*

[SOLOMON ADESHOYE AIYEDUN, FCIEC, FCIPM,

CMRP, ASME, MPMI, MASQ, MNSE, MNIM]

[Phone: +1-469-***-****, +1-469-***-****]

[E-mail address: adsjft@r.postjobfree.com]

Profile

[I am a registered Mechanical Engineer and a Management Consultant. I worked for the NNPC (Nigerian National Petroleum Corporation), Nigeria where I grew up to a Management level.

While in NNPC, I attended several international and local Engineering and Maintenance courses, and many on- the-job training programs.

Also, while in NNPC, I worked in many departments notably, Maintenance department, SCMD - Supply chain management department and TQM - Total quality management department. I also served in many Process improvement Engineering and Maintenance projects in WRPC, as well as at NNPC Corporate level, details of which are shown in the body of the Curriculum Vitae. Professionally, I belong to several bodies as detailed in the body of the CV, on the platforms of which I continuously enhance my knowledge and leverage my networking capability. If given the opportunity of this employment, I promise to apply my wealth of experience and team player’s attitude to advance the business of the establishment to an enviable level] Experience

[NNPC, WRPC]

[Ekpan – Warri]

[Deputy Manager, Warehouse Section, Supply Chain Management Dept.] [April 2014 – December 2016] I carried out prompt annual physical stock taking exercise, (PST) of the Company’s Warehouse Inventory which enables the financial worth of the Company to be determined, thereby facilitating annual budget of the Company.

I ensured good storage and preservation of the Company’s materials in the Warehouse thereby saving a lot of cost.

I ensured prompt issuance of materials to end users for plant maintenance, laboratory and other diverse purposes.

I carried out the coordination of the three Warehouses in line with SAP guidelines. Through proper monitoring, I ensured the reduction pf material theft in the Warehouses I carried out annual budget o the three Warehouses. I planned for the continuous training of my staff, and provided good mentoring for them.]

[Deputy Manager, Maintenance Central Workshop, Maintenance Dept.] [March, 2011 – April 2014]

[My notable achievements are as follows:

2

I achieved procurement, installation and commissioning of a new 4.5kg dynamic RDI balancing machine in the machine tools workshop.

I achieved procurement, installation and commissioning of a new Barbee universal valve-testing machine in the Pneumatic workshop.

I achieved procurement, installation and commissioning of a new Water and Steam Sampling Analyzer System each for Boilers 1 & 2 and HRSGs 1& 2 in the Power Plant and Utilities department By the provision of the above equipment a lot of funds was saved for the Company. Also, a lot of expertise and skill in the use of the special equipment was gained by the staff]

[My duties are as follows:

I carried out machining of needed spare parts and components for the maintenance of various equipment in the plants.

I carried out rewinding and overhauling of several faulty electric motors for the plants. I carried out maintenance of various Analyizers in the plants. I carried out the maintenance of the fleet of the Companies vehicles. I ensured the running and operation of the Maintenance Tools’ store which facilitates maintenance activities in the workshop and in the plant.

[Deputy Manager, TQM Dept.] [April. 2009 – March, 2011]

[My duties routinely are, but not limited to the following: I produced the Products realization manuals for the various departments. I organized and conducted one Management/Contractors’ interactive forum for the company. I organized and conducted one Management/Staff interactive forum for the company. I organized and conducted two staff awareness workshops for the company. I organized and conducted two Internal auditors’ meetings for the sharpening of their knowledge. I continued with the process of ISO 9001:2000 certification for WRPC processes. I conducted the weekly health work for the physical fitness of the staff and Management of the Company in line with the Medical Service level agreement (SLA)]

[Member, NNPC Project PACE] [April, 2004 – Oct., 2007]

[I was transferred to NNPC Corporate headquarters to participate in the “Project PACE” Project PACE was an ACCENTURE driven project that was charged with transforming NNPC into a Profit driven company.

[Mechanical Supt., Maintenance Offsite section] [Oct 1998 – April, 2009]

[My notable achievements are:

I carried out various modifications of the Crude Oil receipt lines, Fuel oil/condensate lines in the Waste Water Treatment Unit, in readiness for the Process plants’ re-streaming of 2008’ I promptly restored Electric Power to the Jetty operations through the timely maintenance of the Diesel generating sets and it’s installation following the vandalization of the Power Cables supplying electric power to the Jetty.

[My duties routinely are, but not limited to the following: 3

I carried out the timely and regular Maintenance of the Marine Product Loading arms, product pumps and other facilities at the Jetty.

I carried out the timely and regular Maintenance of the Truck Loading arms, product pumps and their accessories at the Truck loading bay.

I carried out the timely and regular Maintenance of the Fire Fighting Equipment and their accessories in the offsite area.

I carried out the timely and regular Maintenance of the product Tank Farm Tanks, fixed and floating Roofs and their accessories and the product pumps.]

I carried out the timely and regular Maintenance of the Waste Water Treatment facilities to ensure FEPA guidelines and promote environmental safety.

[Mechanical Lead, Jetty Rehabilitation Project] [Sept., 1997 – Oct. 2001]

[I served as the Mechanical Lead on the WRPC Jetty Rehabilitation Project. The Project was an EPCC – Engineering, Procurement, Construction and Commissioning one. We carried out FEED – Front End Engineering Design, Basic Engineering Design, Detailed Engineering Design, FAT– Factory Acceptance Tests and Construction work for the Project to successfully deliver the Project. The FEED took place in WRPC, Nigeria while the Basic Engineering and Detailed Engineering Designs were carried out in Bucharest, Romania.

The FAT was done in Newark, England.

[Mechanical Supervisor, Power Plant & Utilities] [August, 1997 – Oct.,1998]

[I carried out effective maintenance of the three steam boilers and the packaged boilers as required. I carried out the maintenance of the boiler Feed Water Pumps, Fuel Oil Pumps and their accessories. I carried out the maintenance of the industrial boreholes and their accessories. I maintained the cooling water towers, pumps and their accessories.

[Mechanical Planning & Scheduling Officer – TAM - Turn Around Maintenance, 1994] [April, 1993 – Feb,, 1995]

[I carried out the planning and Scheduling activities for the Static and Rotating equipment using Primavera Project Software for the TAM - Turn Around Maintenance of WRPC Plant in 1994

[Mechanical Planning Supervisor, Fuels Plant] [April, 1992 – August, 1997]

[I effectively carried out the Planning and Scheduling of the Maintenance activities for the static equipment in the Fuels plant.

I also supervised the third party jobs effectively]

[Mechanical Supervisor, 2x30 MW GE Gas Turbines

& 2x55T HRSG - Heat Recovery Steam Generators] [Jan., 1990–, March, 1992]

[I carried out the maintenance of the two 30 MW GE gas turbines and the two 55T HRSG - Heat Recovery Steam Generators in combined cycle]

4

[Project Team Member, Mechanical, 2x30MW GE Gas Turbines

& 2x55T HRSG - Heat Recovery Steam Generators (combined Cycle) Project] [Oct.,1989 – Dec.,1990

[I effectively took part in the EPCC (Engineering, Procurement, Construction & Commissioning) of 2 x 30MW GE Gas turbines & 2 x 55T HRSG]

[Mechanical Team, Alstom Gas turbine, Petrochemical plant] [Oct., 1988 – Sept.,1989]

[I effectively took part in the maintenance of the 22 MW Alstom gas turbine in the Petrochemical Plant of WRPC]

[Mechanical Team Lead, Machinery Equipment, Refinery Process Plant] January, 1987 – Sept., 1988]

[I effectively maintained the Gas Compressors, Process Pumps, Steam Turbines, Feed Water Pumps, Fuel Oil Pumps, Potable Water Pumps, Cooling Water Pumps, etc]

[[Mechanical Team Lead, Static Equipment, Fuels Plant] [March, 1985 – December, 1986]

[I effectively maintained the Heat Exchangers, Columns, Drums, Fractionators, FCC Plug Valves PV1 & 2, FCC Slide Valves, (SLV-1&2), Block Valves, Piping & fittings, Heaters, Steam Boilers, Soot blowers, Product Tanks, Floating Tanks’ Seals, Loading arms (Marine & Truck Loading, etc]

[Maintenance Orientation program in the Process Plants, PPU, WWT, Offsite] [January, 1984 – March, 1985]

[Being my first year of employment, I went round the various sections of Maintenance department with different maintenance teams for work]

[NYSC – National Youth Service Corp] [Nov.,1982 – July, 1983]

[NNPC Refinery, Warri, Delta – State, Nigeria]

[NYSC – National Youth Service Corp] [Sept., 1982 – Oct., 1982]

[Igarra Technical College, Akoko Edo, Edo State]

[Mobil Oil Nig. Ltd]

[Murtala Mohammed Int’l Airport, Lagos]

[Yard Foreman, Tank Farm] [August, 1976 – August, 1977] I received Jet A-1 from the Truck Tankers into the Product Storage Tanks as and when necessary. I carried out quality control of the product tanks daily – the product is mainly Aviation Kerosene (Jet A- 1).

I transport Jet A-1 in a Truck Tanker to the Aircrafts as and when needed for fueling daily or fuel the aircrafts through the hydrant method depending on the prevailing conditions. 5

Skills and Achievements

[Member, TAM 1994 Maintenance Team, WRPC, Warri.

Member, TAM Maintenance Team, PHRC, Port-Harcour.

Member, Disciplinary Committee, WRPC, Warri.

Member, NNPC Project PACE.

Member, NNPC Transformation Change agents.

Member, Company Purchasing Committee CPC, WRPC.

Member, Jetty Rehabilitation Project, Mechanical Lead. Member, Gas Turbine Project Team.

President, Engineering Students’ Association (ENSTAS) 1981/82 Session] Courses/Trainings

[Competency-Based Interviewing Feb., 2015.

Managing upwards and making yourself promotable Aug., 2014. Leadership Competency workshop Aug. 2014.

Managing the Dynamics of the disciplinary function Jan., 2014. FAT Water/Steam Sampling Analyzers Systems (UK) July, 2014. FAT Universal Valve Testing machine Sept., 2012.

Total Quality Mgt Nov., 2009.

NNPC COMDP (037) Feb., 2006.

WWT Operation & Maintenance Training (Netherland & Germany) March, 2005. FAT Jetty Rehab. Project (UK) Sept., 2000.

Jetty Rehab. Project Detail Engrg., (Romania) May, 1999. Jetty Rehab. Project Basic Engrg, (Romania) Jan., 1999. Introduction & Application of Latest diagnostic Techniques (Japan) Oct., 1998. JCCP, (Japan) Oct., 1985]

Professional Memberships

[SMRP – Society for Maintenance and Reliability Professionals, USA. CIPM – Certified International Professional Manager -UK. CIEC – Certified International Expert Consultant -UK. ASQ - American Society for Quality, USA.

ASME - American Society of Mechanical Engineers, USA. IMC - Institute of Management Consultants, Australia. PMI - Project Management Institute, USA.

6

PMI - Project Management Institute, Nigeria..

COREN - Council for the Regulation of Engineering in Nigeria. NSE - Nigerian Society of Engineers, Nigeria.

NiMechE - Nigerian Institution of Mechanical Engineers. NIM - Nigerian Institute of Management, Nigeria.

FRCN - Financial Reporting Council of Nigeria, Nigeria.] Education

[January - March, 2021]

[IPMA-UK]

[Advanced Professional Postgraduate Qualifying Diploma in Organisational Development and Transformation]

[January - March, 2021]

[Int’l Expert Consultants, UK]

[Advanced Professional Postgraduate Diploma in Expert Management Consultancy]

[April, 2018]

[SMRP, USA]

[CMRP – Certified Maintenance and Reliability Professional]

[Sept.1999 – June, 2003]

[University Of Benin, Benin – City, Nigeria]

[MBA, Master of Business Administration]

[1977 – 1982]

[The Polytechnic, Ibadan, Oyo – State, Nigeria]

[HND, Higher National Diploma]

[December, 1978]

[WAEC/GCE]

[GCE “O” LEVEL]

’

[1973 – 1976]

[Federal Government Technical College] [Lagos, Nigeria]

[C&G, PTS 1 & 2 INTERMEDIATE]

7

[1971 – 1973]

[Mayflower School] [Ikenne, Ogun – state, Nigeria]

[Class 3 Transfer Certificate.]

Interest

[Internet browsing, Swimming, Table – Tennis]

References

[Available on request]

Contact this candidate