Sign in

Piping Gas Processing

Mumbai, Maharashtra, India
August 02, 2022

Contact this candidate



Designation: Piping Material Engr.

Specialization: Oil & gas

Area of Expertise:

Piping –Design Concepts, Detailed Engineering., Drg. Review & checking (Plot Plan, Equipment Layout, Piping Layout, Isometrics (IFC)), Review of PMS, VMS, BOQ estimation, PR of piping and mechanical vendor packages items, issue of enquiries and technical evaluation of Vendors’ offers/quotations, Project control, coordination & documentation, Supervision of Site Piping fabrication, Erection & installation as per Isometrics, equipment Installation & Support erection as per support Sketches &Schedule. Correspondence Address: Permanent Address _

E-102, Viviana, CasaRioGold, Lodha H.No. 59 C, Street No. 9, Maansingh nagar Palava City, Dombivli(E)-421204 Ladhewali Road, Jalandhar-144009 Thane, Maharashtra, India Punjab, India

Phone : +91-819*******/932-***-**** Mobile: +91-819******* (India) Email :


I want to work in an organization within an area where my technical knowledge and managerial skills are required. I want to contribute to the organization as well as augment my skills by fulfilling my duties in the challenging & dynamic working environment.



Qualification – Degree

/ Diploma /




/ Institute/ University

Percentage /



MBA (Oil & gas


University Of

Petroleum & Energy

Studies, Dehradun

College of Management and

Economic Studies, Dehradun




B-Tech (Mechanical



Dr. B.R. Ambedkar NIT,



1998 12th (Non-Medical) P.S.E.B

S.M.D.R.S.D, College,



1996 10th C.B.S.E Air Force School,Pathankot 76.8 WORK EXPERIENCE

9 years + hands on industrial experience in the Piping Design and project activities. Responsible for the review, checking & detailed design engineering (using AutoCAD, MS-office etc.) mainly on material (PMS, VMS, Datasheets, Technical specifications/Notes, MTO/BOQ estimation) and Supervision of Site fabrication, Erection & Installation, DPR for piping fabrication. Handled Project coordination, and management & consultancy activities using MS-Project software.

9 months Professional Teaching experience (Piping Design & Detailed engineering courses). Recent/Last Organization: VP Associates.,Pune (Contractor) posted at Heurtey petrochem India Pvt. Ltd.

(From 15.02.2022 to 05.04.2022 on Contract basis) CONTRACT ENDED. Recent/Last Designation: Piping Material Engineer

Recent Project: Residual Up gradation Furnace (RUF) at HPCL, Viskhapatanam Responsibilities:

Checking of Extracted isometrics (from sp3d model) for primary and secondary supports, MTO, Process parameters etc. using Navisworks -Freedom

Review of Piping Inputs (P & I Ds, equipment data sheets, Vendor Drawings etc.)

Upgradation of Piping MTO on MS-excel as per PMS, P & ID etc. and develop summarized report using pivot table.


Training (During B-tech, mech.) Duration: 6months

Description : Six Month Vocational Training at HMT, Machine Tools Ltd., Ajmer Area of Training: Design & Assembly

Dissertation (During MBA Oil & Gas) Duration: 6 months Project Title : Oil & Gas Pipeline Corrosion management and development of the concept of green corrosion inhibitors.

Description : Carried out the detailed study of different constituents of pipeline corrosion management such as Corrosion risk assessment of the pipeline system, the various types of pipeline corrosion and its inspection techniques etc.

Major Projects (During my Work experience)

1. Worked with VP Associates, Pune (Contractor) and Posted at Heurtey Petrochem India Pvt. Limited (From 15.02.2022 to 05.04.2022) as Piping Material Engineer. Responsibilities:

Checking of Extracted isometrics (from sp3d model) for primary and secondary supports, MTO, Process parameters etc. using Navisworks –Freedom.

Review of Piping Inputs (P & I Ds, equipment data sheets, Vendor Drawings etc.) Up gradation of Piping MTO on MS-excel as per PMS, P & ID etc. and develop summarized report using pivot table. 2. Worked in Aarvi Encon Limited, Mumbai and posted at M/s Ducon Infra-technologies Limited, Thane on Third party Payroll. (05.10.2020 to 21.04.2021)


Responsible for the preparation and approval of piping deliverables (PMS, VMS, Equipment Layout, MTO, Piping Layout, Support Sketches etc.) And Review of Piping Inputs (P & I ds equipment data sheets, Vendor Drawings etc.) Technical review of Vendor offers for piping items (Valves and fittings (CS/FRP/CSRL) etc.). 3. Worked in Aegis Logistics Ltd. As Deputy Manager –Projects (Piping) from 24.07.2018 to 24.07.2019. Responsibilities:

Executed the site supervision of erection and fabrication of new fire hydrant above ground line as per layout and detailed drawings and New LPG static mixer piping spool fabrication, testing, and installation and commissioning for Pipavav Jetty. Involved in the assignment of Preparing the plot plan of LPG Gas bottling plant with 34MT storage (above ground mounded) vessels capacity. Involved in the study & review of PFD and P&ID for above ground storage tanks (Refrigerated Propane and LPG & other petroleum products)

Responsible for timely approval and delivery of piping drawings & documents. Worked on the Planning layout, MTO cost estimation (process & utilities piping) for New Rail wagon Loading Gantry proposal. 4. Worked in Aditya Birla Grasim, Worli as Senior Project Engineer (Piping/Mechanical) (w.e.f. 07.03.2016 to 06.09.2016).

Worked on DCPD –Feed Grade project.

Responsibilities: Issue of technical enquires to different approved vendors of major equipment (i.e. reactors, filter presses, centrifugal pumps, Spin flash dryers etc.), piping items (pipes, valves, strainers, flanges, elbows and other fittings). Review of PMS, VMS, Design basis, Equipment layout, Piping Layout, Mechanical data sheets of major equipment, Technical evaluation of vendor’s offer.

4. Worked as Piping Engineer (on plant design engg. Consultant Agreement) in Enventure Technology Services

(I) Pvt. Ltd. at Bengaluru, Karnataka on 2 month consultant contract agreement.(w.e.f. 26.08.2015 to 26.10. 2015). Responsibilities:

Worked on project of detailed design engineering Of Effluent (OWS) treatment as piping design engg. Consultant.

Worked on manual pipe load calculations and reinforcement pad calculation as per ASME B31.3.

Carried out the Isometric and Fabrication Spool drawing checking. 5. Worked as Piping Engineer under Sub-Contractor (RCAD Drafting and Consulting Engineers) for ONGC Uran Plant revamping project (from 19.05.2015 to 20.08.2015). (On Contract basis). Responsibilities: Involved in the preparation of as built drawings (isometrics including Piping MTO) 6. Worked at Sterling Oil Exploration and Energy Production Company Limited, Nigeria (West Africa) in Department-Facilities (From 20.07.2013 to 10.12.2014) Responsibilities: Preparation of piping Layout and MTO. Supervising the piping fabrication jobs (including hydro test) at site. Preparation of DPR

(Daily Progress Report) for CNG Project. Supervision of day to day maintenance and operation activities (in plant Piping and Pipeline)

At Asemoku Jetty near delta region.

Involved in the Design (material selection, pipe thickness calculation), Procurement, fabrication/construction, Hydro-test, Installation of piping spools (4” size) from Wellhead Christmas tree (Choke housing) to 8” size Manifold for 16km below ground pipeline transportation to oil & gas processing unit at flow station. Worked on Energia Crude tanker unloading scheme project.

Performed size, thickness and pressure loss calculation for the crude oil pump suction and discharge piping.

Prepared the Piping MTO, Purchase requisition for PO, carried out Material Inspection as per Technical specifications & notes. 7. Worked as Engr.(Piping) at IOTDE Ltd., Mathura Road Office, New Delhi (100% subsidiary of IOT Group) in the Assam Processing Plant Renewal project of ONGC Ltd., Assam (From 01.05.2008 to 22.10.2009) Responsibilities: Preparation of MTO for painting & insulation using MS-office by referring P & I Ds and Piping layout. Preparation of PMS, VMS, Datasheets and Technical Notes. Involved in preparing piping layout of tank farm area of Lakhmani-iv, GGS (Group Gathering station) unit as per OISD118. Did Pipeline thickness calculations as per ASME B31.4 and ASME B31.8. 8. Worked as Plant/Piping Design Engr. at Lurgi India Company Pvt. Limited in the revamping project of HDPE (High density Polyethylene) unit of HPL (Haldia petrochemical Ltd.), Kolkata. (From 11.09.2007 to 31.03.2008) Responsibilities: Reviewed GAD (General Arrangement Drawing), PMS, Equipment layout, Vendor drawings, Instrument Hook-up Drawings and did isometrics updating accordingly with use of AUTOCAD-2006. 9. Worked as Design Engr. (Piping) at Doosan Engg. & Services Pvt. Limited in the Power & Desalination project Barkha Phase-II, Oman (From 03.05.2007 to 10.09.2007) Responsibilities: Did routing & 3Dmodeling on PDS for main cooling water line and auxiliary cooling water line for surface condenser. Also, prepared MTO of special items.

10. Worked as Piping Engr. at Saipem Triune Engineering pvt. Ltd. in the value added project (PMC Job) of ONGC at GCS, Kuthalum (MTO and Offsite layout modification) & IOCL Mathura Refinery (BBU). (From 29.09.2006 to 30.04.2007)

Responsibilities: Accomplished the Preparation of PMS & VMS, Painting specification and MTO on the basis of Piping Layout. 11. Worked as Design Engr. (Piping) at Jacobs H & G Pvt. Ltd., New Delhi in the project of TBBA, Plant at Bhuj for Solaris Chemtech Ltd. (From 01.05.2006 to 28.09.2006) Responsibilities: Involved in the preparation of PMS, VMS, data sheets and equipment layout. 12. Worked as Assistant Engr. (Mechanical) at Projects & Development India Ltd. (Govt. Of India Undertaking), Noida. In the revamp project of hydrogen plant at National Peroxide Limited, Kalyan, Mumbai

(From 16.06.2004 to 28.04.2006).

Responsibilities: Involved in the modification of structural drawings of the reformer, preparation of modified piping layout, Preparation of Isometrics in AUTOCAD-2000 from piping Layout, Marking support on Piping Layout and preparation of Support schedule, Support sketches, MTO preparation for revamped lines and stress analysis on CAESAR-II for critical lines. Did design calculations such as minimum pipe wall thickness as per ASME B31.3.

Also, Got an exposure to bid (technical and commercial) preparation and evaluation work in material management department during job orientation period.


Appeared in IELTS on 25.03.2017 (General Training) Test (conducted by British Council) and scored 6.5/9 bands



“Best Reader Award” 2011-12 at Knowledge Resource Center, UPES, Dehradun CO-CURRICULAR ACTIVITIES

Served as a member of UPES Petrotech Chapter for the academic year 2011-2012. COMPUTER SKILLS

MS-Office, Autocad-2012 (2D & 3D), CAESAR-II4.5 version, PDMS, MS-Project, Naviswork PERSONAL DETAILS

Date of Birth (DD-MM-YYYY) : 18-10-1980

Father’s Name : Sh. Chander Kishore Kumar

Mother’s Name : Smt. Vidya

Gender : Male

Nationality : Indian






Write (Beginner/Proficient/


Speak (Beginner/Proficient/


English proficient proficient proficient

Hindi proficient proficient proficient

Punjabi proficient proficient proficient

Mobility : Ready to work anywhere in India/Abroad

Hobbies &

Interests : Reading Oil & gas magazines, Listening songs and light music, swimming, internet surfing. Passport No. : N4771776

Date of Expiry

(Of Passport) :18.11.2025

Skype ID : pradeep.kumar19802003

I declare that the details above are correct and true to the best of my knowledge. Pradeep Kumar

Contact this candidate