LAWRENCE ABREGO

C: 210-***-**** adscbx@r.postjobfree.com

Summary

Licensed A&P Mechanic with active security clearance. Experience on fixed wing and helicopter airframes including military and commercial aircraft. A&P and sheet metal experience working flight line, Depot maintenance, as well as phase inspections, maintaining and servicing aircraft. Specializing in structural repairs and modifications. Experience includes: 747, A330, 707 (RC-135 & E-8), 737, 777, C-130, C-12, C-20, Challenger 350 / 650, Citation 560 Ultra V

(UC-35), Global 5000 / 6000, P-3, CH-47, CH-53, OH-58, UH-60, AH-64, S-64 (Air Crane), and Bell 214. Experience

A&P Mechanic

Boeing / San Antonio, Texas

06/2020 - Present

● Perform structural repairs and modifications.

● Servicing and maintaining Senior Level Government Official V.I.P Transport Aircraft (747).

● Perform routine inspections, servicing, and troubleshooting items such as landing gear, flight controls, electrical components, tires, hydraulic system, and oxygen system.

● Operational checks of repaired or modified systems for proper operation.

● perform close tolerance drilling, reaming, removal, and installation to critical support structures and fracture critical areas.

● Repair and replace aircraft structures and components, such as wings, fuselage, doors and functional components including rigging, surface controls, and plumbing of hydraulic units.

● Troubleshooting and testing of aircraft systems.

● Replace or repair worn or damaged components.

● Disassemble and inspect parts for wear or other defects.

● Servicing tires, hydraulic system, landing gear

● read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform structural modification / repair.

● Perform sealing, painting, shimming, and preserving structure.

● Use of tooling assemblies and fixtures for depot level modification and repair of structural parts.

● Installation of interior components, including floor boards, carpets, windscreens, cockpit and cabin seats, sidewall panels, ceiling panels, overhead stowage bins, lavatories, galleys, entryway floor coverings and windows. A&P Mechanic

M7 Aerospace / Wiesbaden, Germany

07/2019 - 05/2020

● Deployed A&P mechanic working in conjunction with DynCorp in Germany.

● Servicing and maintaining Cessna Citation 560 Ultra V (UC-35) and King Air (C-12).

● Perform phase inspections, routine inspections, servicing, and troubleshooting items such as landing gear, engines, flight controls, electrical components, tires, hydraulic system, and oxygen system.

● Operational checks of repaired or modified systems for proper operation.

● Repair and replace aircraft structures, such as wings, fuselage, doors and functional components including rigging, surface controls, and plumbing and hydraulic units.

● Inspect turbine blades to detect cracks or breaks.

● Test engine operation and rigging.

● Replace or repair worn or damaged components.

● Disassemble and inspect parts for wear, warping, or other defects.

● Servicing tires, hydraulic system, landing gear and oxygen system. Aircraft Structures Mechanic

Yulista (Lockheed Martin) / Crestview, FL

03/2019 - 06/2019

● Perform structural repair, fabrication, modification, and installation of parts, and assemblies on AC-130 aircraft.

● Plan, lay out, fabricate, assemble, install internal and external aircraft structures for aircraft modification installations following work order procedures and blueprints.

● Sheet metal repairs, rivet and HI-Lok installation.

● Perform structural repair, fabrication, modification, and installation of parts, and assemblies.

● Flight line work installing components and assemblies as well as correcting and repairing any discrepancies. A&P Mechanic

M1 Support Services / Fort Hood, TX

10/2018 - 03/2019

● Perform flight line maintenance, ground operations and handling of C-12 aircraft.

● Service, inspect, troubleshoot, repair airframe, engine, and associated systems to ensure continued airworthiness.

● Perform aircraft and system functional and operational checks and inspect work for compliance.

● Conduct structural inspections, maintenance and sheet metal repairs.

● Performing phase inspections and routine inspections.

● Servicing A/C system, tires, landing gear, hydraulic, and oxygen systems. A&P Mechanic

Aerotek (Bombardier Learjet) / Wichita, KS

08/2018 - 10/2018

● Perform inspections, maintenance and servicing of Global 5000 / 6000 and Challenger 350 / 650.

● Inspect, make adjustments, replace components, and correct any malfunction or discrepancies.

● Perform mechanical and electrical component removal and installations.

● Troubleshoot and repair aircraft.

● Assist and train new employees in the performance of their duties.

● Removal and installation of assemblies such as thrust reversers, tires, access panels, apu, and engine cowlings.

● Servicing tires, hydraulic system, oxygen system, and potable water system.

● Perform flight control cable tension check and adjustments.

● Lubrication of aircraft systems.

Aircraft Structures Mechanic

Aerotek (Northrop Grumman) / Lake Charles, LA

02/2018 - 08/2018

● Perform Depot maintenance on 707 (E-8) aircraft.

● Assemble and repair major structures such as fuselage panels, stringers, frames, bulkheads, rudders, flaps and stabilizers.

● Assemble parts using jigs, templates and fixtures.

● Perform sheet metal repairs, riveting, drilling and reaming.

● Corrosion removal and treatment.

● Modify assemblies to incorporate changes to structure.

● Training new and inexperienced employees on procedures and practices. A&P Mechanic

PlaneTechs (Aviation Technical Services) / Everett, WA 08/2017 - 02/2018

● Perform repairs, modifications and heavy checks (C & D) on 777, 737, and A330.

● Repair, modify, replace and perform routine aircraft maintenance.

● Training and assisting new and inexperienced employees.

● Modify, repair, or replace aircraft structures and components such as floor beams, mop-sills, crease beams, frames and webs.

● Complete specialized tasks, such as flap peening, cold working, and bonding resistance check.

● Fabricate repair parts.

● Conduct operational and functional tests.

● Installation of interior components, including floor boards, carpets, windscreens, cockpit and cabin seats, sidewall panels, ceiling panels, overhead stowage bins, lavatories, galleys, entryway floor coverings and windows.

● Corrosion removal and treatment.

● Servicing potable water and wastewater.

Aircraft Structures Mechanic

PlaneTechs (Erickson) / Central Point, OR

02/2017 - 08/2017

● Perform depot maintenance on S-64 Air Crane, CH-53 and Bell 214.

● Perform maintenance and manufacturing tasks to aircraft and components.

● Perform sheet metal repairs, modifications, and fabrication.

● Perform disassembly, cleaning, inspection, repair, fabrication, manufacturing, maintenance, and assembly of aircraft and components.

● Troubleshoot and correct aircraft and component discrepancies during normal work and AOG situations.

● Train new and inexperienced employees.

● Perform inspections as required.

● Locating and installing engine mount upgrade, stringers, formers, longerons, frames, and skin repairs as well as replacement.

● Corrosion removal and treatment.

A&P Mechanic

PlaneTechs (Aviation Technical Services) / Everett, WA 01/2016 - 01/2017

● Perform repairs, modifications and heavy checks (C & D) on 777, 737, A330.

● Service, repair and overhaul aircraft to ensure airworthiness.

● Repair, modify, replace and perform routine aircraft maintenance.

● Read and interpret manufacturer and airline maintenance manuals, service bulletins and drawings to perform repair, replacement or modification.

A&P Mechanic

PAE / Joint Base Lewis-McChord, WA

09/2014 - 12/2015

● Performed Reset maintenance and unit support on UH-60, AH-64, and CH-47 aircraft.

● Remove and install aircraft assemblies and components such as engines, rotors, transmissions, and flight controls.

● Service and maintain aircraft.

● Perform scheduled inspections, operational checks, diagnose and troubleshoot aircraft systems.

● Cargo door upper and lower track removal and installation.

● Gunner widows, upper and lower track removal and installation.

● Drilling up and installing Cargo Door windows, Gunner Door windows and upper and lower cockpit windows.

● Firewall and skin repairs.

● Removal and installation of main rotor hub, spindles and rotor blades. Aircraft Structures Mechanic

L3 Vertex / Corpus Christi, TX

11/2012 - 09/2014

● Worked in conjunction with Corpus Christi Army Depot (CCAD) to perform aircraft Depot maintenance, repairs and modifications on UH-60, OH-58 and AH-64 aircraft as part of the Recap Program.

● Troubleshoot malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, and APU.

● Repair or replace aircraft structures, and functional components including rigging surface controls and hydraulic units.

● 308 frame & 34.5” beam replacement.

● Adjustment of transmission beams.

● Fabrication and installation of skin panels, doublers, repair patches and composite repairs.

● Upper and lower gunner door track replacement.

● Upper and lower cargo door track replacement.

● Firewall repairs, Stringer repairs and replacement.

● Upper and lower tail cone stringer and skin upgrade.

● Beaded skin panel upgrade, Broom closet stringer and skin upgrade, Torque box upgrade, and Driveshaft mount upgrade. A&P Mechanic

L3 MID / Greenville, TX

03/2007 - 10/2012

● Performed depot maintenance, structural repairs, inspections, modifications and sheet metal fabrication.

● Corrosion removal and treatment.

● Bushing and bearing installation.

● Drilling and installing new honeycomb panels and replacement parts.

● Fabricating and installing new skin panels, repair patches and doublers.

● Installation of modifications and structural repair work for aircrafts 707 (RC-135), P-3, C-12, C-20, and C-130. Education and Training

Hallmark University: College of Aeronautics / San Antonio, TX 01/2006 - 03/2007

● A&P License obtained

● Associate of Applied Science: Airframe & Powerplant Technology

Contact this candidate