Antonio Borges

Milwaukee, Wisconsin *****

414-***-****

adqvkj@r.postjobfree.com

Objective:

To obtain an opportunity with an innovative company, where I can implement my skills and experience to better myself as well as the company

SKILLS & QUALIFICATIONS

●Engineering Technician 4/Electrical Control Panel Technician / Machine Maintenance Technician/Electrical & Mechanical Assembler

●Word, Excel, Data Entry

●OSHA Hazardous Materials, Waste & First Responder (Certified)

●Welding (certified). -Forklift Operator (Certified), -Scissor Lift (Certified),

●Crane Operator (Certified).

●Skilled in operating a variety of hand and power tools

EXPERIENCE:

Engineering Technician level 4/ Field Service Tech

Rockwell Automation Mequon, WI

07/2020 to Present

(Day to Day Tasks and Job Responsibilities)

Performed the set-up, calibration, testing and troubleshooting of circuits, components, instruments and mechanical assemblies. Develop test specifications, methods and procedures from blueprints, drawings and diagrams. Tested and troubleshoot assemblies and final systems. Completed rework on assemblies and systems as a result of testing. Prepared technical reports summarizing findings and recommending solutions to technical problems. Made selection and set-up of specialized test equipment.

Executed automated electronic product test systems.

Performed evaluation of product performance anomalies, and determines failure causal analysis of moderately complex power and digital electronic industrial machinery control components.

Used automated test systems and electronic measurement tools, followed documented work instructions and on-line procedures in conducting repetitive tests of similar electronic product.

Evaluated unfavorable test results under guidance from a higher level Tester, and makes recommendations for product rework.

Executed tests and record results in appropriate data bases if results are not automatically recorded.

Demonstrated understanding and logical approach to analyses and diagnoses techniques.

Knowledge of electrical safety within the workplace

Demonstrated expertise with Level 1 competencies.

Prepared product for test using documented and defined equipment set-ups in semi-automated test bays.

Knowledgeable of separated power structures within complexity and variation of PCBAs

Utilized more enhanced electrical troubleshooting tools such as Tracers, LCR Meters, Frequency Analyzers, Multimeters Oscilloscopes, and Cap Reformer.

Understands electrical properties of electronic components (IGBT, SCR, Diode, and Capacitor.

Interpret and understand product fault codes and how codes relate to potential functional or application anomalies

High level of harness and point to point measuring continuity across wires

Worked from product user manuals, schematics, connections diagrams, and available test procedures to evaluate, diagnose, and test digital logic and analog power control products to ensure product conformity to functional specifications and quality standards.

Analyzed and diagnose digital and analog electronic systems and circuits to the component level of internal printed circuit board assemblies.

Analyzed malfunctions and perform repairs, adjustments or alterations as required.

Interpret how product operating firmware and test equipment software exercises circuitry function in the testing process and understand test outcomes in guiding the product analysis process.

Formulate a probable cause of the product anomaly and document evidence that supports that formulation.

Define and make informed decisions on implementation of product restoration levels and reliability enhancements.

Research and interpret product Bill of Materials, Engineering Change Orders, and historical documents related to revision and series changes of current and legacy product hardware designs and operating firmware.

Advise and confer with Test, Product Design, and Quality Assurance Engineering personnel in the development of the product analysis and product function restoration approach.

Record product test results, anomalies, and restoration information as appropriate and required in work order manufacturing systems and per process quality procedures.

Assist Test Engineering in building and maintaining test equipment as required

Electrical Control Panel Technician/Field Service Tech/Lead Panel builder/Mechanical Assembler/Welder

STS/Blast Cleaning Tech New Berlin WI

11/17 to 07/2020

●Assembled Custom Electrical Control Panels and Shot Blast Machines in an efficient manner consistent with strict standards of the Company, consistently completing projects ahead of deadline.

●Machine Builder/Mechanical Assembler- Fitted and assembled components according to assembly blueprints, manuals, engineering memos, sketches, and knowledge of machine construction to construct, rebuild, and repair machines and equipment, using handtools and power tools: Analyzed assembly blueprint and specifications manual, and planed machine building operations.

●2) Verified conformance of parts to stock list and blueprints, using measuring instruments, such as calipers, gauges, and micrometers.

●3) Layed out hole locations and drills and taps holes on parts for assembly.

●4) Aligned components for assembly, manually and with hoist, and bolts, screws, dowels, welds, and rivets parts together, using handtools, rivet gun, and welding equipment, or arranges for assembly by welder and electrician.

- Designated parts according to type of machine or machine component as Fixture Builder.

Essential Duties and Responsibilities

- Read and understand CAD drawings, and/or TIFF drawings to obtain precise measurements to determine machine placement in the customer's factory.

- build custom equipment to print

- Plumb pneumatic cylinders and valves according to pneumatic schematics

- Route and run wiring for sensors, motors, drives.

- Travel to customer facilities to installation or dismantling of equipment

- Give direction to riggers for moving and placing a wide range of equipment, up to 50,000 lbs.

- General knowledge and use of tools, i.e. hammer drill, anchors, wrenches, precision measuring tools, dial indicators, feeler gauges, reamers, tap & die

- File and grind painted surfaces to remove blemishes in order to obtain proper fit.

- Check fit, alignment, squareness, parallelism, and operation of moving parts, adjust as needed for proper clearance and function.

●Completed the UL 508a class

●Trained employees to be panel builder/ Electrical Assembler ll.

●Promoted to Lead Panel Builder after 6 months

●Promoted to Control Panel Technician

●Knowledgeable and experienced with I/O Modules, PLCs, HMIs, VFDs, Power Supplies, Transformers, and etc.

●Troubleshooting PLCS to increase productivity and learned the basic of ladder Logic

●Perform Quality Inspections, improving work quality by 36% and overall project completion by 23%

●Diagnosed, isolated, and corrected electrical problems which include replacement and adjustment of components, integral units, motors, controls, switches, standard devices gear and etc, that helped increased the company’s Production and save money

●Knowledge Skilled and Experienced with Digital oscilloscopes, Analog and Digital Voltmeters and Ammeters, Differential Amplifiers with Voltage Probes, Current Sensors with Amplifiers, Tachometers, Power supplies, Spectrum Analyzers, Hi pot tests.

●Written Test Plans, Reports, and other related or supporting levels of documentation.

●Utilizing appropriate test instruments, gear and equipment to Test, Troubleshoot and insure Compatibility and Safety of all circuits, printed circuit boards, components, switches, controls, VFD’s HMI, PLC’S and etc., to assure Correct Performance, Quality and Operation.

●Compose well written, legible, and accurate notes of experiments, including a summary on interpreting test results and recommendation.

●Worked independently and prioritized next tasks when the supervisor is unavailable. Assisted in employee development and continuous improvement which includes training of other electrical assemblers

●Learned and has working knowledge of applicable electrical standards such as NEMA, NEC, UL, IEC

●Communicate on an equal level with electrical designers

●Proficient with soldering

●Route and bundle wires and cables neatly and according to established electrical standards

●Check work to ensure error-free products

●Keep red-lines of any changes required during manufacturing and turn in to supervisor on completion of the projects.

●Complete wire harness installation point to point and final wiring of large, complex cabinets, control panels, & other electro-mechanical assemblies.

●Read and interpret wiring schematic and wire lists.

●Wired and Assembled components according to provided electrical schematics and wire lists layout and mount components

●Performs electro-mechanical assembly, disassembly and rework of various electronic products and mechanical assemblies.

●Made precision cutouts and knockouts for air conditioners, LCP’s and push buttons to Save the company money from outsourcing.

●Set up welding machine an applied GMAW on carbon steel, aluminum and other metals and on Different thicknesses of steel

Electrical/Mechanical Assembler

Leonardo Drs Technologies, Milwaukee, WI 1/17- 11/17

●Fully assembled electrical cabinets for navy ships that increased the company bottom line

●Machine Builder: Assembler, special machine, bench hand, fitter, machinist, bench, vise hand Fits and assembles components according to assembly blueprints, manuals, engineering memos, sketches, and knowledge of machine construction to construct, rebuild, and repair machines and equipment, using handtools and power tools: Analyzes assembly blueprint and specifications manual, and plans machine building operations. Verifies conformance of parts to stock list and blueprints, using measuring instruments, for example calipers, gauges, and micrometers. Lays out hole locations and drills and taps holes on parts for assembly. Aligns components for assembly, manually or with hoist, and bolts, screws, dowels, welds, or rivets parts together, using handtools, rivet gun, and welding equipment, or arranges for assembly by welder and electrician. Brushes blue pigment on parts and mates them to detect high spots on surfaces. Removes high spots, and smooths surfaces, using chisels, scrapers, files, and powered hand grinder [SCRAPER, HAND (machine shop)]. Verifies alignment and tolerances of moving parts, using measuring instruments, for example dial indicators and thickness gauges. Tests operation of assembly by hand. Assembles, sets up, and operates machine to verify functioning, machine capabilities, and conformance to customer’s specifications. formed and fasten piping, fixtures, and attachments required to service machine with air, water, and oil. installed wiring and electrical components to specifications. worked as member of team on limited part of fabrication process. set up and operate metalworking machines to shape parts [TOOL-MACHINE SET-UP

●Completed/Received Crane Operator Certification-Assembly and wiring of electrical cabinets, including building of production sub-assemblies, using detailed work instructions and standard and specialized hand & power tools

●Wire and troubleshoot circuits an test electrical cabinets

●Soldering operations

●Read, understand and work on product documentation (blue prints, schematics detailed drawings, procedures, etc.)

●Correctly generate detailed assembly records documenting actions taken

●Interface with quality representatives, manufacturing engineers, and/or customer representatives to ensure the highest possible quality on product manufactured in the time allotted and/or required

●Visually inspect work previously performed by others

●Performed necessary changes, modifications, and/or repairs as directed

●Access and use of electronic data mechanisms such as digital paper and electronic mail

●Train and/or assist other employees as required

●Perform other duties and assist in projects, as directed by supervision

Asbestos Supervisor/Electrical Wiring apprentice/ Carpenter /Lead Abatement worker/Welder

OGC Construction. Germantown, WI 10/12 - 12/16

●Apprentice through Umos apprenticeship program then hired on full-time at OGC construction *Completed Asbestos Supervisor, Lead Abatement, and Hazmat, trainings/tests and received all 3 certifications *Promoted to Asbestos Supervisor and supervised a crew of 15 guys

●Implemented strict safety procedures reducing work related accidents by 47%

●Provided input, opinion and advice regarding employee performance.-Trained employees on job techniques, safety procedures and equipment use.-Evaluated employees working on the job and communicated performance standards and evaluations to employees.

●Removed lead and asbestos from homes and commercial buildings

●Trained under a Master Electrician and completed 3,000+ hours of electrical training.

●Install repair and maintain Residential & commercial electrical systems including lighting fixtures, electrical outlets, and etc.

●Lead quality installations based on system design specifications and repair faulty equipment and systems

●Conduct job site observations by evaluating other apprenticeship electricians’ work and testing electrical systems and circuits

●Repaired and assembled tools needed for production-Responsible for all dry walling, rough framing, installing carpet, linoleum, tile, siding, doors, windows, painting, roof tear off, demolition

●Pour cement and spread to a flat clean finish. Set up framing walls for cement-Performed Welding, landscaping duties, and all other general/heavy labor duties required

Electrical Panel Assembler/ Machine MaintenanceTechnician/builder/Operator/Crew Lead Assembler/Welder Waste Management,

Germantown, WI

9/08 - 08/12

-Overall maintenance of all equipment and facilities (not limited to production machines).

-Troubleshoot basic to complex operating issues; getting to root cause utilizing data and making recommendations to improve reliability.

-Under the guidance of suppliers and engineering, install and test new machinery or equipment.

-Perform preventive maintenance on machinery or equipment and make recommendations to improve the PM plans.

-Setup and operate basic maintenance shop utility equipment.

-Train others as directed by management.

-Participate in preventative maintenance planning, execution, record keeping

diagnose/perform, pneumatic,hydraulic and electrical repairs

-work from verbal or written instructions, drawings and specifications.

- Used measuring devices and basic diagnostic tools.

● Ensured operation of machinery and mechanical equipment by completing preventive maintenance requirements on engines, motors, pneumatic tools, conveyor systems, and production machines; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting malfunctions.

●Located sources of problems by observing mechanical devices in operation; listening for problems; using precision measuring and testing instruments.

●Removed defective parts by dismantling devices; using hoists, cranes, and hand and power tools; examining form and texture of parts.

●Determined changes in dimensional requirements of parts by inspecting used parts; using rules, calipers, micrometers, and other measuring instruments.

●Adjusted functional parts of devices and control instruments by using hand tools, levels, plumb bobs, and straightedges.

●Maintained equipment, parts, and supplies inventories by checking stock to determine inventory level; anticipating needed equipment, parts, and supplies; placing and expediting orders; verifying receipt.

●Troubleshoot various machines for day to day operations which increased productivity

●Assembled & wired electrical panels/boxes to keep machines operating for production which increased productivity by 29%

●Responsible for operating Forklift.-Correctly and efficiently move products between delivery vehicles, staging area and storage.

●Assemble mechanical components using blueprint, shop order specifications, and bill of materials.

●Completed many welding projects ahead of schedule and thousands of dollars under budget

●Applied Flux Cored Arc/GMAC Welding process for all position weldings

EDUCATION:

Oak View High School - HSD / Milwaukee, WI

WWTC-Welding certification - La Crosse,WI

Contact this candidate