Hvac Facilities Site Engineer

CV_Sayem **** V*.docx Page * of *

Sayem Uddin Ahammed

Address: Flat 301 and 302, Anannya Apartment

* */*, ***** **********, Dhaka-1207, Bangladesh

Phone: +880 197*******

Email: *********@*****.***

OBJECTIVE

I am an electrical engineering post graduate with in-depth knowledge about codes, designs, regulations of the field and post graduate in business management and post graduate diploma in management want to share the knowledge and expertise for the safety of lives and successful completion of projects.

EDUCATION

2022

Post Graduate Diploma in Management (PGDM)

Institute of Management Consultants Bangladesh (IMCB). IMCB is a full member of the International Council of Management Consulting Institutes

(ICMCI).

2011 - 2013

Master of Science in Telecommunication Engineering Independent University, Bangladesh

2008 – 2011

Bachelor of Science in Electrical and Electronic Engineering Eastern University of Bangladesh

1999 – 2002

Master of Business Administration

Asian University of Bangladesh

1987 – 1988

Bachelor of Arts

Dhaka University

1980 – 1981

Higher Secondary School Certificate (HSC)

Govt. Saadat University College

1981 – 1986

Diploma in Electrical Engineering

Bangladesh Technical Education Board

1969 – 1979

Secondary School Certificate (SSC)

Bindu Bashini Govt. Boys High School

MEMBER OR AFFILIATION

• IEEE Member No. 92568237

• Institute of Engineers Bangladesh

• Institute of Diploma Engineers, Bangladesh.

• Accredited by Canadian Council of Technicians and Technologist (CCTT)- 2001.

• ABC Electrical Supervisory License from Bangladesh Electrical Licensing Board- 2002. Life Member of Rifles Club, Tangail.

• Life Member of Anglers Shomity, Tangail.

CV_Sayem 2022 V2.docx Page 2 of 8

• Electrical and Fire Safety Auditor – Alliance for Bangladesh Worker Safety.

• ISO Auditor (Contractual) - Intertek Bangladesh

• Former Director of Bangladesh China Chamber of Commerce and Industries (BCCCI))

• Certified Energy Manager by Association of Energy Engineers AEE

• Member of Institute of Management Consultants Bangladesh (IMCB)

• ISO 9001-2015 Lead Auditor

• ISO 45001-2018 Lead Auditor

• ISO 22000-2018

• ISO 20700:2017

• Trainer of Trainers on Electrical, Fire and Health Safety SKILLS

• Comprehensive knowledge of electrical engineering, design and codes.

• Familiar with regulatory standard and procedures of electrical (BNBC, NFPA, NEC, IEC, BS, EN), civil and mechanical trades.

• Safety Assessment skills, preparing reports on finding, suggestions on remedial

• Extensive knowledge of designing and building electrical subsystems

• Sound knowledge of digital, analog, embedded system circuit design and analysis

• Ability to monitor, supervise, coordinate and manage junior staffs

• Comprehensive knowledge on designing and installation of fire detection, suppression and sprinkler system

• Cost negotiating, correspondence, documents scrutiny, presentation

• Attention to detail with excellent communication and project management skills

• Possess sound organizational and analytical skills, Facilities Management

• Expert on Design-Build Negative Pressure Laboratory

• Understanding and implementing the FIDIC (International Federation of Consulting Engineers) guidance

WORK EXPERIENCES

09/2020 – Continuing

ARIDOD Tech Serve Ltd.

Project and Contract Manager

Project: 1st Phase of Design and Build of Intake, Raw Water Pipeline, and 500 MLD Water Treatment Plant at Gandharbpur under Dhaka Environmentally Sustainable Water Supply Project (DESWSP). 22 km Twin Raw Water Pipeline Construction Project.

Employer: Dhaka WASA (DWASA).

Main Contractor: Joint Venture of SUEZ International and OTV-VEOLIA. Field of Work: A to Z issues related to Project Management as per Contract Agreement

Roles & Responsibilities:

• Planning, Capacity Mapping & Implementation of Projects.

• Handling pre-qualification process, RFP, contract pre-award meetings, final negotiations, & drafting/ finalizing contract documents.

• Ensuring the operations and quality issues relates to services.

• Forecasting the project related matters, budgeting, cash flow, etc. 1.

CV_Sayem 2022 V2.docx Page 3 of 8

Developed and implemented accepted Engineering budgets and supervise actual expenses.

• Review Engineering design proposals, design drawings, specifications and other technical document submissions and recommend improvements.

• Discuss and negotiate with the clients in finalizing the Engineering issues. Conduct training to customers after completion of project.

• Lead the Company Project team people and responsible for all the relevant contractor’s people issues.

• Project Execution. Ensuring that all the project related activities comply the standards and the set forth guidelines in the Contract Agreement. 01/2012 - 07/2020

Uttaron Technologies

CEO

Responsibilities:

Field of Work: Industrial Survey/Audit and Engineering Solutions Roles & Responsibilities:

• Planning & Implementation of Projects.

• Ensuring the operations and quality issues relates to services.

• Forecasting the project related matters, budgeting, cash flow, etc. Developed and implemented accepted Engineering budgets and supervise actual expenses.

• Review Engineering design proposals, design drawings, specifications and other technical document submissions and recommend improvements.

• Discuss and negotiate with the clients in finalizing the Engineering issues. Conduct training to customers after completion of project.

• Organizing and participating the Safety Audits, preparing the Reports for RMG factories combining all issues on behalf of Alliance. Organizing safety trainings for the factories.

• Guiding on preparing design and drawing of Electrical and Fire Safety Systems. Playing a role as a Consultant on Safety Issues.

• Select, interview and award sub-contracting work to contractors/ suppliers and ensure works are delivered in good quality and timely manner.

• Attaining meetings with different clients. Close coordination with Project Management Committee of the ongoing projects.

01/2011 – 12/2011

Zamil New Delhi Infrastructure P. Ltd.

Country Operations Manager, Bangladesh

Field of Work: Mobile Telecommunication Infrastructure Roles & Responsibilities:

• Ensuring the deployment and quality issues relates to installation, operation and maintenance of passive infrastructure equipment.

• Forecasting the project related matters, budgeting, cash flow, etc. Developed and implemented accepted Engineering budgets and supervise actual expenses.

3.

2.

CV_Sayem 2022 V2.docx Page 4 of 8

• Review Engineering design proposals, design drawings, specifications and other technical document submissions and recommend improvements.

• Discuss and negotiate with the clients in finalizing the Engineering issues. Conduct training to customers after completion of project.

• Prepare operator and maintenance manuals and SOPs.

• Select, interview and award sub-contracting work to contractors/ suppliers and ensure works are delivered in good quality and timely manner.

• Attaining meetings with different clients. Close coordination with Project Management Committee of Huawei and Ericsson for successful rollout for Network Expansion of Mobile Operators in Bangladesh 09/1997 – 10/2010

International Centre for Diarrhoeal Disease Research, Bangladesh (ICDDR, B)

Manager, Electrical and Telecomm Engineering, Coordinator of Vertical Extension.

Field of Work: Civil, Electrical and Electro-Mechanical applications, Refrigeration and Air Conditioning, Telecommunication, Project Management, Facilities Management.

Roles & Responsibilities:

• Direct and coordinate, through subordinate supervisory personnel, activities of workers engaged in repair, maintenance, and installation of machines, tools, and equipment of Hospital, Labs, Animal House, Substation, Matlab Sub-Centre and other rented establishment outside the main campus to facilitate the facilities for the Scientists to conduct world standard research works.

• Perform Installation, Testing and Commissioning of ACMV (HVAC) and Building Automation systems in BSL3 Lab with a role of Project Engineer.

• Prepare operator and maintenance manuals and SOPs for the equipment.

• Review job orders to determine work priorities. Schedules repair, maintenance, and installation of machines, tools, and equipment to ensure continuous functionality of Hospital, Labs and other facilities. Coordinate activities of workers fabricating or modifying machines, tools, or equipment to improve existing facilities.

• Direct maintenance activities on utility systems to provide continuous supply of heat, steam, electric power, or air required for smooth operations of the Hospital and Labs.

• Full accountability for all changes to Electrical Maintenance Schedules throughout the Installation, Maintenance and Repairing of 1600 KVA Substation including 2000 and 800 KVA Diesel Engine Standby Generator, 700 nos. Split Type Air Coolers, Precision and Window type Air Coolers, 350 nos. Refrigerators, 60 nos. ultra-low Freezers, 2 nos. walk through Cold Rooms, Room Heaters, Incubators, Auto Cleaves, big Drier and Washing plants, Audio (PA) and lighting system of International Auditorium, Telecommunication system, CCTV and Access Control System.

• Leading the project of Electrical Energy Monitoring, auditing framework to save energy. Evaluates and recommends methods of load control to 4.

CV_Sayem 2022 V2.docx Page 5 of 8

reduce utility demand and costs.

• Development and implement accepted Engineering budgets and supervise actual expenses

• Develop preventive maintenance program in conjunction with Engineering and Maintenance Staff.

• Review maintenance reports, inventory of spares/accessories and statistics to plan and modify maintenance activities.

• Inspect operating machines and equipment for conformance with operational standards.

• Leading the development of the Electrical Trade and assisting with identification of the requirements for other trades. Organized Training for Core Staff.

• Direct responsibility to conduct annual performance rating of Engineers, Technicians and Contractors.

• Coordinate and manage all detail of the project Vertical Extension and Expansion of Hospital Building including budgeting, a 28 Million Dollar project from inception to completion in compliance with the guideline of the donors like USAID, GoB, JICA, etc.

• Forecast monthly progress claim and expenditure budget.

• Supervise contractors to ensure works are carried out as per schedule and in good quality to meet international standard.

• Lead and manage a team of Engineers to ensure works are carried out as per schedule.

• Select, interview to award sub-contracting work to contractors/ suppliers and ensure works are delivered in good quality and timely manner.

• Provide guidance to Engineers in the selection of equipment for the project. Involve in technical discussion with MEP consultants.

• Review Engineering design proposals, design drawings, specifications and other technical document submissions and recommend improvements for Civil, Electrical, Electro-Mechanical issues, Substation, HVAC, Building Automation, Fire Detection & Suppression System, Passenger, Cargo & Food Lifts, ETP/STP plant, etc.

• Provide advice and guidance to Consultant’s Engineers involving all aspects of HVAC facilities design.

• Review reports and studies to identify deficiencies and participate in the planning of construction/redesign and phase lifting programs.

• Utilize appropriate software and hardware tools to track load changes other parameters of design, construction, operation and maintenance a repair.

• Establish energy and heat load budgets with the objective of identifying current deficiencies, anticipating future requirements and estimating factors to be included in construction planning.

• Discuss and negotiate with the users in finalizing the Engineering specifications. Negotiate with suppliers in supporting Engineering projects to acquire the best financial deals.

• Present Engineering blueprints, project standing updates and incident reports to project Director.

• Communicate to Government org. (Telephone Board or Power Development Board) and other Organizations to get support on various issues.

• Providing input into and executes strategic plan for assigned CV_Sayem 2022 V2.docx Page 6 of 8

department(s) consistent with the strategic vision of the division.

• Providing input and direction in the development and monitoring of fiscal budgets, division operations and strategies to produce both short-term and long-term sustainability of the Organization.

04/1994 – 08/1997

ALCATEL CIT (France),

Bangladesh Branch

Assistant Engineer and Maintenance In-charge.

Field of Work: Peripheral, Substation and Generator, Rectifier, Precision Air Conditioning, Fire Detection, Battery Bank.

Roles & Responsibilities:

• Installation, Commissioning, Operation and Acceptance Test for the big Customer like BTCL former Bangladesh Telephone and Telegraph Board.

• Direct responsibility for a team of Electrical Engineers, Technicians and Contractors and organizing Inventory at sites.

• Discuss and negotiate with the clients in finalizing the Engineering issues. Conduct training to customers after completion of project.

• Prepare operator and maintenance manuals and SOPs, Documentation on Project for the clients and future record.

01/1992 – 02/1994

Design Engineers and Architects

Electrical Designer and Site Engineer

Field of Work: Designing and Supervision.

Role & Responsibilities:

• Designing and top supervision for the on-going different projects. Preparing and handover Electrical Drawing and Estimate to the clients. Performing the quality test of the materials received at site.

• Making the payments procedure for daily wager.

• Procuring of emergency items and permissions for projects from different authorized agencies.

• Direct responsibility for a team of Electrical Engineers, Draftsman and Inventory at sites.

02/1989 – 12/1991

Z. F. Enterprise

Site Engineer and Line Supervisor

Field of Work: H. T. & L.T. Electrical Line construction. Roles & Responsibilities:

Mange all detail of the project from inception to completion.

• Supervision of the ongoing projects- Construction of High-Tension Line from Cox’s Bazar to Teknaf under the 18 Town Electrification Project of BPDB.

• Lead and manage a team of Engineers, Technicians and Daily Labor to 5.

7.

6.

CV_Sayem 2022 V2.docx Page 7 of 8

ensure works are carried out as per schedule in timely manner.

• Preparing as built line drawings, documentation on the Project for the clients and future record.

WORK UNDERTAKEN THAT BEST ILLUSTRATES CAPABILITY

Developing different protocol, SOPs for different projects. Project Management from inception to completion.

COMPUTER SKILLS

Microsoft package: Windows10, Microsoft Office Suite Database operation: Microsoft Office Access.

Project Management: MS Project, Primavera P6.

Engineering Software: ACAD, Solid Works.

Thermography: SmarView.

TRAINING

• August 2006 Singapore- Received Training on Designing, Construction, Operation and Maintenance of Bio-Containment Facility (BSL 2, 3 and 4 Laboratory) includes MEP issues, waste management of a negative pressure room.

• September 2006 Singapore- Received Training on Understanding the critical and essential parameters of a Diesel Generator.

• September 2007 Singapore- Received Training on ACMV (HVAC), Building Automation of Bio-Containment Facility (BSL 2, 3 and 4 Laboratory).

• November 2007 Japan- Understanding the Good Manufacturing Process of Fire Detection and Suppression System at factory during manufacturing process.

• November 2007 Thailand- Workshop on Designing, Construction, Operation and Maintenance of Bio-Containment Facility (BSL 2, 3 and 4 Laboratory).

• January 2008 Bangladesh- Received Training on Organizing and Working with a Team.

• February 2008 Singapore- Visiting the SG Hospital and Govt. Livestock Research Centre to gather knowledge on Designing, Construction, Operation and Maintenance and waste management of Bio-Containment Facility (BSL 2, 3 Lab).

• March 2008 England- Hands on Training on operation of Precision Type Air Conditioner at factory during manufacturing process.

• May 2008 Bangladesh- Training on Procurement using Public Fund through PPR 2008.

• September 2008 Canada- Received Training on Designing, Construction, Operation and Maintenance of Bio-Containment Facility (BSL 2, 3 and 4 Laboratory) at world’s biggest facility. Main focus of the training was on MEP issues of a negative pressure room.

• February 2009 Bangladesh- Project Management, Monitoring and Forecasting through MS Project. Training on Building Safety Codes and Fire Fighting.

• June 2009 Bangladesh- Training on How to Conduct an Effective Interview.

• March 2010 France- Understanding the Operation and Safety of Lifts at factory during manufacturing process.

• November 2010 Singapore- Visiting the facility of Jonson Control to gather knowledge on Building Automation products.

• October 2016 Chengdu, China- Attaining 2016 South Asia Collaboration on CV_Sayem 2022 V2.docx Page 8 of 8

Production Capacity (Chengdu) Dialogue as a Director and Delegator of Bangladesh China Chamber of Commerce and Industries (BCCCI). Visiting different Industrial Zones at Chengdu to understand the manufacturing process.

• November 2017 Chengdu, China- Attaining 2017 Chengdu Dialogue on South Asia (Pan Asia) Production Capacity Cooperation as a Director and Delegator of Bangladesh China Chamber of Commerce and Industries (BCCCI). Visiting different Industrial Zones at Chengdu to understand the manufacturing process.

• November 2018 Shanghai- China- Global Cross-border E-commerce Summit

& the 2nd Advanced Training on the Belt and Road Cross-border E-commerce at Shanghai.

Visiting Countries/Cities- Geneva, Switzerland, Belgium, Germany, Milan, Venice, Rome.

LANGUAGE SKILL

• Bengali- Excellent in listening, speaking and writing.

• English- Excellent in listening, speaking and writing.

• Hindi- Good in listening and speaking.

REFERENCES

• References available on request.

Contact this candidate