Network Technician Sales Associate

Jerald C. Burks

**** **. ****** *****, **** Park, CA 90043

email: *.*.*****.****@*****.***

phone: 415-***-****

WORK EXPERIENCE – WORK HISTORY

*/**** – 11/2021 Teledyne Tech. –Controls, El Segundo, CA

Repair Electronics Technician

+ Evaluate/ Test/ Repair flight data recorders, LRU’s ( Line

Replaceable Units that are the IDMU’s (Integrated Data

Management Unit) and the FDAS ( Flight Data Acquisition Systems)

equipment that record and store data reported, accumulated and

processed by the various onboard information systems of aviation

vehicles.

3/2019 – 5/2021 ONTIC – BBA Aviation USA, Chatsworth, CA

Overhaul Repair Electronics Technician

+ Evaluate/ Overhaul/ Repair aviation/ navigation EHSC equipment

(EnHanced Situation and Condition) Displays and computerized

monitoring systems (i.e. 80-5205-XX, 80-5183-XX, 80-5184-XX and

80-5181-XX, and 80-5185-XX) used in various aircraft – Boeing,

Lockheed-Martin, Northrop-Grumman etc.

+ Evaluate/ Overhaul/ Repair electronic fuel monitoring systems

including inverters, fuel probes (0212KTU-XX) fuel pump monitoring

systems of commercial and military aircraft – American Airlines,

United Airlines, Virgin Airlines (U.K.) and military Contractors;

Boeing, Lockheed-Martin, Northrop-Grumman etc.

+ Evaluate/ Overhaul/ Repair electronic/ electrical systems such as

the DCU’s, Contact/ Starters and status monitoring systems for

APU’s (Auxiliary Power Units),

+ Solder/ desolder electronic through-hole components (diodes,

capacitors, inductors, power-fets, trim pots resistors, inductors)

switches as well as SMT- 0402 components on PCB’s

and modules tested on-site before being deployed to

the field at the operating air transport hubs, air freight and

passenger planes, internationally.

7/2018 – 11/2018 NASA-JPL/ Transpacific Technologies, Pasadena, CA

Electronics Electromechanical Technician

+ Instructed by and worked with NASA-JPL’s Antenna Construction

and Structural Engineers in modifying, updating and effecting

revision changes of drawings, BOM kits and guidelines specifying

the building and constructing junction boxes/control panels and their

RF/ Microwave signal routing systems; electrical wiring, cable

harnessing specific to RF frequency and signal processing.

+ Construct, build, assemble and modify RF/ Microwave systems; RF

and MICROWAVE GUIDES, SPLITTERS and CONDENSERS and

their mounting support structures that are shipped to, installed and

maintained at the DSN’s – the global Deep Space Networks

locations at Goldstone Mojave - U.S.A., Madrid, Spain and at

Canberra, Australia.

+ Test RF/ Microwave Telescope and Telemetry systems and wave

guides, using signal generators, conditioned and phased power

supplies. Using dedicated oscilloscopes, discrete probes and

calibrated and tuned frequency analyzers gauging RF-Microwave

SIGNAL STRENGTH and/or POWER LOSS, “LEAKAGE” from the

LNA through to signal/power amplifiers and the signal paths through

the connecting junctions and the joining waveguides.

+ Installed signal conversion units that utilized fiber optic breakout

and transmission portals enabling remote processing and control of

LNA and antenna systems.

+ Modify, repair and rework of the electronics and wiring systems

comprising the LNA’s (Low Noise Amplifiers) in the antenna

emitter/receiver arrays. As well as assisting in a certified level

3 clean room building and micro soldering (gold based solder)

under powered microscopes transistor based and gated signal

amplifiers printed on wafers .

+ Documented all work and modifications performed according to

work instructions set by the designing and originating Engineers.

+ Coordinated with outside Contractors and Vendors in procuring

material, equipment, electronic/ electrical components needed for

fabrications, production, repairs and the laboratories.

+ Performed daily work floor and shop maintenance in accounting for

tools, instruments and electronic devices used in assembling,

building, constructing and testing LNA/ Antenna systems

+ Solder/ desolder electronic through-hole components (diodes,

capacitors, inductors, power-fets, trim pots resistors, inductors)

switches as well as SMT- 0402 components on PCB’s

and LNA modules tested on-site before being deployed to

the field at the operating DSN’s.

4/2018 – 7/2018 AEROSPACE CORPORATION/ Chipton- Ross,

El Segundo, CA

Metrology Technician

+ Coordinated calibration services for the Customers and departments

of Los Angeles Air Force Base

+ Received mechanical equipment, torque tools, measuring devices,

and electronic meters all work and modifications for the purpose of

calibrating to optimal performance and/or verify accuracy using in-

house standards.

+ Arranged calibration services (shipping to and return from

Calibration Sources) for equipment, electronic tools, sensor devices

and laser based equipment that Aerospace Corp. had no in-house

standards for.

+ Maintained Customer/Equipment histories, calibration records

and schedules for the Customers of Los Angeles Air Force Base.

+ Documented and verified all work, certifications, re-certifications and

standards used or performed to calibrate equipment, tools, devices

and sensors.

9/2017 – 3/2018 SPACEX / Engineering Technical Group (ETG),

Hawthorne, CA

Electronics Electromechanical Technician

+ Collaborated with SPACEX’s Senior Production Engineers in

modifying production processes and updating revision changes used

as guidelines for quality assurance standards for future

manufacturing.

+ Construct, build and fabricate the PCBA soldering fixtures for the

Selective Solder Line Production, fabricated cables and harnesses

for the computer interfaces to be used in testing the performance of

FLIGHT HARDWARE per instructions of SPACEX’s Process

Engineers.

+ Modify, repair and rework of the electronics and testing equipment

used in testing in PCBA’s graded as tiers T1, T2 and T3 systems

(FLIGHT HARDWARE).

+ Documented all work performed according to work instructions in

the test plans contained in each of specified Work Orders and

outlined in the IPC J-standards of SPACEX’s technical library,

+ Performed daily work floor and shop maintenance in accounting for

tools, instruments and devices used in SPACEX’s production

processes.

+ Solder/ desolder electronic through-hole components (diodes,

capacitors, inductors, jfets, mosfets, trim pots resistors, inductors)

as well as SMT- 0402 components and devices on PCB’s and

other board modules eventually processed the automated testing

systems.

+ Prepared PCBA’s masking them for the final process of applying

conformal coating, as well as performing direct hand application

of epoxies for those highly specialized PCBA’s that assemble into

T1 flight systems hardware.

12/2016 – 6/2017 INTEL, Calabasas, CA

Microprocessor Testing Laboratory Technician

+ Collaborate with Intel’s Senior Microprocessor Engineers in devising

test parameters, testing protocols and testing techniques used to

test, monitor and record performance metrics of newly designed

prototype microprocessors.

+ Construct, build and fabricate the testing fixtures, apparatus, AC/DC

power supply units and computer interfaces per instructions of Intel

Microprocessor Engineers.

+ Modify, repair and rework of the electronics and testing equipment

used in testing microprocessors; testing fixture servo-motors,

pneumatic/ hydraulics systems and their operation lines and

modify programs to their PLC’s (Programmable Logic Controllers)..

+ Document all repair work, equipment or material replacement,

orders and requisitions for parts/ materials.

+ Solder/ desolder electronic through-hole components (diodes,

capacitors, inductors, jfets, mosfets, trim pots resistors, inductors)

as well as SMT- 0402 components and devices on PCB’s and

other board modules controlling the automated testing systems.

10/2016 – 12/2016 Carlisle Interconnect Technologies, El Segundo, CA

Electronics/ Electro-Mechanical Technician

+ Maintenance, repair and servicing of manufacturing equipment

and automated product assembly lines; the electroplating machines,

their system monitoring of solution reservoirs and/or modifying the

programs to their PLC’s (Programmable Logic Controllers).

+ Reroute wiring, troubleshoot communications loss and/or replace the

electronic communications network equipment linking the individual

production units used in Carlisle’s manufacturing and batch tracking

processes.

+ Solder/ desolder electronic through-hole components (diodes,

capacitors, inductors, jfets, mosfets, trim pots resistors, inductors)

as well as SMT- 0402 components and devices on PCB’s and

other board modules controlling the automated used

in Carlisle’s production process.

+ Installed NEW electroplating production units or modified

the patented production equipment on various production lines of

the plant.

+ Documented all repair work, equipment or material replacement,

orders and requisitions for parts/ materials.

7/2015 – 7/2016 Oberthur Technologies- IDEMIA

Rancho Dominguez, CA

Electronics Repair Electro-Mechanical Technician

+ Diagnose faults, troubleshoot malfunctions and repair/ rework the

electronics and communications network of the equipment used in

Oberthur’s manufacturing processes.

+ Solder/ desolder electronic through-hole components (diodes,

capacitors, inductors, jfets, mosfets, trim pots resistors, inductors)

as well as SMT- 0402 components and devices on PCB’s and

other board modules controlling the automated/ robotic units used

in Oberthur’s production process.

+ Maintenance, repair and servicing of the production robotics

assembly lines; the servo-motors, hydraulics systems, load and/or

modify programs to their PLC’s (Programmable Logic Controllers).

+ Occasional fabrication of parts and/or performing electronic

modifications of equipment in the Oberthur’s plant machining lab.

+ Document all repair work, equipment or material replacement,

orders and requisitions for parts/ material.

7/2014 – 7/2015 Astrophysics Inc., City of Industry, CA

X-Ray Unit Electronics Service and Repair Technician

+ Using specialized equipment (oscilloscopes, electromagnetic

spectrum analyzers) and Astrophysics Inc.’s proprietary testing

apparatus software, bench tested X-Ray generators and their

electronics /electrical components.

+ Using specialized equipment, performance test, evaluate diagnose

faults, troubleshoot malfunctions, and repair X-ray units

accessories (conveyor belts, automatic shutters, fail and safety

systems)

+ Troubleshoot faults and failures of PCB’s and board modules

down to the component level (diodes, capacitors, inductors, jfets,

mosfets, trim pots, resistors, inductors) and SMD’s used in power

and signal amplification of the X-Ray generators

+ Assemble, connect, crimp, solder and terminate the

wire/cable harnesses connecting the internal systems

(power, logic and auxillary) of X-Ray unit models 4056, 4056es

and 4117 (large scale and over-sized crate) and portals.

+ Program and test PLC’s used in controlling the mechanical

aspects of the finished X-Ray units and models

+ Operated CNG and electric powered forklifts to transport

X-Ray generators, crates and heavy equipment to and from

service labs, testing floors, and shipping and receiving area

departments.

+ Document all repair work, equipment or material replacement,

orders and requisitions for parts/ material.

9/2012 – 7/2014 Advanced Bionics LLC, Valencia, CA

Electronics/Electromechanical Assembler

+ Soldered SMD’s (Surface Mount Devices) and “through hole”

components onto PCB’s in a clean room environment.

+ Assembled the finished pieces and the micro-electronics of an

implantable medical device (for the hearing impaired) in a clean

room environment.

+ Using LabView Software and Advanced Bionics’ specialized

proprietary equipment, bench tested, performance tested and for

quality assurance verified finished devices.

2006 – 2012 ATTENDED SAN FRANCISCO STATE UNIVERSITY

1/2006 – 6/2006 Sieger Engineering LLC, South San Francisco, CA

Electronics - Electromechanical Assembler/ Test Technician

(company later OUTSOURCED to Asia – laid off )

+ Assembled and soldered the electronic components (SMD’s and

“through-hole components) onto PCB’s and other assemblies.

+ Operated and monitored wave solder machines used to

simultaneously solder micro PCB’s and PCB panels.

+ Operated 3-axis automated lathe used in machining metal alloy

rods and gears for robotic systems and accouterments.

+ Operated the automated injection mold systems used to

manufacture exterior parts for robotic systems.

+ Upload and /or modify utility and kinetic programs into the PLC’s

of the robotic systems and utilities.

+ Used Engineers’ diagrams, specifications, wiring schematics,

and assembly instructions, assembled and tested 1st article-

prototype robotics and their operational voltage/current

parameters documenting and verifying performance.

2/2005 – 5/2005 Day Wireless Systems, Oakland, CA

Microwave/ Radio Maintenance Technician

+ Performed daily checklist and inspection of safety equipment;

cables, clamps, hooks, body harness, tool belts, pulleys,

grounding straps and ladders when deployed to service, construct

and/ or perform maintenance for tower-mounted transmission

arrays (tx/ rx) and vertical elevated structures.

+ Perform daily load-up and checklist of wires, cables, terminators,

and various equipment for installations.

+ Installation of signal amplifiers and generators (multi-mode

duplexers), electrical coupling, transformers, and power

conversion systems used in signal/data transmission.

+ Installation of microwave/radio antennas onto building tops,

towers and other vertical or line-of-sight structures.

+ Performed low-power operational tests using specialized

equipment, portable computers and consoles,

for verifying transmission over VHF,UHF, and

microwave frequencies.

+ Performed low-power operational tests using specialized

equipment, portable computers and consoles,

for verifying transmission over VHF,UHF, and

microwave frequencies.

8/1999 – 5/2004 Macadam Computers Inc., San Francisco, CA

Sales Associate/ Apple Computer Repair Technician

+ Daily opened the store and facility for business.

+ Daily performed audit of cash transactions, POS (point of sales)

electronic transactions, check/account verifications

+ Facilitated sales of Apple software, Apple computers and 3rd party

Apple platform software, equipment and accessories.

+ As a Technician, installed memory, built Apple RAID systems and

installed Apple server software for special business Customers,

requisitioned Apple Support for Dealers/Resellers in acquiring

warranty electronics, troubleshot and repaired Apple computers.

4/1997 – 6/1998 Curtis Instruments Dublin, CA

Electronics/ Electromechanical Repair Technician

+ Use schematics, electronic tools (oscilloscopes, multimeters, etc.)

and equipment to diagnose, troubleshoot, repair or replace electronic

components on circuit board controller cards utilized in AC/DC

motors, motorized wheelchairs, electromagnetic induction systems

(PLC controlled relays), electric recreational vehicles.

+ Additional duties involved dynamo testing and performance analysis

of new revisions, product upgrades and 1st article items developed by

Curtis Instrument’s department of Engineering.

10/1996 – 3/1997 Alpha Electronic Systems Berkeley, CA

Telecom Network Technician/Cabling/Rack/Patch Panel installer

7/1996 – 9/1996 Irish Communication Company Rosemead, CA

Telecom Network Technician/ Server-Router-Repeater Installer

3/1996 – 6/1996 Dolby Laboratories Brisbane, CA

Audio Test Technician/Audio Electronics Assembler

6/1995 – 2/2001 129th California Air Nat’l Guard Moffett A.B, CA

Secure Comm- CyberSecurity / Satellite - Radio Communications Technician

+ Installation of stationary antenna systems and mobile RF communication

systems utilizing mixed signal processing Voice, Data, and Encryption

Keying.

+ Built and terminated infrastructure for computer networks (LANs/WANs)

monitoring transmissions of VoIP, Data, also relaying RF/ Microwave

Transmission Signaling.

+ Installation of Network systems; switching nodules, routing hubs, and Wi-Fi

Repeater Modules.

+ Managed loading and transport operations of Mobile/ ICS Satellite ground

systems for military deployment.

+ Configuration of Field & Mobile Communication Systems

(RF/ Microwave/Satellite Systems) and related AC/DC mobile power systems.

+ Installation, Routing, and Dressing of Fiber Optic, Category IIIe, IV, V, VI

Ethernet and COAXIAL (RF) cables and dressing.

+ Installed software security programs involving electronic Counter Measures

and encryption algorithms (Firewalls and Data Security.

4/1990 – 5/1995 U.S. Air Force Travis A.F.B., CA, McConnell A.F.B., KS

Lowry A.F.B., CO/ B-1B Bomber Aviation Systems Technician

AFSC: 45733 B-Shred “Engine, Instrument Systems and Flight Controls

+ Maintenance and servicing of APU’s (Auxiliary Power Units)

+ Maintenance of the AN/ALQ-161, Phased Array Radar

+ Maintenance of the B1-B Main Computer, IBM AP-101

+ Test and verify continuity of sensors, indicators, and systems Interfaces.

+ Operated portable AC 3 Phase/DC Power consoles.

(testing DC using motors and Hydraulic Actuators).

+ Operated lifts and vehicles to transport of APU’s, Hydraulic Units, and

EMUX (electronic multiplexing ) computer systems.

SKILLS and KNOWLEDGE

Read, understand and use electronic schematics and electrical/electronic diagrams for troubleshooting and isolation of faults.

Use microscopes to solder/desolder (fine pitch tools), to repair and to rework electronic components (surface mount and through-hole ) at board level including soldering leaded and SMT- 0420 components and devices. J-STD-001 and MIL-STD-2000A certified.

Use oscilloscopes, digital multi-meters, logic analyzers and probes and other specialized electronics test equipment and trouble-shooting techniques to analyze faults/malfunctions, to perform diagnostics, and to calibrate.

Assemble, build, fabricate and test prototypes, subassemblies, and electronic components following or using measurements, schematics, diagrams, with attention to procedures and tolerances specified by designing Engineers.

Devise criteria to perform testing procedures, data collection and documentation for research and development of electronic hardware innovations.

Practical and thorough understanding of the theories, principles, and operations of Electronics: AC/DC electronics/electrical power and power supplies, as a U.S. Air Force Electronics Tech

Can read and translate the color-coded rating of resistors into ohms (Ω) “resistance”, the numerical rating of capacitors “capacitance” into Farads (F) and relay switches/inductors “inductance” into Henrys (L) calculate AC/DC circuit behaviors (Z) “impedance” incorporating diodes, SCR’s

Adept at Shop time management. Manual skills include use of various hand tools such as drills, pneumatic or manual torque wrenches, nail/rivet guns and other manually operated equipment: band saws, drill presses, milling machines, belt sanders, lathes, hydraulic sheet metal press machines and sheet metal manual rolling press.

Renewed OSHA, HAZMAT, and ESD certifications and training required by NASA-JPL.

Use and operate CNC (computer numeric controlled) lathe, drill and laser cutting machines for fabrication of parts for assemblies/subassemblies.

Creatively talented to quickly draw, sketch and conceptualize 2D/ 3D models using CAD, 2D/3D-engineering software, FABRICATE PROTOTYPES by shop, hand crafting tools, and modeling techniques or use of 3D lathe

Experienced Operator of wave solder machines used in mass manufacture of printed circuit boards PCB’s.

SOFTWARE REPERTOIRE

MATLAB

LabView Test Station

DSS SolidWorks

AutoCAD 3000

Auto DesSys Form Z

Adobe CS Photoshop

Adobe CS Illustrator

Adobe CS InDesign

MS Word

MS Excel

MS PowerPoint

Citrix Production and Info Management Systems

U.S. AIR FORCE and CALIFORNIA AIR NATIONAL GUARD, EDUCATION and CAREERS

Technical College of the U.S. AIR FORCE, Colorado Springs, CO

8/2001 – 6/1996 California Air National Guard

5/1996 – 4/1990 Active Duty Air Force

Electronics Theory Part I,

Electronics Theory Part II

Boolean and Digital Logic

Electronics Basic Operations

Electronics Advanced Operations

Firmware Programming Mixed Signaling

Electro-Mechanics and the Applied Sciences

COLLEGE/ UNIVERSITY EDUCATION

San Francisco State University, San Francisco, California, 2007 - 2012

Brunel University, Uxbridge, West London, U.K. Great Britain, 8/2010 – 7/2011

(Study Abroad Program – Material Science & Foundry Sciences)

Bachelor of Science in Applied Industrial Technology - Electronics Engineering

Bachelor of Arts in Industrial Design/ Product Design

Contact this candidate