stakeholders (Client, Project Management, Construction management, Vendors, Subcontractors and Third Parties) for the expedient and safe delivery of the scope above.
• Prepare system/sub-system break up for sequential commissioning of project.
• Prepare/review Pre-commissioning and commissioning procedures.
• Develop protocols/formats for taking over system/subsystem from Construction and further complete pre-commissioning and hand over system for commissioning.
• Interact with Consultant/Customer to ensure all protocols are timely accepted and system is handed over immediately after commissioning.
• Interact with Construction team and vendor representatives to clearly convey requirement in order to achieve commissioning of the project safely.
• Approves designs and verifies that facilities are built to the relevant specifications and standards.
Page 2/5
• Prepare/approve commissioning procedures in accordance with manufacturers’ recommendations and company guidelines.
• Prepare/approve work method statement procedure in accordance with Engineering and project specification.
• Provides structured Training and development for Electrical Team.
• Ability to work effectively in a multidisciplinary team environment.
• Sign /approve LOTO PTW in accordance with (Lock-out/ Tag-out) procedures.
• Installation and Commissioning of DCS Distribution control system
• Installation and Commissioning of ESD Emergency Shut Down
• Installation and Commissioning of F&G Fire & Gas
• Installation and Commissioning of HV, MV, LV installations Diploma:
2005: High Technician of Industrial Maintenance / High School of Industrial Maintenance EL WARDIA-TUNIS TUNISIA
1999: Technology bachelor / Technical School of Ibn Abi Dhiaf TUNISIA From 2017 to 2022: Electrical Manager at PSI Tunisia Main Tasks and responsibilities:
- Projects Management (Project Schedule, Project Progress and Forecast, Milestones, Procurement Schedule, Project Cost Control)
- Prepare and approve Scope of Work (SOW) during Construction and Commissioning Phases.
- Approves designs and verifies that facilities are built to the relevant specifications and Standards.
- Contract Management and control disputes (claims, payments and contract closeout)
- Management of resources and time in accordance to project difficulties
- Management of project interfaces (Overlap activities, SIMOS work)
- Conduct weekly meeting with all concerned departments to discuss projects difficulties And putting action and/or recovery plan if necessary
- Ensure the successfully achievement of project installation in accordance to the project Schedule and requirement
Projects:
- CONSTRUCTION AND START UP OF E&I PACKAGE OF NAWARA SOUTH TUNISIA DEVELOPMENT CENTRAL PROCESS FACILITY (CPF), FLOWLINES AND WELLPADS FOR OMV
- TEMPORARY MOBILISATION & CONSTRUCTION CAMP AND OFFICES FACILITIES
- CONSTRUCTION AND START UP OF E&I PACKAGE OF NAWARA SOUTH TUNISIA DEVELOPMENT PIPE LINE (PPL) FOR OMV
- CONSTRUCTION AND START UP OF E&I PACKAGE OF POWER PLANT 400 MW PROJECT RADES-C FOR STEG TUNISIA
- DESIGN AND FABRICATION OF 24 UNITS OF CHIMICAL INJECTION SKIDS FOR SONATRACH ALGERIA
- GAS COMPRESSORS REVAMPING AND CONTROL SYSTEM INSTALLATION LIBYA WORK EXPERIENCE
Education
Page 3/5
- INSTALLATION OF CARTRIDGE FILTER SYSTEM FOR MELLITHA OIL AND GAS LIBYA
- CONSTRUCTION OF 15 KM PIPE LINE 12” FOR MELLITHA OIL AND GAS LIBYA
- DESIGN AND FABRICATION OF 52 WELL HEAD CONTROL PANEL FOR SONATRACH ALGERIA
- CONSTRUCTION AND INSTALLATION OF 80 KM PIPE LINE36” FOR HARROUJ LIBYA
- MANAGEMENT OF MAINTENANCE CONTRACT OF NAWARA SOUTH TUNISIA DEVELOPMENT CENTRAL PROCESS FACILITY (CPF), FLOWLINES AND WELLPADS FOR OMV TUNISIA
- MANAGEMENT OF MAINTENANCE CONTRACT OF ENI GAS STATION WED ZAR SOUTH TUNISIA FOR ENI TUNISIA
From 2016 to 2017: Electrical & Instrument superintendent with ERET for OMV Main Tasks and responsibilities:
- Lead/Supervise operational efforts during construction phases
- Plan/schedule execution work in accordance with project interfaces and difficulties
- Preparation of installation procedures according to project specifications
- Follow the installation during the project execution phases
- Manage coordination meetings with different disciplines
- Prepare/approve work schedules and allocation of resources
- Management of electrical and instrument punch list clearance
- Follow-up the mechanical completion of electrical and I&C in accordance to the project Schedule
Project: NAWARA Gas Treatment Plant GABES Tunisia for OMV. From 2013 to 2016: Electrical Construction and Commissioning Manager at SNC – LAVALIN Main Tasks and responsibilities:
- Preparation of commissioning procedures and test & inspection reports
- Review and approval of project schedule / follow-up of commissioning planning
- Follow-up of the vendors planning and regular updating
- Coordinate and manage meetings with the construction team during all project phases
- Manage the coordination meetings with all project disciplines
- Preparation of work schedules and allocation of resources
- Authorized to sign LOTO PTW to ensure the safety of Employees and equipment’s
- Organize, monitor and assist vendors' activities during the SAT
- Testing and commissioning of the HV substation (Testing the control part of switch, circuit breakers and interlock system)
- Parameter setting of protection relays according to the project study
- Testing and starting of HV/HV and HV/MV power transformers
(Main Transformer and Auxiliary-Transformer)
- Testing and commissioning of UPS system (battery charging test, Discharge, Release test)
- Testing and commissioning of MCCs and low voltage boards (power and control)
- Testing and commissioning of medium voltage cells (primary injection on TPs and CTs, secondary injection on protection relays, verification and test of interlock system)
- As-built of project electrical drawings (Red Mark-up) Project: Power Plant combined cycle 400MW Sousse for STEG Tunisia. From 2013 to 2013: Electrical & Instrument Trainer of Operation & Maintenance team of Power Plant 1227 MW Hadjret Ennous Algeria at SNC – LAVALIN
Main Tasks and responsibilities:
- Training of electrical & instrument team on different systems such as:
* Seawater pumping station (Preventive maintenance of main and auxiliary ROTORK Valves)
* CEMS smoke analysis system of stack (preventive maintenance of analyzers)
* Gas station (preventive maintenance of valves, checking and adjustment of ramps)
* Auxiliary boiler (checking the ignition of the burner, checking the flame monitoring System, checking the limit parameters of the boiler)
- Attend and manage the coordination meetings with Operating and Maintenance team Page 4/5
From 2012 to 2013: I&C, F&G and Electrical Manager at SNC – LAVALIN Main Tasks and responsibilities:
- Preparation of commissioning procedures and inspection reports
- Participate in the project schedule / follow-up of commissioning planning
- Manage coordination meetings with different disciplines
- Preparation of work schedules and allocation of resources
- Organize, monitor and assist vendors' activities during the SAT
- Starting of MAN TURBO compressors for gas injection
- Testing and commissioning of the Honeywell F&G system
- Testing and commissioning of Anti-Surge system of Compression Gas Station
- Adjustment and setting of protection relays according to the project design
- Testing and commissioning of MCCs and low voltage boards (power, control and circuit Breakers)
- Testing and commissioning of medium voltage cells (primary injection on TP and CTs, secondary injection on protection relays, verification/testing of interlock system)
- As-built of project electrical and I&C drawings (Red Mark-up) Project: Duplication Gas Compression flash (LP-MP) for “SONATRACH /AGIP” Oil Treatment Center Bir Rabâa Nord ROD Algeria.
From 2011 to 2011: Electrical and I&C Construction and Commissioning Manager at SNC –LAVALIN Main Tasks and responsibilities:
- Testing and commissioning of MCCs and low voltage boards (power, control and circuit breakers)
- Testing and commissioning of medium voltage cells (primary injection on TP and CTs, secondary injection on protection relays, verification of interlock system)
- Testing and commissioning of DCS and ESD systems Invensys Foxboro (Cold loop, Hot loop, signals simulations, Instrument process commissioning, functional test of the ESD system)
Project: Rehabilitation of GPL factory Rhoud-Ennouss Algeria for “SONATRACH”. From 2010 to 2011: Electrical assembly and testing responsible at ALSTOM Transport Main Tasks and responsibilities:
- Installation, testing and commissioning of electrical substations
- Installation, testing and commissioning of Catenary communication system
- Installation, testing and commissioning of Catenary switch and circuit breakers
- Installation, testing and commissioning of Catenary control system (control room)
- Installation, testing and commissioning of Catenary signaling system
- Functional test of suburbs catenary protection system
- Start-up of electric catenary suburbs train tracks Project: Electrification “25KV” of southern suburbs trains of Tunis for SNCFT Tunisia. From 2009 to 2010: Electrical and I&C site engineer at ALSTOM POWER Main Tasks and responsibilities:
- Installation and testing of F&G detection system (F&G Control unit, Detectors, visual and sound signaling system and activation of manual buttons)
- Installation and testing of F&G protection system (Fire Water pumping station, Deluge system, RIA System, CO2 Rack, Sprinklers and Spear Cannons)
- Modification of execution plans if necessary (Red Mark)
- Functional test of F&G system with discharge (F&G cause & effect matrix) Project: Power Plant Combine cycle single shaft 400MW Gabes for STEG Tunisia. From 2008 to 2009: Commissioning site engineer Electrical and I&C at SNC – LAVALIN Main Tasks and responsibilities:
Page 5/5
- Testing and commissioning of the following systems: Sea water pump station Desalination station, Auxiliary Boiler, Electro-chlorination Station, GIS System
- Testing and commissioning of MCCs and low voltage boards (power, control and circuit-breakers)
- Testing and commissioning of medium voltage cells (primary injection on TPs and CTs, secondary injection on protection relays, verification of the inter-lock system)
- Testing and commissioning of DCS and ESD systems (cold and hot loop check, Signals simulations, process commissioning, operation test and start-up of DCS, ESD and F&G)
Project: Power Plant Combine cycle 1227 MW Hajret Nouss for SONELGAZ Algeria. From 2007 to 2008: Electrical, I&C and F&G commissioning coordinator at BENTINI Main Tasks and responsibilities:
- Testing and Commissioning of the 60Kv-6.6Kv Electrical transformer Substation
- Testing and commissioning of MCCs and low voltage boards (power, control and circuit-breakers)
- Testing and commissioning of medium voltage cells (primary injection on TPs and CTs, secondary injection on protection relays, verification of the Locking)
- Testing and commissioning of DCS and ESD systems (cold and hot loop check, Signals simulations, process commissioning, operation test and start-up of DCS, ESD and F&G)
- Testing and commissioning of F&G system (detection, Visual and sound signaling, CO2 rack vacuum testing, Protection system such as water pumping station, deluge valve, RIA and lance cannon)
Project: SP2-SP3 Two Fuel Pumping stations M’SILA and BISKRA for SONATRACH Algeria.
From 2007 to 2007: Electrical supervisor at Snamprogetti Main Tasks and responsibilities:
- Receipt and verification of electrical and instrumentation equipment delivered on site
- Monitoring of the electrical and instrument installation work of Turbo-compressors as : Cable tray installation, Cable pulling, low Voltage Cabinet assembly and medium voltage cells, lighting, earthing network, Assembly of process instruments, Instruments and junction boxes connection
- Follow-up and ensure the good installation and execution work of Electrical and Instrument in order to meets the project requirements and standards. Project: Increasing and revamping of gas plant compression GAZODUC for SCOGAT
« Gas TRANS-TUNISIAN transportation system » Tunisia. From 2005 to 2006: Industrial Maintenance responsible at VOLVO GROUP
- Prepare the annual and monthly Planning of preventive and curative interventions
- Prepare corrective and troubleshooting Action Plan MS office pack, Power BI, Primavera P6, MS project, ERP… Informatics Skills
Contact this candidate