Power Plant Woods Cross
Resume:
Michael w. Montgomery
Evans, Co. 80620
************@*****.***
Objective: To continue doing something I truly enjoy, looking forward to being mentally and vocationally engaged daily. Also to have a well paying trade to build a future on.
10/2020-present. Aerotek
Loveland, Co.
Working for E-Light Electric lead electrician for a cab system 5 mega-wall. Set switchgear, transformers, terminate stator racks, aux. 120/208 panels build aux racks, terminate grounding transformers. Terminations motor control,das panels, cat to inverters.
3/2020- 10/2020 Aerotek Loveland, Co
Working for Van Zant LLC general foreman in charge of electrical and macanical. 29 mega watt for Rawhide Power Plant installing a cab system transformer recombiner inverter skids. MV feeders, combiners,system. Presently finishing up wire management and looking for the next one.
11/2019- 3/2020 Aerotek Loveland Co.
Working for Solar Purpose, local outfit: Dirt work; operating skidster and mini X, forming and installing rebar and pouring and finishing concrete pad. Setting switch gear cabinets, strut rack. Installing PVC conduit, inverters, panelboards. Foreman working with Superintendent /owner 2nd ground mount; still learning the technology.
6/2019- 11/2019 Aerotek Loveland, Co.
Working for REC Solar out of Calif. Bending & installing1, 1 1/2, 2, 3, and 4in. IMC. Installing and termenating weather stations, DAS panels,subcombiners, inverters, and comm. Termenation PV & production cabinets, switch gear and lighting protections system. Duties included lead/foreman responsibilities; learning the natural energy and tectnology.
4/2019- 6/2019 Elevation Staffing Cintennial, Co.
DCP Mainstream working for Kenny Electric installing metering skids. Phase 1 of 2 for Tallgrass, cable tray,PDC power distrubution centers, installing under ground robroy, pulling wire, termentation switch gear. Bendind 3&4in EMT table benders, 1224’s.
10/2018- 3/2019 Elwood Tradesmen Loveland, Co
Working for PTW running CLX, installing insturmentation, strut racks, supports for wiring compressors seperaters and PLC’s. Running 3/4 to 2inch GRC. Termenations: 480volts disconnects, VFD’s distrubushion blocks, some motor controls.
4/2018 - 9/2018 Trade Force Staffing Centinnial, Co
Sinclair Refinery: Turnaround in Hydro Cracker Unit consisting in running pipe for instrumentation, installing instrumentation, demo, re-pulling and terminating thermocouplings, running 3/8, 1/2 inch tubing, terminating PLC per wiring schedule. Working for Coates Electrical & Instrumentation, Ogden Utah.
11/2017 - 4/2018 Trade Force Staffing Centinnial, Co
Mid South Compressor Station for Oasis: Tank Batteries, Lact buildings, terminating 480 panels off 400 amp disconnects, installing cable,pulling and terminating CLX cable in Class1 - Div.1 areas.terminating plc’s installing heat trace and terminating JBS and end seals, running grc and pulling and terminating branch circuitry. Working for A. H. Inc. Dunn City N. D.
9/2017 - 11 - 2017 Trade Force Staffing Centinnial, Co
Turn around at Chevron Salt Lake Refinerary : Duties included,running conduit, wiring rotork valves, running 1/2”, 3/8” and 1/4: tubing and wiring thermal transmitters, pressure transmitters, installing temp power. Working for Coates Electric Ogden Utah
7/2017 - 8/2017 Parkway Electric Greeley, Co
New construction Cheese Plant light indrustrial/heavy commercial: Duties included lead in warehouse cutting, bending, and installing EMT conduit, branch circuitry, fabrication and installing supports for raceways, reading blueprints, planning executing wire pulls for zone circuitry,daily reports, lining out crew….
1/2017 - 7/2017 PCE Constructors, Inc. Billings, Mt.
New construction Jupiture Sulfur Refinerary SRU 1: Duties included cutting, bending, and installing branch circuitry, instrumentation and lighting installation and terminations, motors and some controls, building boards for different panels, installing heat trace and terminating starters and end seals.
4 /2016 - 11/2016 Interstates Electric Lexington/Scottsbluff, NE.
New construction Western Sugar: Foreman and leadman positions, reading plans, lining out crews, reading iso/plans heat trace, running conduit for branch circuitry, wire pulls, temp. Power, instrumentation terminations, scheduling, planning and bending pipe runs, daily logs and as builds.
1/2016 – present Coates Electric Salt Lake, UT.
New Construction: Holly Woods Cross Expansion. Foreman duties included lining crews out for installing lights and receptacle. Setting up conduit runs, wire pulls, LOTO’s, energizing Lighting Contact Panels, landing circuits, daily production/ foreman reports, red lines and as builds.
1/2014- 1/2016 Kenny Electric Services Denver, Co.
Duties include: Working for Kenny Electric on Ft. Lupton Expansion (Gas); also worked on Gen swaps and drilling rigs doing PM’s for Ensign. Above and underground piping,cad-weld, grounding, PLC’s terminations . Wyoming/ Montana safety counsel certified working at Holly Frontier Refinery demo & install switch gear, high resisting grounding cabinets. Bend layout and install EMT conduit. Heat trace lead. Pulling wire, install starters-end seals, setting cans and terminating labeling circuits.
12/2014- 7/2015 Holly Frontier Refinary Cheyenne, Wyo
Duties included: taking full units off line for preventive maintenance, installing fire eyes, heat trace, power racks, adding circuitry to existing panels, cutting, bending, installing conduit, transformer replacements, feeders, switch gear.
2/2013- 1/2014 Ardent Services Greely, Co
Duties include: bending GRC, Robroy, PVC, pulling and lacing cable, cable trays, setting layingout and stabbing PLC’s. 2 compressor stations gas installation a railhouse-tank farm and DCP additions.
12/2012-05/2013 Tradesman International Loveland, Co.
Duties included: Industrial Electrical work; pulling cable cutting and threading pipe. Red Lobster remodels, Cabinet displays for Menards, a lot of carpentry work.
10/2010- 9/2012 IES Industrial Electric Services Council Bluffs IA
Duties included: layout and install trenway, water treatment facility, cable tray, duct banks,vaults, power racks, 480 panel, transformers, grounding, bend,cut,thread and install both robroy and rigid up to 6”.
10/2005-05/2010 Builders M.D. Const Anaheim, Ca.
Duties included: Design build, bidding,scheduling hiring subs. Drawing plans. Building from the ground up. Business owner and contractor.
06/2004-09/2005 Evans Electric Rialto, Ca.
Duties include: Setting panels, fixtures, layout, lighting systems basic residential branch circuitry.
References: Upon request
Contact this candidate