Production Operator Service Representative
Resume:
Steven Sai
Peoria, AZ *****
******.***@*******.***
Authorized to work in the US for any employer
Work Experience
Assembly & Test Tech - Level 2
Honeywell
April 2022 to Present
Operate assigned equipment
Participate in continuous improvement activities
Support the Honeywell Operating System
Maintain work area for operation and cleanliness
Comply with all safety rules
Record and report production data
Analyze data and production reports
Set up and change over equipment
Perform assembly and testing of pneumatic valves, actuators and starters Troubleshooting and reworking aircraft starters
Wire Harness Assembler Technician
PDS/Boeing - Mesa, AZ
November 2021 to April 2022
• Constructs wire harnesses and panels by cutting, sorting, color-coding, measuring, stripping, crimping, soldering, and routing various lengths, types, and gauges of wire, heat-shrink, and other related materials.
• Installs wire harnesses and components in panels and other assemblies.
• Operates tools and equipment such as wire strippers, crimpers, solder iron, wire identification and cutting machines, heat guns, and associated tools.
• Locates malfunctions and determines type and amount of rework required to repair each unit.
• Prepares packages for harness fabrication by cutting, labeling, and kitting.
• Tests wire harnesses, panels, and aircraft electrical systems for continuity and proper functioning.
• Follows schematics, drawings, and written or verbal instructions to set up and perform duties.
• Completes paperwork, hard copy and electronic version, associated with job assignment.
• Ensure all assemblies and detail parts are free of Foreign Object Debris (FOD) and non-conformances issues.
• Inspect and evaluate materials, components, sub-assemblies, assemblies, tools and product configuration in compliance with requirements, to observe, measure, and record conformity to customer, regulatory and company specifications.
• Report all non-conformances to manufacturing supervision or corrective action representative.
• Prepare rejection tags noting deviations from specifications on dimensions, finishes, material, processes, or quality when required.
• Follow all safety procedures and reports unsafe conditions to safety officials or manufacturing supervision.
• Reports job status and restraints to coworkers and supervision.
• Identifies production inefficiencies and suggests potential improvements to product or process. Assembler/Mechanical 2
Honeywell - Phoenix, AZ
October 2020 to August 2021
Operate assigned equipment.
Participate in continuous improvement activities.
Support the Honeywell Operating System
Maintain work area for operation and cleanliness
Comply with all safety rules.
Record and report production data.
Analyze data and production reports
Set up and change over equipment
Assemble conveyors accordingly to BOM’s and drawing’s Assembly Technician
L & W Machine Co - Phoenix, AZ
November 2018 to September 2019
Inspect, assemble, overhaul & repair 170/190 Embraer pack boards in accordance with FAA regulations. Assemble, fabricate, and clean parts to subassemblies and complete units. Use torque wrenches and other tools. Test, calibrate, inspect, and certify parts and mechanisms to meet tolerances and product specifications.
Packing finish products after quality inspection to customers. Print labels for part number of finish product for shipping.
Maintenance Technician
CDI TALENT & TECHNOLOGY SOLUTIONS, Cross - Lane, WV, US June 2017 to January 2018
Operate, maintain, and repair specialized processing equipment in a clean room environment to keep output high without compromising safety or quality. Performs mechanical assembly or inspection using a variety of tools and instruments. Ability to interpret written instructions and ensure products meet customers' specifications. Assemble, fabricate, and clean parts to subassemblies and complete units. Use torque wrenches and other tools. Test, calibrate, inspect, and certify parts and mechanisms to meet tolerances and product specifications.
Mechanical Repair Technician
AEROTEK AEROSPACE - Phoenix, AZ
May 2016 to February 2017
Repairs and repacks evacuation equipment from organization and other suppliers, including minor repairs, testing, assembling units for inspection, and folding & packing. Holding certifications on Embraer
Slides.
Lockwire Technician / Finisher
HARTER AEROSPACE - Tempe, AZ
August 2015 to April 2016
Front End Logistics (FEL) Technician 1and technical specs to determine the layout, Installation procedures and materials required for a job. Fabrication and or stock requisition/acquisition of required parts for assembly. Responsible for lock wiring all units in accordance with all specifications defined by the customer, by prints, and by case histories. Responsible for physically re-checking and validating all fastener torque requirements as required.
Responsible for visually inspecting and completing final unit pre-shipment operations such as installation of drive shafts, O-rings, caps, plugs, placement of lock wire "tamper seals", etc. Responsible for masking off and painting parts and units while following blueprints and special paint process according to customer requirements and specifications. Other duties as required or assigned within the job classification. Line Driver
HARLAND CLARKE HOLDINGS CORP - Phoenix, AZ
April 2015 to July 2015
Front End Logistics (FEL) Technician 1
Properly and safely operate forklifts and ride on powered industrial trucks moving material within and from the warehouse to the production area and returning finished products to the shipping area. Work closely with machine leads and site supervision to manage raw materials to insure continuous production of finished products
Operate a pallet jack or forklift and complete forklift safety training and certification requirements Communicate using 2-way radio, read work orders and support production machine changeovers Unload trucks with raw materials and Load recycling material on trucks in a safe, timely and cost-effective manner
Move all materials within production and locate copy Produce in/out report and complete problem material report
Remove pallet, strapping and packing materials and move recycle materials to recycle area Maintain facility EH&S and good housekeeping standards as needed Packer I
GOODRICH AIRCRAFT INTERIOR PRODUCTS - Phoenix, AZ
2013 to 2015
Folding evacuation slides (FAA required)
Inspects, test and packs evacuation systems in accordance with FAA. Folds and packs evacuation slides into compartment assemblies and complete paperwork in reference to parts and part number.
Verifies BOM's to parts received from stockroom.
Reading blueprints with quality requirements.
Machine Operator
GOODRICH AIRCRAFT INTERIOR PRODUCTS - Phoenix, AZ
2010 to 2015
A leading manufacturer and supplier of commercial airliner evacuation systems Assembler I
GOODRICH AIRCRAFT INTERIOR PRODUCTS
2010 to 2013
Operate ACM, organizing pattern to cut out of material. Prioritize daily cut task to meet and exceed internal and external customer's satisfactions. Utilize Cutworks software to produce evacuation parts and systems for internal and external customer. Perform Inspection and operate Cutworks software to calibrate the ACM daily to maintain machine efficiency.
Assembler I
Tech Group - Tempe, AZ
2009 to 2009
2009
Production Operator Assembler I
A global leader in injection molding offering contract manufacturing solutions for the medical and consumer industries.
Production Operator Assembler I
Operate machine and inspect small finished component. Operated multiple machines that produced 800 Epinephrine pins per hours. Packaged and shipped 1000 Epinephrine pins for the medical field daily. Learned how to load different grades of raw plastic material required for special production order. Order Picker/Material Handler/Shipper
Amazon.com - Phoenix, AZ
2008 to 2009
Responsible for performing the physical tasks involved in the pulling and filling of orders, also packaging, shipping, and distributing of products.
Customer Service Representative
Vantage Medicare - Phoenix, AZ
2007 to 2008
Handle customer inquiries, claims, and billing question. In 2008, viewed as an exceptional team player for successfully supporting an understaffed call center for one month. Awarded with Employee of the Month for going above and beyond daily activities and consistently meeting and exceeding customer expectations.
Certified in claims and billing department using ICD9 code for the Medicare field. Education
High School Diploma
Carl Hayden High School - Phoenix, AZ
High School
Skills
• Mechanic experience
• Aircraft maintenance
• Blueprint Reading
• Equipment Repair
• Manufacturing
• Assembly
• Quality Inspection
• 5S
• Materials Handling
• SAP
• Quality Assurance
• Mechanical Knowledge
• Micrometer
• Forklift
• Calipers
• Electrical Experience
• Calibration
• Schematics
• Hydraulics
• Packaging
• English
• Federal Aviation Regulations
• Plastics Injection Molding
• Fabrication
• Auto body repair
• Automotive repair
• Lean manufacturing
• Kanban
• Microsoft Excel
• Computer literacy
• Warehouse experience
• Microsoft Word
• Windows
• Conveyor installation
• Maintenance
• Tooling
• Communication skills
• Presentation skills
• Precision measuring instruments
• Warehouse distribution
• Basic math
• Power tools
• Computer skills
Certifications and Licenses
Driver's License
Contact this candidate