Page *

Sr. Project Engineer Automation and Control

JENSON T VARGHESE Mob: +971*********(UAE)

+917*********(INDIA)

Nationality: Indian aduoo9@r.postjobfree.com

aduoo9@r.postjobfree.com

CARRIER OBJECTIVES

To be part of a Management team, which shall take ownership of the clients Quality function ensuring that all of the necessary quality standards are achieved and sustained and driving performance improvement in order to ensure that the business maintains a competitive edge.

SUMMARY OF EXPERIENCE:

Over 16 years of experience in Oil& Gas, Industrial Automation, Infrastructure and Facilities Management. Experience includes Project management, Project Estimation, Quality Management, Quality inspections, Installation Inspection, Startup inspection, Pre-Commissioning and Commissioning in Automation, Instrumentation and Control Systems. COMPANY DESIGNATION DURATION PROJECT’s

Icontrol Automation

Technologies

Automation Project

Engineer

Jul-2020 – Till Date

Various Industrial Automation Projects with;

Siemens TIA Portal and WinCC Flexible,

Delta ISPSoft & DOPSoft, Delta ASDA

Soft for Servo Drives, Schneider ZelioSoft

etc.

SCADA system development using WinCC

Runtime.

Siemens S7-1200, Logo PLC, Delta DVP

SS2, Schneider Zelio PLC’s.

Siemens SIMATIC HMI, Delta HMI DOP-

100 Series.

Siemens Sinamics V20, G120 series VFD,

Delta MS300 drives.

Siemens Sirius Soft starters.

Shinryo Corporation Electrical QA/QC

Engineer

Nov 2019 – Jul 2020

Kifaf Project, Al Wasl Developments Kifaf,

Dubai.

Sigma-Electromechanical

Company

MEP Maintenance

Engineer

Nov 2017-Nov 2019

Electromechanical Projects & Maintenance

for Highrise Residential Buildings, Premium

villas and Private Palaces

Target Engineering Const.

Company, Abu Dhabi, UAE

Lead QA/QC Engineer

E&I

May-2012 to Oct-

2017

SAUDI ARAMCO - Replace 4.16kv Motor

Control Gear in Uthmaniyah & Shedgum

Gas Plants.

SAUDI ARAMCO - Upgrade Power

Distribution System at Tanajib Plants

SAUDI ARAMCO - Replace Sales Gas

Compressor Motors at Uthmaniyah &

Shedgum Gas Plants

Advanced Military Maintenance and

Overhaul Centre (AMMROC)

ADGAS – Paraffin Naphtha Tanks

Replacement Project, Das Island, Abu

Dhabi

GASCO - Nitrogen Gas Injection Project

(Samsung), Habshan

EMAL Smelter Complex - Cast House

General Electrical Installation and

Commissioning Project (SNC Lavalin),

Taweelah

Page 2

TAKREER-Seawater Intake (SWI-3), Ruwais

Galfar Engineering &

Contracting, Abu Dhabi, UAE

QA/QC Engineer E&I Mar 2009 to Apr

2012

TAKREER-EPCC of Sea Water Facilities

Expansion (Phase 2) at Ruwais Refinery

NSH Corporation, Jubail, KSA QC Inspector–

Instrumentation &

Controls

Oct 2006 to Nov

2008

Advanced Polypropylene Company-

Construction & Commissioning

SABIC-Olefins Conversion Unit, IBN ZAHR-

Construction & Commissioning

Larsen & Toubro Plastic

Machineries Limited,

Chennai, India

Testing And

Commissioning

Engineer

Aug 2005 to Sep

2006

L&T DEMAG - Plastic Injection Moulding

Machines

PMP Components, Satara,

Pune

In plant Trainee-

Maintenance

Apr 2005 to Jun

2005

Automatic Magnetization of Sector

Magnets for Wind Shield Washer Pumps.

Retrofitting of Hydraulic Press.

QUALIFICATIONS.

Academic

Qualifications/Certificatio

ns

Diploma In Mechatronics-NTTF Coimbatore, India.(2002-2005) ISO 9001:2008 Quality Management Systems Auditor/Lead Auditor- Certificate no: 9118 Vocational qualifications&

Skills

The ability to communicate well at all levels within the COMPANY and to demonstrate leadership.

Possess very good planning, presentation, negotiations and organizational skills.

Strong knowledge in International codes and standards such as BS, IEC, IEEE, etc

Fluent English (spoken & written).

Electro-mechanical inspection background

Good understanding of “Quality Assurance and Control”

Assist in conducting in Internal Audits.

Able to work under pressure

Intuitive and eye for detail

Flexible

Appreciation of QHSE principles

Project Experience Details

Jul 2020 – Till

Date

Industrial Automation Engineer

Icontrol Automation Technologies

In charge for the Controls and Automation department.

Design and Development of Electrical Circuit, BOM, PLC programming, HMI development, SCADA and documentation.

Procurement and scheduling the work.

Project Philosophy and sequence development as per the customer requirement.

Specialized in control panel design, programming and installation for STP, RO, Vaccum Pumps, Blenders, Mixers, Metal forming machines, Pallet conveyor systems, Drum Filling Machines, PID controlled Pumps, and other special purpose machines etc

Control Panel Design, layout, wiring and Testing.

Hand on Experience in Industrial Automation Projects with;

Siemens TIA Portal and WinCC Flexible, Delta ISPSoft & DOPSoft, Delta ASDA Soft for Servo Drives, Schneider ZelioSoft etc.

SCADA system development using WinCC Runtime.

Siemens S7-1200, Logo PLC, Delta DVP SS2, Schneider Zelio PLC’s

Siemens SIMATIC HMI, Delta HMI DOP-100 Series

Configuration and installation of Siemens Sinamics V20, G120 series VFD, Delta MS300 drives

Configuration and installation of Siemens Sirius Soft starters

Weighing systems using Siemens SIWAREX modules.

Field Instrument & Sensors Installations, Hookup of impulse lines, Calibration, Loop tests, function tests( Rosemond, Yokogawa, E+H, IFM, Sick, Aconics, Omron etc) Page 3

Nov 2019 to

Jul 2020

Electrical QA/QC Engineer

Shinryo Corporation

Understands the Contract drawings and specifications specific to aspect of the work

Receives and attends the Inspection Requests and E&I activities ensuring that works are carried out according to specifications, Inspection and Testing Plan, method statement and approved shop drawings.

Perform and accurately record all inspections, checks and tests in accordance with project processes and specifications

Ensuring all incoming goods are compliant to relating drawings/specifications.

Checking material certificates in accordance with company Quality requirements. Nov 2017 to

Nov 2019

MEP Maintenance Engineer

Sigma-Electromechanical Company

Develop maintenance strategies, procedures and methods.

Prepare maintenance quotations, Initiate spare parts planning and sourcing.

Manage procurement activity of repair and maintenance goods and services via requisitions.

Supervises all routine preventive maintenance to ensure that machines/ devices/ fixtures continue to run smoothly, building systems operate efficiently, and the physical condition of properties does not deteriorate.

Perform facility inspections, report on condition affecting operations, submit summary reports of conditions in buildings, and recommend actions to be taken.

Review/understand/ command equipment and methods of operation, BMS system, fire/life safety, lighting Automation, climate control and other related MEP systems.

Reads and interprets blueprints, make engineering diagrams, sketches and plans necessary to identify and define work assignments, standards, tools, materials, and equipment’s when needed.

Review and evaluate preventive maintenance operations and improvise maintenance operations to save on costs and work time.

May 2012 to

Oct 2017

Lead QA/QC Engineer E&I

Target Engineering Const. Company, Abu Dhabi, UAE

Handling 14 QA/QC Engineers for Electrical and Instrumentation EPC projects. Coordinating with the client inspectors for timely inspection. Preparing NCR and Corrective action requests for any deficiency in the Engineering, Procurement, Construction and pre-commissioning phases of project.

Replying on timely basis NCR and Logbook entry, which is issued by client, coordinating with pre- commissioning department to notify about test and schedule for timely inspection.

Verification by means of a planned Audit schedule for Design, procurement and Construction phases of Project that the requirements set in the Quality Manual is met.

Handling client visits for Pre-qualification audits. Review of awarded new projects and Quality Planning. Implement and maintain Quality management system as per QMS

Mobilize QC Engineers &Inspectors for projects site. Carrying out vendor prequalification and maintaining approved vendor list.

Coordinate with various subcontractors/vendors and arrange for timely inspection and release of items to reach at site. Notify client, class and TPI for witness & hold points as per approved ITP. Responsible for Site Quality Activities of multi discipline Oil & Gas projects.

Liaise with clients, Class & TPI’s during the execution of project. Attending meetings with clients & initiate actions on the meeting outcomes.

Preparation & Submission of ITP’s, QC procedures, as per client specifications, Codes and standards. March 2009

to April 2012

QA/QC Engineer E&I

Galfar Engineering & Contracting, Abu Dhabi, UAE

Projects :

EPCC of Sea Water Facilities Expansion (Phase 2) at Ruwais Refinery DUTIES AND RESPONSIBILITIES

Implements all aspects of the quality management systems and quality assurance/control of site supervision activities provision across the project in accordance with the Project’s Quality Plan (PQP), contract documents, relevant standards and local authorities' requirements Page 4

Ensuring compliance is maintained with respect to ISO standards and the companies QMS objectives.

Audits, reviews and oversees the Contractors implementation of his QMS.

Perform quality assurance/control inspections.

Provide support to the construction team, stores and procurement regarding quality control issues.

Providing proactive support for all QC related problems and ensuring root cause issues are identified and resolved.

Establishes and maintains the Project Quality Plan and procedures and audit schedule to monitor internal QMS.

Coordinating with manager for Scheduling, Performing Internal Audits and reporting the findings.

Ensuring the adherence to HSEQ requirements from Proposal stage of the Project of Completion stage of Project

Working with the project team to define the Project KPIs

Capture, qualify and record variation/concession requests as per company requirements.

Determines cause of non-compliance, identifies corrective action, organizes management reviews and manages the lessons learned program

Oct 2006 to

Nov 2008

QC Inspector – Instrumentation & Controls

NSH Corporation, Jubail, KSA

Projects :

Advanced Polypropylene Company- Construction & Commissioning

Olefins Conversion Unit, IBN ZAHR- Construction & Commissioning DUTIES & RESPONSIBILITIES

Understands the Contract drawings and specifications specific to aspect of the work

Receives and attends the Inspection Requests and E&I activities ensuring that works are carried out according to specifications, Inspection and Testing Plan, method statement and approved shop drawings.

Perform and accurately record all inspections, checks and tests in accordance with project processes and specifications

Ensuring all incoming goods are compliant to relating drawings/specifications.

Checking material certificates in accordance with company Quality requirements.

Reports to Lead QA/QC Engineer on site progress, quality and safety non compliances.

Coordinates with other inspectors on joint inspections.

Assists in the taking-off of site measurements and checking of such measurements on site.

Maintains contemporary site records and photographs.

Assists Lead QA/QC Engineer in the preparation of the daily, weekly and monthly reports.

Any other duties as may be assigned from time to time by Lead QA/QC Engineer. Aug 2005 to

Sept 2006

Testing And Commissioning Engineer

Larsen & Toubro Plastic Machineries Limited, Chennai, India Machines Manufactured:

Plastic Injection Moulding Machines

DUTIES & RESPONSIBILITIES

Testing and Commissioning of the injection Moulding machines, that includes,

Starting up of the injection Moulding machines

Troubleshooting and rectifying problems related to hydraulics, electrical software and mechanical

Strain gauging test for the machines

Plasticizing test for the machines

Performance tests

Apr 2005 to

Jun 2005

In plant Trainee- Maintenance

PMP Components, Satara, Pune

Products Manufactured:

Alternators, Starter Motors and Wind shield washer Pumps for Automobile Industry DUTIES & RESPONSIBILITIES

Daily, Weekly and Monthly Maintenance of production line.

Troubleshooting and rectifying problems related to hydraulics, electrical and mechanical Page 5

On the job training and Industrial project Designing Planning and Execution. Project: -Automatic Magnetization of Sector Magnets for Wind shield Washer Pumps.

-Retrofitting of Hydraulic Press.

COMPUTER SKILLS

Strong computer skills with working knowledge of Microsoft packages; M S word, Excel, PowerPoint Industrial Automation Software: Siemens TIA Portal, Delta ISP Soft, DOP Soft, ASDA Soft, Schneider Zeliosoft etc. PASSPORT DETAILS

PASSPORT NO : M2279813

PLACE OF ISSUE : ABU DHABI

DATE OF ISSUE : 25/11/2014

DATE OF EXPIRY : 24/11/2024

PERSONAL PROFILE

Date of birth : 31-03-1985

Nationality : Indian

Language known : English, Hindi, Malayalam &Tamil

Marital status : Married

Residence Contact No : +914********* (INDIA)

: +971********* (UAE)

Driving license : LMV License -UAE

DECLARATION:

I do hereby solemnly declare that the particulars furnished above are true and correct to the best of my knowledge and belief.

Date: 05.03.2022 JENSON T V

Place: Sharjah

Contact this candidate