ONYANGO DENNIS OMONDI

Telephone: +254-********* Email: adr7s3@r.postjobfree.com

Telephone: +254-*********

PERSONAL PROFILE.

A competent engineer, possessing the ability to provide world class engineering innovations and excellent customer services to a reputable company that will enhance my career advancement. Proficient in working in a very busy, fast paced environment. A team player and a good listener, who can very fast fit into new roles when required to. SKILLS AND ATTRIBUTES.

Electrical design drawing for buildings using AutoCAD

Basic & detail engineering for provision of earthling pits of electrical installation.

Cable size calculation, cable scheduling &its route selection, overhead or underground

Fabrication and Automation of Electrical control panels

Star Delta starter, Direct online, Reverse forward control panels for water pumps.

Sizing of Solar panel systems for houses and preparing bill of quantities, Battery sizing for the system

General hydro-electric power process

Electromechanical/Mechatronic systems including lifts, panels etc.

Good knowledge of word processing packages: Microsoft word, Excel spread sheets.

Excellent knowledge of the installation and maintenance of electrical system and equipment.

Capable of reading or writing diagrams and instructions for electrical system and equipment.

Good Knowledge in MATLAB, AutoCAD Electrical and DIALux Evo.

Good in power Generation Control system.

Very good knowledge in calibration of equipment, protection system and installation and upgrading of PLC (Programmable logic Controllers) using the SCADA system.

Generator sizing for any system.

Testing and Commissioning of Electrical panels.

Design of control systems as per customers’ expectations.

Repair of damaged panels and company products.

Automatic Changeover Switch.

Installation and servicing of equipment in the field.

Automating the design of a framework

Implementing it as per the structure of the project

Creating, enhancing, debugging, and running the test cases

Collating and monitoring the defect management process

Sizing of Busbars according to load schedule given, cable sizing

Sizing of Solar panel systems for houses and preparing bill of quantities, Battery sizing for the system

Electrical feeder cable sizing

Transformer fault current calculations

CAREER HISTORY.

POSITION HELD/ EMPLOYER DURATION

CURRENT EMPLOYER.

TRONICS KENYA LIMITED- ELECTRICAL ENGINEER (POWER

AND CONTROL ENGINEERING)

- Develop and enhance new and current circuit solutions.

- Forecast electrical control panel costs.

- Develop plus improve fresh and existing circuit solutions.

- Prepare specifications plus test requirements documents.

- Test, develop and de-bug designs in the lab.

- Analyze and respond to issues as it arrives.

- Develop and maintain relations with other departments while different phases of product development.

- Evaluate engineering design and head project engineering design specific to electrical discipline.

- Suggest modifications to develop and design to enhance quality.

- Develop engineering projects analysis to include preliminary design, calculations, budget analysis, life cycle costs plus equipment selection.

- Develop technical construction specifications.

- Perform surveys to collect field data to develop drawings, layouts and varied visual aids.

- Review designs development for conformance with applicable codes, utilizing engineering standards along with good engineering practices.

- Conduct field inspections as part of construction quality assurance process.

- Coordinate engineering design team activities.

- Support electrical control panel production.

3

RD

March 2020

AIRCON ELECTRA SERVICES(AFRICA) LTD- ELECTRICAL

PROJECT ENGINEER/TECHNICAL ENGINEER.

- Supervising electrical supervisors and foremen.

- Electrical design drawing for buildings using AutoCAD

- Designing of street lighting and building luminance using DIALux Evo Software

- Basic & detail engineering for provision of earthling pits of electrical installation.

- Cable size calculation, cable scheduling &its route selection, overhead or underground

- Proper protection system for all electrical installation.

- Design for fire alarm &detection system &so many more which I am not writing here

- Estimates prepare and assign the resources such as manpower, materials, consumables, equipment, tools, etc., required for all electrical and related works prior to execution.

- Generated estimates and bill of materials from electrical blueprints.

- Generally responsible for implementations and monitoring of all electrical related works at the site.

- Submits site daily reports, inspection requests, estimates and all applicable monitoring reports on regular basis or as required

- Ensures that all the works done are in accordance with the approved construction drawings, contract documents, project specifications, and all applicable standards whether local, national or international standards.

- Installation of 200KW 415V 3 phase diesel generators complete with fuel systems, distribution system. Supervised mechanical, civil and electrical grounding grid system associated with the installation.

- Review Inspection and Test Plans in order to perform all required inspections and witnessing all required tests and add witness and hold points for the Client’s Inspection.

- Directly responsible for the safety of all electrical groups’ personnel of the project by ensuring that the project execution will be done according to all applicable health, safety, sanitary and environmental standards.

- To co-ordinate with Electrical Contractor for Electrification, Execution, Erection & Commissioning

- Handling of electrical load as per requirement.

- Ensure the electrical work has Complied with the specifications, codes, and standards and according to the shop drawings.

- Maintain the safety measures on site and ensure that all quality control regulations are met.

- Checking the Workmanship and material Quality as per approved make August 6

th

2018

to 2

nd

March 2020

and standard work for the Right quality and standard work

- Coordinate with consultants, architects, and other stakeholders.

- Designing and implementing new network solutions and/or improving the efficiency of current networks

- Installing, configuring and supporting network equipment including routers, proxy servers, switches, WAN accelerators, DNS and DHCP

- Procuring network equipment and managing subcontractors involved with network installation

- Configuring firewalls, routing and switching to maximize network efficiency and security

- Maximizing network performance through ongoing monitoring and troubleshooting

- Arranging scheduled upgrades

- Investigating faults in the network

- Updating network equipment to the latest firmware releases

- Reporting network status to key stakeholders

- CCTV camera installation

INDUSTRIAL ATTACHMENT-ATTACHEE,

KENGEN (KENYA ELECTRICITY GENERATING COMPANY)–

TANA POWER STATION

- General hydro-electric power process

- Electromechanical/Mechatronic systems including lifts, panels etc.

- Maintenance of plant i.e. exciters, windings and brushes.

- Installation of electric gadgets such as Mini Circuit Breakers (MCBs), Circuit Breakers (CCBs), lamps, switches, fuses, contactors and isolators.

- Maintenance of Mesco power station machine

- Endorsement to the safety precautions according to the stipulated company policies.

- The civil structure of power house.

- Installation of security light, wall socket and a door alarm

- Worked with step up and step-down transformers

- Over haul and weekly service of the generator

- Connecting and servicing motors and submersible pumps

- Connection of sensors/insulation test of the machine motor and rotor winding

- Standby diesel pumps

- Protection system by use of relays and fuses

May 2016 – July

2016.May 2015-

July 2015.

ACHIEVEMENTS.

MAKONGENI PETROL STATION FOR EON ENERGY LIMITED (12 th

MARCH -1

st

AUGUST 2022).

Project design Engineer for the station. I am doing electrical design for the station and also designing the Lower Voltage panel for the petrol station. SIKWADHI PETROL STATION FOR EON ENERGY LIMITED (10 TH

NOV 2020 TO

23

RD

MARCH 2021).

Project design Engineer for the station. I did electrical design for the project, bill of quantities, cable sizing, generator sizing for the entire system and electrical installation for the project. Commissioning of the project and handover to the client after all tests have been. AFSAAJ PROJECT. (15

TH

AUGUST 2018 TO 7

TH

JULY 2019)

Project Manager and Electrical site Engineer for this project. I was in charge of all electrical installation works from electrical piping, wiring and electrical fitting. Generator sizing for the project. Afsaaj project was a residential apartment along Muthangari road with 48 units, block A had 24 units and block B had also 24 units. I did all electrical, did cost estimation for the project and management of work at the site.

STRENGTHS

Computer Literate.

Extremely Organized and reliable.

Excellent Communication and interpersonal skills.

Fast learner, hardworking, flexible, independent and a great team player.

Adaptable, trustworthy and with ability to work under pressure.

Efficient in time management and able to fulfill deadline requirements. QUALIFICATIONS.

EDUCATION DURATION

BSc in Electrical and Telecommunication

Engineering,

Multimedia University of Kenya.

September 2013 – August 2018.

Loreto Nakuru School,

Kenya Certificate of Secondary Education.

February 2008 – November 2011.

Seven Forks Primary School,

Kenya Certificate of Primary Education.

January 2000 – November 2007.

REFEREES.

1. Mr. Vincent Makau

Tana power station Kengen

Murang’a

Email: adr7s3@r.postjobfree.com

Tel: 072*******.

2. Mr. George Mwangi

Electrical Installation Subcontractor

Nairobi

Email: adr7s3@r.postjobfree.com

Tel: 072*******.

3. Mr. Francis Kiarie

Tana power station Kengen

Murang’a

Email: adr7s3@r.postjobfree.com

Tel: 072*******.

Contact this candidate