AMIT KUMAR

H.N.**, Sec.-*, R.K. Puram, Delhi

Mob. +91–991*******

Skype: amitkr

E-mail: adqv7x@r.postjobfree.com

Objective: An accomplished Piping Engineer with 15 years employment executes Power plant layout, piping Engineer, design process, drafting and modelling activities within time frame and budget for oil & gas, process, and power plants. Looking for a Piping Engineer position along with sponsorship.

Education& Qualification

B.E. in Mechanical Engineering from Jamia Millia Islamia, New Delhi Diploma in Piping Engineering from G.B. Pant Polytechnic, New Delhi. Skills

Technical knowledge in Piping Engineer, Process, Power plant design, Equipment’s, piping layout and supports, design, draft, Isometric, equipment details drawings and review.

Having Experience in Oil & gas.

Preparation of Technical Specifications and Design calculations.

Detailed engineering drawings.

Should be able to develop Plot Plan, Equipment Layout, and Mechanical, Piping Layouts.

Modeling of Piping, Equipment, Supports using PDMS.

Proficient user of AutoCAD Plant3D, AutoCAD, Navisworks.

Having Experience in Power plant Projects.

Having Experience in Pre-FEED, FEED and Detail Engineering.

Involved in Preparation and Checking of Isometrics, Nozzle Orientation, Piping Layout, Equipment Layout and Plot Plan.

Having Experience in Pipeline Spool GA, Spool Isometric and Alignment Sheets.

Strong ability to develop and enable Auto CAD & PDMS presentation to clients and decision makers.

Knowledgeable in engineering organization structure, the function of each discipline.

Competent and confident in working autonomously and prioritizing the workload.

Capable of guiding co-workers.

Software Competencies

AutoCAD : 2007 to 2020

PDMS-11.5, 11.6 & 12 : Mechanical, Piping & Equipment

AVEVA E3D : Mechanical, Piping & Equipment

Employment

TRACTEBAL ENGINEERING LIMITED, GURGAON, INDIA

Piping Engineer - January 2021 to Till Date

Project : Barmer Refinery

Client : Rajasthan Government

Mechanical modeling for Pump, Exchanger, Air cooler, Storage tank, utility station, Safety shower rand Rack piping.

Checking/Reviewing of Vendor Submitted drawings Liquid Storage Tank, Nitrogen Tank Power Projects Packages.

Equipment Modeling for Pump, Exchanger, Air cooler, Storage tank and miscellaneous equipment’s.

Develop general arrangement drawings/details drawings & sketches of building details.

Preparing gas intent drawings as built basis.

Review and checking of civil drawings as per mechanical assignment drawing.

Checking/Reviewing of Vendor Submitted drawings.

Wide experience in overall site activities including coordination and communication interface with discipline, clients And colleagues for design work & planning task at site & office.

Comfortable in planning & execution of design activities for through team of engineers, designers and checkers.

Preparing P&ID Drawings, Isometric Drg. Flow Diagrams.

Preparation of P&I Diagram as per given specification by client.

Preparing quantities for use in BOQ from the drawings.

Review and finalization of vendor Drawings.

Modeling for physical and logical supports.

Updating model review comments.

Preparation of GA Drawings.

Client comments updating.

Piping Isometrics and MTOs.

ENKA UK ENGINEERING & CONSTRUCTION LIMITED, SAMAWA, IRAQ Piping Engineer – December 2019 to July 2020

Project : 2X660 MW Gas Based Power Plant, Samawa, Iraq. Client : Iraq Government

Experience in site Execution, Construction, Erection activity of Tanks, Piping, Structure, Damper Boiler, and Turbine & Generation.

Controls equipment installation, alignment and leveling.

Performs functional checks and mechanical completion checks (Pressure & atmospheric vessel).

Co-ordination with Erection & Commissioning Team on technical construction issues Through regular coordination Meetings with MOI (Ministry of Iraq) & General Electric (GE).

BOP & BTG Package regular coordination meetings with MOI (Ministry of Iraq) & General Electric (GE) at site.

Handling all the related issues likes Fabrication, Piping, Welding, Joints, and Steel & Structure.

(Valves, Pumps, Blowers, Compressors, Heat Exchangers, Pressure Vessels, Tanks, Filters).

Reporting to Top management about resource requirement at site, project.

Directs and coordinates engineering activities for the project, interfacing with other discipline and with vendors for expedition of Project.

Scheduling & Monitoring of Material Inspection and dispatch from Vendor Workshop.

Coordination with third party inspection agencies as specified in contract.

Resolve site discrepancy reports with engineering.

Contracts Management & Site activities in depth knowledge of Project requirement Cost, Schedule, Billing process, Payments vendor.

Hacking the material dispatch status & check the material that come for Fabrication on the site.

Done rack for site & taking all the inputs regarding the designing from client.

Handling all the related issues likes Fabrication, Piping, Welding, Joints, and Steel Structure.

(Valves, Pumps, Blowers, Compressors, Exchangers, Heat Exchangers, Pressure Vessels, Tanks, Filters)

Co-ordinate with client.

Wide experience in overall site activities including coordination and communication interface with discipline, clients and colleagues for design work & planning task at site & office.

Comfortable in planning & execution of piping engineering design activities for Power Plant.

CARIN (VEDANTA) INDIA PVT. LIMITED, GURGAON, INDIA Piping Engineer – June.’2019’ to Dec.’2019’

Project : Barmer Refinery

Client : Rajasthan Government

Equipment Modeling for Pump, Exchanger, Air cooler, Storage tank, and miscellaneous equipment’s.

Piping modeling for Pump, Exchanger, Air cooler, Storage tank, utility station, Safety shower and Rack piping.

Preparation of GA Drawings.

Review off fabrication drawings for Process Piping as well as Water, Oil & Gas piping.

Co-ordination with Engineering Team & Engineering Consultant.

Review DBR (Design Basis Report),

Review technical specifications, Data sheet, P&ID & Vendor Drawing.

Review Techno-Commercial Bid & Evaluation, Development of vendor.

Review and finalized basic pipe sizing calculation and piping material specification.

Piping and Layout for all Plot Plan, LP Piping & HP Piping CW, Swass Water Potable Water, Service Water etc.

Responsible for Document processing Receipt, Issue, Storage, Retrieval, Distribution, Transmission, Final Documentation, Compilation, Close-out, Handover, Archives.

Project Management Piping.

DOOSAN POWER LIMITED, GURGAON, INDIA

Piping Engineer – Sep.’2017’ to Dec. ’2019’

Project : 2X500MW Obra-C–Thermal Power Plant

Client : UPRVNL

Preparation of Fabrication drawing

Checking/Reviewing of Vendor Submitted drawings Liquid Storage Tank, Nitrogen Tank Power Projects Packages.

Preparing P&ID Drawings, Isometric Drgs. Flow Diagrams.

Preparation of P&I Diagram as per given specification by client.

Review and finalized plot plan, equipment layout, piping layout, general drawing and detail drawing.

Contracts Management & Site activities.

Review and finalized basic pipe sizing calculation and piping material specification.

Piping and Layout for all Plot Plan, LP Piping & HP Piping CW, ACW, DMCW, Potable Water, Service Water etc.

Project co-ordination and dealings with Clients, Consultants, Vendors and various Inspection agencies.

Review off fabrication drawings for Process Piping as well as Water, Power piping.

Selection of Pressure Piping, Fittings, Valves as per ASME/ANSI/Indian Standards.

Review and finalized vendors drawings and technical specification:

(Water System, Compressed Air system, Firefighting system, Heat ventilation and Air conditioning)

Active technical co-operation with the vendor & Client. SAS (SHAMS AL SABAH) GENERAL LIMITED, DELHI, INDIA Piping Coordinator – Sep. ’2016’ to March ’2017’

Project : 2X300MW Zubair Oil Field Project Amman (Iraq) Client : General Electric (G.E.)

Preparation of HFO, LDO, DM tanks Drawings.

Checking/ Reviewing of Vendor Submitted drawings Liquid Storage Tank, Nitrogen Tank Power Projects Packages.

Preparing P&ID Drawings, Isometric Drgs, Flow Diagrams.

Preparation of P&ID Diagram as per given specification by client

Preparing quantities for use in BOQ from the drawings.

Develop general arrangement drawings/details drawings & sketches of building details.

Preparing assignment drawings as built basis.

Review and checking of civil drawings as per mechanical assignment drawing.

Checking/Reviewing of Vendor Submitted drawings.

Wide experience in overall site activities including coordination and communication interface with discipline, clients and colleagues for design work & planning task at site & office.

Comfortable in planning & execution of design activities for through team of engineers, designers and checkers.

Review and finalization of vendor Drawings.

Preparing Plant Layouts/ Section & details and Co-ordinated service drawings.

Preparing P&ID Drawings, Isometric Drawings, Flow Diagrams.

VEGAZVA ENGINEERING PRIVATE LIMITED, DELHI, INDIA

Piping Dy. Manager – July ’2015’ to Aug. ’2016’

Project : Refinery, Jamnagar, Gujarat

Client : Reliance

Experience in pipe sizing calculation, Specification, PMS, MTO, Valve Schedule, Plot Plan, Piping/Supports

Review and finalized plot plan, equipment layout, piping layout, general drawing and detail drawing.

Preparation of GA drawing preparation.

Preparation of P&ID drawing preparation.

Preparation of Piping Layout drawing.

Preparation of Plot Plan drawing.

Preparation of Support Isometric drawing.

Active technical co-operation with the vendor and Client.

Awareness of Piping Codes ASME B31.1, ASME B31.3

Piping and Mechanical Layout for all LP Piping, CW, ACW, DMCW, Potable Water, Service Water etc. BGR ENERGY SYSTEMS LIMITED, NOIDA, INDIA

Piping Engineer– March ’2009’ to June ’2015’

Project : 2x300MW TRN Thermal Power Plant, Raigarh, Chhattisgarh, (TRN Energy)

: 2X500MW Marwa-TendubhattaTPPUnits#1&2, Distt- Jangir- Champa, Chhattisgarh

: 2x500MW Chandarpur STPSUnits#8&9, Maharashtra (Mahagenco)

Preparation of Plot Plan.

Co-ordination with the relevant department and project consultant for preparation of drawings (GA, P&ID etc) &

Finalizing design specifications.

Engineering Co- ordination with vendors for BOP packages. Activity mainly involve dis checking /reviewing of vend or drawings, equipment’s sizing calculation, water balancing and scoped defining for various packages.

Discussion with Vendors & engineering meetings for technical clarifications.

Preparing Plant Layouts/ Section & details and Co-ordinated service drawings.

Preparing P&ID Drawings, Isometric Drag. Flow Diagrams for Power Projects.

Develop general arrangement drawings/details drawings & sketches of building details.

Review of vendor drawings & approval of drawing/document before submission to the Client/Consultant

Review and checking of civil drawings as per mechanical assignment drawing.

BHARAT HEAVY ELECTRICAL LIMITED

Piping Designer – Jan. ’2008’ to March ’2009’

Project : 2X300MW Thermal Power Plant, Anpara-D, M.P. Client : M.P.

Preparation of P&ID ACW, CW, DMCW, Potable, Service Water, Drinking Water & Compressor House

Preparation of ACW, CW Pump House, Raw Water Pump House.

Awareness of Piping Codes ASME B31.1, ASMEB31.3

Preparation of CW pump house GA & cross sectional drawing & Fabrication drawing.

Selection of Pressure Piping, Fittings, Valves as per Standards codes.

Selection & modelling of pipe supports for critical and Non-Critical Lines.

CW Pump house GA drawing preparation.

Preparation of Valve schedules all water system.

Review and finalization of vendor Drawings.

Active technical co-operation with the vendor, Client.

CW Pump house GA drawing preparation.

Preparation of Valve schedules all water system.

Review and finalization of vendor Drawings.

Preparation of Plot plan, GAD, Manual MTO.

Preparation of Pipe Size Calculation.

Preparation of Bill of Quantity.

Preparation of Plot plan, Pipe Size Calculation. MACAWBER BEEKAY PRIVATE LIMITED

Piping Engineer – August ’2006’ to Dec. ’2007’

Project : 2X300MW Thermal Power Plant

Client : Jharkhand

Pipe erection along with pipe support fabrication and erection.

Reviewing design layout drawings, isometric drawing, and P&IDs.

Preparation of Bill of material and execute the pipes pool fabrication as per isometric drawings.

Responsible for the site fabrication, testing of on-plot pipe work.

Preparing Piping Fit up Alignment Reports.

Ensure safe work handling & Scheduled safety instruction etc.

Supervision for Ash handling system.

Liaoning with SAIL authority

Execution of handling of solid waste management.

Coordination with Clients.

Supervision off fabrication at site work.

Experienced in working in various areas of Project Management like: Project co-ordination, Engineering Co-ordination, Contracts Management & Site activities. In-depth knowledge of Project requirement, Scope, cost, schedule, billing process, payment terms.

Personal Details

Father Name : Shri Ganga Saran

Nationality : Indian

Date of Birth : 04thAug.1981

Marital Status : Married

Present Address : H.N.94, Sec.-8 R.K. Puram, NewDelhi-22 AMIT KUMAR Date:

Contact this candidate