Jason Feltner

AWS D*.* / D*.* X-ray certified Flux core welder

Auburn, PA 17922

aducln@r.postjobfree.com

+1-570-***-****

Authorized to work in the US for any employer

Work Experience

Machine Operator

Foam Holdings - Allentown, PA

August 2022 to Present

I operate a hot wire foam cutting machine. I set up and maintain the machine using PLC controls. I am responsible for the quality checks on finished product. Security Officer

Securitas - Myerstown, PA

September 2021 to Present

Patrol site and log in trucks as needed

Assembly / Machine op

Mack Truck - Macungie, PA

November 2017 to September 2021

I assembly various parts for Mack Trucks and build Mack Trucks on an assembly line. i also custom fit parts using various machines.

Machine Operator

Carpenter Co. - Allentown, PA

July 2017 to August 2017

Operate a saw and i cut product to specs and enter into SAP system. using PLC controlled wire cutting machine.

Welder/Fabricator/Machine Operator/ forklift op

Haberle Steel - Delano, PA

July 2016 to July 2017

FCAW to D1.1 and D1.5 Bridge code, X ray certified. Fit, fabricated and welded various types of parts for bridges. 3G verticle up certified 1inch thickness, 45 degree bevel. Used punch presses, saws, grinders, mag drills and regular drill presses. Used micrometers, tape, dial calipers and bore mics. Welded steel, core ten, aluminum using MIG flux core and MIG hardwire. Forklift Operator and Overhead Crane operator MIG Welder/Fabricator/ Machine operator/forklift op Reading Truck Body LLC - Reading, PA

March 2016 to June 2016

MIG welding truck bodies to print, fabricate parts as needed, MIG welding of galvanized steel and MIG welding of aluminum * Fitting and building truck bodies to print * Use of measuring devices to insure quality * Operated hand trucks, grinders, orbital sanders, various jigs and Flux core welding of steel parts as well * Was also cross trained on multiple lines in multiple departments as well. * Performed new hire training and instructed supervisor of new hire progress. Also performed repair and rework to prevent loss. Overhead crane as well

Supervisor/Head of Security/ Safety Manager/forklift trainer Ashley furniture - Leesport, PA

June 2012 to March 2016

with the Health, Safety and Security office

• Insure trailers get logged in and out with precision as to not lose product

• Protect the company from shrink and loss of various types.

• Run the nurses' station and evaluate and treat injuries

• Observe and record all happenings on my shift, deal with any emergency that may arise

• Insure the safety of all employees when on property; do line checks to make sure EE have proper PPE on and in use.

• Do line audits, riser audits for the sprinkler system, PIV audits, rail audits of warehouse

• Secure facility

• Conduct drug testing on EE as required and fill out workers comp claim forms as needed

• Use AS 400 system, IR index, Microsoft Outlook, various other programs

• Do perimeter checks

• Perform dock door checks

• Help out and work with all departments to insure everyone is safe and performing audits and to make sure we have an open dialogue between HSS and department leads, supervisors, plant superintendents and all employees.

• Schedule all employees

• Instruct employees on proper procedures, train new hires

• Instruct employees on daily activities and verify assigned tasks are being done

• Assign daily tasks and hot spots to watch out for in the plant

• Approved hot work permits, approve confined space entry, approve roof entry

• Assign light duty work and transport light duty employees to assigned areas

• Conduct new hire orientation class presentation

• Create SOP's for department and keep them updated

• Create databases and keep them current

• Make sure the facility is up to date and following current OSHA regulations

• Run the HSS office as Manager when Manager was not available.

• OSHA logs

• OSHA inspections

• Certify Forklift operators and trainer

Welder/ Fabricator/Trainer/Machine Operator/forklift op Reading Truck Body, LLC - Reading, PA

October 2005 to June 2012

MIG welding truck bodies to print, fabricate parts as needed, MIG welding of galvanized steel and MIG welding of aluminum

* Fitting and building truck bodies to print

* Use of measuring devices to insure quality

* Operated hand trucks, grinders, orbital sanders, various jigs and Flux core welding of steel parts as well

* Was also cross trained on multiple lines in multiple departments as well.

* Performed new hire training and instructed supervisor of new hire progress. Also performed repair and rework to prevent loss.

Welder/Fabricator/Machine Operator/forklift op

HTI Inc - Mohnton, PA

October 2004 to February 2005

MIG welding of mild steel for security gates for government contracts

• Fit and fabricate parts for security gates as per government requirements

• Operate drill presses, metal saws, brake presses, grinders and plasma and acetylene torch.

• Forklift operator

Welder and fabricator and Machine operator

Fleetwood Fixtures - Reading, PA

August 2003 to October 2004

Operate metal saw, drill presses, MIG and TIG stainless and mild steels

• Operate various metal finishing machines

• Layout and design store fixtures. Drove box truck for warehouse as well

• Operate milling machine and custom fitting of parts to print specs

• Operate drill presses

• operate finishing machines

General production/ welder/ Machine operator/ Forklift operator Timet - Morgantown, PA

May 2002 to May 2003

Operated rotating fork trucks, overhead cranes, metal shear machines( various styles)

* Sorted titanium by grade

* Welded titanium of various grades for melting operation according to government contracts and blueprint specs

* Operated bobcat

* Operated metal crusher machines

* Operated titanium cutting torch table (240PSI) hi pressure. I was one of only 2 people at facility allowed to cut titanium with diameter of 18 inches +

Machine operator/ ride on pallet jack

DEKA - Blandon, PA

April 2001 to June 2001

Operated raw fill line in building A3

* Maintaining acid levels in tank and checking for gravity for different types of batteries

* Racking battery station, fill station, loading station Machine operator

RV Industries Inc - Honeybrook, Pa

January 2001 to April 2001

grinder/ metal prep

* Operating large sheer

* Layout and minor fabrication

* Grinding parts coming off of plasma table

Machine operator/ welder/ quality control technician/ Production lead/ forklift op

Neapco Inc - Pottstown, PA

March 1996 to January 2001

Operated multi head series large and small drill presses

* Operated multi head boring machine and broach machines

* Operated multi head ring groove machines

* Operated the entire print room for facility

* Operated multi spindle chucker machine( old school version of CNC)

* Operated welding machines for drivelines

* Was a Quality Control Technician for 3 years operating under QS-9000 and ISO-9001

* Also used a multitude of high precision measuring devices including optical comparator

* Also use a magna flux machine to test for cracks in welds and parts coming in from foundry

* Was also fill in lead man on 3rd shift

* trainer for new hires and repair and rework as well

* Hold tight tolerances .001 or less) as per blueprint specs.

* Use of the AS 400 inventory system

* Train new hires and schedule jobs

* Meeting production goals and quotas

Education

None in Industrial Maintenance Mechanic

Reading Area Community College - Reading, PA

2004 to 2005

Skills

• MIG Weld, TIG Weld, Forklift experience, QC experience, Iron worker experience, Computer Microsoft Office proficient, Supervisor, Manager, Human Resource (10+ years)

• Forklift (10+ years)

• Assembly Line (10+ years)

• General Labor (4 years)

• Groundskeeping

• Plasma Cutting (10+ years)

• Calipers (10+ years)

• Precision Measuring Instruments (10+ years)

• Press Brake Machine (2 years)

• Micrometer

• Manufacturing

• Workers' Compensation

• Welding

• Fabrication

• Supervising experience

• Logistics

• Recruiting

• Training & development

• Quality Inspection

• CNC

• Blueprint Reading

• Mechanical Knowledge

• Equipment Repair

• Machining

• Crane

• Bore Gauges

• Calibration

• Stamping Press

• Facilities Maintenance

Certifications and Licenses

Driver's License

Assessments

Supervisory Skills: Motivating & Assessing Employees — Proficient May 2019

Motivating others through feedback to identify improvements or corrective actions. Full results: Proficient

Attention to Detail — Completed

October 2019

Identifying differences in materials, following instructions, and detecting details among distracting information.

Full results: Completed

Indeed Assessments provides skills tests that are not indicative of a license or certification, or continued development in any professional field.

Contact this candidate