CURRICULUM VITAE

Mechanical Engineer

AZHAR SHA RAOUF Email:adrasn@r.postjobfree.com

Sr.Mechanical Engineer (QA/QC, Estimation/Tendering) Mobile No: 050******* Certified CSWIP 3.1, B.GAS LEVEL 2

ISO LEAD AUDITOR 9001:2015

ASNT NDT LEVEL 2

OBJECTIVE

To be part of a growing and progressive organization; where I can best utilize my experience, education, capabilities and skills towards accomplishing the goals and objectives of the organization with sincerity and dedication. EDUCATION QUALIFICATION:

B.Tech (MECH) Engineering from Jawaharlal Nehru Technological University. PROFESSIONAL EXPERIENCE:

14 years of experience in QA/QC, Estimation & Tendering.

MECHANICAL Estimation & Tender Engineer,SSEM

Sr.QA/QC Mechanical Engineer, TUV AUSTRIA

MAADEN QA/QC ENGINEER PROJECT MANAGEMENT TEAM

(PMT) Consultant

ARAMCO APPROVED QA/QC (RASTANURA REFINERY)

SADARA APPROVED QA/QC (TECNIMONT ARABIA)

ARAMCO APPROVED QA/QC (WASIT GAS PROGRAM)

SATORP APPROVED QA/QC (SATORP)

ARAMCO APPROVED QA/QC (NORTH PARK,DAHRAN)

GULF HEAVY INDUSTRIES QA/QC ENGINEER

JGC ARABIA QA/QC ENGINEER (NCP NORTH )

BHARAT QUALITY ENGINEERS QA/QC ENGINEER

(Good Knowledge of ARAMCO Standards) (Aware of MAADEN Specs

& Standards)

TRAINING & CERTIFICATIONS:

Certified CSWIP 3.1 Welding Inspector, TWI Cambridge, U.K

Certified B.GAS Coating Inspector, TWI Cambridge, U.K

Certified ISO Lead Auditor 9001:2015 INTERTEK, IRCA

ASNT NDT Level -- II certification in the following methods:

Dye-Penetrate Testing

Magnetic Particle Testing

Radiographic Testing

Ultrasonic Testing

Diploma in Project Management Professional (PMP)

Diploma in ORACLE PRIMAVERA P6

Knowledge of International Codes & Standards:

ASME section B 31.1, for power piping

ASME section B 31.3, for process piping

ASME section V for NDT Examination

ASME section IX for Welder Qualification & Procedures. ASME section-II part for specification of electrodes & fillers, COMPUTER PROFICIENCE:

Operating System : MS-Dos/ Windows 98/2000/XP/Vista/2007 Packages : MS-OFFICE, MS-EXCEL, MS-WORD.

EXPERIENCE:

Projects : (Multiple projects)

Client : NEOM, MEWA, SWCC, RC.

Company : SSEM

Designation : MECHANICAL ESTIMATION&TENDER ENGINEER Duration : APRIL 2021 TO till date.

Projects : RIYADH METRO (Multiple projects)

Client : RIYADH METRO.

Company : TUV AUSTRIA

Designation : Sr.QA/QC MECHANICAL ENGINEER

Duration : SEP 2017 TO OCT 2020.

Project : NGL DEBOTTLE NECKING,

SEED FILTRATE HYDRATE,

SUMP PUMP DISCHARGE PIPING,

Loading rack facilities, HP-LDPE Project,

Wasit gas program

Client : SAUDI ARAMCO,

MAADEN ALUMINIUM COMPANY

Company : MGC Engineering.

Designation : QA/QC Mechanical Engineer

Duration : JAN 2012 TO SEP 2017.

Project : (JUBAIL EXPORT REFINERY PROJECT)

Client : SATORP

Contractor : MRK

Designation : QA/QC Mechanical Engineer

Duration : MAY 2011 to MAY 2012

Project : NORTH PARK OFFICE COMPLEX

Client : SAUDI ARAMCO

Designation : QA/QC Mechanical Engineer

Company : AL YAMAMA

COMPANY : GULF HEAVY INDUSTRIES

Designation : QA/QC Mechanical Engineer

Duration : OCT 2010 TO MARCH 2011

Project : NCP NORTH.

Position : QA/QC Mechanical Engineer

Contractor : JGC ARABIA

Duration : MAY 2008 TO AUG 2010

Company : BHARAT QUALITY ENGINEERS, Hyderabad, INDIA Position : WELDING/NDT Inspector

Duration : NOV 2007 TO MARCH 2008.

ROLES AND RESPONSIBILITIES: MECHANICAL

ESTIMATION&TENDER ENGINEER

Perform detailed calculations to compute & establish manufacturing specifications.

Check quantities of tender BOQ & compare with his takeoff quantities from the drawings.

Prepare and send for RFQ from suppliers and sub-contractors as per render requirements.

Preparing tender prices as per bill of quantities, drawings and specifications.

Direct and coordinate manufacturing support, documentation and testing activities to ensure compliance with specifications and customer requirements.

Prepare comparison between supplier and sub-contractor to request for rock bottom prices.

Updates estimates, schedules, reports, and documents based on revisions and changes to the project.

Prepare the estimates, cost reports, schedules, budgets and change orders.

Developing accurate and clear project cost estimate based on project data. ROLES AND RESPONSIBILITIES: SR.QA/QC MECHANICAL

ENGINEER

Review and approval of contractor’s Project Quality Plan (PQP).

Review of Project Scope of Work and Project Specifications

Review and approve the CV’s and test the ability of the contractor’s quality personnel.

Review and approve the contractor’s final Quality dossier after the completion of the project construction phase.

Audit the contractor’s quality of the work and documentation during construction phase at different stages.

Highlight the punch item during the pre start safety review (PSSR) walk down along with project management team (PMT).

Review & Approve of Method Statements, QC Work Procedures Inspection and Test Plans for Contractors.

Review & Approve of Welding Procedure (WPS) as per code & MAADEN requirement.

Material receiving inspection at site as per the MAADEN requirements & specification.

Ensure implementation of Quality Control Plans and procedures from each Contractor.

Ensure that Inspection / Testing equipment’s at site are with valid calibration.

Co-ordination with PMT construction for daily welding activities by stage wise to execute the project in smooth manner.

Prime responsibility is adopting Quality standards & procedures on fabrication shop and job site, coordinating and assigning inspectors according to the site inspection requirements.

Assessment and review of welder repair rate on weekly basis and maintain welder continuity.

Attending the meetings with Contractors, Sub contractors to resolve construction and Quality related issues.

Giving the suggestion for small problems at site and identifying the engineering issues, communicating with Construction & Engineering department for resolving the same at earlier stage.

Ensure that pipe supports that has been installed as per IFC and support drawings.

Line checking as per drawings and P&ID requirements to ensure completeness and accuracy of piping system as per code and project specifications. In addition, to incorporate the punch list with category A&B items.

Witnessing of Flushing, Air blowing and Hydro test as per Project specifications.

Monitoring the QA/QC documentation for contractors and ensure that all the activities are incorporated to their system on daily basis and can be traced.

Issuing NCR to the contractor when non conformity activities are noticed.

Conduct and coordinating walk through for each piping system completed, verification of closed punch items prior to Mechanical Completion acceptance.

Review of welding procedures specification (WPS) and procedure qualification record

(PQR). Coating and painting application quality work procedure, coating applicators id cards.

Review of Method Statements, Inspection and Test Plans.

Ensure implementation of Quality Control Plans and procedures.

Ensure that approved WPS are followed & review of daily inspection reports.

Ensure that Inspection / Testing equipment’s at site are with valid calibration.

Reviewed calibration of welding machines, baking and holding ovens quivers, and inspection tools.

Material receiving inspection at site as per the client requirements & specification.

Implementing welding procedures as specified and qualified, and that the welding is performed as per applicable procedure.

Checking and monitoring the associated parameters (current, voltage, travel speed, and heat input) as per applicable WPS.

Witnessing of hardness testing of the Materials as per project requirements.

Controlling the welding of joints according to Project controlled Drawings and Checking Diameter, Thickness, Drawing Number, & Class in welding Progress report.

Monitored in-process welding parameters such as ampere, voltage, travel speed, heat input, weaving, preheat & inter-pass temperature requirements.

Reviewing filler wires and Electrodes of welding procedure Specification according to ASME Section II Part C & also, checking while welding Inspection.

Selecting the joints for percent Radiography based on welder’s performance & Visual inspection of Joint.

Witnessing of bolt tightening inspection as per torque requirements specified by the client requirements.

Witnessing the cementitious fire proofing inspection as per the project requirements.

Receiving inspection of coating material and blasting material prior to application.

Review of material safety data sheet as per project requirements.

Witnessing of abrasive blasting prior to coating application as per the project specification.

Witnessing of primer, mid coat and final coating inspection as per the project specifications.

Review and approval of the contractor’s quality documents.

Review of final QA/QC dossier submitted by the contractor.

Witnessing of NDT inspection such as PT, MPT and UT of the welded joints.

Review and approval of NDT reports submitted by third party.

Witnessing of stud bending test as per the project requirements.

Checking of pump pre installation.

Inspection of nozzle arrangement.

Inspection of shaft alignment without load and solo run.

Inspection of nozzle alignment with pipe.

Checking the survey report with civil QC clearance.

Inspection of steel structure material such as beams and columns.

Inspection of steel structure such as dimensional verification, galvanizing and coating inspection.

Inspection and witnessing of leak proof test of FAÇADE material.

Inspection and witnessing of pull out test of bolts.

Final inspection of assembled steel structure material before installation. Key Skills

Familiar with Welding & NDE techniques (RT, UT, MT, PT)

Familiar with Coating/Blasting Techniques.

Well conversant in isometric & engineering drawings.

Confident communicator and self-motivated.

Knowledge of API 1104

Knowledge of Welding Process SMAW, GTAW, GMAW, SAW, FCAW. PERSONAL PROFILE:

Name : AZHAR SHA RAOUF

Mobile # : 009**-*********

Email Id : adrasn@r.postjobfree.com

Nationality : Indian

Age : 35 years

Marital Status : Married

Language : English, Arabic, Hindi, Urdu

Iqama Status : Transferable

Driving License : Valid (KSA)

Contact this candidate