Aramco Assistant Manager
Resume:
RESUME
P V SRINIVAS,
***************@*****.***
Passport.no: N7597987
OBJECTIVE: To work in a leading company in the field of Electrical, where I can fully utilize my knowledge & skills, for the development of the company. Dedicated & Self- motivated.
WORK EXPERIENCE:
SHELL, QATAR – : MADINA GROUP (CONTRACTOR)
• Major Turnround #3
• PERIOD: October 2021 TO March 2022
• DESIGNATION: ELECTRICAL SUPERVISIOR
• ACHIEVEMENTS:
• LV Motors ABB Make up to 690V – Maintenance & Overhauling
• HV Motors ABB Make 6.6KV, 11KV – Maintenance & Overhauling
• HV Motor Testing – WR, IR, LEAP Test, Polarization Index
• Electrical Heat Tracing Maintenance
• HV/LV Breaker Maintenance (Tulip Contacts checking, Tightness, Dedusting)
• SHELL approved Competent Electrical Person (CEP) responsible for Electrical LOTO Isolation
• SHELL approved Electrical Permit to Work (EPTW)
RASTANURA CLEAN FUELS PROJECT \ RUNNING PLANT, SAUDI ARAMCO
• SAUDI ARAMCO ID: 8362360
• PERIOD: SEPTEMBER, 2018 TO MARCH, 2020
• DESIGNATION: AUTOMATION ENGINEER (E & I) from a sub-contractor company, NSH, CORPORATION
• ACHIEVEMENTS:
• Plant Maintenance Activities of the following:
1. Gas Turbine Generator (GTG) 11KV, 31MW, ge make 2. Steam Turbine Generator (STG) 11KV, 40MW, ge make 3. Load Shredding – managing power by External Energy sources, UPS\Battery banks, Solar system for lightings.
4. HV (6.6KV, 11KV up to 3650KW) \ LV (690V, 480V up to 315KW) Motors Maintenance & overhauling, ABB make
5. MCC, HV \ LV Distribution Switch Boards, LDB’s, EDB’s 6. Oil Immersed Transformer - 25MVA (33KV to 6.6KV) & 2.5MVA
(6.6KV to 690V)
7. Emergency DG maintenance
8. Dry Type Transformer – Indoor (160KVA, 690V to 400V) 9. Temporary Lighting \ Cable Laying & Modification works 10. Earthing Grid – Earthing cables Maintenance
11. Cable Routing layouts \ Cable Scheduling checking 12. SLD Checking & BOM checking
• Project Activities:
o Looking after all the electrical related activities of the project as per the Aramco Standard & as per the technical drawing of our Client, TECNICAS REUNIDAS
o CABLE TRAY & Its Fittings INSTALLATION – 900mm, 600mm, 300mm, 150mm Aluminum Ladder Trays. Make: Cooper Industries o CABLE PULLING ACTIVITIES (BOTH MV & LV CABLES) from field to the Panel in Substation – Control/Power Cables. LV Cable up to 240Sqmm & MV cable up to 150Sqmm) in Underground / Duct bank & Upper elevations. Make: Riyadh Cables Group Co.,
o 10/12.5MVA-13.8KV to 4.16KV & 2.5/3.125MVA-13.8KV to 0.48KV Transformer Erection
(Make: Wahah Electric Supply Co.,) & its Cable Bus Duct erection. o Lighting JB/Panel, Lighting Pole, 70W, 100W, 150W High Intensity Lamps installation & its angle fabrication works.
o Wall/Column Mounted 30KVA/45KVA Transformer (For Lighting & Power tools Receptacles) & its Frame Erection, Installation (Make: Crouse-Hinds by EATON)
o Substation inside, MCC, MV/LV Switch Gear Panels, AFD drive Panels, Battery Bank Panels erection/ Installation.
o Discussing with Client regarding Changes or Raising Technical query regarding drawing or modification as per site conditions. o Follow up with Planning Department for regular updates of Drawing
& materials.
o Handling a Team of 3 Supervisors, 5 Foreman & 120 different trade manpower
& allotting/Guiding them to achieve them their work targets.
• EHS: (Environment, Health & Safety)
• Meeting EHS requirements
• Zero Tolerance on Safety
• PTW & LOTO
Technical:
o No repeat of break downs.
o Maintain high equipment reliability by proper Preventive & Predictive Maintenance. o Breakdown analysis & Maintain history, Reports and Documentation. o Preventive & Break Down maintenance of Electrical and Instrumentation System
ABDUL ALI AL AJMI LTD, KSA
● Period: March 2017 to April 2018
● Designation: Electrical cum Production Foreman
● Achievements:
1. JIZAN, IGCC (INTEGRATED GASIFICATION COMBINED CYCLE) 2. Planning up & Material follow-ups for SAUDI ARAMCO projects viz electrical street lighting Panels. 3. Crusher plant production & maintenance (both electrical & mechanical) 4. Water, oil \ gas pipeline projects
● Field: Production in charge of 6 crusher plants
ESSAR STEEL INDIA LIMITED,
Period: July, 2006 – January, 2016
Designation: Assistant Manager, looking after SMS Siemag, German technology, Compact Strip Plant, caster successfully commissioned
Achievement:
Successful commission of Compact Strip plant, caster – 2nos each of which is 1.2MTPA.
Field: Operation and Maintenance,
Plants: 1) Hot Rolling Mill (HRM) - Finishing Rolling Mill area engineer, 2) Steel Melting Plant – CCM - as a Shift engineer, 3) Continuous Casting Machine, SMS Projects (CCM)-as an Assistant Manager Pelletisation plant WORK PROFILE: (Area wise)
HOT ROLLING MILL & CONTINUOUS CASTING MACHINE (Electrical & Automation):
Process Knowledge of HOT Rolling mill
Operation of rolling mill equipment’s through panel\PLC
Quick time process in roll change
Running the mill without any breakdown or cobble
Worked as a Finishing Mill area engineer
All types of AC & DC Motor Maintenance & troubleshooting
PLS Feedback checking in Genius blocks using HHM
UPS & battery bank panels, Electrical Panels & Motor Control Centre (MCC) Maintenance
Trouble shooting & Panels, motor maintenance in POMINI Roll Grinding machines
Handling of Shutdown & Breakdown maintenance jobs
Man Power Management
Worked as a Shift Engineer in CCM
Trained & Certified as Safety Engineer in 4.2MTPA project
Process Knowledge of Continuous Casting Machine
Hands on experience in Circuit breakers, VCB’s & Field devices like proxy switches, limit switches, Load cells, etc...
All types of AC & DC Motor Maintenance & troubleshooting in continuous casting plant
Troubleshooting & Maintenance of Electrical Overhead Traveling Cranes of 85T\100T of KONE
makes
Process knowledge of Torch Cutting Machine & Slab Marking Machine in continuous casting machine
Process knowledge of Caster equipment’s viz.., Mold, segments etc.…
Power Distribution Schemes
Handling of Shutdown & Breakdown maintenance jobs STEEL MELT SHOP, PROJECTS – ESSAR STEEL (HAZIRA) LIMITED CONTINUOUS CASTING MACHINE - PROJECTS (Electrical & Automation): o Worked as an Assistant Manager in Compact Strip Plant, Continuous Casting Machine
& pellet plant
o Handling the shift, as shift second person
o Area in charge mold & segment shop
o Successful Commissioning of CSP Caster
o 33KV Transformer & 110KV Substation maintenance
o 5MW motor maintenance
o Power cable Scheduling done for 6.6 KV SWITCH BOARD, Power Motor Control Centre
(PMCC), Power Control Centre (PCC)
o Erection, Testing & Commissioning of 6600V panel – Siemens make o Hydraulics Process & Instrumentation diagram of SMS Siemag documents checking with our Bill of Material
o Erection, Testing & Commissioning of PMCC & PCC Panels – Larsen & Toubro make o Erection, Testing & Commissioning of 2.5MVA Transformers – Kirloskar make o Plant Earthing – Erection activities
o Erection & Commissioning of Mapeko Tundish Preheaters o Erection & Commissioning of 50T segment transfer car along with Chinese commissioning engineers, QINYE, china - make o Power Distribution Schemes, single line Diagrams o ON\OFF, control valve checking & calibration
o Casting Process of Compact Strip Plant
o Safe loading & unloading of heavy equipment to their storage area from ship yard\barges o Man Power management & Spares Management, Drawing Approvals. Educational Qualification:
o Diploma in Electrical & Electronics Engineering with 78.83% in April 2006 from KONGU POLYTECHNIC COLLEGE.
o H.S.C from AET Matric.Hr. Sec.School, Erode, Matriculation Board with 66.9% in March 2004
o S.S.L.C from AET Matric.Hr. Sec.School, Erode, Matriculation Board with 71.9% in March 2002
Co – Curricular activities:
o State Level Technical Symposium – 3rd Place
o Paper Presentation on “POWER ELECTRONICS IN INDUSTRIES “ o Participant in State Level students drawing competition on “HERITAGE OF INDIA “ o Orange Belt – 3rd Kyu in Shoto Kan Karate Yeshu – Do Association o Trained & Certified as Plant, Health Safety & Environment (HSE) engineer Computer Knowledge:
o MS OFFICE
o Operating System: Windows
o Design: AUTOCAD (2D, 3D) & E-CAD 2014
Personal Details:
Father’s Name
P L Venkataraju (Late)
Date of Birth
02-12-1986
Languages
English, Hindi, Tamil & Kannada, (Speaks Basic Arabic),
(Understands Gujarati)
Nationality
INDIAN
Hobbies
Surfing, Playing Chess & Reading books
Declaration:
I hereby declare that the information given above is true to the best of my knowledge.
(P V SRINIVAS)
Contact this candidate