- * -

PERSONAL DETAILS

NAME KALACHAND SIKDAR

QATARI ID: 265******** Mobile +974********

NATIONALITY:

ADDRESS IN QATAR :

E.MAIL ID:

Indian

AlSulaiti Tower, Building 4, Flat-15, Zone 26, Street 945, Najma, Doha,Qatar.

aduqpu@r.postjobfree.com

MARITAL STATUS: Married, with 2 Children

EDUCATION/QUALIFICATIONS: A] Calcutta University, India Bachelor of Science (B.Sc) in the year 1987

B1] Jadavpur University, Kolkata, India

Bachelor of Electrical Engineering (First class Hons) in the year 1992.

B2] Received CANADIAN Equivalent 04 years Degree

Certification from World Education Service, CANADA. C] Master Certificate in Project Management from George Washington University, USA (2007- 2010).

SAEP CERTIFICATION FROM:

KAHRAMAA

AEP CERTIFICATION FROM

MEW-KUWAIT

COMPEX CERTIFICATION:

CURRENT ACHIEVEMENT:

1] Received SAEP Certification from Kahramaa ET

department (Electricity Transmission) in the year 2008 which is still valid.

2] Received one more SAEP Certificate from Kahramaa CS department (Control System) in the year 2021.

3] I, only Engineer from Kahramaa, have received double SAEP Certificates from KAHRAMAA.

Received AEP certification from MEW-Kuwait in the year 2005.

In progress

Received ‘DISTINGUISED EMPLOYEES AWARDS’ from

KAHRAMAA HR, the most prestigious awards of KM, in the year Nov’2022.

- 2 -

Summary of Expertise :

30+ years of working experience in the field of Electrical Power system, Commissioning of several HV & EHV S/STNS & Power Plants, maintenance, troubleshooting, fault finding, and retrofitting of Electrical Protection systems and their associated field. Presently working with KAHRAMAA for the last 15 years and prior to that worked with ABB India and ABB Kuwait for the remaining 15 years. Major knowledge and expertise gained in the field of commissioning of HV-EHV Substations and power system Protection and Automation systems. After spending nearly 25 years in the field of Commissioning, Servicing, maintenance and fault finding in the Power system field, I have worked almost 03 years in Marketing, Engineering & Project Management field and, the remaining 02 years in the KAHRAMAA National Control Centre as System Control Engineer for operation and maintenance of Qatar’s National grid, GCCIA grid, Issue of all types of Work Permits, Generation and Load Flow control, Grid voltage and frequency control of Qatar National Grid.

Major Experience gained in the field of :

Operation, Control and maintenance of National EHV Grid in Qatar

Testing & commissioning of Switchyard up to 400 KV (in all respect).

Worked as Project Manager for the Project value up to 200,000 KD.

Engineering, Field training and retrofitting of Power Protection systems.

Erection, testing & commissioning, maintenance, trouble shooting of Protection Systems and HV/EHV s/stn equipments.

Operation & maintenance of LV, MV & EHV System.

Interviewed several engineers of contractors, Consultants, PP and Bulk Consumer Engineers in Qatar for their AEP Authorization test and authorized them based on their performance as shown on KM Protection Systems and safety knowledge.

Product, Spares and System Marketing.

Retrofit service Cum Marketing business.

Remarkable Achievements in Qatar and Kuwait Oil Sectors:- A] QATAR PETROLEUM – QP HALUL ISLAND

The World's 2nd largest (110KM) Sub-Sea underground 132KV Cable network was commissioned by me in the year 2018-19 for supplying power from Kahramaa QP-Halul s/stn to QP Halul Island. I was fully associated with Engineering upto final commission of this unique s/stn. The great challenge was to control over Voltages developed in the line due to the high MVAR generated by the cable. To resolve all, it was decided to install 220KV 1- POLE break GIS along with the installation of PSD devices (PHASE SYNCHRONING DEVICE) for controlling the 132KV line between the 02 s/stns. In addition, 02 nos 60MVAR Line reactors were provided at both ends of the line to consume high MVAR generated by the cable. Finally, Power Factor Correction equipment was required at both ends for a smooth supply of Power to QP-HALUL Island.

- 3 -

B] KUWAIT NATIONAL PETROLEUM COMPANY (KNPC-KUWAIT) On joining to ABB Kuwait, I received a unique project to design, get approval from KNPC, develop Proto-type and on satisfactory simulation tests of the same, commission an Auto and Manual Change over Scheme on a live 11KV Incomer s/stns from which power was feeding to its process. Any maloperation during the commissioning of a newly developed system on a live Incomer Feeder could cause a huge loss in the production of oil. During design and Engineering, I used Numerical relay type CAP 505 and developed logic in it based on Customer requirements. The great challenges were to work in live incomer feeders and implement a new system in it which was not existed before. It took nearly 06 months to complete the entire task. Subsequently, ABB-Kuwait received similar orders for all of their Incomer feeder s/stns.

MAJOR CLIENTS/CONTRACTORS/CONSULTANTS HANDLED :

CLINETS FROM OIL SECTOR

1] QATAR ENERGY

2] RAS GAS, QATAR

3] KUWAIT OIL COMPANY, KUWAIT

4] KNPC, KUWAIT

5] HALDIA PETROCHEMICALS LTS, INDIA

6] INDIAN OIL CORPORATION LTD, INDIA

CLINETS FROM POWER SECTOR

1] KAHRAMAA, QATAR

2] QASCO, QATAR

3] QAFCO, QATAR

4] MINISTRY OF ELECTRICITY & WATER, KUWAIT

5] POWERGRID CORPORATION OF BANGLADESH

6]NATIONAL THERMAL POWER CORPORATION, INDIA

7] POWERFRID CORPORATION OF INDIA LTD

8] CALCUTTA ELECTRIC SUPPLY CORPORATION, INDIA

9] WEST BENGAL STATE ELECTRICITY BOARD, INDIA

10] WEST BENGAL POWER DEVELOPMENT CORPORATION LTD, INDIA. 11] ORISSA STATE ELECTRICITY BOARD, INDIA

12] ORISSA POWER GENERATING CORPORATION, INDIA

13] MEGHALAYA STATE ELECTRICITY BOARD, INDIA

14] BHARAT HEAVY ELECTRICALS LIMITED, INDIA

15] NORTH EASTERN ELECTRIC POWER CORPORATION LIMITED, INDIA MAJOR CONTRACTORS/CONSULTANTS HANDLED:

1] M/S SIEMENS LTD, (INDIA, KUWAIT, QATAR)

2] M/S ABB LTD, QATAR

3] ALSTHOM INDIA, & QATAR

4] AREVA QATAR

5] GENERAL ELECTRIC (INDIA, QATAR)

6] M/S LARSEN & TOUBRO LTD

7] M/S ENERGO PROJECTS-QATAR,

8] M/S FICHTNER CONSULTING-QATAR,

9] M/S LAHMEYER INTERNATIONAL-QATAR,

10] M/S ELECTRO DE FRANCE-EDF,

11] M/S WORLEY PARSONS - QATAR.

- 4 -

SAEP Certified EHV Systems Control Engineer – KAHRAMAA, Qatar ( 2020 TO TILL NOW)

Transferred from KAHRAMAA Electricity Transmission department to KM-System Control department (NCC,National Control Centre) in July’2020. Key responsibilities holding in CS departments are:-

Switching, operation, maintaining, controlling, releasing, restoration of Qatar’s entire Electrical Networks ( 400 KV to 11 KV).

Issue all types of work permits and other safety documents from NCC to accomplish work in KAHRAMAA network and Bulk-Consumer network.

Maintenance and trouble shooting of entire KM EHV network is one of the prime responsibilities of Control System Engineer.

Co-ordinate with all QEWC and PP power plants and control the load flow of KM-EHV Systems.

Working as a System Control switching engineer for commissioning of all new EHV S/STNS and Power Plants.

Short circuit analysis, Load flow analysis, Safety precaution review for commissioning of new EHV Equipment, quick restoration of KM-EHV networks during abnormal situation are the common responsibilities of CS Engineers.

Co-ordinate with GCCIA and NWCC and ensure safe operation of GCCIA grid and WATER Production in Qatar.

Maintain Voltage and Frequency of KAHRAMAA grid as per Grid Code laid down by Kahramaa.

Review KM developed SOM and Safety books and upgrade in timely manner.

I have been assigned for Bulk Consumer Orientation training and successfully given several training to Bulk Consumer new Engineers to assist them for appearing Authorization test in Kahramaa. Training to in-house Qatari Engineer is our common responsibility. SAEP Certified HV/EHV Transmission Protection Engineer – KAHRAMAA, QA( 2007 TO 2020)

Started my career with KAHRAMAA Transmission Protection department from Nov’2007 and continued till June’20. Key responsibilities holding in Electricity transmission department are :-

Cleared Senior Authorization theoretical and practical test from KAHRAMAA Transmission Department in the year 2008 and received SAEP Certificate in the year 2008 and thus, authorized for switching, operation, release, restoration of entire KM Networks from 11KV up to 400KV.

Involved in Annual Maintenance work (ETP) for 1 year.

Worked as a KCT Commissioning Engineer from 2009 to 2020. Commissioned almost 80 nos HV/EHV S/stns duly constructed by EPCs from Phase VII to Phase XIII.

Provided Kahramaa representation at site in monitoring and co-ordinating the site activities of EPC Contractors and sub-contractors for all electrical installations with specific focus on Transmission protection schemes, HV equipment tests, Primary injection tests, Stability tests OCC, SCC tests of Generators, Staggering tests etc.

Handled 08 nos EPC Contractors during commissioning phases and was involved most of the technical meetings, suggested several modification works to improve KM Protection systems.

Main EPCs handled are SIEMENS, ABB, ALSTHOM, GE, HYOSUNG, NCC, HITACHI and L&T etc.

Handled several Consultants OF Kahramaa like ENERGO PROJECTS, FICHTNER CONSULTING, LAHMEYER INTERNATIONAL, ELECTRO DE FRANCE-EDF, WorleyParsons ETC.

Witnessed major functional tests of Electrical protection systems, HV equipment tests, ensured successful implementation of approved Schematics at site and carried on detailed trip tests of all protective equipments of a HV/EHV S/stns.

Reviewed and monitored of acceptance tests during Cold and Hot commissioning of all types of Electrical equipment.

- 5 -

Strictly followed Time Management to ensure outage, restoration and commissioning activities are completed as per planning.

Issued several safety documents at different phases of works to ensure work is completed with safety and in time for Kahramaa existing network and pre and post commissioned s/stn.

Attended several alarms and tripping calls on HV/EHV networks, involve in fault finding and restoration of Circuits.

Training to Qatari Engineers and getting them prepared for Authorization tests were my key responsibility.

Taken several interviews for Contractors Engineers and sub-contractors Engineers and approved them based on their credentials.

Worked with PDSA (Protection design and System analysis group) in KM and involved in design and upgradation of power system protection network.

Attended several Tender Technical review meeting, Tender evaluation meeting from phases VII to Phase XIII.

Project Manager in ABB Kuwait ( 2006 TO 2007):

Being a Head of the Service department, I had given an additional charge to work as a Project Manager for a Project valued up to 200000 KD. At the time of discharge of duties from ABB Kuwait, I was working as a PM for 07 projects along with taking care as a Group Leader of the Service department (Electrical Power system).

Service Manager (Power system) - ABB Kuwait ( 2005 – 2007): Worked with ABB-Kuwait for approximately 03 years as a Head of Service department for the Electrical s/stns and the key responsibilities performed in ABB Kuwait are given below:

Appeared for Authorization tests in MEW-Kuwait in the year 2005 and received Authorization Certificates from MEW-Kuwait to work in their live s/stns from 11 KV to 400 KV level.

To participate in AMC Contract with Ministry of Electricity & Water-Kuwait and execute the job as per term and conditions laid down by MEW-Kuwait. Each contract duration was for 03 years and work responsibilities mainly consisted of full maintenance of MEW-EHV S/STSNS.

To Participate in the Tendering process in KNPC (Kuwait National Petroleum Company) and KOC ( Kuwait oil company) for the Sub-Station related projects and Execute the job as per terms and conditions governed by the Oil Companies.

To impart training to Client Engineers, Consultant and other Sub-Contractor Engineers on the product supplied by ABB.

To involve directly in the Cold and Hot Commissioning processes for commissioning of Electrical HV & EHV S/STNS and Power Plant.

To attend meetings with Clients and other sub-contractors on weekly basis and reviewed the progress of the project.

To involve in Engineering for retrofitting job. Successfully retrofitted complete Generator protection systems and Line protection systems with ABB REG 316 and REL 521 at ALZour Power Station in Kuwait. 11kv grade live switchgear Units were retrofitted in KNPC-Kuwait.

Participated Tendering to execution process for supply, Engineering, implementation, development of proto-type and execute Automatic and Manual change over scheme in KNPC-Kuwait and successfully executed the work as per terms and conditions laid down by the client.

Commissioning Manager (Head) - ABB India ( 1993 – 2005): Career growth in ABB India :-

Joined ABB India as a Trainee Protection Engineer in the year 1993

Confirmed as a Power System Protection Engineer in the year 1994

Promoted to Senior Power system Protection Engineer in the year 1996

Promoted to Assistant Manager (P & SA) in the year 1999.

Promoted to Manager- Protection and Sub-station Automation in the year 2002.

Transferred to North India as a Head of Commissioning Managers in the year 2004.

Resigned ABB India and moved to ABB Kuwait to get Gulf working experience.

- 6 -

Key Skills & Added Values to contribute to a new organisation: Over 30 years of Commissioning, Project Management and Field experiences in the field of Electrical Power Protection Systems (Relays) & Substation Automation Systems (SCS), Electrical Power System of EHV, HV Indoor (GIS) & Outdoor Substations & Distribution Automation System.

Successfully passed out Senior Authorization test from KAHRAMAA(Qatar) ET department in the year 2008for switching and operation of all KAHRAMAA HV/EHV S/STN Equipment up to 400 KV. Successfully Passed out Senior Authorization test from System Control department for Operation and Control of Qatar’s National Grid from NCC-Qatar in the year 2020 and responsible for Control and operation of Qatar’s EHV system from 33kv to 400 KV as well as controlling of total Generation of Qatar as well as GCCIA Grid.

Successfully passed out Authorization test from MEW-Kuwait in the year 2005 and obtained total authorization to carry on work in MEW-Kuwait Network up to 400kv level. Almost 80 s/stns (33 KV to 400 KV) have been commissioned by me over last 26 years in KAHRAMAA, India, Bangladesh and Kuwait and thus, interacted deeply with several Multinational Contractors, Consultants, all project managers, Design engineers, National control centre, Operation and maintenance team, Technical affair project team and State Electricity Boards of various Countries and States.

First ever ‘One and half Breaker’ scheme was introduced in Kahramaa 400kv s/stn(Qatar) in the year 2013 where I was deeply involved in preparation of technical specification, technical workshop, design review meeting, pre-commissioning testing, commissioning and commissioned the system successfully. SOM (System operation Memorandum) for this new one and half Bkr scheme was prepared and uploaded to our SOM book.

Commissioned successfully first ever 400KV Gulf Grid (GCCIA) PROJECT in the year 2014 where Qatar and Saudi Arabia is connected with 400kv Double circuit lines passing through 400kv LZS-KM S/stn. It was a great challenge to match Qatar standard with Saudi Arabia and GCCIA standard however we could come of a solution and implemented successfully. World 2nd longest (110 km) 132kv double circuit cable network between QP-Halul-Qatar (On shore) and Halul Island (off shore) was successfully commissioned by me. It was one of the toughest challenges I have ever met and successfully executed. There are several additional design requirements came up during Pre-commissioning tests which were not common in similar voltage level however, resolved all issues successfully. 220kv QSTEC (Qatar Solar Technology in Ras Laffan) s/stn was commissioned by me. Interviewed several engineers of contractors and Consultants in Qatar for their Field Authorization test and ensured engineers are well competent on Kahramaa safety norms and system knowledge.

CAREER HISTORY

April’2020 onwards Qatar General Electricity and Water Corporation, Doha, Qatar

Position: System Engineer at National Control Centre, Qatar

Area: NCC

Location: Doha, Qatar.

- 7 -

Responsibilities:

Transferred from Transmission Protection unit to System Control department as a Control engineer. Responsible for controlling and operation of EHV network and total Generation of Qatar and GCCIA grid.

Successfully passed Senior authorization test at NCC department in Sept’2020.

Received Distinguished Employee Awards from Kahramaa Senior Management in the year 2022. Achievement: I am the only Engineer in Kahramaa who has received Senior Authorization Certificate from KM Electricity Transmission department as well as System Control department. Nov’2007 to March’2020 Qatar General Electricity and Water Corporation, Doha, Qatar

Position: Senior Power system Protection Engineer

Area: Transmission

Location: Doha, Qatar.

Responsibilities:

Joined in Kahramaa as a Protection specialist and have been authorized as a "Senior Authorised person" to carry out switching in Kahramma network upto 400kv level as per safety rules governed by Kahramaa.

Authorized to attend several Tender review meeting in Kahramaa.

Responsible for Commissioning and maintenance of KAHRAMAA Protection systems. Handling prime contractor like, ABB, SIEMENS, AREVA and ensuring quality execution of all commissioning activity.

Responsible for HV equipment switching upto 400kv and issuance of Work permits to Contractor or other competent persons to complete their tasks.

Responsible for Testing, Commissioning, trouble shooting, fault finding on Electrical Power systems.

April’2005 – Nov’2007 ABB Engineering & Technolgy Co. Position: Service Manager( Head) (2005 – 2007)

Area: Service Department

Location: Safat, Kuwait

Holding duel responsibility in the Organization i.e Worked as Service Manager as well as Project Manager for Project value upto 200000 KD and was reporting to Operational Manager of ABB with direct staff accountability of 12 Engineers and Sub-Contractor staff up to 30. Responsibilities:

Approved by Ministry of Electricity & Works, Kuwait to work independently in all their main Substations up to 300 kV level.

Responsible for design & implementation of new system as per Customer requirement.

- 8 -

Designing, engineering, programming & commissioning 04 Nos Automatic & Manual Change Over System in KNPC-Shuaiba Refinery using ABB Numerical Relays.

Involved in the following projects: KNPC, KOC, Doha East Power Station, Al-Zour Power Station, MEW & Mina Abdullah Refinery.

Leading a Team of Technicians & Engineers.

Fully responsible in Testing & Commissioning and handover of all Projects which are coming under the scope of ABB-Kuwait.

Total responsibility as a Project Manager role upto the value of KD 200,000.00 only.

Customer Training is one of the key roles for my department for which I was fully responsible.

Strict adherence of Time Management and Planning for Commissioning schedule for Timely execution of projects.

After sales service, trouble shooting, fault finding was a regular part of my responsibility.

Total co-ordination with Sales, Project Manager, Engineering team and Service to achieve timely delivery and Project completion in time.

2004 – 2005

Position:

ABB Limited, INDIA

Commissioning Manager- Head

Area: EHV Projects

Location: Faridabad, India

Responsibilities:

Commissioning Manager (Group Head), responsible for the commissioning of EHV Projects

(Substations up to 400 kV) for North India.

Interfaced with Subcontractors during execution of projects, assessed the quality of Commissioning Engineers & ensured a quality job done on-site in order to meet the Customer requirements.

Hold responsibility for the Time Management & plan for commissioning schedule for timely execution of projects.

To attend Engineering meeting, pre and post tendering meeting activities

Provided in-house training for personnel as well as Customer.

Supported Project Management & Engineering Group.

Established a Commissioning Protocol, which is accepted by ABB-Globe. 1993 – 2004

Position:

ABB Limited, INDIA

Engineer to Manager ( Prot & SA)

Area: Protection & Substation Automation

Location: Kolkata, India

Responsibilities:

Started Career as Trainee Engineer and after successful completion of training, appointed as Service engineer in the year 2003 and gradually promoted to Service Manager.

Involved in the erection & commissioning of Electrical Protection Systems for Generator (up to 500 MW), Line (up to 400 kV), Transformer (up to 315 MVA), Busbar (400 kV), Reactor & Motor.

Performed annual maintenance of Protection Systems of Generator, Line, Transformer, Busbar & Motor.

Handled remote communication for Electrical Protection Systems.

- 9 -

Conducted training, seminar on Generator Protection Systems, Numerical Relays, Numerical Busbar Protection Systems & SPACOM range of Distribution Relays.

Deeply involved in Retrofit services for Protection Systems, parameterisation of Numerical Relays

& handling its software.

Conducted system study supported by DR print out.

Involved in the Relay co-ordination & grading.

Worked as Sales Engineer for Marketing of Services & Retrofit.

Worked as Marketing Engineer & deeply involved in pre / post tendering activities.

Successfully commissioned Numerical based Generator, Line, Transformer & Busbar Protection Systems abroad.

Commissioned Disturbance Recorders & Event Loggers in several 400 / 220 kV Substations.

Actively participating in the Engineering activity of (P & SA ) system. Overall Engineering experiences:

Using Auto-CAD and different configuration Tools like CAP540, CAP 531, CAP505,CAP501,Digsi, Micom S1, REBWIN, REBCON, SMS010,SMS510 I have designed Protection schemes upto 400KV O/H Line, 132kv O/H Line, 11kv different bays, Automatic Bus Transfer scheme, several retrofitting scheme for Line, Transformer, Busbar and Motor etc. Technical Engineering expertise related to Substation Automation, GIS & Protection Relays:

Fully conversant of all ABB Protection relays starting from Electro-mechanical, static, Micro- processor and latest Numerical series. In depth knowledge of Configuration and programming of all ABB relays which are manufactured in Sweden, Switzerland, Finland and Italy. Attended several training sessions on protection and automation systems both in India and abroad and delivered several lectures on Power protection system at site and customer premises.

Well conversant on Siemens Siprotec series and AREVA make MICOM Series relays. Examples of Design Projects:

Total Engineering along with project execution for an Automatic Change over Scheme and Manual Change over scheme using ABB make Numerical Relays in a Refinery plant, Kuwait.

Total Engineering and execution of protection system for a 400 kv O/H Line in West Bengal using ABB make static relays.

Retrofit Engineering and Execution of 132kv O/H line protection systems.

Retrofit Engineering and Execution of 132kv Busbar Protection systems using ABB make Numerical Relays.

Complete Engineering and Execution of 11kv Motor feeder bay, Transformer feeder bay, Incomer bay, Bus-coupler Bay in Refineries, Kuwait.

Fully conversant on configuration of all types of ABB,Siemens,Areva make Numerical Protection Relays.

Experience of On-Site training, Customer Interaction, Fault finding, Testing, Commissioning & on-lineTraining:

On site Training:- Customer training on ABB systems and Products are one of my prime responsibility. Several Training classes have been conducted by self at different sites in India, Bangladesh Nepal,Kuwait and Qatar.

In House Training: Being a service head of ABB Kuwait, I was responsible for upgradation of the knowledge of our in-house Engineers and accordingly, several training sessions on Power Protection systems were conducted in ABB Kuwait during my stay.

Switching, Testing & Commissioning of sub-station equipment upto a level of 400 KV :- I am associated with this field for more than 30 years and executed several projects in INDIA, BANGLADESH,KUWAIT,NEPAL,BHUTAN and QATAR.

- 10 -

Fault finding: Responsible for trouble shooting, corrective action and evaluation of all types System alarms and Power system faults up to 400KV level,

Interviewed and authorization test to all contractors and consultant engineers were handled by me in Kahramaa.

TRAINING: A] Inter Personal Skill Development/ABB F’dabad,India/1999 B] CT,PT,CVT,BKR(EHV,MV) / ABB Baroda / 2003

C] Risk Management /ESI-USA/ 2006

D] Project Leadership, Management and Communications / ESI-USA / 2007.

E] Project Cost and Scheduling/ESI-USA/2007

F] ISO9001, TQM, Code of Conduct / ABB India,Kuwait/2006 G] Health and Safety /ABB Kuwait/2005

H Marketing for SA & Protection system /ABB

Bangalore/2000

J] 132GIS Sub-Stn Operation and Maintenance/MEW-

Kuwait/2005

K] REB500 SYS Busbar Protection/ABB Switzerland/2003 L] ABB make All types of Protection Relays (Static to Numerical) /1994 to 2004 in batches/ABB Bangalore,Baroda M] Indactic 65c DR, Hathaway ER /ABB Bangalore/1995. N] NSD 570 Intertrip Equipment /ABB Kuwait/2006

O] ABB Make SCS & SMS /ABB Bangalore/2003

P] Engineering for SA & Protection system

/ABB/Siemens/2001

Q] AREVA make PACIS SCS system.

R] SIEMENS make SICAM PAS SCS system.

S] Entire range of Siemens make SIPROTEC Relays.

T] Entire range of Alstom make MICOM series.

SOFTWARE: A] Fortran, Microsoft Project

B] PCM600, DIGSI, STUDIO S1, CAP 501, CAP 505, CAP 540, TAPCON 260, REBWIN, MICOM SI STUDIO, MICOM

Agile etc

LANGUAGES: Bengali Native

English Fluent

Hindi Fluent

REMUNERATION EXPECTED: Negotiable

PERMANENT RESIDENCE: 2/4, H.B.TOWN (EAST), ROAD NO.-7, P.O.: SODEPUR KOLKATA – 700110, WEST BENGAL, INDIA.

NOTICE PERIOD: 1 Month

INTERVIEW AVAILABILITY: Available in Qatar.

Contact this candidate