A. RATHINAVEL Mail Id’s:adqt74@r.postjobfree.com

adqt74@r.postjobfree.com

Mobile: +91-979*******

CAREER OBJECTIVE

To pursue a highly challenging career in RCC and Steel Structures Designing, this will utilize my skills and abilities for the development of the organization and to develop my technical and personal straits. CAREER DETAILS:

SUMMARY

A Post Graduate Civil Engineering with 22+ years of experience in Project coordination, leading an engineering team, Analysis & Design of various Structures in Power Generation Industries & Oil and Gas Industries, Cement Production industries. With 17 years’ extensive experience in RCC & Structural Steel designing, 5+ years’ experience in execution of various residential and Industrial buildings. Achieved stipulated time schedule for 11000 MT capacity steel structure of CHP plant, varies tall TP’s completed on time within budgeted quantity and 115m high pre-heater structure delivered within one month EMPLOYMENT DETAILS:

1) M/s TECNIMONT Pvt. Ltd, Mumbai

Deputy Chief Engineer, Civil &Structural Dept. (Jan’19-Apr’21) Role: Project Co-ordination, Analysis & Design of ongoing feed and detail engineering projects, reviewing the design documents and drawings prepared by modeling team, attend the project meetings Clients/ Projects:

Amur Gas Chemical Complex-AGCC- EPSS phase for PE, PP & LAO Units for Amur Gas Chemical Complex to be built in Svobodny, Amur Region, Russian Federation

Prepared Detail Engineering consists of Cycle Gas Compression shelter, Common Extrusion building, Loop reactor structures, Blow down Structure, Vent recovery area structures, Reaction area structures, Butene area Pipe rack structures, Purification area Pipe Rack Structures. ZPCC –Zhejiang Petroleum & Chemical Co., Ltd (Feed & Detail engineering for 300 kta LDPE/EVA Lupotech T, 400kta LDPE Lupotech T common facilities), PR China

Prepared feed and Detail Engineering details consists of Compression shelter, Polymerization area, Blowdown Structure, Extrusion building, HP Recycle building, Hot water handling structure, PO dosing, Degassing transport, HP Pipe supports and Pipe racks Xinjiang Tianli Gaoxin Petrochemical Co., Ltd (Feed & Detail engineering for 200 kta EVA Lupotech T), PR China

Prepared feed & Detail Engineering consists of Compression shelter, Polymerization area, Extrusion, HP Recycle building, PO dosing, Absorption Refrigerator building HP Pipe supports and Pipe Rack Structures

JSC Gazpromneft- Omsk Refinery- Delayed Coking unit (DCU), Omsk, Russian Federation

Prepared engineering details consists of ground level pipe supports and Pipe racks with associate foundation

Coordination and review of squad check comments on RDI drawings provided by various discipline

2) M/s MARVEL STRUCTURAL CONSULTANT, Chennai

Manager- Civil- Structural Engineering (Jan’18 – Dec’18) Role: Project Co-ordination with Client & sub-consultant, lead entire team for ongoing projects, Reviewing the design documents and drawings prepared by Civil-Structural Department, attend the Client meetings & Sub-consultant meetings

Clients/ Projects:

TCE, Bangalore -2x660MW TPEP - Civil & Structural works for Obra’c’ CHP Structures FSO Designs Pvt. Ltd., Chennai – Various Industrial and Commercial buildings METEC Construction Tech. Pvt. Ltd., Chennai – Foxconn. Industries Building PTK Project Consultants LLP, Chennai - M/s Jamna Auto Industries India Ltd Hyundai Motor India Ltd., Chennai - Proposed Bus Parking Shed & Eqp. Maint. Shed Avant Garde Engg. Consultant Pvt. Ltd., Chennai – TG Buildings at Various locations SOUTHERN RAILWAY - PALAKKAD.JN, Kerala - PRO. Extension of MEMU Shed & HL bay Structures Elsytec Power Projects Pvt Ltd., Chennai - EXTN. OF 230KV TIRUNELVELI GIS SUBSTATION. Responsibility:

Preparing the Man hour quotation for all RFQ / Enquiries and submit to marketing department

Preparing the project schedule and deliverable list as per client requirement.

Monitoring the submission of Documents and drawings as per project Schedule

Accorded approval from clients for design document and G.A. Drawings prepared by Marvel.

Attended project technical & project review meeting at Client office and also our sub-consultant office

Reviewing and quality assurance for the Analysis, design details and G.A. Drawings prepared by our team and sub-consultant

Reviewing the Analysis, design details and G.A. Drawings for PEP structures and Industrial structures prepared by our team

3) M/s CITEC ENGINEERING INDIA Pvt. Ltd, Chennai

Lead Engineer Civil- Structural Design (Mar’15 – Nov’17) Role: Project Co-ordination with sub-consultant, Analysis & Design of ongoing projects, Reviewing the design documents and drawings prepared by Civil-Structural Department, attend the Client meetings & Sub- consultant meetings.

ZapSib-2 Project (Sub Contract from M/s. Linde, Detail Engineering for Ethylene Cracker Unit), Russia

Attended project technical review meeting at Client office and Sub-consultant office

Monitoring the submission of Documents and drawings as per project Schedule

Analysis and design for Technological Structures, Main pipe racks and field supports

Provide the Input details for preparation of G.A. of Structural and Civil details to Tekla drafting team, checking the delivery details of G.A. / Fabrication drawings from the drafting section

Reviewing the Analysis and design details for many Technological Structures and pipe racks

(more than 30 Technological structures and 10 Pipe racks)

Reviewing the details of G.A. / Fabrication drawings for Technological Structures and pipe racks 4) M/s POWERTEC ENGINEERING Pvt. Ltd, Chennai

Manager Civil- Structural Design (June’09 – Feb’15) Role: Project Co-ordination, Analysis & Design of ongoing projects carried out by the Civil-Structural Department, Reviewing the design documents and drawings, attend the Client meetings & Site visit. Clients/ Projects:

MUNPL (2X660 MW MEJA Thermal Power Plant – CHP Package), Allahabad, UP

Project Coordinator, attended project technical review meeting at Client Office and Project site

Monitoring the submission of Documents and drawings as per project Schedule

Analysis and design for Coal handling structures like Transfer tower, Conveyor gallery, Crusher House, supporting trestles, stacker & re-claimer, Track hopper & Underground Tunnel.

Prepare the Load calculation, Design result and report for above mentioned Structures

Provide the Input details for G.A. of Structural and Civil to CAD section, checking the delivery detail of G.A. / Fabrication drawings from the CAD section

Analysis and design for various BOP Buildings (Cable rack, pipe rack, MCC buildings & Pump houses)

Accorded approval from clients for various design document and G.A. Drawings prepared by Civil department.

KPCL Project (1x500MW- II nd

Extension for the Plant-CHP package), Bellary, Karnataka.

Reviewed the Analysis, design document and detail drawings for CHP structures like Transfer tower, Conveyor gallery, supporting trestles and Stacker & Re-claimer prepared by sub-vendors.

Analysis and design for various BOP Buildings (Like -MCC Rooms, HTSG Building.,.). RRVUNL Project (1x165MW- III rd

Stage for the Plant), Ramgarh, Rajasthan.

Prepared the Pre-bid engineering work like DBR and BOQ.

Prepare the design basis report, detailed project report, Technical specification and Co-ordination

& preparation of Plant layout with Mechanical, Electrical & C&I department.

Responsible for providing technical support, assisting with the tender stage and pre-bid proposals, Prepared and submitted tender drawings

Analysis and design for various balance of plant Buildings, troubleshooting problems, and solving various construction difficulties

Analysis and design for various Non-Plant Buildings (i.e. Administration building, security barracks, main gate building, Car parking & Town ship package.) NCTPP Project (2x600MW- II nd

Extension for the Plant-CHP package), North Chennai, Chennai

Reviewed the Analysis, design document and detail drawings for CHP structures like Junction towers, Conveyor gallery, supporting trestles prepared by sub-vendors. YTPS Project (2X800 MW YARMARUS TPS CHP & AHP package), Raichur Dist, Karnataka

Reviewed the Analysis, design document and detail drawings for CHP & AHP structures like Transfer tower, Conveyor gallery, supporting trestles, Ash Pipe gallery, Ash dyke d and Stacker & Re-claimer prepared by sub-vendors.

5) M/s INDIAN OIL TANKING DESIGN AND ENGINEERING Ltd, Chennai Lead Engineer Civil- Structural Design (Aug’07 – May’09) Role: Analysis & Design of ongoing projects carried out by the Civil-Structural Department Clients/ Projects:

BSPL Project (Extension for the Terminal), IOC Ltd, Bhogat, Gujarat. Oil & Natural Gas Corporation Limited, Terminal extension, Rudrasagar, Assam. Responsibility:

Analysis and design for various accessories Building, Dyke Wall and Ring wall foundation.

Analysis and design for the Fixed Tank Roof

Analysis and design for the Terminal Building, Workshop and Ware House.

Analysis and design for the Pipe Racks and Supports, Pipe sleepers & Foundation.

Prepare the Load calculation, Design result and report for above mentioned discipline

Prepare the Input of GA, Structural and Civil details to CAD section 6) M/s TIRUCHY ENGINEERING CONSULTANCY HOUSE (TECH), Trichy. SENIOR DESIGN ENGINEER (Feb 07 – July07)

Role: Design & Analysis of projects carried out by the Engineering Department. Client: Deepak Cements &Chemicals Limited, Kuttch, Gujarat (Clinkerization & Grinding plant -2000TPD) Ultra Tech Cements Limited, ARAKKONAM (Up gradation for the Grinding plant (200TPH)) Responsibility:

Analysis and designs like bunkers, clinker stock pile, silos using Excel Spread sheet

Analysis and design for packing plant, raw mill building, cement mill building and MCC rooms using Staad pro.

Analysis and design for Pre-heater building design involving both RCC and STEEL structure about 115 meters Height using Staad pro.

Analysis and design for the proposed packing plant (8-rotary packers)

Analysis and design for the Jumbo Bag house. (17000ton capacity)

Analysis and design for Cement silos-3000ton capacity-2nos-(13.5m and 42m high)

Analysis and design for Cement meal bunkers (300t, 100t capacity)

Design for Drive, inlet & outlet mill foundation for raw mill and cement mill using Excel Spread sheet

Analysis and design for Overhead cable gallery and duct supporting structures using STAAD pro.

Analysis and Design of overhead pipe rack and their supports. 7) M/S CHOLA ARCHITECTS, TRICHY

Design / Senior Engineer (Feb 04 – Jan 07)

RESPONSIBILITY: Execution, Analysis and Design of various projects PROJECTS INVOLVED:

Analysis and design for the Meenakchi kalyana mandapam

Analysis and design for the BHEL Iyapan Temple

Analysis and design for the JB Flats & DEEPA Apartments

Analysis and design for the KKP Spinning & Textile mills main building & mill building in and around Trichy.

Analysis and design for the Residential flats, various commercial building (Hospital) in and around Chennai.

Assist to prepare GA drawing for the above-mentioned buildings by drafting section. 8) M/S SAI BUILDERS, TRICHY

Junior / Design Engineer (MAY 1998 –JAN 04)

RESPONSIBILITIES: Execution, Analysis and Design of various projects. PROJECTS INVOLVED:

Analysis, design and execution for the various Residential buildings and flats

Analysis, design and execution for the RCC & Steel structure in and around Trichy.

Design and execution of main building for Spinning & Textile industries. FAMILIAR WITH DESIGN CODES:

Indian Standards:

IS 456, IS 800, IS 875, IS 1893, IS 2974, IS 3370 & IS 2911, IS 13920 Russian Standards:

SP 16.13330.2017, SP 20.13330.2016, SP 63.13330.2012 & SP 52-101.2003 Known Standards:

British Standards: American standards:

BS 8110, BS 6399 & BS 5950 API-650, ACI 318 & AISC,ASCE EDUCATIONAL QUALIFICATION:

PG Degree : M.E –Structural (Distinction), Sathyabama University / 2010. : UG Degree : B.E Civil (First Class), Regional Engineering College (NIT), Trichy / 2003 Diploma Course : Diploma Civil Engineering (Honors), SCSM Polytechnic, Salem / 1998 Software knowledge : AUTOCAD, TEKLA, STAAD PRO, ANSYS, SAP2000 PERSONAL DETAILS:

Permanent Address : No.: F-5, 1st Floor, Sri Aishwaryam Homes, Vadakkupattu road, Medavakkam,

Chennai-600100, Tamil Nadu, INDIA.

Languages Known : TAMIL, ENGLISH, HINDI, KANNADA

Date of Birth : 15-OCT–1979

Parent’s Name : Arumugam - Angammal

Nationality : Indian

PERSONAL TRAITS:

- Hardworking, Motivated

- Initiator, highly interactive, Team Player

Contact this candidate