Dante Agtuca Sarvida

aduj48@r.postjobfree.com; aduj48@r.postjobfree.com

093********; 099********

Philippines

**-* ****** ******, ********* Village, Panacan, 8000 Davao City

Basic Information

Age

56

Birth Date

April 09, 1966

Gender

Male

Civil Status

Married

Height (cm)

168

Weight (kg)

72

Nationality

Filipino

Religion

Roman Catholic

Work Experience

MECHANICAL CONSTRUCTION MANAGER

J.V. ANGELES CONSTRUCTION CORPORATION [Address: 1 Eulogio Rodriguez Jr. Avenue, Pasig City 1600, Metro Manila, Philippines

T: (082-***-****; (02) 8671 0043 to 47]

December 17, 2021 – August 30, 2022

Company Industry Engineering, Procurement and Construction of water supply and sewage systems, water treatment plants, wastewater/sewage treatment plants, hydropower plants, dams, tunnels and aqueducts, pipe laying, utilities, and civil infrastructure. JVACC is a licensed “AAA” contractor by the PCAB, an ISO 9001:2008, ISO 14001:2004 and OHSAS 18001:2007

Location Davao City Bulk Water Supply Project of Davao City Water District, Philippines

Job Responsibilities

● Directly reporting to the Design Manager

● Responsible for providing engineering and technical support to plan, schedule, coordinate and execute the full life cycle commissioning of all equipment in the different facilities of the project

● Participated in the MEP design process, witness the static and dynamic testing of complex mechanical, electrical, and controls systems, and operate the system in normal, maintenance, and failure modes of operations

● Provided overall commissioning mechanical engineering expertise to project activities

● Reviewed and contributes to the Detailed Design Contractor’s production of the mechanical activities

● Assisted with all mechanical aspects related to equipment selection, design, installation, commissioning, and start -up planning

● Conducted project team member briefing sessions with respect to engineering requirements and processes

● Provided mechanical engineering input for Hazard and Operability (HAZOPS) reviews

● Provided mechanical engineering input for Risk Management activities, as appropriate

● Reviewed Piping and Instrumentation Drawings (P&IDs) for safe and operable features

● Ensured equipment data sheet completeness and accuracy

● Contributed to mechanical equipment engineering studies and analyses

● Contributed to and attend Inspection and Test Plans, Site Acceptance Tests (SATs)

● Verified compliance with design methods and safety factors to be used in the design of the project

● Contributed to contractor’s mechanical team staffing, including staffing plans, and personnel suitability and adequacy

● Supported the establishment of the strategies, plans, and targets for the commissioning phase to ensure that key project objectives

are met with respect to HSE, quality/performance, schedule, and cost

● Supported the implementation of the Flawless Project Delivery in the execution of pre-commissioning and commissioning activities

● Monitored the mechanical equipment installation and pre-commissioning activities and ensure these are executed in accordance with the project HSE, technical specifications, quality standards, and procedures defined in the contracts

● Monitored material and equipment delivery and ensure storage, preservation, and maintenance are performed and recorded, in line with vendor requirements

● Reviewed and comment on documents on mechanical equipment including method statements, ITPs, work procedures, and practices

● Drove the mechanical discipline completion plan and transition from area to systems completion, pre-commissioning, and handover

● Cooperated and supported the team in the execution of Commissioning & Start-Up activities

● Contributed to the development of an overall commissioning and star-up logic and schedule, to ensure seamless transition and handover from Construction to Commissioning and to Operations

● Contributed to the development of the required overall progress monitoring tools for the commissioning and start-up phase and provide timely information on progress to the Engineering Manager and Project Manager

● Verified and validated the contractor’s compliance with its scope of work in support of the mechanical commissioning activities

● Supported the development of the Testing and Commissioning Plan

● Ensured the alignment of mechanical pre-commissioning and commissioning activities in accordance with the Project Completion and

Handover Procedure

● Provided technical support in the resolution of technical issues during the commissioning & initial start-up phase of the project

Page 1

● Ensured that the mechanical pre-commissioning and commissioning activities are properly organized, scheduled, and conducted

in a structured and safe manner, to test and certify that the installed equipment, complies with the agreed performance parameters indicated in the design documents and specifications

● Took proactive measures and maintain strict follow-up for mitigation of impact on delays/constraints to the overall commissioning and start-up schedule

● Responsible for providing remedial actions on any mechanical defects or failures that may occur during the Testing & Commissioning

(T&C) phase and verified/validated the remedial actions undertaken by the Contractors in accordance with the CSU Defect

Correction Procedure

● Performed other tasks as may be assigned by immediate superior

BRANCH HEAD – MECHANICAL, ELECTRICAL, AND CIVIL WORKS

TEMPWELL COMPANY – DAVAO BRANCH [Address: GB Prime Properties Door 6 Lot 5C, Don Julian Rodriguez Sr. Ave., Ma-a, Talomo, 8000 Davao

City, Davao del Sur, Philippines; T: (082-***-****]

October 19, 2020 – December 15, 2021

Company Industry Electrical, Mechanical, and Civil Works

Location Ma-a, Talomo, Davao City, Philippines

Job Responsibilities

● Directly reporting to the General Manager

● Responsible for planning, supervision, monitoring, and controlling of work schedule within time and quality standards to ensure

that there are no unresolved tasks within the agreed service level

● Responsible to control and monitor project total expenditure including verifying invoices and claims from suppliers, vendors, and subcontractors to ensure that all project expenditures are captured and properly recorded

● Provided planning and cost-controlling support for all projects which includes variation reporting, monitoring of milestones and progress to the preparation of customer billing processes, etc.

● Performed and managed project activity scheduling and monitoring

● Performed technical and commercial reviews of long-time tenders (subcontractor’s quotation) for the preparation of Service

Agreements

● Ensured effective project implementation and utilize productive reports from the creation of WBS (Work Breakdown Structure) with the use of a project management system to monitor the status of all purchases, invoicing, and delivery up to the closure of the project

● Prepared progress/mobilization reports for the monitoring of the activities on a daily basis, and registered all downtime,

consumption, and other related issues relating to the project promptly to the project manager and management

● Coordinated and worked with the management team to resolve project issues to ensure the delivery/completion of the project

work

● Attended project meetings and discussions with the external Clients

● Performed project costing related and reported to the team and project management’s review on a monthly basis to ensure that

expenditures are kept within the project budget

● Provided cost control and planning advice to the internal team as and when required

● Undertook any other ad-hoc duties as required

ONSHORE HVAC FIELD ENGINEER

NOSCO – Japan on behalf of MITSUI ENGINEERING & SHIPBUILDING CO., LTD. [Address: Karang Geneng, 70 Km West of Semarang City, Batang 51261 Central Java, Indonesia, T: +62-21-319*****/31936644]

March 16, 2019 – January 15, 2020

Company Industry Project Management Team (Civil, HVAC, FFS/FAS, MEP & Infrastructure Works)

Location Batang, Central Java, Philippines

Job Responsibilities

● Reported directly to General Construction Manager

● Participated in basic layout and field engineering activities

● Interfaced with other disciplines, project team members, subcontractors, vendors, and the Owner (BPI)

● Attended relevant meetings, updated, and maintained issues/actions taken

● Coordinated design discrepancies for resolution, prepared documentation, and field design change requests between the MES Engineering Site team, MES Engineering Japan Design team, and subcontractors, as required

● Corresponded to queries from subcontractors, resolved drawing interpretation problems, conflicts, interferences, and errors

● Reviewed MES issued “For Construction” (FC) drawings, subcontractors shop drawings, Material Sample Sheets, Method

Statements, Field Inspection Noticed (FINs), and Technical Queries

● Prepared/disseminated all required documentation records, monitored the progress of site work, and documented approval status for HVAC including Fire Fighting, Plumbing, Sanitary Waste Water, Fuel Oil Drain Systems, and E & I works

● Coordinated installation schedule with team members and other disciplines working on the project

● Monitored site activities and make sure all rules and regulations are followed; made reports on daily progress made at work

● Ensured safe construction of HVAC and other mechanical, and E & I works according to rules and regulations set by the safety policy

● Verified that all completed work complies with applicable codes, drawings, and specifications

● Assisted and documented testing inspection process for a variety of tasks including a light test for ducts, adjusting phases of air and

hydronic fitting, balancing, underground piping system, and hydrotest

● Attended weekly and monthly meetings with MES M&E internal, subcontractors’ coordination, and DRW with the Owner to talk about

the project updates and completion

● Prepared “as built” drawings, and performed other duties and responsibilities, as required

Page 2

SENIOR ENGINEER - MECHANICAL

AZMEEL CONTRACTING COMPANY [Address: P.O. Box 3043, Dammam 31471, Saudi Arabia, T:+966-**-******* Ext. 3010]

April 01, 2015 – February 19, 2019

Company Industry Diversified Construction (Civil & Infrastructure - Mega Housing, Commercial, Shopping Malls, Industrial, Cement Plant, Hospital, Palaces, Resort, Sea Front, Warehouses, landscaping, hardscaping, etc.)

Location Dammam, Saudi Arabia

Job Responsibilities

● Directly reporting to the Project Manager/Head of Technical Team Division

● Responsible for conceptual studies, detailed design, field installation, and construction support

● Acted as the lead mechanical engineer for engineering, procurement, and construction project

● Maintained and promoted a focus on safety and Saudi Aramco’s deliverables

● Ensured effective communications with other engineering disciplines

● Responsible for equipment engineering scope, schedule, and budget

● Mentored and guided less experienced engineers

● Prepared mechanical equipment and packaged equipment specifications and data sheets, RFQs, technical bid summaries, and purchase recommendations

● Reviewed mechanical equipment vendor drawings, and data

● Interfaced with suppliers, clients, other engineering disciplines, and detailers/designers

● Prepared construction and installation scopes of work for mechanical equipment

● Participated in the development of P&IDs, package specifications, construction specifications, project schedules, project budgets, project staffing planning, and construction planning

● Provided support in the field for installation, commissioning, and startup of fixed, rotating, and packages equipment

● Facilitated kick-off meetings, pre-fabrication meetings, and vendor coordination meetings; coordinated with procurement, expediting, and supplier’s quality team; and managed non-conformance reports (RFIs)

● Developed or reviewed procedures for Factory Acceptance Tests (FATs) and witnessed hydrostatic tests and NDT

● Demonstrated familiarity with mechanical equipment design codes (ASME, API, PIP, ANSI, NACE, TEMA, and other international specifications and standards)

ADDITIONAL WORKS:

● Supported the estimating team with mechanical bids and tenders, such as Mechanical, Equipment Erection, Piping, Insulation, Plumbing, Fire Protection Systems, HVAC, Building Management Systems / Direct Digital Control, Water Treatment Plants (WTPs), Sewage Treatment Plants (STPs), Lift Stations, Fuel Stations, A/G & U/G Utilities & Distribution Network (Raw Water, Potable Water, Fire Water, Irrigation, Storm Water, Sewer Water, Fuel System or Process System

● Prepared and submitted prime cost estimates utilizing Microsoft Excel Worksheets Formats

● Liaised with engineers, consultants, vendors, and subcontractors to construct and formulate estimates and resolve issues

● Analyzed drawings, specifications, and other documentation to prepare estimates

● Identified and provided alternative design proposals, solutions, and value engineering options

● Established and maintained tendering processes and conducted negotiations

● Prepared and maintained a directory of suppliers, contractors, and subcontractors

● Monitored targets and workflow

● Controlled and organized tender documentation

● Strong time management and organizational skills; ability to work using own initiative with confidence and accuracy; high attention to detail and analytical thinking, and ability to communicate effectively

● Maintained confidentiality and observes data protection, and associated guidelines where appropriate; carry out any other reasonable duties and responsibilities within the overall function, commensurate with the grading and level of responsibilities of the post

BUSINESS DEVELOPMENT SUPERINTENDENT

MOHAMMAD AL-MOJIL GROUP COMPANY [Address: P.O. Box 11, Dammam 31411, Saudi Arabia, T:+966*********]

December 15, 2009 – April 15, 2015

Company Industry General Construction Services, Construction Support, Fabrication, Scaffolding, Technical, Camp & Catering,

Equipment, JV Construction Projects, and Telecommunication Services

Location All Major City of Saudi Arabia

Job Responsibilities

● Supervised and assisted in researching & developing the company’s business plans and analyzing business opportunities to achieve growth and financial profitability

● Prepared and updated Business Development Procedures

● Reviewed and contributed to department activity & operating reports

● Accountable for gathering and collecting business information on target market segments, data for new projects from Proponent, FEED, and EPC Companies, and for competitor contractors’ ongoing projects for comparison

● Prepared Client’s Pre-Qualification Questionnaire for submittal and registration requirements; and collected and submitted Bid Proposal

Documents

● Attended scheduled job explanation meetings (Pre-Bid Meetings) and site visits, and make technical observation/ commendation report

● Extensive knowledge of bidding procedures, the general scope of works, technical and commercial requirements, supplied by contractors/ subcontractors, bid bond, retention bond, performance bond, insurance and liquidated damages, instructions, general terms & conditions, BOQ/BOM, and milestone schedules

Page 3

● Reviewed Invitation to Bid (ITB), Invitation for Proposal (IFP), Request for Proposal (RFP) or Quotation (RFQ), Solicitation of Interest (SOI) or Letter of Interest (LOI), Confidentiality or Secrecy Agreement and Inquiry Acknowledgment Document, and prepared Bid Approval Sheet Form (BAS)

● Coordinated with the Engineering, Finance & IT, Equipment & Logistic, Steel Factory, Corporate Project Controls, Construction, Marine

Services, Industrial Technical Services, Corporate QA/QC, Corporate Safety & Loss (HSE), and Procurement & Warehousing of the development and implementation of the approved or awarded projects, and Pre-Qualification Questionnaires (PQQs)

● Assured that all bidding and business affairs are conducted in a legal and professional manner

● Provided assistance on matters related to advertising and promotional activities; maintained confidentiality unquestionable integrity and regular attendance

ENGINEER I - MECHANICAL

MOHAMMAD AL-MOJIL GROUP COMPANY [Address: P.O. Box 11, Dammam 31411, Saudi Arabia, T:+966*********]

January 23, 2007 – December 14, 2009

Company Industry General Construction Services, Construction Support, Fabrication, Scaffolding, Technical, Camp & Catering, Equipment, JV Construction Projects, and Telecommunication Services

Location Rabigh, Saudi Arabia

Job Responsibilities

● Directly reporting to the Field Engineering Manager

● Supervised and lead foremen, skilled labor, and work crews in all work activities, such as HVAC; Painting/Insulation/Lettering of all Equipment & Piping); Fireproofing of structural steel supports, Testing and Commissioning by utilizing exemplary expertise in the application of systematic and scientific work methods and procedures

● Optimized resources (manpower, equipment, and materials) to ensure efficient and timely completion of the projects

● Demonstrated excellent organizational skills; strictly followed policies, procedures, and work practices; and initiated improvements whenever necessary

● Prepared and submitted method statements, procedures, and As-Built drawings; competent in reading and understanding specifications, drawings, and all other disciplines related to project and engineering documentation

● Prepared method statements and procedures; competent in reading and understanding specifications, drawings, and all other disciplines related to projects and engineering documentation

● Enforced strict compliance with all QA/QC and Safety procedures including all Company rules and regulations

● Commanded respect from foremen, skilled labor, and discipline workforce; developed excellent working relationships with all other department personnel as well as Client’s management

● Led and motivated staff toward a common goal or objective for the completion of the project

● Gave instructions and conveyed knowledge in an efficient and effective way at all levels, client, management, supervisors,

co-workers, and staff

● Field Construction Operation is within the scope of the Contract and provided the necessary engineering assistance to the project

● Responsible for the necessary permanent materials required for the project, estimated quantity, and cost of additional materials required due to Change Orders or extra works considered, and prepared material requisitions

● Responsible and reviewed material quantity take-off interpreted construction drawings and determined subcontract items in order to minimize wastage and inefficiency

● Liaised with craft supervision and other disciplines to ensure optimum interface of the various operational activities, resolved engineering field problems, and checked design tolerances for the adequacy of the specification

● Reconciled quantities with the Client's estimates for Change Orders, and other engineering works directed by the Field Engineering

Manager

● Understood the principles and importance of planning; monitored and tracked daily progress and work completed, comparing planned to actual; took appropriate mitigating action to ensure compliance with the plan in cooperation with Planning Engineer and Project Management

● Supervised the preparation of one week/three weeks look-ahead plans for the mechanical works of the project, in close liaison with construction, planning, and other departments/disciplines

● Ensured that all work is in conformity with standards and specifications; interpreted specifications, and discusses deviations from specified mechanical procedures to ensure full compliance with QA/QC inspection plans and procedures

● Identified and implemented “on-the-job” training programs with the aim of developing and improving team members’ competency in required

skills and abilities

● Prepared, reviewed, and submitted RAM (Request for Approval of Material), TQ (Field Technical Query), FWN (Field Work Note), Change

Orders, O & M Manuals, Technical Data, and checklist

● Familiar with Saudi Aramco Codes, Petro Rabigh, or similar codes and safety procedures for construction, start-up, and commissioning

MECHANICAL DESIGN ENGINEER

AL-SADHAN GROUP [Address: P.O. Box 89322, Riyadh 11682, Saudi Arabia; T:+966-*********; E: aduj48@r.postjobfree.com; W: www.al-sadhan.com ]

October 26, 2003 – December 20, 2006

Company Industry Owned Hypermarkets with Restaurants & Amusement Centers, Supermarkets and International Specialized Stores

(Showrooms) including Engineering Management Department

Location Riyadh, Saudi Arabia

Job Responsibilities

● Directly reporting to the Head of the Engineering Department

● Prepared Mechanical Design-Bid Project for Al-Sadhan Hypermarkets, Supermarkets, and International Specialized Stores Company

(ISSCo.) in Riyadh, Saudi Arabia, i.e. HVAC, Fire Fighting, and Plumbing System

(BRANCHES: Al-Rawabi, Al-Rawdha, Avenue Complex, Al-Playah, Al Sahafa (16,000 m2 Area), Al Suleimania (17,000 m2 Area), Badia, Khurais (21,000 m2 Area), Shubra (10,000 m2 Area), Al Riyadh, and Okba in King Abdullah Road

● Set design criteria, and prepared IFC drawings, specifications, materials, and construction methods

● For HVAC, made load calculations, read and interpreted construction plans, designed ductworks and piping systems; calculated ventilation requirements; determined costs for HVAC, and detailed budget estimates

Page 4

● Coordinated and collaborated mechanical works between other trades

● Followed all building codes and obtained proper building permits when necessary

● Evaluated bids, negotiations, and advice on awarding of the contract

● Reviewed shop drawings, schedule, commissioning, and operating & maintenance manual

● Monitored, supervised, and inspected construction works

● Supervised commissioning: testing and balancing of all systems, functional testing, adjusting of components & integrated system and adjusting/ tuning the direct digital controls

● Modified drawings to the as-built condition, and the finalization of the operation & maintenance manual

● Knowledgeable in Building Maintenance Systems (BMS) for the air-conditioning system

● Acted as a Site Engineer (installation, testing, and commissioning); Estimator (Bill of Quantity), and Purchasing Engineer in all construction jobs

● Educated in Heating, Ventilation, and Air-Conditioning including Refrigeration Systems (HVAC & R), block load calculation, duct design, psychometric chart & utility, and refrigeration piping

● Educated in Fire Fighting Systems that include fire and jockey pumps, sprinklers, HEBA Fire Hose Cabinets, and Fire Extinguishers

● Educated in AutoCAD 2007, Microsoft Project 2000, Microsoft® Windows XP Professional Version 2003

● Managed construction jobs of International Specialized Stores Company (ISSCo.), a sister company of Al-Sadhan Group, i.e. air-conditioning system; firefighting system; and drainage, sewerage & water systems

ADDITIONAL WORKS:

● Assisted Maintenance Department of six (06) Al-Sadhan Hypermarkets and Malls all over Riyadh, Saudi Arabia, i.e. HVAC and

Refrigeration Systems; machines/equipment; and drainage, sewerage & water systems

● Machines/equipment handled, such as HVAC & R: Profoid Air-Cooled Reciprocating DX Cooler & Condensing Unit, Costan Commercial Display Refrigerated Cabinet, Costan Island Chillers, Trimco Pastry Chillers and Refrigerated Showcases of fresh food, like: fruits, vegetables, dairy produce, sausages, fresh meat, fresh chicken, juice drinks, soft drinks, cakes, and special cookies, Commercial Display of Island Freezers of frozen food like meat, ice cream, and chicken; Carrier Single-Package Rooftop Units, Carrier AHUs & LG Commercial Air-Cooled Split System and Window Type A/C Units; 4500W Bradford Electric Water Heater, Greenheck Belt Drive Upblast Centrifugal Roof Exhaust Fans, Greenheck Belt Drive Downblast Centrifugal Roof Exhausters, Greenheck Filtered Roof Supply Fans, Breidert Tube Axial Fans, KDK Wall Mounted Ventilating Fans, Machines/Equipment…500 kW Caterpillar Standby Generator, Schindler Escalator, Panoramic & Lift Goods Elevators, Corrugated Board Press Machine, Bakeries Equipment: Bongard Rotary Oven, Esmach Mixer, Pani Record Moulder, BimaticSarl Flattener, Fire Fighting System [Fire&Jockey pumps, sprinklers, Heba Fire Hose Cabinet and Heba Fire Extinguisher (CO2, ABC Powder & Halon)]; Others: Water Treatment Plant; Grundfos Brand deepwell, potable & irrigation water systems, diesel gas system, drainage, and sewerage systems.

SECTION MAINTENANCE ENGINEER

WAHAH ELECTRIC SUPPLY COMPANY OF SAUDI ARABIA [Address: P.O. Box 2389, Dammam 31451, Saudi Arabia; T:+966 13

8474242/8100234; E: aduj48@r.postjobfree.com]

October 20, 1995 – June 21, 2003

Company Industry Manufacturing of Electrical Distribution Equipment (2100 Series MCC, MV Starters, WLI/Metal Clad MV Vacuum Switchgears,

switchboards, panelboards, cable trays/ladders, oil-filled dist./dry type transformers, Non-Segregated LV/MV Busduct, and Fuse Cutouts)

Location Dammam, Saudi Arabia

Job Responsibilities

● Managed Machinery Maintenance& Development Section (MMDS) under Operations & Technology Department

● Responsible for Total Preventive Maintenance (TPM) & overhauling, i.e. hydraulic, pneumatic, HVAC, PLC, mechanical, electrical, electronic & automotive machines/equipment related to Manufacturing, Marketing, Quality Assurance, Administration, and Warehouse Departments to achieve planned production, and provide services

● Responsible for purchasing, maintaining, and forecasting safety stock of foreign, and local spare parts including consumable materials for machines/equipment, either mechanical, electrical, or electronic spare parts

● Responsible for all aspects of plant engineering; the history of machines/equipment, i.e. repairs, breakdowns, preventive maintenance, quality, and improvement initiatives, Operations & Maintenance Manuals, and other related documents

● Managed all day-to-day operations of the plant including training of staff; installation, testing/commissioning; and safety management programs to ensure efficiency, reliable operations, optimum production standards/capacity, and specifications of machines/equipment are maintained

● Responsible for troubleshooting (probable cause/remedies), fault diagnosis & vibration monitoring; analyzing condition monitoring data/trends;

conducting root cause analysis; and establishing quality control plans for critical machines/equipment

● Project management/implementation representative of all company’s engineering, and maintenance requirements, i.e. Fixed Assets Inventory,

Annual Budget, feasibility, improvements, and special projects

● Administered personal needs of MMDS Personnel, i.e. ordering and issuance of safety uniforms, safety shoes, First Aid Kit, tools, and general tools

● Act as a Planning Engineer of MMDS Activities between shop supervisors, technicians, operators, contractors, outside services, and suppliers concerned with proper scheduling with respect to production

●Knowledgeable in all sections of the workshops, i.e. Steel Shop, Machine Shop, Fabrication, and Welding Shop

●Knowledgeable in AutoCAD 2000, Microsoft Project 2000, Microsoft® Windows XP Professional Version 2002

● Certificate of Recognition:

April 04, 2002 General Manager’s Selection Man of the Year Award for Year 2001

April 04, 2002 Best Performance in 2001 as a Section Engineer in MMDS

December 31, 1999 Best Performance as a Production Planning Engineer – O & T

December 31, 1998 Best Performance as a Quality Council Member

● The company products are electrical distribution equipment, like Transformers (Compact Substation, Power, Cast Resin, Pole Mounted ANSI Pad Mounted, and Dry Type); Non-Segregated Phase Bus Duct; Cable Bus; Switchgears (MV Metal-Clad, and DS II Low Voltage); Series 2100

Motor Control Center; Outdoor Low Voltage Switchrack; UL Listed Panel Boards; Cable Ladder and Fuse Cutout Series “C”

● Machines/equipment maintained are Amada CNC Turret Punch Press MCs, Amada Laser FO3015/C4000A MC, Clemco Shot Blasting Equipment, Georg TBA/ME/HY 400 x 2000 Transformer Lamination Cut-to-Length MC, Bison ST-059 Fin Folding MC, Broomfield S-600B/350/350C25P/700STR/

900 B/STR Winding MCs, CEC JOB NO. 02-2622 Annealing Furnace, Atlanta Grotnes 023-11-MP Core Wrapper MC & 99-2795 Single Coil Uncoiler, Vacudyne J85-51-01-00-01Vacuum Chamber, Metito Reverse Osmosis 57H100 Plant, Phenix TTS 400 Transformer Testing Equipment, Nordson Powder

Page 5

Coating System, Haco 260 Ton ERM40260 CNC Press Brake MC, Haco HSLX4010 x 10 Shearing MC, Hayes 11212/11213 SP Rafted/ Sheet Feed Rollformer MCs, Arras Maxei MAS 3000 Oil Upgrading MC, Ingersoll-Rand N100H Air-Compressor, Ingersoll-Rand TS700 Air Dryer, Pelloby 2.0-12.5 Tons Overhead Cranes, Miller Deltaweld 402/Syncrowave 350LX/Goldstar SRH-500 Mig/Tig/Arc Welding MCs, FroniusMagicwave

450 Tig Welding MCs, Nelson Stud 4800-101 Welding MCs, Thermadyne Plasma WM-012 Welding MCs, Caterpillar 3.5-7.0 Ton Electric/Diesel/ LPG Forklifts, Warco 3040 Paper Slitting/Cuffing MC, Perkins 360S1352 Diesel Generators, UNI-Hydro 80-24 Shearing MC, Thermwood 40/5x5

CNC Machining Center, Novopress Cutting/Punching/Bending MCs, Sta-Warm BDC Sulfur Melting Tanks, Phenix SBL Voltage Stabilizers, Chelsea

RDB445QA Exhaust Blowers, Tenkay 2FDC Dust Collectors, to name a few

● The company is a licensee of Unibus, Inc.; Powell Industries, Inc.; Cutler-Hammer; MP Husky and Chance® and with ISO 9001 KEMA Certificate, i.e. Cert. Nr. 55179. Our customers

Contact this candidate