Field Service Engineer
Resume:
Daniel Desir
Field Analyst
Orange Park, FL *****
************@*****.***
Willing to relocate: Anywhere
Authorized to work in the US for any employer
Work Experience
Field Analyst (Technician)
SEAM Group - Cleveland, OH
August 2021 to July 2022
• Working in a team environment to provide the best lockout services in the industry.
• Identifying machines and equipment subject to LOTO procedures.
• Identifying all energy sources for the equipment.
• Collecting data on the equipment into the SEAM Group LOTO app.
• Interfacing with customer maintenance, health and safety and operators personnel to gather information about their equipment.
• Developing written procedures using Rapid LOTO app and software system.
• Reviewing the procedures for accuracy and quality.
• Printing out, laminating and organizing procedures for the customer.
• Providing training and consultation on LOTO for customers, including how to use Rapid LOTO app and online software program.
Avionics Electrical Technician
United States Department Of Defense - Jacksonville, FL October 2019 to June 2021
• Repair and replace defective components in motors, generators, controllers, storage batteries, switchboards, conductors, switches and varied electrical fixtures
• Install, maintain and repair electrical, electromechanical and electronic parts of machinery and equipment
• Test solid-state circuitry to determine defective components in analog and digital equipment along with defective parts replacement
• Read and interpret blueprints, schematics and wiring diagrams
• Plan and prepare work orders or instructions utilizing blueprints, sketches and drawings
• Evaluate electrical as well as operational problems
• Analyzing flight test data to diagnose malfunctions and study the operations of the electrical components
• Ensuring that all avionics equipment works properly before take-off and that they do not interfere with any other electronic device
Electronics Technician
United States Navy Reserves
February 2015 to February 2021
• Operated and maintained electronic transmitting and receiving equipment, as well as digital and analog computers
• Monitored control system and stored software in secure locations
• Interpreted electric and electronic schematics and mechanical layouts to diagnose equipment problems
• Installed and maintained databases on Department of Defense Servers
• Collaborated with IT personnel with any networking issues such as printing and data access
• Obtained measurements and readings using volt and ohm meters, IC Testers and dial indicators
• Inspect television equipment for defects, safety hazards and complete necessary repairs
• Perform system diagnostic testing to identify, troubleshoot, and fix defective system components, including multi-pin and RF/coaxial connectors, as well as Category 5/twisted pair cables
• Configured mail processing network, including network switch and IP configurations
• Monitored LAN network environment including switches and software applications
• Performed installations and systems testing on naval shipboard vessels, airborne platforms, VLF, HF, VHF, and UHF radio communications equipment
• Install and maintained public address systems, radar equipment, earphone systems, intercom systems, electronic sirens, telephone systems, lighting stations, and other equipment and systems.
• Responsible for installing, administering and maintaining onboard communications and navigations systems.
• Install external antennas and cabling, repaired and maintained radio and multiplex equipment both analog and digital, and point to point communications systems. Engineering Technician
Serco - Mayport, FL
April 2017 to January 2019
• Design, develop, test, and manufacture electrical and electronic equipment such as communication equipment, medical monitoring devices, navigational equipment, and computers
• Design, develop, test, and manufacture electronic and computer-controlled mechanical systems
• Calibrate test equipment
• Inspect products and processes for flaws and identify areas of improvement
• Schedule, complete, and document routine maintenance on applicable manufacturing and test equipment
• Read schematics, assembly drawings, data sheets, and process sheets to perform testing, build fixtures, checkout and trouble-shoot equipment.
• Develop, assemble, procure or modify existing and new tooling, fixtures, and equipment to ensure efficient production methods.
• Identify and troubleshoot process, material, or equipment problems to minimize down time and recommend solutions.
Test Technician
IEM Power Systems - Jacksonville, FL
August 2016 to April 2017
• Wired and terminated over 20 data connection projects.
• Performed installation of communications hardware such as switches, access points and firewalls.
• Servicing, repairing, calibrating, regulating, fine-tuning, testing machines, devices, and that operate primarily on the basis of electrical equipment
• Installed wires in accordance with electrical schematics, ensuring proper connectivity on multiple switchboard gears
• Repaired or replaced over 100 defective components and wire installations were met through company guidelines including splicing, and pinning of wiring.
• Installed wires and Fiber Optic cables
• Tested lines to determine malfunctions, using a variation of test equipment and trained new hires.
• Examined systems to locate problems such as faulty connections and defective equipment. Field Service Engineer
United States Navy - Mayport, FL
July 2008 to June 2014
• Align fuel, water and air piping systems and control operation of diesel engines used for ship and small craft propulsion,
• Clean, lubricate, adjust, test and perform other preventive maintenance on diesel engines, reduction gears, air compressors, hydraulic or pneumatic clutches, steering engines and controllable pitch propeller systems;
• Operate and maintain desalinization plants used to make fresh water from sea water
• Operate and service refrigeration plants and air conditioning systems; repairs on aircraft equipment and calibration of shipboard equipment
• Repair or replace 30 valves, pumps, compressors, heat exchangers and control devices used with diesel engines and gas turbines; Make entries into and analyze machinery operating records and reports.
• Maintenance on multiple service diesel generators, high pressure air compressors, low pressure air compressors galley equipment, and air conditioning systems to ensure proper refrigeration was properly distributed
• Ensure fire pumps, distilled water system and reefer systems were operational for combat system tactics and navigational movements; interpret schematics, blueprints, assembly drawings and technical manuals.
• Prepared and installed proper lockout/tagout to protect work. Measured and fitted metal and/or resin chocks for large machinery such as generators, main engines, reduction and aircraft gears which as a result saved the Navy over 750K in repairs.
• Trained many personnel on troubleshooting, repairing, testing, and operating pumps which resulted in an increase in production.
• Managed engineering projects; generated and maintained design drawings, statements of work, specifications, and cost estimates.
• Maintained and repaired electrical systems associated with gas turbines and operating systems.
• Repaired and troubleshoots electrical systems.
• Disassemble, assemble, investigate, repair and adjust all parts related to gas and steam turbines during forced outages.
• Performed preventive maintenance on digital data equipment and control and monitoring circuits. Education
Associates in Electrical Engineering
University of North Florida - Jacksonville, FL
September 2016 to August 2018
High school diploma or GED
Skills
• Schematics (8 years)
• Blueprint Reading (8 years)
• Calibration (7 years)
• Engineering (8 years)
• Detailed Orientaion (7 years)
• Electronic Technician
• Soldering
• Testing (8 years)
• Supervisor (5 years)
• Schematic
• PLC
• Oscilloscope
• Solder
• Electrical
• maintenance
• Management
• Word
• Microsoft Word
• MS Office
• Troubleshooting
• Networking
• Active Directory
• Security
• Network Monitoring
• Cabling
• Equipment Repair
• Network Support
• WAN
• Leadership
• Documentation review
• Mechanical knowledge
• Help Desk
• Industrial equipment
• Customer support
• Analysis skills
• Field service
• Programmable logic controllers
• ISO 9001
• Quality assurance
• Aircraft maintenance
• Customer service
• Calipers
• Micrometer
• Debugging
• Hand tools
• MPLS
• Microsoft Excel
• Computer literacy
• Computer operation
• NEC
• Power tools
• Data collection
• Avionics
• Electrical engineering
• OSHA
• Project management software
• Presentation skills
• Management
• Quality control
• Data analysis skills
• CAD
• Microsoft Powerpoint
• Microsoft Office
• SharePoint
• Visio
• Strategic planning
• Manufacturing
• Sensors
• Operating Systems
• Microsoft Windows
• CRM software
• OEM
• Materials handling
• CMMS
• Controlling experience
• Customer relationship management
• Electrical wiring
• Hydraulics
• IP networking
• Technical support
• Machine learning
• Distributed control systems
• Software troubleshooting
• Communication skills
• Program management
• First aid
• Electrical systems
• ATS
• English
Links
https://www.linkedin.com/in/daniel-desir-58031487
Military Service
Branch: United States Navy
Rank: E6
Awards
Good Conduct Medal
January 2013
Certifications and Licenses
Driver's license
Secret Clearance
Top Secret Clearance
TS/SCI
OSHA 10
CompTIA A+
CompTIA Security+
Additional Information
Highlights of Qualifications
• 8 Years of Naval Training and Experience as an Engineer and Electronics Technician
• Current "Top Secret" TS Compartmentalized Security Clearance
• Skilled in interpreting ship based and portable communications equipment
• Performed administrative functions to include maintaining technical manuals, equipment records, and monitoring test equipment calibration requirements
• Knowledge of navigational and small boat electronic systems
• Detail oriented, able to prioritize deadlines and priorities with no supervision
• Read blueprints, schematics and floor plans
Contact this candidate