Curriculum Vitae

Position Applied: Maintenance Engineer

Objectives

A qualified mechanical engineering professional working as Mechanical Engineer and offers 15+ years’ experience in the GCC in the oil & gas industry.

Name: Adnan Mehboob Awan

DOB: 18-03-1984

Sex: Male

Nationality: Pakistani

Work: 009**********

Email: adrlsv@r.postjobfree.com,adrlsv@r.postjobfree.com

Computer Literacy: MS Office (Excel, Power point, Word)

Permanent Address: Islamabad, Pakistan

Currently Address: Dukhan Oil field Qatar Energy, Qatar

Passport Expiry Date: 16 May 2022

Marital Status: Single

Education

Bachelors Degree in Technology- Mechanical Engineering University of Engineering & Technology. Lahore Pakistan(2004)

Diploma of Associate Engineer- Mechanical, Punjab Board of Technical Education Pakistan (2001)

HSSC (Pre-Engineering) Federal Board Intermediate & Secondary Education, Islamabad Pakistan(1998)

PROFILE OVERVIEW

Domain kknowledge and experience with traditional drilling practices and well control

Strong technical and operational knowledge of Secure Drilling Services, procedures and practices

Proven track record of hauling and repair of Caterpillar engines, 3512 B, D399, and D398, 3412, Varco TDS 3, TDS 9S,TDS 11SA Top Drive. Canrig Top drive model 1275AC, Tesco EMI 400 Top drive, National Drawworks 110-UE, 1320-UE, Ideco Drawworks E-3000, Oil well E-3000, national mud pumps 12-p-160, Ideco Mud Pumps T-1300, Continental Emsco 1600, National 1700 Mud Pump, Ingersoll-Rand SSR2000 Air compressor, Carrier Air Conditioning Compressor, Dune Air Conditioning Compressor, Seawater to Sweet water maker, & many more equipments relating to onshore and offshore drilling rigs.

Demonstrated competency to carry out investigations, analysis, & over haul of Continental Emsco 1600, National 1700, National 12-p-160 Mud Pumps.

Specialized skills to over hauled Ideco E 3000, Oil well E 3000 Drawworks and other equipments.

Technical capability to understand, troubleshoot & repair hydraulic systems & associated equipment like hydraulic winches, hydraulic hoists, hydraulic cylinders, hydraulic power tongs, BOP & BOP Control Unit.

Proficiency to carry out major overhaul of drilling equipment like drawworks, mud pumps, rotary, crown block, travelling block, top drive, dead line anchors etc. with overhaul experience on at least three of these equipment as Maintenance Engineer.

Extensive hands-on experience of troubleshooting & repair of all type of mechanical equipment that include air compressors, vacuum compressors, agitators, centrifugal pumps, air hoists, cranes British standard BS7121 series, slinger banks man, rigger, forklift, rig vehicles.

Deft in creating a safe work environment

Outstanding communication skills to liaise with internal or external stakeholders

Manage teams & drive efforts to prioritise on jobs to complete within the time limit.

Servicing and repairing the all slickline tools. Coordinate with whole crew for any kind of maintenance and managing yard responsibilities in daily basis. Incharge of all trucks and units service, Arrange all the equipment and send to maintenance workshop. Coordinate with mechanics and electrical team for all pm plans.

Responsible for all LTV & HTV third party vehicles. Check all the third party certificates and arrange duties accordingly to daily schedule.

Arrange the workshop, Order parts, Handling operation troubleshooting in the field.

Core Competencies include

Overhauling & Repair oil & gas drilling rigs- Time management – Maintenance of onshore & offshore Rigs- Quality Driven- Preventive Maintenance – Safety- HSE & Review- Team Leadership

PROFESSIONAL EXPERIENCE

Halliburton Worldwide Company, Doha, Qatar

Slickline Maintenance Supervisor, Dukhan oil Field, Qatar Petroleum. ( Dec 2019 To Till Date )

Venture Gulf Company, Doha, Qatar

Site Supervisor Halliburton & Schlumberger Projects, Dukhan Qatar Petroleum Field. Qatar (Jan 2018 to Dec 2019)

Responsibilities:

Develop maintenance procedures, schedule, and plan and ensure implementation.

Setup and implement computerized maintenance management system.

Setup up annual maintenance plans for various rigs and units, Crane’s.

Follow up and report progress of maintenance execution and various KPI(s) for preventive and corrective maintenance compliance.

Follow up repair progress of critical equipment failures.

Support team to trouble shoot operational equipment failure and reduce non-production time

Perform equipment failure analysis and reporting.

Management of critical spare parts and availability.

Perform maintenance management audits.

Run improvement projects related to overall maintenance management.

Manage team of mechanics day to day operation and enhance efficiency of PMS.

Familiarize himself with the AOS Safety Policy and take all reasonable care to ensure the health and safety of himself and persons likely to be affected by their acts or omissions, as required under the Health & Safety at work.

Works in a manner that insures personal safety and the safety of fellow employees.

Strives continuously to develop a greater knowledge of the positions held within the department.

Investigates accidents and prepares reports for insurance carrier. Coordinates Safety counselling meetings.

NNest Metals Company, Accra Ghana. West Africa

Maintenance Engineer, (April 2017 to Jan 2018)

Nabors International Drilling, Saudi Arabia

Chief Mechanic, (Jan 2015 to March 2017)

Responsibilities:

As Chief Mechanic, coordinate with workers to maintain and repair mechanical, plumbing, ventilation and other related to maintenance systems at Al-Khurais Oilfield, KSA as per the defined Key Performance Indices-

Oversee measures to develop and implement maintenance procedures and maintain personnel records.

Evaluate problematic systems or facilities, determine root cause, and suggest appropriate remedy.

Verify need to perform installation or repair services.

Plan manpower allocation, supervise hire workers, organize schedules and assign work activity.

Perform training to ensure individuals have all the requisite skills.

Maintain inventory of tools and workers available for hire as well as record work progress

Supervisors building management on budget development

Design training that covers equipment, techniques & procedures to build various systems.

Review and assist employees with related administrative and human resources issues.

Engage in maintenance related duties including perform the initial evaluation of building systems.

Check pending work & distribute work assignments.

Evaluate each worker's performance to ensure quality operations

Spearhead efforts to investigate accidents and prepare relevant reports.

MB Petroleum Services LLC, Oman

Workshop Supervisor, (Sep 2012- Sep 2014)

Responsibilities

As Workshop Supervisor, carried out tasks on the rig, from a technical, equipment and safety aspect in Khazzan oil Field, Oman, for all secure drilling services operation as per the specified Key Performance Matrices

Ensured completion of daily preventative maintenance as per the checklist.

Tracked all equipment to keep them functional while submitting for repair, if required.

Ensured that green tagging in the shop is completed prior to mobilization.

Was responsible for making sure equipment is functional and inventory lists complete before sending equipment to location as well as green tagging manifold.

Interacted with 3rd party service providers on the rig, such as the mud loggers, Mud Company, MWD and directional services, among others.

Trained and mentored crew members while on the rig site.

Participated in pre-and post job meetings with the clients

Conducted safety meetings on the rig & adhered to all QHSE procedures and reported any incidents

Accomplishments

Played a major role to set up robust maintenance process to achieve remarkable performance level.

Burgan Company for Well Drilling, Kuwait

Chief Mechanic (Apr 2011- Jul 2012)

Responsibilities:

As Chief Mechanic, handled operated at the onshore rig 142, as per the set Key Performance Indicators-

Interfaced with specialized departments, such as transport and mechanical, and fabrication facility, which manufacture porta-cabins used at the rig sites to accommodate drilling and rig crew.

Managed machining services, equipped with bays, lathes, boring machines, milling machine, shapers, valve repair and testing equipment, grinders, welding and cutting machinery, and warehouse storage,

Undertaken repair and manufacturing services of down hole tools, such as cross-over, subs stabilizer, flat bottom mills, wash over shoes, taper mills and pup-joint, double studded adapters, spools, flanges, and nipples used in drilling.

Accomplishments:

Made significant contribution to effectively lead team within estimated timelines.

Rowan Drilling Company (Offshore), KSA

Chief Mechanic (Mar 2008- Jan 2011)

Responsibilities:

As Chief Mechanic, engaged in steps to eensure proper maintenance of equipment, observed safe work practices, & inspected completed work as per the defined Key Performance Matrices-

Maintained vigil to assess condition of the mechanical components during normal operations.

Planned & executed an active preventive maintenance program to minimize equipment downtime or unsafe situations.

Diagnosed and supervised repairs on malfunctioning of all types including diesel and gasoline engines, rig draw works, power end of mud pumps, air compressors, transmissions, & related equipment to assure continuity of operations.

Conducted safety and housekeeping checks to ensure observation of proper practices as per the SOP.

Advised rig foreman and crew members on the proper care and operation the equipment in use.

Supervised subordinates and directed craftsmen on loan from the drilling equipment maintenance division of rig.

Performed pipefitting, plumbing, welding, building craft activities on the rig or residence facilities.

Established work priorities & provided drawings or sketches as required.

Carried out on the job training program for company employees undergoing mechanical, and welder training.

Supervised and monitored hydraulic crane activities and the operators.

Developed requests and verified receipt of material.

Accomplishments:

Successfully prepared & maintained up to date maintenance records on all rig equipment & effectively scheduled work relating to project management programme in the most efficient & least disruptive manner.

Great Wall Drilling Company, Pakistan

Chief Mechanic (May 2005- Mar 2008)

Responsibilities:

As Chief Mechanic, handled repair & maintenance tasks for engine, electrical, mechanical, transmission, power train, fuel system, suspension systems among others as per the defined Key Performance Parameters-

Overseen maintenance, repair, testing of generator & replaced engine oil & other fluid as per given periodic schedules

Provided feedback to the Manager & seniors.

Evaluated performance of generator mechanical functional monitoring.

Accomplishments:

Helped deliver performance in the field of exploration, drilling and production of crude oil and gas

Previous Employment Record:

Rig Mechanic, Oil & Gas Exploration Company CRACOW Ltd., Karachi, Pakistan (Nov 2004 – May 2005)

Trainee Mechanical Engineer, Pakistan Oil Field Ltd., Rawalpindi, Pakistan (Jun 2003– Sep 2004)

Role: Conducted repairs & operations as per given periodic schedules, that included engine, electrical, mechanical, transmission, power train, fuel system, suspension systems as well as generator maintenance repair, testing- engine oil & other fluid replacements

PROFESSIONAL DEVELOPMENT

Nebosh International General Certificate in Occupational Health & Safety. (2014)

Underwent in house training on HSE Leadership Star/ CS inspection/gas testing at Nabors International Drilling (2015)

Diploma in Hardware & Application, National Institute of Science & Technical Education, Islamabad

Technical Certification programme on basic & troubleshooting of Caterpillar Diesel Engines

Undergone offshore chopper training under deep water (2008)

Completed HSE certification courses on medical first aid, H2S awareness, lifting & handling of equipment, helicopter safety course, PTW course, fire fighting, confined space, & weight lifting

Attended drilling top drive workshop.

Languages

English

Arabic

Urdu

Hindi

Punjabi

Basic Persian

African Ghanian

Basic Chinese

Contact this candidate