Jerry W. Brennan

*** ****** *****

Cary, NC *****-1738

Home: 919-***-**** Cell: 919-***-****

Email: aduef9@r.postjobfree.com

OBJECTIVE

A position in a Engineering / Design support group where Mechanical/Electrical designer sills in Process or Power Plant design experience can be utilized in the further design or scale up of existing plants or participate in the design of a new facility.

QUALIFICATIONS SUMMARY

Over Thirty years experience in the Engineering, Design, and Construction of Power Plants (Nuclear), Pulp and Paper, Textile, Pharmaceutical, Chemical, and Cement Plants. The ability to plan, determine priorities, and clearly convey objectives to be achieved to a client within a set time frame and to work independently on several projects concurrently. Strong personal communication skills. Capabilities include:

Extensive multiple discipline experiences in Plant Design and Modification work as follows:

●Estimating Jobs and preparing/reviewing bid packages for projects

●Working with on site contractors to supply technical

support during the construction phase of projects.

●Thoroughly familiar with the Nuclear Power Plant

Modifications and Installation process.

●Thoroughly familiar with Operating, Maintenance, Testing and Configuration Management concepts at Nuclear Power Plants

●Developing Cad Design Drawing for the following:

●Piping P&ID’s & Flow Diagrams

●Orthographic Piping Layouts & Isometric

●Pipe and Conduit Support Details

●Instrumentation Tubing Layouts & Isometrics

●Electrical Controlled Wiring Diagrams (CWD”S)

●Electrical Cable Conduit & Tray layouts

●Developing Specs for Purchasing Major equipment

●Equipment layout for General Arrangements

●HVAC ductwork layouts and Fabrication details

●Material Handling Conveyor Design and General

●Arrangements Electrical Cable and Conduit Lists

●Structural Platform Design and Details

●Concrete Masonry and Rebar Design and Details

EXPERIENCE

3/24/2020 - 12/17/22 WECTEC (Westinghouse) Assigned to Vogtle Plant 3& 4 in Waynesboro GA

Supervisor: Alex Thirkell, Design Task Engineering Manager

Design Task Engineer : Support the Construction of Southern Vogtle Nuclear Plant Unit 3&4 (New Construction)

Review assigned Systems for completion and turnover to Integrated testing Group (ITP) from construction thru construction walkdowns and verification that all ourstanding change documents are incorporporated into plant Design drawings and carried through to work package preparation so that turnover contains a complete design for testing and final turnover (transition) to operations.

1/2/2019– 12/31/2019 - ENSERV/ESG INTERNATIONAL assigned to Duke Energy @ Shearon Harris Nuclear Power Plant, New Hill, NC

Supervisor: David Shockley : Configuration Management Manager:

Senior Mechanical Designer/and Configuration Management Specialist: Support the Nuclear Plant Projects Design Group in the preparation of Engineering Design Changes (EC'S) for plant modifications under the Projects design group direction. Familiar with all aspect of the Plant Modifications process at Duke Energy Nuclear Plants using the CAS/FUSION Database and CAD system.

IE: Scheduling, Planning, Equipment Database (EDB) input, work Order process, Operations and Maintenance Procedure updates, Field follow, Preparation of Design changes to affected Documents, Field sketches for implementation, required Turnover Documents and detailed installation instructions.

6/21/10 – 6/1/2018 - ENSERV/ESG INTERNATIONAL assigned to Duke Energy @ Shearon Harris Nuclear Power Plant, New Hill, NC

Supervisor: Brian Robak: Nuclear Pant Projects Manager:

Senior Mechanical Designer/and Configuration Management: Support the Nuclear Plant Projects Design Group in the preparation of Engineering Design Changes (EC'S) for plant modifications under the Major Projects design group direction. Familiar with all aspect of the Plant Modifications process at Duke Energy Nuclear Plants using the CAS/FUSION Database and CAD system.

IE: Scheduling, Planning, Equipment Database (EDB) input, work Order process, Operations and Maintenance Procedure updates, Field follow, Preparation of Design changes to affected Documents, Field sketches for implementation, required Turnover Documents and detailed installation instructions.

Projects worked/working on: NFPA 805 Implementation, Turbine Lube Oil Cooler Redesign and Replacement, Central Alarm Station (CAS) Relocation project, Turbine Controls System Upgrade (TCS), Fire Detection System Infrastructure (Redesign and Replacement), Fukushima Design Project, and Tactical Intercom System Project..

12/8/08- 6/18/10 Bechtel Power Corp. assigned to Watts Bar Unit 2 startup

Supervisor: Pedro Garcia: Piping Layout & Design Group Supervisor

Piping Design Group Lead: Support the Mechanical Design Group in the preparation of Engineering Design Construction Request (EDCR) for Watts Bar Nuclear Plant Unit 2 Start up and Unit 1 operating plant modifications (DCN) for upcoming outages.

3/15/2003 – 12/5/08 ESG INTERNATIONAL assigned to Progress Energy @ Shearon Harris Nuclear Power Plant, New Hill, NC

Supervisor: Tony Manes (Safe Shutdown / Fire Protection Focus Group)

Senior Mechanical Designer: Working under the engineering design section in the Fire Protection Focus Group.

During the transition to the NFPA 805 Licensing Basis and the Re-validation of the Safe Shutdown analysis in case of fire several plant modifications are required to bring the plant fully under the new program. The bulk of the work involves rerouting cables due to violation of train separation in the same Fire Analysis area or the possibility of spurious actuation of equipment in a fire scenario to insure protection of at least one credited train for safe shutdown of the plant in case of fire. Involved in preparing design change package per the plant modification procedures including all the design document changes i.e. drawing changes, CCL changes, procedure changes, FSAR and Technical Specification changes. Working with operations, maintenance, system engineering, planning and field to resolve any comments. Then implementing the modifications through closure.

7/98 - 8/30/2002 ESG INTERNATIONAL assigned to Progress Energy @ Shearon Harris Nuclear Power Plant, New Hill, NC

Supervisor: David Shockley (Configuration Management)

Senior Mechanical Designer: Working down the backlog of Engineering Service Request (ESR) items at the Shearon Harris Nuclear Power Plant. This involves researching plant-engineering request for plant modifications to determine their feasibility as a design change package. Preparing a design change package per the plant modification procedures including all the design document changes i.e. drawing changes, operations and maintenance procedure changes, FSAR and Technical Specification changes. Working with operations, maintenance, and system engineering to resolve any comments and implementing the modification through closure.

Resume continued :

Involved in the Design review for the Steam Generator Replacement outage. Bechtel Power did the engineering and construction. Worked with Bechtel Field Engineers on final walk downs for configuration verification on final turnover of the Steam Generators.

Checking Configuration Control drawings for their accurate incorporation of field completed design change modifications. The review process included a history analysis of the drawing to determine an accurate reflection of plant configuration for control room use.

Technical review of plant modifications to ensure that the applicable design requirements, such as design basis, NRC requirements, codes & standards are correctly translated into the associated design documents (i.e., drawings, specifications, and procedures). Interface between Engineering, Operations and Maintenance Units to resolve any problems encountered during Engineering’s review of the modifications

1/96-7/98 BE&K Engineering and Consultants, Raleigh, NC Supervisor: Sam Miller

Senior Mechanical Designer/Material Handling: Developed equipment General Arrangement Drawings for Pulp & Paper, Particleboard, Cement and Textile industry. This included designing the equipment supporting structure and positioning the associated stairways, ladders and platforms to make provisions to satisfy all operational, maintenance and safety requirements for access and clearance around equipment. Experienced in conveyor layout, design, and belt and motor horsepower sizing.

Senior Mechanical Designer/Piping: Develop process flow diagrams and general arrangement drawings for the routing of major above and below grade piping systems meeting all client specifications and local codes and regulations. Adhering to all engineering codes and practices. Responsible for complete process and utility system piping and support layout for the system assigned to me. Including generating piping and valve specifications and vendor bid package submittals. Also, duct work layouts for office building additions to plants.

7/95-12/95 CPM Engineering Cary, NC Supervisor: Kimble Garrett

Senior Mechanical Designer/Material Handling Developed chip conveying equipment General Arrangement Drawings and detailed design for the supporting structures including associated stairways, ladders and platforms for the Weyerhaeuser Moncure Particleboard Plant modification.

11/93-6/94 Viatech Services assigned to: BE&K Engineering and Consultants, Raleigh, NC Supervisor: Sam Miller

Senior Mechanical Piping Designer: Responsible for the Phosphorous Calcium Carbonate (PCC) system and the Starch Slurry tank and cooker addition and upgrades of International Papers Georgetown SC paper mill. Responsibilities include the complete piping system layout for the PCC addition and the Starch Cooker System to the No. 1 paper machine. Responsible for the piping layout and tank design of the Amino acid transfer and Storage Tank farm addition to the Ajinomoto Pharmaceutical USA plant, Raleigh, NC.

8/87-11/93 Quantum Resources assigned to: PROGRESS ENERGY Nuclear Engineering Department, Raleigh, NC Supervisor: Mike Pugh

Senior Mechanical Piping Designer: Responsible for the design of minor and major modification projects to the Harris Nuclear Power Plant. Some of the major project are as follows: The replacement and upgrade of the Secondary Sampling System, the abandonment of the Steam Generator clean up system and the addition of the Steam Generator Heat Recovery and Regeneration System, and the addition of the Hydrogen gas analyzer rack for the Main Steam Turbine. Most projects encompasses the development of cost and scope estimates for the proposal phase, and/or revision to the existing Piping & Instrumentation Diagrams (P&ID’s), the piping arrangement drawing and isometrics, general equipment layouts, a complete bill of material and the purchasing of specialty valves and equipment. Also support the field during installation phase of the modification.

EDUCATION

1978 Indiana University Southeast, New Albany, IN, Engineering / Business program classes

1982 Louisville Technical Institute, Louisville, KY, Certified Architectural Design Diploma (2 year degree)

EXPERIENCE/SKILLS

CAD – Microstation, AutoCAD, Iras-B (Raster imaging), Corel Draw

Nuclear- General Employee Training (current), Rad worker Training (current)

Plant Mod qualified (not current),10cfr50.59 Safety Review Qualified (not current), Passport Database Programs

Other - Proficient in the use of Microsoft Word, Excel, Access. Visio, Adobe Acrobat

Also proficient with PASSPORT database version 10 for modifications and equipment additions.

REFERENCES: David Shockley 919-***-**** (Supervisor) Brandon Lane 919-***-**** (Manager)

Contact this candidate