Temidayo Abimbola
**, *********** ******, ********-****** Lagos State 100261 070******** adueb6@r.postjobfree.com www.linkedin.com/in/temidayo-abimbola-81353297
SUMMARY
I am an automation engineer with five years of professional experience in instrumentation and industrial automation with engineering management skills across multivariate industries, including FMCG, Field service, and Oil and gas. I am skilled in Siemens and Allen Bradley PLC, among others, with solid maintenance and electrical troubleshooting skills with good project management experience.
EXPERIENCE
Instrumentation/Automation Specialist
MRS Oil and Gas Nigeria PLC - Bestaf Trading Co.
12/21 – Present
Ensure 100% daily operational status of the existing control system and handle Maintenance, modification, and troubleshooting faults in the existing automation control system at Bestaf Lube Plant, Tincan Terminal, and Apapa FOT
Handle designing, programming, installation, and commissioning automation projects to ensure smooth project implementations
Manage Ignition SCADA 8.1 platform- Trends and Alarm management, real-time Vision development, and Power Management (BMS) of more than twenty (20) UPS, Capacitors, Electrical Panels
Manage Siemens PCS 7.0 Engineering Workstation/SCADA system Management for the batch process control of lubricant blending with recipes.
Conduct calibration of flowmeters for sixteen eight (8) islands as required using a prover tank and master meter to maintain accurate dispensing of white products and base oil to customers under DPR standards.
In charge of tank farm automation, tank gauging systems, pumps, control valves, VFDs
Execute instrumentation project deliverables like FEED, P&ID, and PFD
Resolve technical issues, configure and program servo drives and VLT Automation Drives FC301/302
Projects and Achievements
Deployed real-time SCADA designs involving power monitoring screens, building layouts, historical alarms, real time trends and OPC tags in the EF014 Tincan-Island Terminal Building Management systems deployed on Ignition SCADA 8.1.
Re-commissioned and upgraded an automated grease production line improving output delivery by 12%
Managed and supervised from start to finish, the replacement of ATG cables for eight (8) 11 million litres tanks at MRS Apapa FOT.
Instrumentation/Automation Manager
PZ Cussons
04/21 – 12/21
Managed a team of 6 Instrumentation technicians to optimize processes and reduce downtime by applying Innovative technologies and Continuous Improvement (CI)
Ensured critical instrumentation systems and processes operate effectively, efficiently, and safely
Collaborated with OEM during the commissioning of new equipment or installation upgrade and for special Intervention on all automated equipment
Collaborated with the production team daily to plan human and material resources and execute planned maintenance jobs and spare management using AGILITY 9.0 CMMS interfacing with manufacturing execution systems.
Responsible for calibration and maintenance of weighbridges and process instruments
Improved OEE by 20% by ensuring that machines operate with minimal downtime, reliability, and maintainability.
Programming, maintenance, and troubleshooting of PLCs- OMRON, ALLEN-BRADLEY MICROLOGIX, COMPACTLOGIX CONTROLOGIX, SIEMENS S7300, 400, 1200, 1500 PLC
Configuration and maintenance of inverter drives and servo drives- POWERFLEX, ABB, YASKAWA, SINAMICS, KINETIX SCHNEIDER ELECTRIC
Slashed production costs and improved OEE from 60% to 80% by Innovating and implementing lean tools in soap manufacturing systems
Interpret and update P&IDs, and PFDs as required
Ensure team adheres strictly to HSE and QMS standards according to ISO
Experienced in Binacchi soap process plants, Flow wrapping machines, Overwrapping machines, Noodle conveying systems, and Plodders
Projects and Achievements
Installed and commissioned an Endress Hauser vortex flowmeter to capture plant air usage at a flowrate of 600 l/s, consequently reducing energy costs by 10%
Upgraded Plodder Electrical control panels, consequently increasing line OEE by 20%
Eliminated noise in a Yaskawa servomotor by altering PID parameters in the Yaskawa motion controller program, improving Imperial leather Soap Line OEE by 10%
Upgraded the firmware of a Compact Logix PLC on a Khosla Flow wrap machine program using control flash software
Commissioned an ABB ACS 880 inverter drive for SPM plodders on Canoe soap line 2
Lead Instrumentation/Automation Engineer
Modshindella Nigeria Limited
03/19 –03/21
Slashed (Buhler) milling machine downtime by resolving a Profibus network fault of 15 nodes at Cereals Plant, Nestle PLC, Agbara
LV/MV Switchgear, Protection relay configuration and management
Maintained good production standards by calibrating analytical(conductivity), pressure, and temperature measuring instruments at Anheuser-Busch InBev, Port Harcourt
Upgraded the power control system of six (6) Gas Generators, 6.0 MW capacity at Cannaanland Independent power plant
Eliminated downtime on a booster compressor unit at MBH power by resolving software issues on S71200 PLC.
Designed HMI screens to improve operator’s interfacing with CAT engines at NISPO Porcelain Co.
Synchronized 4 CAT gas generators via COMAP platform for Big Bottling Co. Nigeria
Optimized the functionality of a gas booster compressor by 60% at Cannaanland Independent power plant
Commissioned vortex cooler units for four electrical panels at Big Bottling Co., eliminating panel cooling problems
Automation Intern
Modshindella Nigeria Limited
05/18 – 03/19
Successfully designed, deployed, and integrated a smart alarm control system using the Haiwell Automation Platform for Perfetti Van Melle
Commissioned seven (7) PID controllers in a brownfield project for OLAM OIL processing plant
Actively designed electrical drawings and P&ID using AutoCAD for troubleshooting and referencing aid
Robotics Intern
I-Lab Robotics
05/15 – 08/16
Engaged in innovative projects using Arduino micro-controller
Implemented innovative robot designs
Programmed Lego robots using Lego Mindstorm and Nxt software
EDUCATION
M.Sc. Engineering Management in View
University of Hull
01/22 – 08/23
B.Sc. Electrical/Electronic Engineering
Obafemi Awolowo University
01/11 – 08/16
CORE SKILLS
Engineering Instrumentation Calibration Siemens 300, 400, 1200, 1500 Allen Bradley Micro, Compact, Control Logix Panel view, Simatic panel TIAPORTAL WINCC Wonderware SCADA HMI Electrical Automation Design Sensors Ignition Scada Sensors Transmitters HART MES TPM AutoCAD 2D, 3D Six Sigma Process control P&ID VFD IP Networking OPC Servers Ethernet Profinet Profibus Control net Device net RS232, 485 Modbus Microsoft Word, Excel, Power point Project management VBA
SOFT SKILLS
Leadership Communication Critical thinking Strategic planning Teamwork Work ethic Time management Self-driven Networking
CERTIFICATION
Riterac Consulting Nigeria Limited:
Lean Six Sigma (Yellow Belt)
Google:
Foundations of Project Management
Siemens SITRAIN:
PROFINET
Data Communication with Industrial Ethernet
International Society of Automation:
Concepts of Process Control
Rockwell Automation:
Control Logix 5000 System Fundamentals
LinkedIn Learning:
Raspberry Pi Essential Training
Six Sigma Foundations
Learning PLC Ladder Logic
AutoCAD Electrical: Essential Training, Implementing PLCs
Project Management
5S Workplace Productivity
SAP ERP Essential Training
Applied Engineering Training Institute (AETI):
Automation Engineering Certification
Ats Allied Group
Instrumentation and Control in Plant and Facility Design