EXPERIENCE
Testing and Commissioning Engineer at Gulf Snipe Engineering and Construction LLC, UAE
December 2019-present
Testing and Commissioning Engineer at Voltech Engineers PVT LTD, Chennai, India
June 2016-December 2019
KEY SKILLS AND JOB DESCRIPTION
Testing and Commissioning of Switchgears, GIS, Control & Relay panels, Distribution boards, Transformers, Generator, Motors and Power System equipment
Configuration and Testing Feeder protection relays, Transformer differential protection relays, Line differential protection relay, Line distance protection relay, Motor protection relays, Generator protection relays, Bus Bar differential protection relays
Configurations and Testing Numerical Protection IEDs from manufacturers Siemens, ABB, Alstom, Schneider and GE
Knowledge in IEDs software such as PCM600 (ABB), Digsi (Siemens) Enervista UR Setup (GE), S1 Agile (Alstom) and Micom S1 Studio (Schneider)
Configuration GOOSE between IEDs to IEDs
Creating and Configuring IEC61850 station, Signal testing for SCMS, DMS, ECMS, EAMS, PMS, SAS etc.
Project file preparation, configuring, modification and testing
Testing of Switchgear Equipment like Current Transformer, Potential Transformer, Circuit Breaker, Isolator, Lightning arrester
Performing FAT and SAT procedures, Test report preparation
Working with safety, following HSE procedures, complying QA and QC requirements.
Maintenance of substation, power plants, Transformers, Switch gears, GIS
PROJECTS & CLIENTS
I have tested and commissioned many Transformer, Line, Motors, Bus Bar, Generator Feeders in various Public Sectors and Private Sector.
I have been assigned to many projects under MNCs like ABB, GE, SIEMENS, ALSTOM and Schneider
I have done many projects in Public Sectors such as ADNOC, TRANSCO, SUCO, TNEB, RRUVNL, RGBPL, MSETCL, NTPC, PGCIL, and etc.
I have done many projects in private Power Generation companies such as HYFLUX, JSW, MALTHEY WINJE, KEC, ACC, SIEMENS GAMESA, LAKDHANAVI LTD, AL MOSTAJED, BORUKA POWER and etc.
I have done many projects in EPCs like PETROFAC, ARCHIRODON, FORTUNE, NCC, KEC, L&T and etc.
PROJECTS IN OVERSEAS
Site: EPC QUSAHWIRA PHASE II FIELD DEVELPEMENT PROJECT, Abu Dhabi
End Customer: ADNOC
Client: M/s PETROFAC
Nature of Work:
33KV Buffer transformer Feeders with IEDs 7UT613, 7SJ82, Scheme checking, Configuration and Testing.
33KV Motor Feeders with IEDs 7UT612,7SJ82, and 7UM622 Scheme checking, Configuration and Testing
33KV BCU Protection with IEDs 7SJ64, Scheme checking, Configuration and Testing.
11KV Motor Feeders with IEDs REM620,REF615, Scheme checking, Configuration and Testing
11KV Feeders with IEDs REF620, Scheme checking, Configuration and Testing
11KV Bus differential with IEDs RED615, Scheme checking, Configuration and Testing
Supporting to SCMS With interface signal Testing
Schematic red line markups, modification and updating as per site condition
Supporting to Primary Injection and Secondary injection for GIS and Switchgears.
Site: EPC QUSAHWIRA PHASE II FIELD DEVELOPMENT PROJECT, Abu Dhabi
End Customer: ADNOC (POWER SKID)
Client: M/s PETROFAC
Nature of Work:
0.415KV Incomer Feeders with IEDs 7SJ82 Scheme checking, Configuration and Testing
0.415KV Outgoing Feeders with IEDs Simocode pro Scheme checking, Configuration and Testing
Supporting to SCMS signal Testing
Schematic red line markups, modification and updating as per site condition
Supporting to Primary Injection and Secondary injection for GIS and Switchgears.
Commissioning the Substations
Site: EPC FOR AL DABBYA THAMMAMA ZONE B TRNSITION ZONE DEVELOPMENT, Abu Dhabi
End Customer: ADNOC (PHASE-I)
Client: M/s ARCHIRODON
Nature of Work:
3.3KV and 0.415KV Feeders with IEDs 7SJ82, Scheme checking, Configuration and Testing
3.3KV Transformer Feeders with IEDs 7UT85 Scheme checking, Configuration and Testing
Supporting to IFAT signal testing.
Schematic red line markup, modification and updating as per site condition.
Site: EPC FOR PROCESS CONTROL & POWER SYSTEM UPGRADE AT BAB, Abu Dhabi
End Customer: ADNOC (IFAT AND RELAY TESTING COMISSIONING)
Client: M/s FORTUNE
Nature of Work:
3.3KV and 0.415KV Feeders with IEDs 7SJ82, Scheme checking, Configuration and Testing
3.3KV Transformer Feeders with IEDs 7UT85 Scheme checking, Configuration and Testing
Supporting to IFAT signal testing.
Schematic red line markup, modification and updating as per site condition
Site:, WORKSHOP AND WEREHOUSE BUILDING AT TAWEELAH, Abu Dhabi
End Customer: ADNOC (Sour Gas)
Client: M/s SAS CONTRACTING
Nature of Work:
0.415KV Feeders with IEDs 7SJ82, Scheme checking, Configuration and Testing
Supporting SCMS signal checking. Workshop And Warehouse Building At Taweelah
Site: 500 MLD WATER DESALNATION PLANT, Algeria
End Customer: M/s HYFLUX, Algeria (MAINTANCE TESTING AND COMISSIONING)
Nature of Work:
The project involved in testing of Relay over current, Earth Fault, Motor, Transformer Protection (REF 615, REM 615, RET 615, SEL 751A, SEL 787) In 33KV, 11KV, 6.6KV, 0.415 Substation.
Site: YUGADANAVI 300 MW POWER PLANT, Sri Lanka
End Customer: M/s LAKDHANAVI LTD, Sri Lanka (MAINTANCE TESTING AND COMISSIONING)
Nature of Work:
The project involved in testing of Relay over feeder, Transformer, Generator, Distance Protection, over all Differential Protection (REF525, RET 670, G60, REL670, RED670
Site: SUCO-SEIZ OIL COMPANY, Egypt
End Customer: M/s SUCO, Egypt
Client: M/s TSI Limited, Egypt
Nature of Work:
The project involved in CBs Retrofitting.
Generator relay tripping isolated in panel.
Site: FEWA PROJECTS MORONI AND ANJOUAN ISLAND, Comoros
End Customer: M/s AL MOSTAJED TECHNOLOGIS CO LLC, Comoros island
Nature of Work:
The project involved in testing and commissioning feeder protection (Sepam 40 Series) in 11KV Substation.
Supporting to SCMS With interface signal Testing
Schematic red line markups, modification and updating as per site condition
Supporting to Primary Injection and Secondary injection for Switchgears.
Site: AGATOBWE MANI HYDRO POWER PLANT, Rwanda
End Customer: EUCL, Rwanda
Client: MALTHE WINJE
Nature of Work:
The project involved in testing and commissioning of Feeder, Generator Protection (REF615, REG615) In 50 MW hydro power plant.
Site: SIEMENS LAB
End Customer: TRANSCO, ABU DHABI
Nature of Work:
The project involved in Siemens digsi 5 relay approvals for TRANSCO.
Testing of AVR Relays and configuration.
Site: DHAFRAH PV2 ENERGY COMPANY
End Customer: TRANSCO, ABU DHABI (FACTORY TESTING)
Client: ENERGO CONSULT LLC
Nature of Work:
The project involved in testing of feeder protection (Siemens 7SJ85, Siemens 7SJ82, Reyrolle 7SR230) in 400/33 KV.
Testing of fault recorder relay (Siemens 7KE85) in 400/33 KV.
Testing all auxiliary relay tested.
Scheme checked Schematic red line markups, modification and updating as per site condition.
Site: 132/33kV SUBSTRATION (RIMA).
End Customer: PETROLEUM DEVELOPMENT OMAN
Client: SPECIAL TECHNICAL SERVICE.
Nature of Work:
The development of 33kV switchgear upgrade project.
To modified spare feeder to Line feeder.
To modified OHL feeder to Transformer feeder.
PROJECTS IN DOMESTIC:
400/220/110 KV GIS, NR ELECTRICAL CO & LTD,CHENNAI
11/0.415 KV SWITCH GEAR IOCL, HALDIA
4*400KV SWITCH YARD,RGBPL, RATANAGIRI MAHARATRA
220 KV JINTAL STEEL & POWER LTD, MAHARATRA
765 KV STERLIGHT, MAHARATRA
40 MW SOLAR POWER PLANT, JINTAL STEEL & POWER PLANT, MAHARATRA
HPNC, VIZAG STEEL PLANT, LINDE INDIA LTD, VIZAG
110/33KV OUTDOOR GIS, TNEB, CHENNAI
66/6.6KV SWITCH YARD, VEDANTA INDIA LTD, RAJESTAN
11KV /0.415KV SWITCH GEAR, VEDANCH & UNISEVEN, RAJESHTAN
110/22KV OUTDOOR GIS, FORD, CHENNAI
CENTURY CEMENT POWER PLANT, CHHATTISGARH, RAIPUR
ACC CEMENT POWER PLANT, JAMUL, CHHATTISGARH
ULTRA TECH CEMENT LIMITED, TADIPATRI, ANDRA PRADESH
RAJSHREE SUGAR & CHEMICALS LIMITED, MUNDIYAMPPAKKAM, VILUPPURAM
EDUCATION
Bachelor of Engineering in Electricals and Electronics Engineering at Pallavan college of Engineering, Anna University, Chennai
Year 2012 – 2016
PERSONAL DETAILS
Father’s Name – Pandurangan U
DOB – 28/09/1994
Nationality – Indian
Languages Known – Tamil, English, Hindi
Permanent Address - 195, Senjivirayan pettai Thirumalpur,
Ranipettai (DT), Nemili (TK),
Tamil Nadu – 631051, India
Passport No – Z4017216
Passport Expiry date – 17/04/2027
DECLARATION
I hereby declare that the information furnished above is true to the best of my knowledge and belief.
Date:
Place: Abu Dhabi
(Sakthivel Pandurangan)
SAKTHIVEL PANDURANGAN
TESTING AND COMMISSIONING ENGINEER (5+ YEAR)
PROFILE
Knowledgeable electrical site engineer with years of experience and a proven track record to handle large-scale projects. Resourceful leader who knows how to manage a team effectively and ensure everyone is working in a productive, safe manner. Exceptional planning skills that allow me to come in for a majority of the projects I have worked on in the past.
CONTACTS
************.*@*****.***
Building No – C120,
Shabiya - 09, Musaffah
Abu Dhabi, UAE