Qc Engineer Control Room
Resume:
CURRICULUM VITAE
RAMESH YADAV
Permanent Address –
Vill- Karsauli gaur
Post - Maltari
Dist- Azamgarh
State- U.P
Pin code- 276138
Contact No- 879-***-****, 878*******
Email : *****.******@*****.***
OBJECTIVE:
To seek a result driven career position with dynamic growth oriented organization, which could facilitate application of my Technical & Management Skills to provide the organization with strategic edge over its competitors.
Experience Summary
A result oriented professional with about 05 years 09 months of experience in Instrumentation Construction and Quality Control & Assurance in major industries like Refinery and Petrochemicals for construction and inspection in India. Current Project:
Employer : Bonace Engineering Ltd.
Position Held : Instrument Executive
PMC/Client : HMEL(EIL)
Project :Guru Gobin Singh Refinery (DFCU Unit).
Duration : Since January-2022 to till now.
Previous Project:
Employer : ANI INTEGRATED SERVICE LTD.
Position Held : Instrumentation QA/QC Engineer
PMC/Client : PDIL/ HURL
Project : Ammonia &Urea Plant Of 2200 MTPD &3850 MTPD, HURL, Sindri, Dhanbad. Duration : Since Sept-2020 to Nov-2021.
Previous Project:
Employer : G&S Company Pvt. Ltd.
Position Held : Instrumentation Jr. Engineer
PMC/Client : EIL/HMEL
Project : HMEL SWING BHATINDA PUNJAB
Duration : Since Nov-2019 to May-2020.
Previous Project:
Employer : ANI INTEGRATED SERVICE LTD.
Position Held : Instrumentation Asst. Engineer
PMC/Client : Reliance.
Project : J3 at Reliance, Jamnagar, Gujarat. (Project /HNU Aromatic Shutdown) Duration : Since Jul-2018 to Sept-2019.
Previous Project:
Employer : TECNIMONT PVT. LTD.
Position Held : Instrumentation Supervisor
PMC/Client : Reliance.
Project : J3 at Reliance, Jamnagar, Gujarat.
Duration : Since August-2016 to Jul 2018.
Duties & Responsibilities:
Review of Documents (i.e. ITP, Eng. Std. Method of statement), Material submittal, Factory Acceptance Test reports.
Incoming Material inspection & Material preservation for the Instrumentation works.
Review of project specifications/code requirements and their implementation in the field.
Surveillance of ongoing construction activities on daily basis to make sure that all the activities performed at site based on approved specification, latest drawing, ITP, Method statement, and work executed as per approved project Quality plan.
IEC-60529 –Degree of protection provided by enclosures (IP code).
Familiar with Industry Codes & Standards, Specifications such as ISA RP 12.6, ISA RP 12.2.02, ISA TR12, ANSI MC96.1, IEEE 518,IEEE 1110, 250,UL-94&NFPA-70/NEC.
Inspection of F&G detector installation for indoor and outdoor application.
Installation inspection for Telephone system,LAN system,CCTV system,PA/GA system and ACS system.
Inspection of Grounding works,Duct bank,Raceway, trench for direct buried cables.
Monitor the underground Cable laying and check the required burial depth and spacing requirements to adjacent installations prior to backfilling.
Preparation and Submittalfor RFI for completed works.
Leak test (Hydro test/Pneumatic) witnessing for Process Impulse tubing.
Responsible for checking as-built drawings and submission to client.
Prepared and maintained Inspection records.
Walk-down with client for sub-system.
Loop folder preparation & review of loop folder.
Installation of junction boxes, control room panels, Inst cable laying, glanding and termination, Installation & Calibration of various field Instruments, Transmitters & Switches (Pressure/Level/Flow /Temperature/Gauges etc.) & cable termination in both field & control room. Cable tray fixing, cable tray and Instrument support fixing etc.
Loop Checking (Cold & Hot) and Pre-Commissioning & Commissioning Of field instruments (Pressure Transmitters, Flow Transmitters, Level Transmitters, valves and Vibration/Temperature Sensors etc.), Functional Test of the Instrumentation Systems and Control Panels, Setup/Configure of DCS, ESD, F&G Systems, PID Tuning and Analyzers.
Well adequate with the Loop folder preparation, pre commissioning and the commissioning activities for controls & instrumentation such as Loop checking, Functional logic checking, Site Acceptance Test and Instrument calibration.
Well adequate with the control logics, Functional description, Cause and Effects of fire & gas system, loop drawings, data sheets, I/O list and instrument list, control system & instrument layouts, site acceptance test procedures and commissioning documents.
Supervised and coordinating with the instrumentation team for the Loop check, Functional logic check of control system and the field instruments (Pressure transmitters, Flow transmitters, Level transmitters, Temperature transmitters, Switches, Valves).
Ensure the correct application of the Project Quality Plan in site activities, the supervision/coordination of the quality control activities and the implementation of the Quality Control Plans, relevant to electrical/instrument construction / commissioning activities.
Ensure compliance with budget limitations, monitor spend and advise on any possible overspends to senior management. Setting up comprehensive Instrumentation Construction schedules/plans as required to run alongside project planning and cost control.
Confirm vendor personnel are scheduled in line with suitable Instrumentation personnel being available for support. Ensure manning is planned in conjunction with all schedules and mobilizations are in line with requirements, with emphasis ensuring packages are completed in conjunction with other Completions and Construction teams.
Ensuring that all discipline check sheets required to be completed after activities detailed on them are completed in the field are checked and submitted to the field are checked and submitted to the completions data base on a daily basis.
Ensure that all the ITR check sheets are placed as per the sub system and filled after checking in the field and witnessed by the Client. Part of punch list walk down team at Mechanical Completion handover point. Perform related duties as and when directed by Direct Supervisor or Mentor.
Conduct tool box talks with discipline team. Perform all the tasks in accordance with company’s quality and HSSE plans and procedures.
Educational Qualification-
1) 10th Standard From UP Board With 67% Marks.
2) 12th Standard From UP Board With 75% Marks.
3) 3Year Diploma In Instrumentation & Control Engineering From UPBTE With 71% Marks. Other Qualification-
ITI Limited Vocational Training Certificate (10-07-2014 to 06-08-2014) Sofcon India Pvt. Ltd. Sofcon training (14-01-2016 to 14-01-2016 PERSONAL DETAILS
Father’s Name - Mr. Balkisun Yadav
Mother’s Name - Mrs. Gyanmati Devi
Date of Birth - 08 _ Jul- 1996
Language Known - Hindi and English
Hobbies - Traveling
Passport
Details:
Passport no 1526606
Date of issue : 11.07.2016
Date of expiry : 10.07.2026
Place of issue : LUCKNOW
DECLARATION-
I hereby declare that above information is true to best of my knowledge and if You will give me a chance to work under your kind control I will try to satisfy You with my hard work ability and behavior
Date
Place
RAMESH YADAV
Contact this candidate