PERSONAL INFORMATION

Name: Edgar Ignacio Cuadros Bastidas

Identity card : 91268032

Location: Piedecuesta, Santander-Colombia

Address: Calle 7N N 7-12 Junin1 Apart 301

Phone : - 324-***-****

Marital status Married

Email: adqstt@r.postjobfree.com

adqstt@r.postjobfree.com

PROFESSIONAL PROFILE

Trained experienced management professional technologist management systems, internal audits, Process Control, Quality Control, metrologist mechanic, operation of industrial plants and mechanical maintenance and / or electronic,

Also I have skills as Operator Industrial Skilled Trades.

I am a responsible, dynamic, eager to succeed and my goals are based on the achievement of clear objectives ; I learn quickly and fill up properly with punctuality, honesty and responsibility in the different activities I do.

Ready to meet the different functions, duties and labor standards they have set, I stand with great enthusiasm your company to be part of the fulfillment of goals set out in its mission.

I can work of the difirent job assignments and specific duties

Skills

Good Reading and writing in English

Good communication

Ability to follow specific instructions.

Ability to interact with people.

Adaptability to work. Responsibility and commitment to the company . Teamwork. I respect my colleagues and superiors . Willingness to learn . Compliance with safety standards. Emergency response . Self-care. Risk prevention. Attention to detail. Care and maintenance of equipment in charge. Organization and time management. Methodical.

With capacity of work in carrying out the following activities:

-Management Of equipment for measuring voltage levels medium voltage, low voltage and control signals.

-Comply Safety regulations for work on electrical systems, as is the safe isolation of electrical equipment before allowing staff to work on the computer.

-Computer Maintenance and repair of equipment and electrical systems, switchboards, electric motors, generators and electrical equipment and DC systems

To detect electrical malfunctions of the machines, troubleshooting and measures to prevent breakdowns

-Construction and operation of electrical equipment for testing and measuring

-The Interpretation of electrical diagrams and circuit diagrams (PID).

-Setting and basic operating principles of the following electrical, electronic equipment and control:

Knowledge generation systems .

Prepare, launch, coupled induction motors.

Perform installations in high and medium voltage.

Identify the characteristics of the basic elements of electronic circuits and interpretation of flow diagrams and automatic control systems

Installation of instrumentation for measurement and process control, according to the specifications given in the manuals of the manufacturer. ( Pressure transducers, digital scale, level sensors and process control signals, controllers, variable speed drives, RTD, Resistance, Thermocouples, Manometers ) .

WORK EXPERIENCE - FUNCTIONS AND ACHIEVEMENT

Petroleum unit operator

Industrial Plant Operator TIP LTDA - ICP ECOPETROL-COLOMBIA

Piedecuesta, Santander – March 2021 - actual

Julio 1017 - Octuber 2017

March 2012 - December 2016

• Conduct of runs with hydrocarbon products according to the conditions set by the customer ECOPETROL

• Conduct process control during operation from the console and patio; in the control variables of pressure, temperature, flow. Opto 22 software.

• Perform maintenance reactors.

• Perform Enlistment and tuning of the unit to ensure proper operation of the unit during operation safely.

• Perform assembly and coatings kawool lines and mummy to thermally insulate heating resistors and pipelines for water vapor.

• Installation of power resistors in the process lines.

• Installation of valves, actuators and checks on the activities of corrective and preventive maintenance.

• Fill out the documents required by the quality management system, occupational health; such as check list, work permits, logbooks.

• Perform proper handling of samples taken during the run for analysis.

• Perform preventive and corrective maintenance unit.

• Perform the correct disposal of hazardous waste generated during operation.

• Interpretation of drawings P & D in industrial plants.

• Conduct structured rounds equipment and industrial plants.

•Operate electronic or computerized control panel from a central control room to monitor and optimize physical and chemical processes for several processing units

•Monitor, adjust and maintain the plant units and equipment in control of process and sure the operation plants.

•Control process start-up. Shutdown and troubleshooting in form sure.

•Monitor outside process equipments of the plant.

•Adjust equipment, valves, pumps and controls and process equipment.

•Shut down, isolate and prepare process units or production equipment for maintenance.

•Sample products and record data on process operations.

•Participate in safety audits HSE and programs defined to respond to an emergency.

WORK EXPERIENCE - FUNCTIONS AND ACHIEVEMENTS

Quality Control Coordinator

MEDIIMPLANTES S.A. - Bucaramanga, Santander – March 2018 to October 2020

• Perform inspection and verification to the medical devices, surgical instruments and generate their respective quality certificate. ISO 13485

• To implement the plans established quality assurance for product quality.ISO13485

• Perform physical-chemical tests in accordance with the procedures required by the ASTM standards at raw material and finished product

• Report and Inspect nonconforming product and define its final destination.ISO 9001

• Check the quality of the product in its dimensional part, finishes, identification, storage and packaging.

• Updating procedures for testing and trials.

• Support to the operational area in solving technical problems.

• Analysis of product nonconforming indicators.

• Ensure proper use and operation of the instruments and activities the job team.

• Perform correct identification of chemical reagents, as well as its good disposal.

• Participate in the quality committee for the generation of corrective, preventive and improvement actions.

Coordinator and laboratory management systems.

Extrucol S.A. - Bucaramanga, Santander - Jan. 2010 to Jan. 2012

• Administer and manage management systems under ISO 9001: 2008 and ISO 14001: 2004

• Manage management system accredited laboratory EXTRUCOL S.A under the NTC-ISO / IEC 17025: 2005.

• Obtaining and maintaining product quality labels with ICONTEC-SGS.

• Participation in standardization committees piping ICONTEC.

• Active participation in the environmental committee of the ANDI-BUCARAMANGA

• Manage and execute the internal audit program to business processes EXTRUCOL S.A.

• Coordinate and schedule the committee Corrective, preventive and improvement actions for the internal processes of the company

• Internal Auditor in HSEQ systems.

• Schedule and monitor audits certification by ICONTEC, SGC and ONAC.

• Program audits product quality during the current year, domestically and requested by customers outside the country (Peru-Panama-Ecuador).

• Updating procedures.

• Coordinate meetings quality review system in an integrated manner.

• To monitor and verify the closure of the NC for each management systems.

• Conduct support the commercial area on technical issues and product standards.

• Promote the inclusion of new accredited lab testing company.

Metrologist Mechanical

EXTRUCOL S.A. - Bucaramanga, Santander - June 1996 to December 2010

• Performance as Metrologist in the calibration of equipment and instruments. In the dimensional quantities, pressure, temperature and uncertainty calculation.

• Manage the calibration of equipment and instruments with certified service companies.

• Manage and perform the calibration program established.

• Perform identification tools and inclusion in the program of metrology with your resume to ensure traceability.

• Manage the purchase of instruments and equipment required in the production plant and quality control laboratory.

• Perform calibrations on site as well as the installation required in the production plant.

• Lead and manage the program metrology company Extrucol S.A.

• Develop and implement the program calibration set for the plant area and accredited laboratory.

• Perform calibration procedures for instruments variables: Dimensional, pressure, vacuum and temperature; in order to establish their errors and associated uncertainties. (Deprovision the instruments according to the results recorded).

• Install the instrumentation required in the production plant and equipment.

• Ensure the calibration of instruments and test equipment accredited tests, in accordance with the requirements of the NTC-ISO 17025.

• Review and update procedures Metrology calibration process.

QA/QC

EXTRUCOL S.A. - Bucaramanga, Santander - June 1996 to December 2010

• Perform inspection and testing to the raw material and generate their respective quality certificate.

• To implement the plans established quality assurance for product quality.

• Perform physical-chemical tests in accordance with the procedures required by the ASTM-NTC-ISO-UNE standards

• Inspect nonconforming product and perform the tests required to define its final destination.

• Check the quality of the product in its dimensional part, finishes, identification, storage and packaging.

• Updating procedures for testing and trials.

• Support to the operational area in solving technical problems.

• Analysis of production orders through statistical process control.

• Ensure proper use and correct operation of the test equipment and laboratory analysis.

• Perform correct identification of chemical reagents, as well as its good disposal.

• Keep updated safety data sheets of the chemical substance.

• Participate in the quality committee for the generation of corrective, preventive and improvement actions.

Instrumentalist

• Technologist electronics with ability to install measuring instruments in industrial plants such as: pressure transducers, digital scale, level sensors and control signals processing,controllers, variable speed drives, RTD, Resistance, Thermocouples, Manometers, Valves and actuators.

• Identification of control loops diagrams and drawings P & D

• Corrective and preventive maintenance of electronic equipment, control systems and power supplies .

• Check the operating status of the implementation of the unit. ( Pressure transducers, digital scale, level sensors and process control signals ) controllers, variable speed drives, RTD, Resistance, Thermocouples, Manometers

• Use the signal detection instrumentation for medium voltage and Multimeters Amperemeter .

Instructor - Installer polyethylene networks for infrastructure projects natural gas and water sector.

EXTRUCOL S.A. - Bucaramanga, Santander - January 1996 to December 2010

• Instructor and trainer networks piping systems Polyethylene (PE) joined by hot melt systems go - socket, and electrofusion saddles; with experience at national and international level.

• Perform installation catalogs binding procedures SOCKET, BUTT, Saddles and ELECTROFUSION.

• Support to companies nationwide to its group of technical staff in the permanent updating procedures for joining thermoplastic pipes.

• Field Support clients at the start of works with product handling in the field.

• Field Support clients for proper operation of thermofusion machines, maintenance and execution of procedures for joining pipes by heat fusion method.

• Check the condition of the equipment used for joining PE pipes.

• Customer training in the laboratory of the company and work sites handling equipment, handling and storage of the product.

• Operation and maintenance manuals, electrical, hydraulic and electronic equipment.

• Perform manual faults and solutions for thermal fusion bonding procedures.

• Operate equipment of low, medium and high range as brands: MKCELROY, RHYTHM CENTRAL.

APPLIED STUDIES

Auditor - Internal Auditor SGS -2022

Quality - Integrated management systems SGS -2022

Diploma - ICONTEC -2008 Update HSEQ system auditor

Diploma - Diploma in Metrology UDI -2007

Auditor - Internal Auditor UIS HSEQ -2005

Quality - Integrated management systems UIS -2005

Technological units of Santander electronics Technologist February 1996 - December 2000

COURSES

TIP ICP - Advanced Course working at heights

TIP ICP Petroleum Chemistry.

TIP ICP Biodiesel.

SENA electrical services installations

SENA Design and construction of switchboards .

Operation and installation of rotating electrical machines .

SENA Interpreting Blueprints 1

SIC Internship temperature

SIC Internship pressure .

SIC Internship Industrial measurements

SIC Internship Measurement uncertainty .

WORK REFERENCES

Company: MEDIIMPLANTES S.A.

Cargo Area : Quality Control Coordinator

Duration : 2 years AND 8 months

Direct superior .: Orielson Cruz Amaya

Phone:

313-***-****

Company: T.I.P. LTDA . - ICP- ECOPETROL

Cargo Area : Operator plant- non-catalytic processes .

Duration : 6 years.

Direct superior .: Jhon Freddy Mantilla.

Phone:

318-***-****

Company: EXTRUCOL S.A.

Cargo Area : Quality assurance .

Duration : 24 months.

Direct superior : Jorge Eleazar Castellanos

Phone: 57- 6761940 Ext. 103

Company: EXTRUCOL S.A.

Cargo Area : Inspector: Production plant - Quality

Metrologist - Instructor instrumentalist

Duration: January 1994 - 16 years

Direct superior : Jorge Eleazar Castellanos

Phone:57- 6761940 Ext.115

Edgar Ignacio Cuadros Bastidas

C.C. 91268032 Bucaramanga –Santander -Colombia

Contact this candidate