Power Plant Commissioning Manager
Resume:
Mr Francis Xavier
First name: Francis
Last name: Xavier
Date of birth: 08/08/1952
Address: No 9, Jalan Putra 6, Taman
Putra Sulaiman, Ampang,
Selangor, 68000, Malaysia
Phone number: +601********
Email address: *******.**********@*****.**
m
Pro le
My portfolio of 45 years includes Commissioning, Construction Management, Engineering, Procurement, Calibration, QA/QC Management and Maintenance for Hydrocarbon Industries, Power Plants, Living Quarters, Mobil Offshore Production Units (MOPU) and General Industries. I have su cient experience in Pre-Commissioning, Commissioning, Hand-Over to Operations and Training the Operation Staff while commissioning. I also have a thorough knowledge and understanding of Projects from Conceptual to Hand-over.
Education
City and Guilds of
London Institute
Malaysia
Industrial Measurement and Control Technicians Part 1 Certi cate
Secondary
Vocational School of
Ipoh
Ipoh, Perak
Malaysia
Malaysian Vocational School Certi cate in Radio and Television Servicing 1968 – 1969
St Michaels
Institution Ipoh
Ipoh, Perak
Malaysia
Lower Certi cation of Education Examination 1967 1965 – 1967
Work experience
Jacobs Engineering
Sdn Bhd
Kuantan
Malaysia
Electrical & Instrumentation Lead/Superintendent 06/2016 – 07/2017 To con rm and supervise the E & I construction work. E & I Construction works as a PMT in E & I.
Inviting the client to witness the start up of all Electrical & Instrumentation equipment. Certi cation of all documents pertaining to the E&I hand-over for Mechanical Completion.
Zary and Associate
Consultant Sdn. Bhd.
Kuantan
Malaysia
Consultant Site Representative 06/2015 – 05/2016
To conform all defect Works carried by contractor is in accordance to requirement of contract.
Fulkrum Technical
Resources LTD for
McDermott Middle
East Inc
Kuala Lumpur
Malaysia
Consultancy Service / Inspector 08/2014 – 02/2015
To carry out all inspection for GRP cable trays which are manufactured in Malaysia. Con rming the Inspection and Testing Plan.
Attending all inspections by the request of NOI issue. Final Compilation of the QA and QC Reports Book.
Desmet Ballestra
S.P.A
Kuala Lumpur
Malaysia
E & I Specialist/Engineer 10/2013 – 12/2013
To certify all E & I Construction works carried out by sub-contractor. To witness the continuity test, mega test solo run of motors and Loop test. To witness the test of panels, (Relay panels, MCC panels, I/O panels). Pre-Commissioning of all E & I Equipment.
Commissioning off all E & I Equipment.
Start-up and carried out Performance test.
Work experience
Hand- over of all document after commissioning
SSME Sdn Bhd
(Sinaran Suria
Management and
Engineering)
Kuala Lumpur
Malaysia
Commissioning Manager 01/2013 – 10/2013
To certify all E & I Construction works carried out by sub-contractor. To witness the continuity test, mega test solo run of motors and Loop test. To witness the test of panels, (Relay panels, MCC panels, I/O panels). Pre-Commissioning of all E & I Equipment.
Commissioning off all E & I Equipment.
Start-up and carried out Performance test.
Hand- over of all document after commissioning
Petrofac E & C
Malaysia Sdn. Bhd.
Kuala Lumpur
Malaysia
Electrical, Instrumentation and Telecommunication QA/QC Inspector 10/2011 – 12/2012
Project: West Desaru (Mobile Offshore Production Unit) Job Scope:
Material inspection for all Electrical, Instrument, Telecommunication and some mechanical skids in which the package includes Electrical and Instrumentation. Calibration of all instrumentation.
Testing of panels (Relay Panels, MCC Panels, I/O Panels) Fabrication of supports and brackets for Electrical, Instrumentation and Telecommunications.
Installation work for Electrical Scope.
Installation work for Instrumentation Scope.
Loop test, as pre-commissioning work.
Petrofac E & C
Malaysia Sdn. Bhd.
Kuala Lumpur
Malaysia
Electrical, Instrumentation and Telecommunication QA/QC Inspector 05/2011 – 10/2011
Project: SEPAT (Mobile Offshore Production Unit)
Job Scope:
Material inspection for all Electrical, Instrument, Telecommunication and some mechanical skids in which the package includes Electrical and Instrumentation. Calibration of all instrumentation.
Testing of panels (Relay Panels, MCC Panels, I/O Panels) Fabrication of supports and brackets for Electrical, Instrumentation and Telecommunications.
Installation work for Electrical Scope.
Installation work for Instrumentation Scope.
Loop test, as pre-commissioning work.
Specialist Services
Dubai
UAE
Electrical & Instrumentation Supervising Engineer 09/2010 – 04/2011 Project: 160 men Living Quarters, QPS, Bongkok Project for client PT Gunanusa Fabricators, Celigon, Indonesia.
Job Scope:
To advise/supervise the client and client sub-contractors in all Electrical and Instrumentation installation.
Plan and assist client the Pre-Commissioning and Commissioning of the LQ. Specialist Services
Dubai
UAE
Pre-Commissioning/Commissioning Manager 11/2007 – 06/2009 Project: North Belut Living Quarters Module Project for client Conoco Philips. Job Scope:
Perform technical task assigned by Project Director, and act as focal point for the client related to the preparation and execution of the pre-commissioning, commissioning and the start-up activities.
Interface with engineering discipline, vendors and subcontractors. Review the project technical documentation and contractual requirements. Ensure safe execution of all commissioning activities through the application of the permit to work (PTW).
Take part in project planning and scheduling. Prepare the Pre-commissioning, commissioning, start-up, and test run execution plans with the assistant of client commissioning HOD.
Prepares the pre-commissioning, commissioning start-up and handing over procedures with the assistance of Discipline Engineers and the client Commissioning Leader. Participate to the review of the test run (performance test) procedures and operating manuals prepared by the Project Process Leaders.
Participates to HAZOP review meeting where deemed necessary. Assists Services Purchasing & Subcontracting Department for the de nition of the subcontractor’s scope of work.
Work experience
Prepares the commissioning spare part list & consumable list. Prepares Commissioning System Dossiers for Final Hand-Over. Transerve Offshore
Industries Pty
(Singapore)
Site Superintendent (Electrical and Instrument) 06/2007 – 10/2007 Project: Mari Project (Fabrication of Temporary Refuge Accommodation Module (TRAM) and Electrical Instrument Switch Room (EISR) for Clough Engineering Pty Australia (Main Contractor).
Consolidated
Contractors
Company
International
Site Superintendent (Electrical and Instrument) 03/2007 – 05/2007 Project: Khursaniayah Gas Plant
Supervision of sub-contractor in E&I scope of work. Ranhill Engineers
and Constructors
Sdn. Bhd.
Kuala Lumpur
Malaysia
Senior Electrical Engineer (Electrical / Control & Instrument for Power Division) / Site Manager 02/2005 – 02/2007 Project: 190 MW Teluk Salut Combine Cycle Power Plant Erection & Construction of all E&I works.
Kejuruteraan Wang
Emas (M) Sdn Bhd
Gurun,Kedah
Malaysia
Construction Manager 03/2004 – 2005
Project: NPK Fertilizer Plant in Gurun Kedah
Erection & Construction of all E&I works.
Alstom Export Sdn.
Bhd.
Manjung, Perak
Malaysia
Instrument Quality Control Engineer/Inspector 02/2002 – 12/2003 Project: TNBJ 2100MW Manjung Power Plant in Sri Manjung Perak (Coal Fire Power Plant) Boiler Section.
Performing all E&I work whicha re carried by the E&I sub contractor Entrutect/ Elin Sdn.
Bhd.
Kuala Lumpur
Malaysia
Erection and Commissioning Assistant Co-coordinator 02/2000 – 01/2002 Project: KHTP Independent Power Utility (NUR)
Scheduling all erection work and the commissioning work for E&I Peremba Kentz
Engineering (MEPC)
Sdn Bhd
Kuala Lumpur
Malaysia
Head of E&I Construction 01/1996 – 01/2000
Lead the coordination meeting every day for E&I scope
Other Companies Worked For
Perak River Hydroelectric Power Sdn Bhd
Unitata Sdn Bhd
P.D.Tai Meng Engineering & Construction Sdn Bhd
Aalborg Engineering Sdn Bhd
Cegelec (M) Sdn Bhd
Kian Tat Electrical Sdn Bhd
IWB Consultation (M) Sdn Bhd
Natec Corporation Sdn Bhd
Dialog E&I (M) Sdn Bhd
Powertron Resource Sdn Bhd (Sabah)
Ammonia Sync Gas Sdn Bhd
Skills
Languages
English
Bahasa Melayu
Tamil
Core Competencies
Excellent Communication
Understanding Customers
Needs
Team Motivation
In uencing
Coaching & Training
Presentations
Organizing & Time
Management
Versatility & Adaptation
Negotiation
Enforcing Standards
Task Delegation
Expertise
Process
Documentation
Work ow
Documentaion
People
Management
Customer Service Team Leadership Client Vendor
Management
Project
Management
Native
Limited
Limited
100 % 100 % 100 % 100 % 100 % 100 %
100 %
Contact this candidate