Aramco Electrical Engineer
Resume:
Cover Letter
RE: Electrical Engineer,
Dear recruiter,
I am a motivated professional with leadership proficiency and extensive Lead Electrical Engineer experience over more than 13 years in Oil & GAS industry and Energy Section. Recently, I learned of an opening for the Electrical Engineer role and I was compelled to contact you with my interest. I believe that my professional background and industrialist drive make me an ideal candidate for this opportunity.
As a person who thrives in high-pressure and fast-paced situations, I strive for positive results through the application of my abilities in Electrical system installation and commissioning. Additionally, I possess expertise in electrical system operation and maintenance and an aptitude for optimizing performance and motivating colleagues. In any position, I am able to visualize success and identify innovative and effective strategies for achieving it.
I have artfully balanced workplace objectives and productive relationships, inspiring strategies and insightful suggestions to achieve a competitive business edge. My delegation and critical thinking strengths have enabled my professional growth.
I have enclosed my resume for your review. I appreciate your time and consideration of my candidacy to become your new Electrical Engineer.
Sincerely,
Sarek Seikh
Career Objective:
I am seeking for a long term career position with a progressive organization where my personal competence would enable me to make a momentous contribution to the growth of the organization, particularly fascinated where my performance will be rewarded intrinsically.
Major Industry Knowledge:
Oil & Gas
Petrochemicals and Fertilizers
Mining & Aluminum
Water & Energy (Power Plant)
Specialization:
Power Generation Unit & Electrical Network System
HV/MV/LV Transformers (Including Operation and Maintenance)
HV/MV/LV SWGR (Including Operation and Maintenance)
LT/HT Motors and aux system.
Educational Credential:
B-Tech/BE -Electrical Engineering from FIEM, WBUT,
GRADE: 1st CLASS, GDPA: 81.2%.
Computer Proficiency:
SAP, Meridium, CAD, Oracle
E3, Pspice, ETAP, PDMS and SP3D, CAPA Module, EDMS, MDRM, ECMS.
C, Operating System, Networking, Microsoft-Office, Automation
Synopsis of Career:
More than 13 years of experience in project engineering (FEED, detail design, project planning and execution) and Plant engineering, Pre-Commissioning, commissioning.
Certification in IEEE and IEC, PMP, etc.
An effective communicator with strong analytical, logical, problem solving, and organizational abilities to manage the technical interface with client, PMT, and EPC consortium partners.
A keen strategist and planner with skills in conceptualizing and effecting process initiatives to enhance project/plant efficiency and productivity.
Adept in selecting and managing the Main Electrical Equipment Supplier (MEES) namely ABB, Schneider, BHGE, Siemens and Eaton during FEED Phase of project including preliminary design review (PDR), critical design review (CDR), FAT and SAT (Testing & Commissioning) of MEES.
Active participation in HAZOP, e-HAZOP, PHSER, 3D Model review, Design Reviews, Constructability study Area classification, plot plan study.
Handled Complex Electro-Mechanical packages (Gas Turbine Generator (GTG), Crude oil pump, charge Pumps, Heaters, etc. from interface and Electrical perspective.
Handled commissioning and startup activities of core electrical equipment (power generation Unit, HV, MV and LV SWGR, HV, MV Transformer, AUX system etc.) including preparation of mechanical completion dossiers, Pre- Comm. dossiers, Readiness of systems, System walk-through, Vendor co-ordination, Integration, Start-ups, Handover and operation support.
Adept in resources planning and handling in Engineering, project Execution including Commissioning and start up.
Preparation of modification Philosophy, schedule and Work-pack for Brownfield modification.
Proficient in managing various Operations as per the set of parameters & standards as well as experience of developing Procedures for operational excellence Ability to handle multi tasks to conceptualize and execute the projects within the time limit with available resources.
Core Competencies:
Extensive knowledge on Project/ Engineering Procedure Manual for Large Scale Project in OIL & GAS.
Highly educated on IEC, IEEE, NETA, CBIP, NEMA Standards & ATEX –Code and certification.
Hands on experience on Computer aided design with Electrical System mainly E3, ETAP, Pspice.
Rich experience in Process plant engineering including (Asset performance Management, Failure Mode Effect Analysis, Root Cause Analysis, Reliability and centered maintenance, CAPEX etc.)
Strong knowledge and Specialization in the field of Electrical engineering related tools and technologies.
Strong background on reviewing the Project / Plant activities for conformity to all Code and Standard provisions.
Immense ability to control and manage the project planning and controls.
Progressive development skills in Technical solutions and implementation of Electrical engineering.
Deep knowledge of Occupational health, Process Plant safety standards and hazardous area classification.
Familiar on stipulated safety rules and regulations in OIL & GAS Industry.
Demonstrating knowledge in Operation and maintenance of plant Electrical equipment.
Excellent written and verbal communication and interpersonal skills.
Organizational Contour:
CCC (Consolidated Contractors Company):
UAE
Feb 2017 to Present
Client ADNOC, DAS Island, UAE.
Role: Lead Electrical Engineer
Projects Handled
1.Nasr Full Field Development project, Phase III.
2.Bu Haseer Early Production Project
3.Power from DAS (PDAS)
4.4 GTG (based on power Generation unit-36.5MW each and 132KV GIS unit)
Responsibility:
3D Model Review, Constructability review, Preparation of Construction deliverables like layout drawings, in-house engineering for LV equipment’s, Review of TDR/EDR, electrical part of planning package.
Reviewing the final documents (Scheme, Wiring and SLD, interconnection, panel schedule, philosophy, FDS etc.) of Electrical systems and equipment to ensure its compliance with the ADNOC standard and project specification.
Resource Planning & management including coordination & technical discussion with OEM, internal & external stakeholders and Leading Engineering team & first point of contact for 3rd parties.
Lead engagement with ADNOC Operations, electrical department, EPC Design, Engineering and Quality groups to obtain full Electrical scope understanding and manage disciplines to optimum design success.
Promote project safe working practices in line with the ADNOC safety management systems.
Over all in-charge for Site Installation, Commissioning & start-up of Turbine Generator Set- AVR System, master control & protection system, 132 & 33 KV-SWGR, 11 KV, 3.3 KV & LV SWGR, MCC, HV, MV Transformers, EDG, SYNC, ECB System, PMS (LMS and GMS) System.
Delegate authority and responsibility within the team, and other stakeholder organizations, including suppliers, OEM & 3rd parties.
Preparing Pre-Commissioning plan & task schedule and estimating durations of each every project activity pertaining electrical system.
Pre-Commissioning, Commissioning and start up:
Lead the team of 12 engineers and 9 supervisors for testing, commissioning and start up activity including vendor (OEM) specialist.
Preparation and Review of test plans, pre-com and com procedures, SAT procedures, method statement for E&I tie-in, OTP (operation and test procedure) for Generator,Transformer, SWGR, EDG, AUX operating system etc. work instructions,
Review and comment for System and sub system list and boundary mark-up.
Subsystem walk downs with cross function team along with clients to verify mechanical completion of system.
Acceptance of punch list items from contractor and assigning it to Cat-A, Cat-B or Cat-C.
Review of Pre-Commissioning & Commissioning dossiers (RFC, RFSU/RFHO) and provide the guidance and support to the project handover team for proper implementation of GDL-006.
Preparation of TRA / JSA for critical pre-commissioning and commissioning and construction activities.
Monitor and manage the timely delivery of documentation, vendor’s mobilization and sub-contractors alignment to complete the SOW as per the given schedule.
Have hand-on experience and working knowledge of Completion Management Systems like ICAPS, ATLAS, and Approvals of ITR check sheet after verification of the activity completion.
Ensure that changes implemented during the Construction & commissioning activities are approved and documented.
Participate in the hand over acceptance of system/s sub-system/s with the Mechanical Completion and Operations group
Create all relevant training tools and develop operation procedure/manuals and provide hard core training for operation and maintenance personal from ADNOC.
Achievement:
Successfully completed 2 major brown field fast track project (BUHASEER & NFFD-PKG2/3 for ADNOC).
Successfully commissioned and startup of 4 GTG unit (36.5MW each) export power to offshore PKG through 132KV GIS network (including establishing testing & Startup procedure of GTGs) during COVID-19 pandemic.
SABIC Affiliate- SAFCO (Saudi Arabian Fertilizer Co.):
KSA
Jan 2015 to Dec 2016
Role: Electrical Specialized Engineer:
Electrical System rated up to 115KV
SFII Urea/NH3, SFIII Urea/NH3, and SFII/SFIII UTY: Centralized Maintenance Department
Responsibility:
Lead Engineer for project execution team for Installation, Commissioning and startup of Electrical Unit rated up to 34.5KV and 115kV-GIS.
Review of OEM proposal, Technical Bid Evaluation, approval of proposed design, drawings, obtain funding for engineering projects or programs related to Capex.
Served as an active member of the Failure Review Board, providing identification of failure root cause and implemented technical solutions accordingly directing maintenance team in day-to-day technical support.
Perform Asset performance and Equipment Critical Analysis, provide feedback for replacement of core Electrical equipment’s.
MOC PKG, EFR, EFAR,FCA/ECA/RCA /FMEA/CAPA, Risk & Life Assessment, Feasibility Study and recommendation,
RCM & APM Study and provide guideline for action plan.
Control and monitor all SAP related transaction: TBE, RFQ, Proposal, placement of order (SO) Invoices etc.
Achievement:
Ensuring Optimized and safe plant operation and Enhancing Operational Reliability
Enhancing maintenance Reliability through Training & Development of Operating & maintenance Personnel.
Control and monitor all SAP related transaction: TBE, RFQ, Proposal, placement of order (SO) Invoices etc.
Member of team for developing Equipment Criticality Analysis (ECA) & RCA as a part of establishing operational excellence in SAFCO, SABIC.
Mentoring several Maintenance Engineers for imparting practical knowledge and preparing them for taking independent responsibility.
NESMA & PARTNERS:
KSA
Sep-2012 to Dec 2014
Client ARAMCO, MAADEN, PCC, Al-Jubail, KSA.
Role: Electrical Lead Engineer & In-Charge
Project: 1. SATORP (With Saudi ARAMCO and TOTAL) 2. Nylon 6.6 (With Chevron Phillips & PCC) 3. MA’ADEN Aluminum Project (with MAADEN)
Responsibility:
Lead the project team for overall field Installation, testing, commissioning and startup of all HV, MV and LV Critical Electrical systems rated up to 115KV (Transformers, SWGR-GIS, etc.)
Involved in SAT.
Plan resource, material mobilization to achieve planned progress in line with approved planning package.
Prepare and maintain the project management plan.
Manage Vendors throughout the project phase and ensuring the project is built within time, cost, and scope constraints.
Provide leadership and analytic support on technical initiatives to successfully execute the site activity related to critical equipment at site.
Co-ordinate with vendor during construction, commissioning and start-up phase.
Take initiate to resolve site technical issues and system modification to meet system operation and control philosophy.
Leads project handover team through reviewing Handover dossiers (MC, RFC, and RFSU/RFHO Dossier) for final submission.
Achievement:
Successfully commissioned and handed-over two PKG unit substation rated with 34.5 KV and RMU unit in MA’ADEN Aluminum Project.
Accomplished the commissioning/start up activity and handed-over 8 numbers of PKG substation (rated up to 34.5KV) and one GIS unit rated up to 115KV in Nylon 6.6 Project.
ABB (MV/LV industrial services):
KSA
May 2010 to Sep 2012
Client ARAMCO, Al-Jubail
Role: Team leader Electrical Testing and Commissioning
MV/LV Electrical Equipment Services.
Project: 1. SATORP (With Saudi ARAMCO & TOTAL)
Responsibility:
Lead Engineer for Installation, Testing & commissioning of HV, MV and LV- SWG, MCC, and Transformer rated up to 34.5KV.
Co-ordinate and lead activities to resolve issues that arise during testing & commissioning phases.
Co-ordinate site activities to achieve progress and implemented measures to optimizing resource utilization.
Achievement:
Successfully commissioned & handed-over two PKG unit substation (1201 & 12010) rated with 34.5 KV in SATORP (JERP project).
SAMSUNG ENG. (SAUDI ARABIA)
KSA
May 2008 to May 2010
Client SABIC
Role: Electrical Engineer-Indoor electrical works
Project: SABIC GAS PHASE –VIII (ASU)
Responsibility:
Lead engineer for installation and Testing & Commissioning of Unit Sub-Station rated up to 34.5KV.
Responsible for resources planning and management including materials and manpower.
Lead all inspection activities for electrical systems throughout substation to ensure efficiency and proper functioning of the equipment
Preparation of MST, other relevant Procedure to conduct the site activities.
I.J.T & ENERTECH & WBSEDCL
INDIA
Mar 2007 to April 2008
Clients: USDPCL, Pune, INDIA
Role: Commissioning Engineer
Project: 60MW thermal power plant project
Responsibility:
Spearheaded as Installation, pre-commissioning and commissioning activities for 60 MW thermal Power Plant including power generation Unit, Boiler, cooling tower, water treatment and feed water system, SWGR, Transformer etc.
Coordinate with the design and development of electrical system installation, commissioning, as required.
Controlled and supervised boilers, turbines, generators, and auxiliary equipment (mainly SWGR and transformer) operation in order to synchronized with the master grid.
Performed advanced engineering and technical tasks in support of power plant operations.
Achievement:
Successfully completed the startup of steam turbine, generator set and integration with nearest 110KV state Grid.
Contact this candidate