Electronic Technician Test

Tin Doan

**** ****** **, ********, **. *****_Email: ********@*******.*** Cell: 408-***-****

Qualification Profiles

Seeking a challenging and responsible General Test Technician, Systems Test Analysis, Electronic/Mechanicals Test of Semiconductor Industry position that will be fit my practical skills experiences as High-Volume Manufacturing, a dependable and conscientious hard worker. Capable of increased responsibility with minimum supervisor. Effective working with Engineering's as Researching and Development (R&D). work efficiency in fast paced environments. Knowledgeable in Statistical Process Control. and make improvements follow up company rules.

Professional Summary

* Test and set-up test equipment’s * Families with all small hand tools/Electrics tools & Air tools

* Maintenances the test systems * Verifies parts defected the BOM from stockroom providers

* Systems, Sub-Assemblies Builds and test on Production * Understood Small Hand tools & Electric tools as well

* Electro Mechanicals experiences * Performances all test database and reports

* Hardware & Software troubleshoot failures devices * Follows Blueprints, Schematics, MPI Documentation

* Motivate hardware lab debug methods * Maintain lab hardware and test equipment’s

* Introduction to current electronics technology * Power Supply set-up AC/DC - DC/DC converter

* Systems configures HW / SW installation * Locate, test, and configure hardware for demo/test

* Updates and Upgrades new SW version * E/M builds, Test integration, CVD,CMP wafer systems

* Collected database saver in main servers * Followed and make solution ECO as requirements

* Functional & Optional test performances * Servers and Network setup high quality

* Proficient in Windows PCs, XP, Mac, 7,8 Linux, OS * Strong customer services orientation

* Microsoft Words, Excel, PowerPoint * Work with Engineering Team

* Perform wafer's systems of industry semiconductor * Perform test and troubleshooting Robots

Experience

Cepheid Corp.

Automation Technician

10/25/2021-Currently. Sunnyvale. CA

* Performs builds, ROBAL Systems, Liquid Cart, Heater enclosure, Flex I/O, HMI enclosure

and all sub-assembly follow E-Drawing, documentation and create equipment critical parts Bill of Materials (BOM) lists.

* Onsite servicing, modification follow instruction and rework, repairing by requested on time, recalibration of the

company products. diagnoses mechanical, hardware, software, AC/DC analysis and systems failures using established

procedures. Understand and adhere to safety policies and practices and provide administrative and logistics

support for system maintenance and parts procurement.

* Diagnoses mechanical, hardware, software, and systems failures using established procedures, determines most

cost-effective repair/resolution to minimize customer down-time.

* Performs batch records' completion processes, troubleshooting of Cepheid instruments following approved

procedures, and provide clear and concise, documentation for all work in accordance with company procedures and

requirements, also record depot order activities in company systems (SAP) proactively participates in the quality

systems and quality improvement as directed by the Manager.

* Comply with ISO requirements and maintain effectiveness of the quality management system.

* Work with Engineering team to complete accurate service records both mechanical & electrically and manually.

directed by the Lead or Manager.

R&M USA Inc

Senior. M/E-Technician

Fiber Optical Technical Support

07/2016 –04/2020. Milpitas, CA

* Performed builds and test all prototype Cabinet Boxes Fiber Optical in Engineering Lab

* Responsible to test optional Fiber Optics spools by Kilometers, and apply labeling as requested

* Performance test equipment's from FILTEL Model as: S177, S123-M12 Ver.2, M200/ M210 OTDR (Optical Time

Domain Reflect meter) Models S218R, Stripper/ S323 Fiber cutter

* Followed W/O and customer instruction details to complete units on time requirement

* Engineering Change Order (ECO) and figure out problems issued, outgoing services

* An established fiber optic communications supplier.

* Responsibilities repair of electronic and mechanical equipment in Lab Room, followed

manufacturing instructions.

* Repair and calibrate fiber optic fusion splicers and cleavers also Ability to use various

mechanical and electronics tools and diagnostic test equipment

* Use of fiber optic fusion splicing tools and test equipment on cable assemblies.

* Build-out/assemble rack or wall mount fiber optic cable patch panels

* Perform fiber optic cable, installation, polishing unit work both in-house and on

the field, Ideal candidate would preferably have the following:

* Troubleshooting and problem-solving skills/Capability to read schematic diagrams

CTS - EMS Corporation

Senior. E/M &Test Technician Specialist

05/2010 - 01/2015. San Jose. CA

* Perform test Thermal Chamber, Burn-in as LRU Boxes of BAE Modules for Military tanks.

* Verification failure test equipment’s installed and upgrade new software version.

* Responsible updates Firmware, Devices Programmer, and flashlight by CLPD - EMP 21 of techniques.

* Test various types of (General Purpose Input, Output) GPIO/FPGA (Field Programable Gate Arrays)

and all cable harness a Bradley Military Random Cirri's Software of BAE (Base Aerospace Engineering)

* Performs Equipment) and FTV (Function Verify Test) Method Military Units standard.

* Test and verify and discrete Input/Output voltage of DC/DC converter and analysis AC/DC power supplies.

* Responsibility for all First Article as qualification and write completely documentation for customer.

* Performs test AC convert DC of LRU. Boxes, PC’s Boards, Logic Modules, power modules.

* Test and rework RMA and production, provides test results and write in root case.

* Performs test and complete order on time and completion of appropriate rounding paperwork

* Troubleshoot/debug down to components level followed customer schematic and diagrams.

* Performance Builds and test and supporting for AMD/SM servers network systems high volume technologies

* Performs configures, reconfiguring servers’ systems hardware / software, test and analysis on manufactured

* Responsibility setup test equipment sand follow up customer test procedures, maintenance the test systems

* Test and evaluate computing servers collected data's and provides test results

* Perform troubleshoot hardware and software issues to maintain productivity and ATE tester operation

* Ability to apply new test Software, update/upgrade all details as customer requirements

* Debug and troubleshoot PCB's high to Low level systems failure devices by

Xilinx Firmware reloaded Complex Programable Logic Device (CPLD)

* Perform ongoing hardware for engineering to accomplish testing

* Team-oriented and skilled in working within a collaborative environment

* Able to reads: Schematics, Blueprints, Block Diagrams, MPI, BOM and test Procedures.

AVIZA Technology

Senior: E/M & Wafer Systems Test Technician

06/1998 - 05/2007. Scotts Valley, CA

* Able to assist in the selection and set-up of specialized test equipment’s and test perform CVD wafer's

200mm & 300mm models.

* Perform test and verification new product introduction of electro-mechanical, software controlled

* Electro Mechanicals assemblies and/or final systems Build tests and troubleshoots

* Prepares technical reports summarizing findings and recommending solutions to technical problems

* Responsibility evaluation in support of the company's complex semiconductor capital equipment and systems

* Performing complex RF measurement equipment, Power Meters, Network and Spectrum Analyzers, etc.

* Configures system settings and options; executes unit integration and accomplish testing

* Maintain the defected - tracking database and development deliver failure analysis reports.

MICROBAR Incorporation

Senior: E/M &Wafer Systems Test Technician

03/1993 - 04/1998. Sunnyvale. CA

* Performed system test Digital/Analog low and high voltage electrically controller.

* Set- up operate standard equipment and test AC/DC - DC/DC Upper Electronic controller and Lower

power supplies box’s, also configures. Test, troubleshoots, analysis Robotics for Chemical Vapor Disposition

(CVD)&Chemical Merchandise Polisher (CMP) Wafer Systems.

* Performs timing robots test by Micro Software in clean room of Wafer Cleaner systems of Applies

Material with 200mm/300mm models., also Brush Modules, Programmable Logic Controller (PLC) Slurry Liquids Draw

(SLD) Robots Arm and Leak Check.

* Stronger follow up test procedures, test and verifies wafers in boxes in chamber, and collected database's

* Performs capability under various operation condition of improvements, work closed with customer

* Responsible to support critical for new productions issues and ensuring to production meet customers

* Performs system test Digital/Analog low and high voltage electrically control and special purpose test

* Performing modification, timing test Robots by MS Software, followed customer test producers.

Education

* Diploma - General Education

Harcourt High School of Scranton, PA

* Electronic Technician

Union District Cupertino of Santa Clara, CA

* RF - Technician & Electronic Engineering Technician

International College of San Jose, CA

Personal

US Citizen

Work hard, lean fast, independent work and easy to inter team works.

Good communication, and team play.

Furnish Upon request.

Contact this candidate