Aramco Welding Inspector

CURRICULAM VITAE

Name: Sriramulu Gullapally(Ram)Nationality: Indian Mobile No: +919********* e mail ID: ******@*****.***

Skype ID: ******@*****.***

Professional Certifications:

Certified Welding Inspector Level II from TWI CSWIP 3.1 Certificate number: 87848 Expiry 02nd May 2024

Expiry 28th May

ASNT NDT Level II UT, RT, MPT, VT, and PT 2024

Intertek IRCAcertified ISO9001:2015 Auditor/Lead auditor (Quality Management System)

OPTIO APPROVED BOSIET

ARAMCO CBT passed

Academic Qualifications:

Bachelor of Science from Kakatiya University, Warangal, Andhra Pradesh, India. Postgraduate Diploma in computer Applications from Orbit Hyderabad

SUMMERY OF EXPERIENCE:

Certified QC inspector with over TEN years progressive work experience within Inspection, Successfully contribute within the scope of quality assurance & control, inspection, site supervision and technical documentation.

Inspection Activities; activities performed as QA/QC Inspector in accordance with the Quality Assurance Plan (QAP), Quality Management Plan (QMP), Inspection Test Plan (ITP), Original Equipment Manufacturer (OEM) requirements

ADDITIONAL SKILLS

Computer Literate in Windows 98, 2000 and Office 97, 2000.Holding Valid Indian, Australian Driving Licenses.

Work Experience

SAIPEM (SNAMPROGETTI) Saudi Arabia

As QC Welding Inspector From May 2018 to Oct 2020

Client: Saudi Aramco (Maintain Potential Facilities Offshore LTA2 Project)

Preparation of QA/QC documents like WPS, ITP, and QCP in

Accordance With project specifications And Applicable codes and International standardslike ASME, AWS.

Involved in various welding process like SMAW, GTAW, GMAW, SAW with Saipem welding system (Downhill) and passo (Downhill) welding for Pipeline welding.

Qualifying the welders to various welding process as per applicable Code.

Welding consumables inspection and conducting tests as per code.

In process and post welding inspection by using correct approved Procedures and welders and verification of pre- heat, heat input by Following welding parameters.

Conducting & Witnessing Ultrasonic testing and penetrant testing.

Review of radiography films.

Co-ordinationwithclient andsub-ordinates, Preparation of Inspectionreports.

Experience in working CS, SS, INCONEL, 6MOLY, Duplex and CuNi material.

Witnessing PWHT.

Consolidated Contractors, Saudi Arabia As QC Welding Inspector

From Feb 2018 to May 2018

Client: Saudi Aramco (Sulphur Recovery Unit Project, JAZAN TERMINAL REFINERY)

Preparation of QA/QC documents in accordance with project specifications.

Identification of various types of materials like C.S, S.S, Low alloy And Incolonel, WPS updating in the Isometric drawings.

Inspected various welding process like SMAW GTAW, FCAW

Witnessing for Qualifying WPS and welders to various welding Processes.

Pre-weld inspection and verification of pre- heat and welding Parameters.

Welding inspection of various materials like CS, LTCS, SS, P 11 P22,Incoloy,inconal before during and after welding.

Welding consumables inspection, WPS updating in the Isometric Drawings.

Witnessing the dye penetrant testing and magnet particle Testing.

Co-ordination with client, sub-ordinates & Preparing the Inspection reports.

BR C.A.T International, Dammam, Saudi Arabia As QC Welding Inspector

From Nov 2014 to July 2017

Client : Saudi Aramco (KHUFF GAS and MAINTAIN POTENTIAL Projects)

Review of WPS, Welder qualification Tests according to ASME SEC IX, API 1104.

Pre, In process, Final Visual inspection of Carbon Steel, Stainless Steel and Dissimilar welding using SMAW,GMAW,GTAW and SAW processes.

Verifying Instrument Calibration records.

On plot piping, flow lines according to ASME B31.4 and ASME B31.8.

Temperature Tie-in welds, repair procedures.

Piping in Remote headers.

Completing the inspection checklists submitting daily weld reports.

Preparing NDT requests according to project requirements.

Review of IFC Drawings, preparing weld maps.

Preparing and Submitting NCR as required.

ACE Inspection and Training Services, Hyderabad, India. As QC Inspector

From Nov 2013 to Oct 2014

Client : Orissa Thermal Power Project.

Inspects and tests welded joints of work in progress and of completed units for visible defects, weld penetration, and conformance with layout, blueprint, and work order specifications.

Prepare the documents for the QC activities and . Updating all QC activities and prepare the Test packages status and Progress reports.

Monitoring the step by step fabrication work in progress at the workshop and assembly of the industrial valves along with its auxiliaries as per design, codes and standard.

Prepare QA/QC documents, site quality plans, inspection & test plan, work procedures etc.

Identify to the site quality control coordination any related concerns or deviation. Quality check on the material and installation as per the Quality specs/manual and client quality standards and requirements.

Review Radiography films for welds and witness UT, MT & PT as per job Requirement.

Prepare QA/QC documents, site quality plans, inspection & test plan, work procedures

Visual inspection of material storage and handling.

Gippsland NDT Services Pty Ltd, Victoria, Australia. As QC Supervisor

From May 09 to Oct 13

Client : AGL Energy

Managing and coordinating the daily inspection activities, ensures that contractor follows the approved ITP and project specifications.

Review of contractor’ s procedures related to quality, management of NCR Preparation of weekly/monthly inspection reports, NCR status, audit/approval of vendors. Supports quality control at vendor/supplier during procurement

activities.

Ensures quality records are properly maintained, interface with PMT and inspectors to deal with specific issues.

Provide feedback to the PMT with reasons on contractor/supplier quality control performance.

Awareness of inspectors relevant project requirements related to quality.

Oil Country Tubular Limited, Hyderabad, INDIA . As QA/QC Inspector

From Dec 05 to Jan 07.

Clients: ONGC, GAIL GSPC, Halliburton, Schlumberger, Weatherford,

Clarifications, Fulfillment of requirement as per the Approved Drawings, Code/Standards and project specifications. Inspection of piping, Vessels and Heavy Structural at stages as per approved Inspection and Test Plan (ITP).

Qualification and Review of WPS, PQR, WPQR as per Reference Codes of ASME Sec IX & AWS D 1.1. Raw Material inspection and material Identification for the Heat Number verification. Stage inspection as per approved ITP.

Welding Inspection, Pre/Post heating, Post Weld Heat Treatment, NDT inspection of Witness and Report Review, Hardness verification as per Code/

Standards.

Project Specifications & Witness and Report Review of positive Material Identification.

Inspection of Fabrication and welding of the piping system as per shop and field welding

Responsible for various inspection and Expediting Services for Heavy Fabrication, pipelines and machining components for various Plants.

Verifying calibration records for testing and inspection equipments.

Document, Data Control, Record Maintenance, Document Updating, Report Preparation, Project Monitoring, Coordination with Contractor and Subcontractor .

Permanent address: 92 B

Housing Board Colony,

Adilabad, Telangana, India pin 504001

Declaration

I hereby by declare that the information furnished above is true to the best of my knowledge..

(SriramuluGullapally)

Contact this candidate