*

Dimaano, Valentino L. Registered

Electrical Engineer

Bldg 3, Flat 4 Filipino compound,

Abu Mihjan Street,Doha Qatar

Qatar Mobile Phone: +974- 77808336/ 30595633 E-

mail address: adsmn6@r.postjobfree.com

NOC Available / Free lancer With

Driver’s license

CURRICULUM VITAE

EMPLOYMENT HISTORY:

PROFESSIONAL EXPERIENCE

Position : Senior Electrical Engineer

Employer : QBEC

Duration : June 2020 to June 2021.

Project: QETAIFAN ISLAND NORTH, FESTIVAL PLAZA

Location: Lusail Doha Qatar

Responsibilities

Estimate Electrical Materials on the Project. after the approval of Material by the Consultant.

Review and prepare material submittal for approval of Consultant

Review consultant’s comments for Fire alarm shop drawings and material submittal’s and prepare necessary document and correct Shop drawings to comply consultant comments.

Review consultant’s comments for Electrical shop drawings and material submittals for DB, MDB, SMDB, LV panel and prepare necessary document and correct of Shop drawings to comply consultant comments.

Coordinate with consultant regarding material submittal and necessary document before submission.

Prepare Schematic Diagram and Voltage Calculation for submission to consultant.

Coordinate with the consultant with regards to the As-built Shop drawings submittal.

Provide technical assistance to the project team at all times and constantly involve in all site activities

Prepare weekly report to Project Manager

Direct reporting to Project manager

2

Position : Electrical Engineer

Employer : SIEMENS

Duration : June 2019 to March 2020.

Project: TRUM Rail Ways, Qatar Foundation

Responsibilities

Review and prepare material submittal for approval of Consultant

Review consultant’s comments for Fire alarm shop drawings and material submittal’s and prepare necessary document and correct Shop drawings to comply consultant comments.

Review consultant’s comments for Electrical shop drawings and material submittal’s for DB, MDB, SMDB, LV panel and prepare necessary document and correct of Shop drawings to comply consultant comments.

Coordinate with consultant regarding material submittal and necessary document before submission.

Prepare Schematic Diagram and Voltage Calculation for submission to consultant.

Coordinate with the consultant with regards to the As-built Shop drawings submittal.

Provide technical assistance to the project team at all times and constantly involve in all site activities

Attend weekly Meeting with consultant.

Prepare weekly report to Project Manager

Direct reporting to Project manager

Attend testing and commissioning of Electrical work on site

Attend Testing and commissioning for Fire Alarm.

Attend Testing and commissioning of CCTV camera.

Prepare necessary document require by the consultant during testing and commissioning.

PROFESSIONAL EXPERIENCE

Position : Electrical Engineer

Employer : Shaker Consultancy Qatar

Duration : Sept 2018 to April 2019

Project: Supervision Testing &Commissioning for High Rise Building, Pearl of Qatar Responsibilities

Review & Correct the quality of shop drawing & material submittal prepared by subcontractor

Inspection of Electrical Installation on site as per Request by Contractor with attach Drawings with ( IR) document for Approval

Review and check material & equipment on site with Document as per material submittal submitted by Contractor

Testing and Commissioning of Electrical work on site.

Testing and Commissioning of Fire Alarm.

Testing and Commissioning of ELV such as CCTV camera & Data. 3

Position : Electrical Engineer

Employer : Gulf Engineering & Industrial Consultancy, Qatar Duration : May 2017 to Aug 2018

Project: Supervision services, Testing &Commissioning for Barwa Village Extension

RESPONSIBILITIES:

Review & Correct the quality of shop drawing & material submittal prepared by subcontractor

Review subcontractor shop drawing and Builders work drawing to ensure buildability on site

Review and check material & equipment on site

Issue Non-Conformance Reports on works which do not conform to applicable Project document and design.

Review and correct Electrical design submitted by subcontractor.

Ensuring the contractor(s) are complying with the standards and specifications of the contract documents through observation.

Maintaining records of the contractor manpower and equipment daily resources.

Supervises Electrical and ELV installation on site

Testing and commissioning of Electrical and ELV.

Issue Non Conformance Reports on works which do not conform to applicable Project document and design

Prepare Design Drawing before submitting to the Client for approval. Position : Electrical Engineer

Employer : Gulf Engineering & Industrial Consultancy, Qatar Duration : May 2017 to Aug 2018

Project: Supervision services, Testing &Commissioning Streetlighting and Showroom and building located in Madinah Al mawater RESPONSIBILITIES:

Review & Correct the quality of shop drawing & material submittal prepared by subcontractor

Review subcontractor shop drawing and Builders work drawing to ensure buildability on site

Review and check material & equipment on site

Review Material submittal submitted by subcontractor.

Issue Non Conformance Reports on works which do not conform to applicable Project document and design.

Review and correct Electrical design submitted by subcontractor.

Ensuring the contractor(s) are complying with the standards and specifications of the contract documents through observation.

Review and correct Electrical design submitted by subcontractor

Ensure construction projects are completed in compliance with 4

drawings and specifications, within schedule & allocated budget.

Ensure that manpower, equipment and materials are properly utilized

Check all material deliver on site by the contractor is as per Specification.

Check all electrical installation on site

Review all RFI given by the subcontractor for Inspection are completed before inspection.

Maintaining records of the contractor manpower and equipment daily resources

Supervises Electrical and ELV installation on site Testing and commissioning of Electrical and ELV

Jan 01 2015 to January 08, 2017

Position: Electrical Engineer

Employer: Khatib & Alami consolidated Engineering Consulting. P.O.Box 10281 Doha Qatar

Project: Supervision, Testing & Commissioning Qatar University College of Engineering and Pharmacy Collage

RESPONSIBILITIES:

Review & Correct the quality of shop drawing & material submittal prepared by subcontractor

Review subcontractor shop drawing and Builders work drawing to ensure buildability on site

Review and check material & equipment on site

Review Material submittal submitted by subcontractor.

Issue Non Conformance Reports on works which do not conform to applicable Project document and design.

Review and correct Electrical design submitted by subcontractor.

Ensuring the contractor(s) are complying with the standards and specifications of the contract documents through observation.

Review and correct Electrical design submitted by subcontractor

Ensure construction projects are completed in compliance with drawings and specifications, within schedule & allocated budget.

Ensure that manpower, equipment and materials are properly utilized

Check all material deliver on site by the contractor is as per Specification.

Check all electrical installation on site

Review all RFI given by the subcontractor for Inspection are completed before inspection.

Maintaining records of the contractor manpower and equipment daily resources

Supervises Electrical and ELV installation on site

Testing and commissioning of Electrical and ELV.

Prepare electrical design and Arrange shop drawings for Client requirement. 5

Jan 31 2010 to Dec 31, 2014

Position: Senior Electrical Engineer

Employer: Bouygues Batiment international.

P.O. Box 191986, Dubai UAE

Project: Qatar Petroleum District Project

Doha, Qatar

RESPONSIBILITIES:

Prepare Electrical design before submitting to the Consultant.

Review & Analyze Issued for Construction drawing find discrepancies and send RFI for clarification.

Review the content to ensure compliance with standard code and also meet the project brief requirement.

Review & Correct the quality of shop drawing & material submittal prepares by our subcontractor before submission to the consultant

Advices the subcontractor to rectify / modify comments raised by the consultant.

Coordinate & Uploading the incoming & outgoing of Request for Information

Review subcontractor shop drawing and Builders work drawing toensure built ability on site.

Manage and review the submission of electrical subcontractor submission document to ensure compliance with the design intent and project requirement.

Manage and report on the subcontractor progress on site to ensure programmed target are met.

Assess and highlight potential risks with design, installation and programmed target

Prepare technical query in case there is some discrepancy on the design drawings given by the consultant.

Coordinate weekly meeting with KEO and QPM.

Prepare ELV and electrical Shop drawings.

Supervises Electrical and ELV installation on site.

Testing and commissioning of Electrical and ELV

Prepared Estimation of Electrical Materials for the entire project.

Prepare Electrical estimation for the project as per material approval of the consultant. April 2009 up to Jan 3, 2010:

Position: Electrical Maintenance Engineer

Employer: Dubai Sport City (DSC)

P.O. Box 111123, Dubai UAE

Project: Crickets stadium, Victory Height

Pump station, Bradenton school

CICC Office & Infrastructure.

DUBAI, UAE

Facilties Management & Maintenance Company.

RESPONSIBILITIES:

Responsible for preventive maintenance of facility equipment, under direction from the Facilities Manager.

6

Responsible for electrical duties inside the facility including Monitoring BMS system, CCTV camera, Fire alarm system, data, voice and LCP control electrical. 7

Detect and report defective materials or questionable conditions to facility manager.

Maintain the work area and equipment in a clean and orderly condition and follow prescribed safety regulations

Perform other duties as assigned, including assisting inside the facility with general maintenance work.

Supervise and coordinate activities of workers engaged in repairing ofelectrical system and Pumps Station

Perform other duties as assigned.

Prepare daily manpower activities.

Supervises Electrical and ELV installation on site.

Maintain the Pumping Station and Water Treatment in DUBAI SPORT CITY. Nov 2008 to March 2009

Position: Senior Electrical Engineer

Employer: Bouygues Batiment international.

P.O. Box 191986, Dubai UAE

Project: F1 Theme Park (Union Properties)

Motor City, Dubai UAE

RESPONSIBILITIES:

Review & Analyse Issued for Construction drawing find discrepancies and send RFI for clarification.

Review the content to ensure compliance with standard code and also meet the project brief requirement.

Review & Correct the quality of shop drawing & material submittal prepares by subcontractor before submission to the consultant

Advices the subcontractor to rectify / modify comments raised by theconsultant.

Coordinate & Uploading the incoming & outgoing of Request forInformation

Review subcontractor shop drawing and Builders work drawing toensure built ability on site.

Manage and review the submission of electrical subcontractor submission document to ensure compliance with the design intent and project requirement.

Manage and report on the subcontractor progress on site to ensureprogrammed target are met.

Assess and highlight potential risks with design, installation and programmed target.

Testing and commissioning of Electrical and ELV.

Prepare daily manpower activities.

Supervises Electrical and ELV installation on site.

Prepare Electrical and ELV shop drawings

2006 to 2008

Position: Electrical Project Engineer

Employer: EMCO (Electro-Mechanical Company, W.L.L.) P.O. Box 11029, Manama, Kingdom of Bahrain

8

Project: The Amwajs Lagoon Island

(Shopping Mall) Manama Bahrain

Owner: Abudhabi Investment Group

RESPONSIBILITIES:

Responsible in preparation of shop drawing and coordinate with AutoCAD technician

Prepare electrical design.

Responsible in preparation of material submittal

Supervise of electrical installation site works

Site inspection and assessment of the monthly claim of the contractor including for all materials on site

Prepare monthly valuation claims and variation order

Provide material quantity take-off, obtaining competitive quotation from suppliers and prepare detailed bill of quantities as per contract and revised drawing.

coordinate with other disciplines as required by the project requirements

Attending meetings with Consultants, Main Contractor and Clients

Supervises Electrical and ELV installation on site.

Testing and commissioning of Electrical and ELV. 2004 - 2006

Position: Electrical Project Manager

Employer: Voltage Electrical Contractor Corporation

#5 Saint Catherine St. Perpetual Village, Metro Manila Project: Triangle North of Makati (TRINOMA)

(Shopping Mall Centre)

RESPONSIBILITIES:

Prepare Bill and Quantities as per contract and revised drawing.

Coordinate and prepare drawing site work.

Site inspection and coordination with the Consultant and obtaining the approval, updating the records.

Site progress and monitoring site daily productivity.

Monthly progress reports and fortnightly progress report. Forwarding to the Client/Consultant.

Verifying with the ordered materials and confirming the quantity during the receipt of material.

Prepare material submittal, paper works and documentation on the project specification

Prepare MEP Bill and Quantities as per contract and revised drawing

Prepare monthly valuation.

Attend weekly Contractor’s meetings with consultant’s

Testing and commissioning of Electrical and ELV. 9

1997--2004

Position: Electrical Project Engineer

Employer: Setraa Advance Technology Company (Electro-Mechanical) P.O. Box 53008, Riyadh 11583, K.S.A.

Project: King Abdullah Palace

Riyadh, K.S.A. - Saudi Oger (Main Contractor)

RESPONSIBILITIES:

Supervise Electrical and ELV installation works.

Coordinate and prepare detailed work schedule and set up teams of manpower in accordance of the load requirements.

Analyze and evaluate work done and get ideas from those directly involved to make the work even better.

Monitor progress of the project to ensure that the project will finish base on its time schedule and deadline.

Make shop drawing for Low voltage and Low current as per project requirement.

Prepare material submittal for approval of contractor / consultant

Testing and commissioning of Electrical and ELV. Project: THUMAMA MILITARY BASE

Riyadh, K.S.A. – Saudi Oger (Main contractor)

RESPONSIBILITIES:

Prepare plans and drawing prior to project

Prepare daily activities for the project.

Involved in Electrical, CCTV,FDAS,POS,TEL,DATA,FIBER OPTIC and other auxiliary works

Attended the necessary meetings with the contractors for the project development

Handles technical plan inquiry and revision to coordinate with the consultant.

Supervise Electrical low voltage and low current installation works

Implementation of Testing and Commissioning

Prepare accurate detailed quantity take-off as per drawing

Prepare monthly progress report for the project works

Testing and commissioning of Electrical and ELV

Position: Electrical Project Engineer

Employer: Setraa Advance Technology Company (Electro-Mechanical) P.O. Box 53008, Riyadh 11583, K.S.A.

Project: Yamamah Palace Saudi Arabia

Riyadh, K.S.A. –Saudi Oger (Main Contractor)

RESPONSIBILITIES:

Prepare materials submittals for approval by the consultant

Monitor technical progress of the project and include material requirement

10

Prepare “AS BUILT” drawing for submission to the client after completion

Prepare accurate detailed quantity take-off as per drawing

Supervise electrical low voltage and low current installation works

Day to day supervision of site work with stress on quality and quantity of workmanship

Monitor the availability of the types and quantities of material required on site.

Testing and commissioning of Electrical and ELV

1993-1997

Position: Electrical Project Engineer

Employer: Gemini Electrical Contractor

Binondo, Manila Philippines

Project: New World Renaissance Hotel (29 storey bldg) RESPONSIBILITIES:

Attended the necessary meetings with the contractors for the project development

Prepare daily manpower activities

Responsible in preparation of materials submittals

Prepare technical reports for construction execution such as revision and changes regarding various electrical works for lighting and power

Prepare accurate detailed quantity take –off as per drawing.

Prepare “AS-BUILT’ drawing for submission to the client after completion

Estimate all project materials for the project

Supervise electrical works and report all concerns to the Project Manager

Prepare plans and Drawing prior to the project.

Monitoring all site works condition and progress Position: Electrical Project Engineer

Employer: Gemini Electrical Contractor

Binondo, Manila Philippines

Project: Twin Tower Residential Building (24 Storey building) RESPONSIBILITIES:

Monitoring all site work condition and progress

Responsible in preparation of materials submittals

Prepare “AS-BUILT” drawing for submission to the client after the completion.

Dispatching and monitoring all of workers in their respective job

Preparation of overtime permit, daily or weekly accomplishment report

Preparation or requesting of tools and materials that they needed

Review & Analyse issued for construction drawing and raise RFI if there are discrepancies with the latest drawings.

Attended the necessary meetings with the contractor for the project Development.

11

Testing and commissioning of Electrical .

Position: Electrical Project Engineer

Employer: Gemini Electrical Contractor

Binondo, Manila Philippines

Project: Meiling Residential Building (26 Storey building) RESPONSIBILITIES:

Responsible in preparation of materials submittals

Attended the necessary meetings with the contractor for the project development

Prepare technical reports for the construction execution such as revision and changes regarding various electrical works

Prepare “AS-Built” drawing for submission to the client after the completion.

Prepare Bill and Quantities as per contract and revised drawings.

Monitoring all sites works condition and progress. 1990-1992

Position: Electrical Project Engineer

Employer: Andrada Construction & Development Corporation Manila, Philippines

Project: Coca-Cola bottle Philippines (Plant & offices) Biggest Plant in Asia. Owner: Coca Cola (Located In Sta. Rosa Phillippines) RESPONSIBILITIES:

Responsible in preparation of materials submittals

Prepare technical reports for the construction execution such as revision and changes regarding various electrical works

.Prepare ‘ ’ AS-Built drawing for submission to the client after completion.

Attended the necessary meetings with the contractor for the development.

Prepare Technical report for construction execution such as revision and changes regarding various electrical works.

Testing and commissioning of Electrical.

PROFESSIONAL QUALIFICATION;

Registered Electrical Engineer (REE)

License no. 0025138

License Examination for Registered Electrical Engineer Conducted by: Professional Regulation Commission of the Philippines PROFESSIONAL AFFILIATION;

Member -Institute of Integrated Electrical Engineers of the Philippines Inc.

(IIEE)

12

Member- Committee for Organising Engineer Professional Practice (Cat- B): Kingdom of Bahrain – Ministry of Works & Housing COMPUTER SKILLS;

Microsoft Office (MS Word, MS excel, MS project), Aconex EDUCATIONAL ATTAINMENT:

Graduate: Manuel Quezon University

Quiapo Manila Philippine’s

Bachelor of Science in Electrical Engineering

I believe my years of experienced in the Philippines, Dubai UAE, Saudi Arabia (KSA) and Manama Bahrain and Doha Qatar as Electrical Engineer will consider my job application favourable, current position coupled with twenty (20) years would appreciate hearing from you on potential opportunities. I HEREBY CERTIFY that the above information is true and correct to the best of my knowledge. VALENTINO DIMAANO

Electrical

Contact this candidate