Husky Energy Industrial Training

Brien Sanchez 504-***-****

*** ***** **, *******, ** 77514 Brien ************@*****.***

Summary of Qualifications

Employment

I have years of Electrical and Instrumentation experience traveling on projects Domestically / Abroad in positions as: I&E QA/QC Inspector, FCO Tech. Commissioning Tech, Compliance Supervisor. Team player and extensive experience regarding to safety and ensure that all personal take a safe and prominent role on a project.

August, 2021 – November, 2021

Williams Energy Division: Williams Leak Detection Project

Electrical & Instrument QA/QC Inspector. Travel to various work locations.

Responsibilities to ensure that the RTD is installed underneath surface and mounted correctly to the Pipeline. Run Conduit to the Transmitters going to the PLC panel. Function test RD unit before landing one pair wire to Transmitter. Complete Correct documents for trenching and following the Trench guidelines.

(August, 2020 – November, 2020)

Williams Energy Division: PLC Panel Williams upgrades.

Electrical & Instrument QA/QC Inspector.

Responsibilities included: Ensure the Contractor is completing work to Williams Company specs. Witness all Loop checks and wire terminations. Check Cable installation routing Cable scheduling, Cable Identification drawings. Confirms as built Red Line drawings and check punch list items on all Electrical installations are completed. Fill out Various Permits for job task being performed. Ensure job is being performed safely and in a professional manner. Verify all construction activities are within Industry Codes.

September, 2019 – February, 2020

Husky Energy

Electrical & Instrument QA-QC Lead Inspector

Ensure that the QC I&E inspection folders have the correct Loop, P&ID drawings, Inspection of walkdowns of the Instruments and to verify that the field devices are wired up from the PLC, marshalling panels out to the IJB boxes and wired correctly in the field devices. Make punch list of deviancies on the field devices. Sign A & B sheets for the field devices and ensure they are filled out correctly. Use Micrometer to measure Plate thickness and Bore size for documentation on Office Data sheets.

August, 2019 – September, 2019

Noble Drilling Ship Globetrotter II

Electrical & Instrument QC Inspector

Inspection of New Power Distribution 480 Panels and New Automation Upgrades to the New ROV Package system. Inspection of New 480 Volts Explosion Proof Junction Enclosures to the VFD Control Panels for the new NOV Cutting Dryer Motors, NOV Cement Units, Vacuum Unit, and NOV Horn / Strobe Auger Motor Starter Enclosure. The Power Distribution is coming from the 480 MCC rooms.

March, 2019 – June, 2019

Excel LLC

Instrument & Electrical QA/QC Inspector

Attached to Sasol Engineering Dept. to perform PSSR Packets for Various Field systems. Walk down for Verification and Identification of Field instruments are installed in the correct locations on the Field Equipment to Engineering P&ID Drawings. Ensure nothing missing on Instruments and make a punch list of what’s missing and turn into Engineering Dept. Complete Red Line of Drawings and make three copies for the engineers.

January, 2019 – February, 2019

Ashley Electrical & Automation

I&E Technician

Support maintenance Dept. at lobo gas Plant and 3 Gas Compressor Station in

Pecos Texas / New Mexico locations. Troubleshooting / recalibration and repair of various Field Devices PT /FT, TT, / Fisher Valves, Pumps & Motors. Troubleshoot PLC I/O card going out to the field devices. Read P&ID and Schematic drawings.

March, 2019 – November, 2018

Danos Inc.

Instrument / Controls / Pneumatic Tech

Construction on running SS tubing and tray for Tubing up grades on new 30” Pig launcher project. Function test of ESD stations, and control systems. Repairer and Install New Field Instruments Make modifications to the HPU Control Panels, performed walk thru to verify old, out of service & not banded tubing for future work packs. Do visual on the TSE loop to verify the correct coverage as required on the P&ID drawings for each deck on the platform. Assist Maintenance personal as needed

July, 2017

Control Concepts

Electrical Foreman (GOM)

Support the Electrical dept. Maintenance personal to remove power cables from temp Living Quarters and install New CLX power cables from the MMC to the New Living Quarters being installed on the rig. Do various little jobs are pulling cables for new F&G detectors, Lighting on different levels of the platform. Inspection of all new Electrical devices being installed to Field Engineering drawing.

November, 2016 – May, 2017

Rapp Electrical Service

(Temp) Residential

Read Electrical Circuit Breaker panel drawings to ensure the wiring is being done correctly, safely and in a professional miner. Replace old Fuse Panels with new Circuit breaker panels. Install Conduit and run PVC for underground wiring for various jobs.

February, 2015 – November, 2015

SWIFT Worldwide Services:

Automation I&E Tech;

Support HESS Maintenance I&E Maintenance Dept. Gas Plant in Seminole, TX.

Responsibilities included Monthly compliance testing and troubleshoot of field devices, Unscheduled repairs and maintenance on Betis / Fisher mechanical valves, control and safety systems plus Fire and Gas system testing. Repair, Installation and calibration of various Control valves, Pressure, Level, and Temp, transmitters. Construction on tubing / electrical up grades. Loop testing of various equipment and ESD systems. Assist with Installation and removal of Motors, Turbines, and pumps.

2014 – January, 2015

TOTAL Instrumentation & Electrical Services LLC

Commission Tech

Inspect Instrumentation and Field devices to ensure they are installed correctly to the P&ID drawings. Function checkout of instruments, Calibrate, Shoot signals from Field Devices to the Operators control board to verify correct Field Device. Set URV and LRV in various Field Devices. Troubleshoot wiring from Field device back to the HMI,. PLC locations Shoot loops to verify wiring if for correct END Devices. Help Maintenance crew get all equipment tested and assisted as needed.

2013-2014

Doc Durham Inspection Services

I&E/C QA Inspector (Chevron Upstream Oil & Gas

Nemba Stage II SNX Brownfield Project Angola, West Africa)

Quality Assurance and Control to ensure and Inspect that all I&E construction work for the project is being installed to the Chevron’s Engineering Specs and Codes. ITP inspections to verify that all the Instrumentation & Electrical devices are installed, verified and documented in accordance to the P&ID drawing and spec’s with no deviations unless with written notice and approval by the Chevron Engineers. Complete various Inspection forms and put into data base for review and final look over by Chevrons QA/QC dept.

2012-2013

EDG Consulting Engineers & Inspection Division

E&I / C Inspector (Steam Plant Field Project, Madagascar OIL)

Verification of all Instrumentation tubing, CLX cables, I&E Ladder tray is being installed to Engineering Specifications and Codes. Commission, FCO and Shoot Loop testing of all Instrument & Electrical devices is being performed, verified, documented and given to QC Manager. Troubleshoot wiring from Field device back to the HMI. Shoot loops to verify wiring if for correct END Devices.

2011

Automated Controls & Power

I&E Tech Lead (ACP) (General Electric’s GE MS7001 Turbines)

Duties included read P&ID drawings, Safe Charts, Hart 475 Communicator and use of test equipment to verify that all field devices are correctly installed, Calibrated. Yearly function compliance testing & loop checks to field devices. Troubleshoot, repair and replace Pressure, Temperature & Level switches, and any defective Fisher Control valves. Support the maintenance personal at the plant for commissioning and startups of turbines. Assist Maintenance personal of all work being performed in the

Power Station. (The company had three similar Power Stations that had 3 to 4 GE MS 7001 Turbine stations that we did every year.)

2010-2011

Udelhoven Oilfield Services (ENI) (Nikaitchuq Project Oliktok Point (Northern Slope, Alaska)

FCO Tech

Commission & Startup of new equipment in project. Use Daqart system to documentation of equipment devices tested. Inspect Instrumentation and Field devices to ensure they are installed and function to Engineering Specifications. Troubleshoot wiring from Field device back to the HMI.

2008-2009 Precision Instrument & Electrical Controls (Gulf of Mexico) Instrument Lead

Duties included Inspection, Verification of all Instrumentation tubing, Support brackets & Tubing Tray is being installed to Engineering Specifications. Loop testing of critical Pneumatic Control Panels, End devices and Instrumentation & Electrical devices are being performed, verified, documented and given to Maintenance Dept.

2007-2008

Test Automation & Controls (Chevron / Sonangol )

Compliance Supervisor, (Angola, Africa)

Responsibilities include monthly compliance testing as well as unscheduled repairs and maintenance on Safety Devices that included: Autoclave H.P. Pneumatic Control panels, Hi-Lo Pilots, Relays, Temperature Switch’s, Level Mechanical valves, Control & Safety System. Fire & Gas and Gas detector system testing. Loop testing, tracking of scheduled maintenance testing of critical device. Weekly reports to company supervisor of test reports. Write and fill out documents containing to safety such as; JSA, PTW.

(cont. from prior page)

Test Automation & Controls ( Atyrau, Kazakhstan.)

QA/QC Inspector

Inspection to ensure that the Instrumentation Tubing Supports, Tubing tray, Instrument tubing, and all the I&E Field Devices are being installed correctly to the Engineering Specifications. Verify Loop testing of all New Field devices being installed. Complete correct documentation for test results and given to QA/QC Supervisor Dept.

Education

West Jefferson High School

Mechanical Drawing Course

Industrial Welding School

Delgado Community College Instrumentation and Controls

Training Skills

U.S. Army & N.G.

NCO Combat Leadership Academy

Helicopter Maintenance Course

Fixed wing & Rotary Power Train Mechanic Course

Oil, Gas, Petroleum Specialist Coarse

Industrial Training

PSST (T-2 ) API 14 C Subpart O Production Safety Systems Training 30 CFR Part 250

Pneumatic and Electrical Control Panels

Core Compliance Training-Annual Refresher

Swagelok Class FKO / 2507

Dangers of Pressure including Piping & Vessel Isolation Techniques

Daily Safety Management Course

Fall Protection Competent Person Safety Training

Fall Protection User /Rescue Training Course

OPITO Approved ( T-HUET ) – 5195 (Including Sea Survival Exercises)

Fisher Control Valve and Bettis Valves Repairer Training (OJT)

Exxon MOBIL Mentor Training

Exxon Mobil PSV Repair and Pressure Testing of PSVs (OJT)

Chevron CMS Computer Job Card Training. (OJT)

Chevron ITP Training

Chevron / Dynamic ARC Flash Training (OJT)

Hart 375 & 475 Communicator proficient

OSHA 10 Certified

Combustible Gas Theory- Early Gas Detection Technology Course

Ultima X Gas Monitor-Calibration-Care-Use Course

Galaxy GX2 Automated Test System- Care & Use Course

RS Ladder Logic Training (OJT)

PLC I/O card Troubleshooting Training (OJT)

Northern Slope Training (Anchorage, Alaska)

Offshore LACT Metering Skid installations.

JD Edwards Material Training

TWIC Card, IADC RIGG PASS, Safe Land & Gulf, ISN card

Installation and Repair off Pumps, Turbines, Motor Removal & Installation.

James Young 504-***-****

Scott Carol 361-***-****

Megan Shea 570-***-****

Contact this candidate