Resume

Sign in

QA/QC Painting, Insulation, Fireproofing & Refractory Inspector

Location:
Coast Strip C, Al Ahmadi, 65, Kuwait
Salary:
1200 KWD
Posted:
April 27, 2022

Contact this candidate

Resume:

CURRICULUM VITAE

SRIKANTH DOLI

H.NO: B-**/**, N.T.P.C,

RAMAGUNDAM,

INDIA.

Email: adqwcq@r.postjobfree.com

Skype Id: srikanthvnr86

Mobile: +965********(KUWAIT)

POSITION:

QA/QC PAINTING & INSULATION ENGINEER (KNPC, KIPIC, TAKREER, GASCO & SAUDI ARAMCO APPROVED INSPECTOR WITH SAP No. # 70011638)

CAREER OBJECTIVE:

To obtain a long term and fulfilling career with a high performing Management Team of a prestigious organization and to continuously develop my skills and enhance my knowledge to its fullest potential.

SUMMARY OF EXPERIENCE:

Highly motivated and around (14)Years of experience in Painting, Insulation, Fireproofing, GRE lining & Refractory works as a Quality Control Inspector working with multi-national work forces, conversant with all types of paints and specialized coatings, fireproofing and insulation, personnel protection, acoustic and cryogenic services as well as refractory materials and their inspection requirements. Reviewed Sub-Contractors Procedures, Inspection Test Plans which covers the following projects and have experience of working to and with codes and standards such as ASTM, ISO, NACE, BRITISH, SSPC, SHELL, KNPC, SAUDI ARAMCO used in the Oil & Gas industries.

PROFESSIONAL QUALIFICATIONS:

• Bachelor of Technology in Mechanical Engineering

(Jawaharlal Nehru Technological University, Hyderabad, INDIA) Licensed No. #04071A0344

• Certified BGAS Painting Inspector Level 2

Certification No. BG600998

• Certified ASNT LEVEL 2 Inspector

Certificate No. PT: 9121928, MPT: 9121942, RT: 9121956, UT: 9121970

• KNPC APPROVED QA/QC PAINTING & PIPING INSPECTOR

• SAUDI ARAMCO APPROVED QA/QC PAINTING & INSULATION INSPECTOR SAP No. #70011638

Work Experience

Responsibilities:

• As a Contractor Inspector, provide quality and oversight of QA/QC Inspections for Coatings, Insulation, Fireproofing, Refractory system to ensure project standards, specification, and documentation is to contractual requirements.

• Preparing and Reviewing for Coating, Insulation, Fireproofing, Refractory project procedures such as Inspection & Test Plan (ITP), Method Statements (MS), & Project Procedures.

• Ensure the implementation of approved Project Quality Plan (PQP), Inspection & Test Plan (ITP) developed by the contractors for the EPC scope of work.

• Ensure that Quality Control work is done accordance with the Process Control Plan quality procedures and sign, when required, the appropriate line on the Process Control Plan and prepare the Protective Coating/Insulation Inspection Reports.

• Ensure that painting and insulation inspection equipment is calibrated before use and inform the quality Control Supervisor if equipment that is broken or out of calibration.

• Monitor all blasting, coating and insulation activities for conformance with applicable codes standards and Contract requirements. Client : KUWAIT NATIONAL PETROLEUM COMPANY

PMC : AMEC FOSTER WHEELER

Company : FDH JV, KUWAIT

Position : QA/QC Painting, Piping & Insulation Inspector Duration : July 2016 – Oct 2017

Project : KNPC CLEAN FUEL PROJECT MAB 2

Responsibilities:

• As Client/Contractor representative, provide quality and oversight of QA/QC Inspections for Coatings, Insulation and Fireproofing system to ensure project standards, specification, and documentation is to contractual requirements.

• Preparing and Reviewing for Coating, Insulation, Fireproofing project procedures such as Inspection & Test Plan (ITP), Method Statements (MS),

& Project Procedures.

• Ensure the implementation of approved Project Quality Plan (PQP), Inspection & Test Plan (ITP) developed by the contractors for the EPC scope of work.

• Issue and follow up on Surveillance Report (SR), Nonconformity Reports (NCR), Corrective Action Request (CAR) and Preventive Action Request (PAR). Client : KUWAIT INTEGRATED PETROLEUM INDUSTRIES COMPANY PMC : AMEC FOSTER WHEELER

Company : HEISCO, KUWAIT

Position : QUALITY CONTROL ENGINEER

Duration : Nov 2017 – Present

Project : Al Zour New Refinery Project Package 2, 3 & 4

• Verification of drawings, reviewing procedures, supervision and inspection of Corrosions, Coating, Insulation, & fireproofing works.

• Actively took part project weekly meeting for quality concerns and responsible for corrective and preventive action, site observation memo, issuing NCR and closing.

Client

PMC

Company

Position

Duration

Project

: ABU DHABI OIL REFINERY COMPANY (TAKREER)

: JACOBS

: BUREAU VERITAS, ABU DHABI

: Third Party Inspector – Painting & Insulation

: June 2015 – June 2016

: CARBON BLACK & DELAYED COKER PROJECT

Responsibilities:

• Working as Client representative and as a part of PMC team and responsible for all anticorrosive protective coatings, insulation, fireproofing.

• Spot witness, Surveillance, monitoring, controlling activities carried out according to approved ITP and method statement during blasting and coating of Tanks and piping

• Witness of ambient conditions during blasting and painting activity, checking ambient reading log book as recorded and maintained by contractor quality control inspector.

• Witness surface preparations standard, application of external coating & internal lining of tanks. Witness Surface preparation standard, application of heat shrink sleeves to underground pipes field weld joints.

Witness the paint material, Storage conditions. Review of technical and material safety data sheets.

Witness the surface preparation of pipes, tanks during installation cold insulation, hot insulation, acoustic insulation materials and securement. Complete responsible for re-view and approval of Vendor print painting procedures, Mar, Method statements and ITP.

• Actively took part project weekly meeting for quality concerns and responsible for corrective and preventive action, site observation memo, issuing NCR and closing.

Client : ABU DHABI GAS INDUSTRIES LTD. (GASCO)

Company : BUREAUVERITAS, ABU DHABI

Position : Third Party Inspector – Painting & Insulation Duration : March 2015 – May 2015

Project : Enhancement of Existing Water Distribution Facilities, GASCO, Buhasa Construction of Potable Water Tanks and associated GRE piping Responsibilities:

• First and foremost is considering safety to everyone at site with zero tolerance. "Nobody Gets Hurts"

• Keep Quality Field Engineer updated with discipline issues.

• Provide expertise to PMT/Contractor team to avoid/resolve quality problems

• Respond in a timely fashion to requests for inspection by the Painting / Insulation Supervisor.

• Ensure that Quality Control work is done accordance with the Process Control Plan quality procedures and sign, when required, the appropriate line on the Process Control Plan and prepare the Protective Coating/Insulation Inspection Reports.

• Ensure that painting and insulation inspection equipment is calibrated before use and inform the quality Control Supervisor if equipment that is broken or out of calibration.

• Identify and recommend corrective measures in compliance with the pre-set standards & procedures on problem areas and verify proper resolution.

• Monitor all blasting, coating and insulation activities for conformance with applicable codes standards and Contract requirements.

• Monitor all process of insulation work such as Hot & Cold insulation, acoustic, corrosion under insulation, steam tracing & electrical tracing, acoustic hot and acoustic cold insulation

• Monitor that chemical applications are performed in the correct sequence through surveillance and recording the results.

• Verify the applications of chemical products are being applied in accordance to approve procedure.

• Coordinate inspection points.

• Identify and recommend corrective measures in compliance with the pre-set standards & procedures on problem areas and verify proper resolution. Client

Company

:

:

Abu Dhabi Oil Refining Company (Takreer)

Daewoo Engineering & Construction

Position

:

QA/QC Sr. Painting, Coating, Insulation & Fireproofing Inspector Duration

Project

:

:

September 2012–February 2015

Takreer Ruwais Refinery Expansion Tanks and Associated Interconnecting Piping Epc 4 Project, Abudhabi, U.A.E. Crude Tanks – 3 Tanks Holding 477,000 M3,

Intermediate Storage – 27 Tanks Holding 584,000 M3, Product Storage – 25 Tanks Holding 2,332,000 M3

LPG and Mixed Butane Storage 9 Spheres Holding 59,000 M3 Propylene Storage – 3 Refrigerated Storage Tanks Holding 174,000 M3 Responsibilities:

• As Client/Contractor representative, provide quality and oversight of QA/QC Inspections for Coatings, Insulation and Fireproofing system to ensure project standards, specification, and documentation is to contractual requirements.

• Preparing and Reviewing for Coating, Insulation, and Fireproofing project procedures such as Inspection & Test Plan (ITP), Method Statements (MS), & Project Procedures.

• Ensure the implementation of approved Project Quality Plan (PQP), Inspection & Test Plan (ITP) developed by the contractors for the EPC scope of work.

• Issue and follow up on Surveillance Report (SR), Nonconformity Reports

(NCR), Corrective Action Request (CAR) and Preventive Action Request (PAR).

• Verification of drawings, reviewing procedures, supervision and inspection of Corrosions, Coating, Insulation, & fireproofing works. Client : South East Asia Oil & Gas Pipeline Company Ltd, China Company : Punjlloyd Ltd.

Position : Senior Coating Engineer

Duration : March 2012 August 2012

Project : 40ӯ & 32ӯ Oil and Gas Myanmar China Cross Country Pipeline Project Myanmar China Oil and Gas Division

Responsibilities:

• Surface preparation Pipe and components shall be abrasive blast cleaned. The degree of cleanliness shall be Sa 2 in accordance with ISO 8501-1.

• Prior to abrasive blast cleaning, the steel surface shall be dry and free from contamination (oil, grease, temporary corrosion protection, etc.) and surface defects (slivers, laminations, etc ) detrimental to the surface or to the adhesion of the coating. The blast-cleaned surface shall have a roughness between 40 µm and 90 µm, as measured in accordance with ISO 4287-1.

• After blast cleaning, the surface of the pipe shall be inspected. All slivers, laminations, weld spatter and other surface imperfections made visible by the blast cleaning process shall be removed. After removal of these defects, the residual thickness of pipe and components shall satisfy the minimum tolerance requirements specified by the relevant standard. All treated areas greater than 10 cm shall be prepared to provide a profile.

• Pipe and components shall be maintained at least3 C above the dew point temperature prior to coating. Contaminants shall be removed prior to coating. Chemical treatment of the steel may be used in addition to abrasive blast cleaning.

• Preheat temperature shall be checked using a pyrometer, surface thermometer. Mixing of primer, wet film thickness and drying time shall be verified prior to application of the sleeve.

• The HSS shall be inspected over the 100% of field joint to make sure it is free from disbandment, air entrapment, cracks, bubbles, tearing or any other defect. The overlap of the HSS on the existing coating shall be at least 50 mm on both sides.

• Adhesive shall extrude from the ends of the full installed sleeve. There shall not be any signs of disbondment, air entrapment tearing, cracks, bubbles, or any other defects. No traces of oxidation bluish areas, foreign substances, underneath. Smooth appearance with edges perfectly adherent to the pipe on the whole circumference and adhesive extruded from the ends, etc.

• The coated material shall be 100% tested using a high voltage DC impulse type holiday detector consisting of a semicircular or brush type electrode and provided with audible signal. The test voltage shall not be less than 15 kV and the progress rate shall be 300 mm/sec.

• The adhesive test for HSS consists in removing some portions of the sleeve in difference areas in order to verify the good performance of the three layer system.

• The test shall be performed using a hand dynamometer device in accordance with ASTM D1000 method B. The adhesion shall be checked by means of at least three tests on each inspected HSS.

• All holidays electrically detected shall be repaired. The affected area shall be repaired to an approved procedure and retested.

Client

Company

Position

Project

Project

Project

Project

Project

Project

Duration

: Saudi Aramco, Saudi Arabia

: FMQ Sons Company (Pipeline Specialist)

: QA/QC Painting & Coating Inspector

(Saudi Aramco Approved With SAP Number # 70011638)

: Installation of 32”ø Crude Oil Pipeline EWRR 1 to Riyadh Refinery.

: 16”ø Trunk line – G from Existing Remote header to HRDH Gas gathering Manifold of GOSP – 1.

: HRDH Gas Well Heads & Flow lines of 1037, 1061& 1075 F/L to HRDH GOSP 1.

: ANDR Jauf Gas Well Head 600 Tie In to Remote Header ‘A’.

: UTMNH 1865 Well Head & Gas Flow line, UTMN KGW 1879, HWYH 2219.

: UTMN Jauf Gas Well Head 2004 Tie In to Remote Header ‘E’.

: January 2009 February 2012

Responsibilities:

• Day to day supervision of ongoing coating activities at the construction site and see to it that the work is in accordance with the engineering design and specification and within the scope of work.

• Checking Surface preparation, Coating Quality, Holiday, WFT, DFT, and Weather Condition, Application & Final inspection as per international standard and Aramco standard (APCS-1C, APCS-1C primer, APCS-4, APCS-6, APCS-26, APCS-113A, APCS-113B and APCS-113C&Holiday Detection).

• Following specific duties such as recording weather conditions &substrate temperature by using whirling hygrometer, dew point & RH % slide calculator and steel temperature gauge.

• Conversant with inspection techniques such as surface cleanliness/profile check, chloride test, WFT& DFT Checks, adhesion test, Holiday detection etc. as per the industry standards.

• Supervision of company existing projects with particular attention to Quality Control/Assurance, responsible for the execution and monitoring of approved Quality Control/Assurance Manual in the field of Coating and Painting. Preparation and submittal of quality documents to QC Supervisor and/or QA-QC Manager.

• Perform in-process and final inspection of coating and painting activities that includes verification of blasting materials to be used. Inspection and testing of coating/ painting equipment, visual inspection and verify surface profile of metal surface prior to metal surface prior to coating/ painting after blasting/cleaning.

• Conduct visual inspection on coated/painted surface and verify the wet and dry film thickness. Pressure record and/or report of complete works among other.

• Thermal insulation on boiler, vessels & allied plant machineries inspection. And Insulation for stream and heat tracing for piping and equipment Inspection. Insulation for chimney & auxiliary boiler inspection and Acoustic insulation inspection. Cold insulation for air conditioning ducts, chemical pipe lines & vessel inspection.

• Insulation for electrical tracing lines inspection. Calcium silicate work for turbine, piping & vessels inspection. Foam Glass insulation for Equipment inspection. Ceramic fiber insulation for Equipment inspection.

• Coordinate with the client and sub-contractors representative on daily basis to resolve any quality problems or issued.

• Conduct visual inspection of all painting/coating materials to insure its compliance with the required project standard and specification.

• Conduct visual inspection on all equipment to use to ensure equipment is calibrated and in good operating condition.

• Conduct in process and final inspection of painted/coated pipe surface including platforms prior to delivery and installation at site.

• Preparation and compilation of quality reports/records and other quality related documents for activity acceptance and final project handover.

• Assist and perform function as maybe directed by QC Supervisor. Company

Position

Duration

: Recon Engineering Works

: QA/QC Coating Inspector

: June 2008 – December 2008

Responsible for

• Day to day supervision of ongoing coating activities at the construction site and see to it that the work is in accordance with the engineering design and specification and within the scope of work.

• Checking Surface preparation, Coating Quality, Holiday, WFT, DFT, and Weather Condition, Application & Final inspection as per standards

• Following specific duties such as recording weather conditions &substrate temperature by using whirling hygrometer, dew point & RH % slide calculator and steel temperature gauge.

• Conversant with inspection techniques such as surface cleanliness/profile check, chloride test, WFT& DFT Checks, adhesion test, Holiday detection etc as per the industry standards.

• Supervision of company existing projects with particular attention to Quality Control/Assurance, responsible for the execution and monitoring of approved Quality Control/Assurance Manual in the field of Coating and Painting. Preparation and submittal of quality documents to QC Supervisor and/or QA-QC Manager.

SPECIALTIES & EXPERTISE:

PROTECTIVE COATING EXPERIENCE: Having good exposure and experienced in special protective coating activities which includes inorganic, organic, epoxies, glass flakes, phenolic epoxies, FBE coating, PU coating, heat shrink sleeve applications, wrapping, mastic coatings, TSA coating, antifouling coatings, galvanized coating, concrete weight pipe coating, fire proofing fendolite m- ii portland cement., passive fire proofing in-tumescent chartek7, internal lining of pressure vessels and storage tanks, pickling, passivation, insulation and cladding activities. Various painting/coating, visual inspection of abrasive, grit, garnet, blasting/painting/coating by using the following measuring instruments: Whirling Hygrometer, dew point Calculator, Testex Tape, Surface Profile Gauge with Disc, Orifice Gauge, Hypodermic Needle Pressure Gauge, Holiday Detector, Wet Sponge Pin Hole Detector, Chloride Detector SCM 400 salt tester, Dolly Test, Peel Strength Gauge, Hardness gauge & Impact Test etc.

INSULATION EXPERIENCE: Sound knowledge in the field of industrial thermal insulation familiar with all the insulation materials like mineral wool, calcium silicate, cellular glass, perlite, fibre glass, adhesives

& accessory material for cold, hot, acoustic insulation and their application or installation procedures for hot, cold and cryogenic temperature system. Identification of lines & process through P&id drawing, plan drawing &iso drawings. Responsible for quality control of all insulation activities in accordance with project specification. Conversant with the international standards of insulation such as ASTM, PIP, CINI, NAIMA & Saudi Aramco.

LANGUAGE PROFICIENCY:

English, Hindi, Telugu, Tamil, Arabic, Malayalam

PASSPORT DETAILS :

Passport No : N7823294

Passport Expiry Date : 14/02/2026

Immigration Status : ECNR

INDIAN Driving License : DLFAP315129112008

SAUDI Driving License : 5143177

COMPUTER PROFICIENCIES :

Operating Systems : Windows98, XP, Professional, Vista Tools : Ms Word, Ms Excel, Ms Power Point

Drawing Tools : AutoCAD ver. 2000, 2008

TRAININGS AND SEMINARS:

BGAS-CSWIP PAINTING INSPECTION COURSE

TWI, Manama, Bahrain.

RISK ASSESSMENT INTRODUCTION

Bureau Veritas Head office, Abudhabi

SAFETY CAMPAIGN WORKING SAFELY IN THE

HEAT Bureau Veritas Head office, Abudhabi

DEFENSIVE DRIVING TRAINING

Bureau Veritas Head office, Abudhabi

BASIC I.S.O.9000:2000 QUALITY STANDARD AWARENESS

COURSE FMQ Head office, Al-khobar, K.S.A.

COATING PRE-CERTIFICATION ORIENTATION PROGRAM

FMQ conference room, Site office- C9, Khurais project, K.S.A. GENERAL SAFETY ORIENTATION PROGRAM

FMQ conference room, Site office- C2, Khurais project, K.S.A. VALUE OF WORK SEMINAR.

FMQ conference room, Site office- C9, Khurais project, K.S.A. REFERENCES:

Mr. RAVI KUMAR

TPI inspector

Bureau Veritas

AbuDhabi

adqwcq@r.postjobfree.com

+971*********

Mr. UDAYA SANKAR GANDURI

TPI inspector

Bureau Veritas

AbuDhabi

adqwcq@r.postjobfree.com

+971*********

Mr. MOHD.MUSHTAQ AHMED

Project Manager

F.M.Q. Company

Al-khobar, Kingdom of Saudi

Arabia. adqwcq@r.postjobfree.com

+966*********

DECLARATION:

I hereby declare that all the statements cited above are correct to the best of my knowledge and belief.

SRIKANTH DOLI



Contact this candidate