Electrical Engineer Electronics

Robert Daniel Kolacki

Electrical Electronics Software Engineer

November 3, 2022

**********@*****.*** ******.*.*******@****.*** 619-***-**** https://www.linkedin.com/in/robert-kolacki-401aa221/ Top Secret SCI CI Poly Clearance Fully vaccination against COVID-19 with Pfizer Experience:

Electrical Engineer 1964 - Present

SAIC August 2021 – present

Electronics Engineer – Program Analyst Acquisition Specialist, Software Engineer. Agile acquisition, MBSE - Model Based Systems Engineering, Scaled Agile Framework

(SAFe), Data Analysis, Signal Processing, Reverse Software Engineering, … Supported the Intelligence Community. NRO National Reconnaissance Office, NGA National Geospatial-Intelligence Agency, DIA Defense Intelligence Agency, …

Serco NA Washington DC January 2021- August 2021

Electronics Engineer - Test and Evaluation (T&E) Management Lead in Washington, DC. Supported NAVSEA PMS 377. T&E Division Head - supervised team of ten. Provided overall T&E management support across amphibious warships and landing craft. SAIC / Engility San Diego 2018 – January 2021

Electronics Engineer - Supported PEO C4I PMW 120 on Remote Sensing Capability Development (RSCD). Supported Spectral, the Navy’s Next Generation Information Warfare system. Acquisition, Test & Evaluation (T&E), TEMP, requirements, architecture, cyber security, networks, R&ME, MBSE. Certified Scaled Agile Framework (SAFe)® 5 Practitioner. Supported NAVSEA PMS 515 client -T&E FFG(X) > FFG-62 Frigate Shipbuilding Program NAVWAR / SPAWARSYSCOM

San Diego / Crystal City 1981-2017 retired

Electronics Engineer (Federal Job DP-04 GS-15) Office of the Chief Engineer. SPAWAR HQ 59000 Mission Assurance – Test and Certification Engineering. T&E, R&ME, CM, and Standards SME.

Westinghouse Electronic Systems Defense / Northrop Grumman Baltimore Maryland 1968-1981

Senior Electronics Engineer C4I Software Hardware Design, Development, Integration. Electronic Warfare Airborne Space Underwater Systems Radar Signal Image processing. Education: MSEE George Washington University 1979 Electrical Engineering MBA Loyola University Baltimore 1974 Finance, Accounting BSEE Cornell University Ithaca, NY 1968 Electrical Engineering DAWIA T&E Level III 2001, Program Management III 1992, and Engineering III 1998 COMOPTEVFOR Operational Test Director (OTD) Course Certificate 2021 Maryvale High School Cheektowaga NY Student Council President, Regents Scholar Detailed

Experience:

Electrical Engineer 1964 - Present

SAIC August 2021 – present

Electronics Engineer – Program Analyst Acquisition Specialist, Software Engineer. Agile acquisition, MBSE - Model Based Systems Engineering, Scaled Agile Framework

(SAFe), Data Analysis, Signal Processing, Reverse Software Engineering, Software Development, …

Supported the Intelligence Community. ISPO - Integrated Systems Program Office. NRO National Reconnaissance Office,

NGA National Geospatial-Intelligence Agency,

DIA Defense Intelligence Agency,

IARPA Intelligence Advanced Research Projects Activity Apply technical comprehension of current OPIR - Overhead Persistent Infrared system status, development, and issues to develop graphic presentations. Applied technical comprehension of current OPIR system status, development, and issues to develop graphic presentations.

Supported coordination for system validation of OPIR systems. Provided subject matter technical expertise of OPIR and OPIR systems to the ISPO, OPIR stakeholders and capability providers to ensure delivered systems meet operational, integration, and interoperability requirements.

Coordinated directly with ISPO, Operational OPIR leadership and users to ensure successful integration of ground resources (e. g., WIDOW, RTS, ODB, PDT), collection operations resources (e. g., PGMM, GSB, COAT, GIMS), etc. into the NSG framework. Leveraged Systems Engineering and MBSE experiences to support the Customer. Provided an organized repeatable system engineering approach that enabled architectural elements usage with a model and sharing between model development projects Worked with enterprise systems engineering and other programs in gathering, documenting, and sharing systems engineering lessons learned throughout the program Worked across multiple organizations supporting the identification and definition of future needs. Generate products using MBSE tools to support reviews and analysis Applying Agile methodologies. Developed and completed daily tasks. Prepared briefings for senior decision makers.

Generated programming design documents, coding standards, collaborated with teams to gather requirements, and developing flow charts, integration diagrams, and data flows. Experience in modeling tools (Cameo) and modeling frameworks (UAF - Unified Architecture Framework, DoDAF, MODAF- British Ministry of Defence Architecture Framework and languages ((SysML - Systems Modeling Language, UML - Unified_Modeling_Language, MOF).

Supported Program Office (PO) space systems ground segment acquisitions and related Operations & Maintenance (O&M).

Risk Management; Project schedule management; and Technical evaluations of proposals. Reverse Software Engineering

Focused on isolating, reviewing, analyzing, and reverse-engineering malicious binaries to determine functionality and capability,

Serco NA Washington DC January 2021 – August 2021

Electronics Engineer - Test and Evaluation (T&E) Management Lead in Washington, DC. Supported NAVSEA PMS 377 client. Directly supervise team of ten. Provided overall T&E management support across amphibious warships and landing craft. Evaluated, recommended, and implemented test strategies to support new construction and post-delivery T&E.

Developed and implemented procedures for product testing, reviewing, and evaluating test results, and recommended production or design changes to ensure quality and performance standards.

COMOPTEVFOR Operational Test Director (OTD) Couse Certificate SAIC / Engility 2018 – 2021 (SAIC acquired Engility 15 Jan 2019) Electronics Systems Networks Engineer

Systems Engineering Technical Assistance (SETA) supported PEO C4I PMW 120 The Battlespace Awareness and Information Operations Program Office client on Remote Sensing Capability Development (RSCD) project and Spectral, the Navy’s Next Generation Information Warfare system.

Cleared for Top Secret Information and granted access to Sensitive Compartmented Information based on Tier 5 Investigation completed 20 March 2020. Used Jira, Rational DOORS and Scaled Agile Framework (SAFe) methodology, creating transparency and increasing velocity over time.

Certified SAFe® 5 Practitioner

Supported NAVSEA PMS 515 PEO-Unmanned-and-Small-Combatants client

• Developed architecture and T&E for FFG(X) > FG-62 Frigate Shipbuilding Program.

• Provided engineering and design activities to support complex decision-making issues.

• Reviewed engineering drawings and recommending system configuration changes.

• Coordinated with NAVSEA and NAVWAR technical Points of Contact on design requirements and Test & Evaluation.

• Contributed to the development and coordination of

-Test & Evaluation Master Plans (TEMPs)

-Reliability, Maintainability, Availability, and Cost Program Plan (RMAC-PP)

-Post Delivery Test and Trials (PDT&T)

-COTF Operational Test Director’s (OTD) Manual 3 May 2019 vs 18 July 2017 impact of COMOPTEVFORINST 3980.2I revisions on FFG(X)

-Cost Analysis Requirements Description (CARD)

• Implemented Pre-Shipyard Developmental Test (DT) and Integration strategy

-Supported integration and validation of Non-Developmental Item (NDI) systems prior to shipyard installation.

-Applied Integrated Stage Testing approach to systems, pre-delivery to shipyard.

-Evaluation of Survivability & Cybersecurity.

-Leveraged Secret Defense Research and Engineering Network (SDREN) connectivity to connect existing developers’ facilities into a virtual Land-Based Test Site (LBTS).

-Leveraged already planned Systems Engineering Development Site (CSEDS) Advanced Capability Build (ACB) testing for functionality common with FFG(X) Combat Management System (CMS) implementation.

-Constellation-class frigate FFG(X) - added specific tests to already planned radar testing at Wallops Island.

-Planned for cybersecurity controls tests in conjunction with systems and Frigate Architecture Framework (FAF) elements using USS Dahlgren and/or National Cyber Range capabilities.

• Collected, analyzed, and evaluated data to provide a basis for assumptions, methodologies, and estimates.

• Translating functional and technical requirements into design concepts and providing detailed design inputs to system requirements, specifications, and drawings.

• Reviewing system design documentation for compliance with applicable requirements, NAVSEA and NAVWAR instructions, and statutory and regulatory policies. Requirements Analysis, Architecture, Specifications, Standards, …

• Modeling and Simulation

• Model Based Systems Engineering (MBSE) – MagicDraw, Microsoft Visio, … Program Management - Microsoft Project

• Participating Acquisition Resource Managers (PARMs) reviews Engineering Development

• Command, Control, Communications, Computer, Intelligence, Surveillance, and Reconnaissance (C4ISR) Systems - PEO C4I

• Combat Systems

• Consolidated Afloat Networks and Enterprise Services (CANES)

• Exterior Communication System (EXCOM)

• Interior Communication System (ICOM)

• Navigation Systems (NAV)

• GPS-based Positioning, Navigation, and Timing Service (GPNTS)

• Global Command and Control System – Maritime (GCCS-M) Systems Evaluation

• Risks – Technical, Architecture, RMF, Performance, Schedule, Cost, … System of Systems (SoS) Architecture Framework and Implementation.

• Maintaining Frigate Architecture Framework (FAF) Engineering Action Item Tracker

• Developing SV-2 and DIV-3 Cyber Isolation views

System Engineering Test and Evaluation (T&E)

• Evaluating “testability” - capability to test emerging cyber security threats Supporting development and review of acquisition and program management documents

• Statement of Work (SOW)

• Request for Proposal (RFP)

• Post Delivery Test & Trials (PDT&T) Plan

• Contract Data Requirements List (CDRL)

• Test Index (TI), Test Sequence Network (TSN), Test Documentation Book (TDB)

• Test Plans, DoD-STD-2106 compliant Test Procedures Providing engineering guidance and analysis of network infrastructure

• switches, routers, servers, firewalls

• design, validation, documentation, procurement, and testing

• hardware & software, implementation, tools, and Implementation

• Quality of Service (QoS) – latency

Cyber Security

Researching, recommending, and reporting results.

Effectively communicate with team members, customer, and external vendors. Space & Naval Warfare Systems Command (SPAWARSYSCOM) HQ - changed name to Naval Information Warfare Systems Command (NAVWARSYSCOM) 3_June_2019

San Diego California, Arlington Virginia 1981-2017 retired Electronics Engineer (Federal Job DP-04 GS-15) Office of the Chief Engineer. SPAWAR HQ 59000 Mission Assurance – Test and Certification Engineering. Reliability and Maintainability Engineering (R&ME), T&E, CM, and Standards POC.

• Systems Engineering Technical Review (SETR) Subject-Matter Expert (SME). Standards, Handbooks, Instructions and reports editor. SCN Shipbuilding and Conversion, C4ISR T&E Director. NAVSEA Liaison.

• Led T&E of C4ISR systems on CVN-76 and LPD-17 class ships.

-Outstanding Performance Award for T&E and on time delivery of CVN-76 C4ISR systems prior to christening in 2001.

• Edited and coordinated TEMPs, SOVTs, and FRCB documents. Cybersecurity Engineer – Threat Monitoring – Project Management – Web Portal Development

DARPA Strategic Computing Network Security, Program Manager COR. Software Technology for Adaptable, Reliable Systems (STARS) Applications Manager. National Center for Supercomputing Applications (NCSA). NSA National Computer Security Center Navy Liaison. Program Manager, COR IDES Intrusion Detection Expert System – SRI, DARPA, SPAWAR, NSA, FBI OSD/SPAWAR rep on Space Shuttle Evaluation Team.

Naval Air Systems Command (NAVAIR) HQ

Crystal City Arlington Virginia 1983-1984

Electronics Engineer (Federal Job)

NAVAIR 546 Computer Resources and Systems Avionics Architecture Division. Lead for V-22 Osprey, F-18, F-14, EA-6B, AV-8B, E-2C, P3, JTIDS, GPS Naval Electronics Systems Command (NAVELEX) HQ

Crystal City Arlington Virginia 1981-1983

Electronics Engineer (Federal Job)

PME 107 Reconnaissance, Electronic Warfare, Special Operations & Naval Intelligence Systems (REWSON), Submarine Electronic Support Measures, Tactical Cryptologic Systems Project Management from conception to support.

Westinghouse Electronic Systems Defense / Northrop Grumman Baltimore Maryland 1968-1981

Senior Electronics Engineer C4I Software Hardware Design, Development, Integration. Electronic Warfare Airborne Space Underwater Systems Radar Signal and Image processing. National Security Agency, Fort Meade Maryland 1980 Electronics Engineer (Federal Job) Digital Signal Processing, Database Management. Federal Energy Regulatory Commission (FERC) HQ Washington DC 1971 Electrical Engineer (Federal Job) Rates and Regulations, Reliability and Maintainability Engineering (R&ME).

Sylvania / GTE Research Lab Amherst NY while student at Cornell University Senior Technician T&E of Light Observation Helicopter communications. Reliability and Maintainability Engineering (R&ME)

• Subject Matter Expert (SME)

• Initiated SPAWAR Systems Engineering Technical Review (SETR) R&ME area.

• Reliability growth, design of experiments (DOE), testability.

• FMEA/FMECA, mean time between failure and repair.

• DoD assigned SPAWARSYSCOM lead for R&ME standards - Kolacki POC.

• R&ME the signature engineering function of SPAWAR Chief Engineer. Test & Evaluation (T&E)

• Subject Matter Expert (SME)

• SCN Shipbuilding and Conversion, Navy C4I Test & Evaluator Director. Led development of DoD-STD-2106 Test Procedures for CVN-76 and LPD-17 class.

• Analyzed documents in the context of mission performance, safety, health hazard, operational effectiveness, operational suitability, and survivability supporting the installation and integration of command, control, communications, computers, intelligence and surveillance (C4ISR) programs.

• Monitored and reviewed the developmental test and evaluation activities of major DoD space and missile defense acquisition programs

• Performed independent assessments of T&E planning, performance, interoperability, reliability, and cybersecurity to support key program decisions and major milestones

• Test Readiness Reviews (TRRs)

Assessed system integration testing adequacy, planning, objectives, methods and procedures.

• Worked in team and individual environments; detailed oriented; strong written and verbal communication skills; effective technical presentation skills. Edited Standards, Handbooks, & Instructions.

• MIL-HDBK-781 Reliability Test Methods for Engineering

• MIL-HDBK-245 SOW Preparation

• Test & Evaluation Master Plans (TEMPs)

• System Operational Verification Tests (SOVTs)

• SPAWAR Integrated Data Environment and Repository (SPIDER)

• C4I Interactive Test Procedures (ITP)

• Fleet Readiness Certification Board (FRCB) documents

• Coordinated with DoD, SECNAV, PMW’s, and SPAWAR

Rapid development and demonstrations of systems in maritime environments.

• System capabilities included: autonomy, navigation, information assurance, sensor performance, data relay, and communications with platforms and payloads

• Deliverables included: Integrated T&E plans, procedures, schedules, description of the components and subsystems, status, and presentation material.

• Rapid Acquisition Process (RAP)

As Marketing Manager, demonstrated ability to engage effectively with senior government executives, program managers and contractors.

Provided cross-System Command (SYSCOM) coordination of R&ME and T&E for platform Interoperability and Integration (I&I), and Technical Warrant Holder (TWH) engagements.

Provided SPAWAR 5.0 formal document reviews assigned by the Document Review Service Process, SPAWAR 5.0 Chief-of-Staff Action Item Tasker, or Technical Authority Process.

Supported compliance to applicable C4ISR Standards, and develop technical risk assessments for all Non-Compliances in coordination with product Assistant Program Managers Engineering (APM-E) APM- Es, Technical Area Experts (TAEs), Technical Process Owners (TPOs), and related TWHs.

Supported technical recommendations for Systems Engineering Requests. Reviewed Engineering Change Proposals (ECP) and Requests for Deviation (RFD). Reviewed Component First Article Test (CFAT) plans and reports. Supported production and quality teams, including assembly, test, PPAP, and CFAT. Supported test activities and work to bring issues to final resolution. Supported reporting of cross-platform technical issues to SPAWAR Chief Engineer. Provided Engineering competency support.

Worked with Baseline Managers to consolidate C4I Certification baselines. Supported TWH analysis and inputs to PEO C4I and/or Warfare Systems Certification Decisions (WSCDs).

Collected and analyzed required Objective Quality Evidence (OQE) for development of baselines and risk assessments in support of Group and Unit- level Warfare Systems Installation Authorization (WSIAs) and WSCDs.

Supported SharePoint site content to include certification deliverables, C4I Element Certification status, and other objective quality evidence (OQE), Performed Systems Engineering activities including concept of operations formulation, requirements definition, analysis and engineering, system architecting, system analysis and design, interface and data architectures, validation and verification, systems integration, system and operational performance analysis, Lifecycle cost analysis & estimation, decision analysis and physical configuration analysis (PCA). Performed functional analysis, detail trade studies, requirements allocation and interface definition studies to translate requirements into hardware and software or engineering specifications.

Provided information for selection, implementation techniques, and tools for the most efficient solution to meet business needs, including present and future capacity requirements. Demonstrated application of advanced technical principles, theories, and concepts. Ensured designs fully support requirements and are consistent with customer budget, schedule, risk profile and organizational/system constraints. Served as a technical advisor responsible for a broad program involving development, budgeting, scheduling, project management, and installation of systems. Performed in a lead role for engineers involved in the development, testing, integration, and sustainment of specialized and diverse software, electronic, and/or mechanical equipment and systems. Determined test objectives, instrumentation, and data requirements; writes test planning documents; schedules program activities; tracks funding and expenditures; plans and conducts test missions; analyzes resultant data; and documents results in test reports, statistical evaluations, and briefing presentations.

Coordinated with at all levels; acted as liaison for test activities, design reviews, and technical working group meetings to comply with requirements and specifications. Coordinated with other engineering, logistics, financial, and program management disciplines to define system specifications and requirements.

Verified and complied with engineering documentation standards and test procedures. Evaluated engineering proposals and provides comments on the technical content and level of effort of the proposed scope of work.

Maintained technical responsibility for assigned tasks and advises management of progress in support of the technical and administrative direction of project operations. Analyzed engineering problems, proposes solutions and alternatives, and provided recommendations.

Developed and implemented technical and administrative operating policies and procedures. Applied knowledge of the systems engineering discipline across one or more components of the system development life cycle (SDLC), including concept development, technical planning, requirements development, system analysis, system design, integration, verification, transition, operations, obsolescence, and disposal. Participated in program integrated product teams (IPTs) and promoted the proper application of systems engineering processes. Exhibited experience with the systems engineering (SE) process for system acquisitions, including systems engineering plans, system engineering technical reviews (SETRs), system certification processes, and specialty engineering activities. Planed integration and test events and reported verification results. Analyzed test plans and participated in test readiness reviews. Wrote test reports and supported the requirements verification process using the DOORS. Supported plan and design of system level tests along with the test procedures. Reviewed system test reports with all the stakeholders before integration. Participated in technical readiness and issue/risk identification discussions prior to integration. Developed metrics and performed analysis to ascertain needed changes or modifications to engineering methods, procedures, and/or approaches. Provided MILCON Program Management and Engineering Support. Performed multidisciplinary professional engineering work involving the application of electronics, mechanical, aerospace, and/or other engineering disciplines to determine the business and technical needs of stakeholders in the acquisition, development, or sustainment of weapon systems, sub-systems, support systems, equipment items, or an equivalent product. Coordinated the various phases of work with other functional disciplines and interpreted/translated engineering requirements into design characteristics and criteria. Prepared, reviewed, and updated required program documentation. Identified, analyzed, and resolved problems which could impact project success. Developed metrics and performed analysis to ascertain needed changes or modifications to engineering methods, procedures, and/or approaches. Software Engineering Application Development

• Evaluated network infrastructure security T&E tools for IPv4 and IPv6 environments.

• Derived requirements for inclusion and display in web-based user interfaces.

• Performed gap analysis for network device collection and analysis.

• Collaborated with analysts and developers to understand data use patterns and techniques in order to derive appropriate implementations and optimizations for new and existing data sources an translate those uses into useable cloud-based features. Information Sharing - Web Portal Development

• Developed and maintained Knowledge Management (KM) using Wikis, Blogging, and Web. Developed metrics and performed analysis to ascertain needed changes or modifications to engineering methods, procedures, and/or approaches. Software Engineering Application Development

• Evaluated network infrastructure security T&E tools for IPv4 and IPv6 environments.

• Derived requirements for inclusion and display in web-based user interfaces.

• Performed gap analysis for network device collection and analysis.

• Collaborated with analysts and developers to understand data use patterns and techniques in order to derive appropriate implementations and optimizations for new and existing data sources an translate those uses into useable cloud-based features. Commercial off The Shelf (COTS) integration security

• Identified security vulnerabilities.

Security Incident Event Management (SIEM)

• Provided real-time analysis of security alerts generated by applications and network hardware.

Cybersecurity Engineering - Threat Monitoring - Project Management

• Analyzed high risk cybersecurity incidents working in conjunction with response partners.

• Maintained an awareness of advancements in technologies and processes.

• Maintained an awareness of anomalous or malicious activity.

• Promoted adoption of standards and guidelines.

• Provided advice and assistance with implementation of standards, guidelines, and best practices.

• Performed compliance scanning to analyze configurations and compare to established baselines.

• Demonstrated knowledge of Risk and Project Management concepts.

• Analyzed applications and communicated risks to stakeholders in a consultative manner,

• Developed Cross Domain Solutions

• Designed and implemented secure network solutions Knowledge of networking (TCP/IP, topology, sockets and security), operating systems

(Windows/UNIX/Linux), and web technologies (Internet security) Knowledge of Information Assurance and Information Operations technologies and development activities .Knowledge of software development and systems development lifecycle practices.

Understanding of operating systems.

Experience working with teams in an agile development environment. SCN Shipbuilding and Conversion, Navy

• Led T&E of Command, Control, Communications, Computers, Intelligence, Surveillance and Reconnaissance (C4ISR) systems on CVN-76 and LPD-17 and class.

• Model Based Systems Engineering (MBSE) best practice.

-Tested and validated system characteristics early in the acquisition process.

-Facilitated timely learning of properties and behaviors, enabling fast feedback on requirements and design decisions.

-Provided feedback sooner and more cost-effectively than implementation alone

-Translated functional and technical requirements into design concepts and provide detailed design inputs to system requirements, specifications, and drawings.

• Reviewed system design documentation for compliance with applicable requirements, NAVSEA and SPAWAR instructions, and statutory and regulatory policies.

• Presented recommendations for requirements applicability and design changes in the form of Analysis of Alternatives (AoA), White Papers, and visual presentations.

• Supported development and presentation of system of systems (SoS) architecture recommendations.

• Analyzed using Department of Defense Architecture Framework (DoDAF) products.

• Identified capability gaps and mission needs.

• Tutorials, presentations, modeling, collaboration, and mentoring.

-MagicDraw

-Microsoft Visio

• Characterized requirements and behavior of systems.

• Demonstrated proficiency with Microsoft Suite.

Fleet Readiness Certification Board (FRCB)

• Facilitated the FRCB process by participating in FRCB submissions

• Provided technical and process level feedback to facilitate review quality and efficiency.

• Identified risks according to the Shore Installation Handbook (SIPH) and FRCB process guides.

• Accessed SPAWAR PEO Integrated Data Environment and Repository (SPIDER).

• Coordinated with Product/Platform PMWs, FRD Installation Management Offices (FIO) PAC/LANT.

• Project Engineers and Regional Shore Installation Managers (RSIMs). Systems Engineering Technical Review (SETR)

• As a senior member and Subject-Matter Expert (SME) on the SPAWAR HQ Systems Engineering SETR Team, provided engineering expertise across the SPAWAR product line.

• Provided program management with independent subject matter assessments of program technical health and maturity at key points in the development life cycle.

• Developed SPAWAR R&ME SETR checklists based on IEEE 15288.2, “IEEE Standard for Technical Reviews and Audits on Defense Programs.”

• Evaluated the progress of the technical development portion of system acquisition.

• Collaborated with NAVSEA and NAVAIR SETR POCs on systems of systems (SoS) integration using common processes, software tools and terminology with focus on the following:

-Reliability and Maintainability Engineering (R&ME)

-System Requirements

-Traceability and Design

-Test, Evaluation, and Certification

-Architecture

-Configuration Management

-Documentation

-Training, tutorials, presentations, modeling – MagicDraw, Microsoft Visio

• Applied Model Based Systems Engineering (MBSE) best practices to SETR

-Focused on R&ME.

-Increased resiliency, flexibility, interoperability, cybersecurity, data integrity.

-Reduced time, cost and risk to develop, deliver and sustain systems.

-Applied object-oriented systems engineering methods. Test & Evaluation Master Plans (TEMPs)

• Advised on TEMP development and analysis.

SPAWAR 5.0 ISEA representative - voting Board Member SPAWAR Liaison to OSD, DASN, DON, NSA

SPAWAR Lead on DON T&E Workforce Competency (WC) IPT

• Implemented "to be" goals and objectives and provided a quarterly forum and regular communication between SYSCOMs and DASN(RDT&E) T&E Office on workforce issues.

• Supported the yearly DON DT&E Self-Assessment Report and provided field activity feed- back to DOD T&E Function IPT (FIPT) and DON Acquisition Career Field Council (ACC) initiatives.

SPAWAR Representative to Navy T&E BOD Working Group. SPAWAR POC for DON DT&E Self-Assessment Reports to Congress. ERP (Enterprise Resource Planning)

• SPAWAR HQ/PEO Site Training Coordinator.

Navy IPv6 Transition Project Office

• Provided Navy inputs to “DoD IPv6 TE Congressional Report”

• IPv6 Lab Integration - Contracting Officer's Representative (COR)

• Developed acquisition packages

• Evaluated proposals

• Managed contracts

Certification and Accreditation SPAWAR HQ 5.0

• Certification, Systems Implementation and Engineering Support (CSIES)

• Information Assurance Cybersecurity

• SeaPort Contract Task Order Manager (TOM)

Architecture Systems Open

• Architecture/FORCEnet Experimentation and Alignment Copernicus Systems Engineering Architecture Task Leader

• Coordinated with SPAWAR HQ Chief Engineer, OPNAV, and Admiral Cebrowski Lean Six Sigma Champion/Sponsor

• Moved Cybersecurity Certification

Contact this candidate