Production and customer service
Resume:
Kent James Ivo
Manufacturing/Production
I am a dedicated hard worker who brings out my best for the company. I have strong integrity, and great communication skills, as well as strong leadership skills. I have strong customer service skills and I get along well with others. I am always prompt and prepared, and bring a positive attitude to the work place. I am a quick learner who takes pride in my workmanship. My production value is an asset to this company as well as my drive to complete any assignment.
12117 prospect ave NE
Albuquerque, New Mexico
87112
************@*****.***
Experience
Frames
Adobilite
10/1/2020 - Present
My job duty includes steel meshing fireplace frames. I measure and cut the mesh to form over frames and then screw on the mesh for the stucco to adhear to form shape. Other jobs include meshing iron doors and performing a cutlist of pipe for the welder to create fireplace frames. Other duties include inventory on frames. Electric Assembly/ Programming
Transcore
10/01/2019 - 03/02/2020
Assemble green boards for pocket pass and fdot highway toll booths. This job has many functions and different assembly line tasks. Jobs include depaneling green boards, programming green boards, doing a manual test to see if it passes qc test. Next stage is to insert green boards into cases and finally have them tested as a whole to make sure all functions are working properly. There is a production standard required on every shift and is a fast paced environment.
Technician
Ty Garments (Adidas) (Manpower Staffing)
5/28/2018 - 10/15/2018
My job here was to repair all production machines when they had failures. The machines I repaired required great eye sight and concentration due to its small components to make them work precisely. Other job duties were minor maintenance repairs on the warehouse and forklift driving. Palletizer/Production
Useful Products (Remedy Staffing)
12/1/2017 - 3/19/2018
This job was a printing press operation which printed medication cards to be used for patients and customers. My job duty was to take the full boxes of cards and roll them down on a roll table unto a weight scale, and add or subtract an equal amount of cards required for the shipment (1000 a box). When the task was completed, I placed a label on the box with a time and date stamp, and stacked them on a pallet with assisted hydraulics. This job required speed and accuracy due to the fast flow of the printer. A typical day would end in around two million cards per shift.
Transformer Stacker/Electronic Assembly
Stored Energy Systems (Resource MFG)
4/26/2017 - 8/22/2017
My job here was building transformers for the power cabinets for the production line. Duties was to solder end caps on the transformers, as well as stacking the transformers to a certain required measurement, then build the cabinet brackets around the transformer. After the process was complete, we then dipped these transformers into a containment vat with finish overnight. My other job was to assemble the green boards inside the power cabinets which involved a step by step instruction on the production screen. The end result was the mother board to run the power cabinet.
Quality Control
Allegion (Remedy Staffing)
12/2/2016 - 4/22/2017
My job duties here was to deconstruct old lock stock from the production lines which involved using many hand tools to take them apart. After upon doing so the next phase was to separate the electronic components as well as brass, steel, metal, and aluminum into separate bins for salvage. Other duties I performed was to do quality checks on new locks coming from production line. Quality Control Technician
Precision Industries (First Call Staffing)
7/1/2016 - 10/1/2016
My job here at precision industries was to work as quality control on second shift. Job duties include working in a lab type setting. My position required me to check all specifications on incoming car parts that came off the machine press. Tools being used to measure were caliper, micrometre, and height gauge tools as well as many hard gauge testing tools. Other duties include running CMM CNC on lab computer to check micro measurements on new parts. Excellent communication skills were required to assure proper quality checks were being performed. If any specs were out of line my job was to stop or start production and to get with the night supervisor to explain situations. All paperwork was required to be finished at every shift's end. Hydrolic Lift Assembly
S.R. Smith (Sumner Employment)
4/1/2016 - 6/25/2016
Job duties here include having to assemble hydraulic lifts and hubs with pneumatic tools which required me to follow procedures in assembly layouts and blueprints. Other job position were to set up water slides, and to insure that the slides were waterproof for shipment to europe. Electronic Assembly/Programmer/Shipping
Interlock Systems
8/11/2014 - 2/26/2016
Worked for interlock systems starting in the shipping and receiving department. My job duties were shipping of handheld devices for customers throughout the United States. This job demanded accuracy and orders to be done in a timely fashion. Other duties were to help out with loading and unloading UPS trucks at the start and end of each shift.
After a while I started to be trained on assembling home monitor units which consisted of downloading firmware/format, and to program Bluetooth technology on the cloud device. Job duties required soldering and installing cameras in the unit. I was required to build these machines from scratch or perform a rebuild. Production
Technical Molded Products
1/12/2010 - 6/1/2014
Supervised automated plastic injection mold machines. The job duties were to place tag shots out of the machine in a timely manner, and to prepare the product in boxes for shipment. This position required accurate paperwork and timing to be efficient. My other job duties included to run the CNC laser printer for burning in logos or code numbers on the tags, as well as running a hot foil stamp carousel printer and auditing. Education
Student
Bloom Trail High School
8/24/1994 - 5/16/1998
Graduated in 1998 at Bloom Trail High school in Chicago Heights Illinois. Skills
I worked at a cabinet company for six years building cabinet doors, as well as wainscoting, and running trim through molders. This position required me to learn multiple woodworking machines as well as a slider saw. Other duties included cabinet assisted assembly, and cabinet delivery, as well as working the finishing department. That position required me to run an orbital sander and to spray finish, and a final coat on doors to be installed in custom kitchens. I also have forklift experience and have a valid drivers license and a clean driving record. Other experience I have include truck/trailer driving (24 ft to 40ft). In addition I have worked customer service for five years in the food industry as well as two years clerk experience at a gas station as an opener.
References
Bill Young (Technical Molded Products) 970-***-**** Robyn Vossen 505-***-****
Cale Grosclose 970-***-****
Daryl McMahon 708-***-****
Contact this candidate