Principal Piping Designer Sr. Pipe Designer Field Engineer

PERSONAL RESUME

ROBERT LEE HENDERSON, JR.

US ARMY(Veteran)

*** ********** ***** *. ******: 412-***-****

Evans, GA 30809 E-mail: ************@********.***

E-mail: ****.**.**@*****.***

EDUCATION:

* Valdes Engineering Company, IN, 2018 – CADWorx Plant Professional Piping / Equipment

* Intergraph Training Center, Huntsville, AL, 2015 - Intergraph SP3D Piping / Equipment

* Bechtel National, Richland, WA, 2001 - Microstation PlantSpace Design Series(3D)

* Bechtel National, Richland, WA, 2001 Microstation TriForma(3D)/Support Modeler(3D)

* Bechtel National, Richland, WA, 2001 - Supervisory Training

* John Brown Engr., Bridgewater, NJ, 1995- Silicon Graphics PDMS(3D)Pipe/Equipment

* Badger Engineers, Boston, MA, 1991 - Intergraph PDS (3D) Piping/Equipment

* Badger Engineers, Boston, MA, 1991 - Omni Pipe/4.0.2 With MicroStation (3D)

* Fluor Daniel, Inc., Greenville, SC, 1990 - Intergraph PDS P&ID's

* Fluor Daniel, Inc., Greenville, SC, 1990 - Supervisory Training

* Virginia Electric Power Co.(VEPCO), Richland, VA, 1988 - Intergraph (2D)

* Gateway Tech. Inst., Pittsburgh, PA, 1982 -Electronic/Electricity

* Westinghouse Corp., Pittsburgh, PA, 1981 - Pipe Stress Analyst

* School of Engineering US ARMY, Ft. Belvoir, VA, 1977 - Heavy Equipment Repair

* University of Dayton, Dayton, OH, 1976 - Mechanical Engineering

* Carnegie-Mellon University, Pittsburgh, PA, 1974 - College Preparatory

SUMMARY OF EXPERIENCE:

* Piping Supervisor * Deputy Area Supervisor * Piping Team Leader

* Lead Piping Designer * Senior Piping Designer * PDS Instructor

* Detail Piping/ISO Checker * Pipe Support Modeler * Piping Stress Analyst

* Senior Piping Designer (General Arrangements, Equip. Loc., Detail Piping Layout, ISO's, Ortho's)

* Senior Piping / CAD Designer Revit BIM 2017; Bentley AESOsim BIM AutoCAD (ver. 9 thru 2018)

Intergraph (PDS Piping/Equip) Bentley (MicroStation 3.0 thru 8.0) Navisworks-Manage/Simulate

Intergraph (IGDS 2D, 3D) CADWorx Plant Professional 2015-2018 Bluebeam

Intergraph (PDS P & ID) LFM (Laser Scanning Software), Cyclone, JetStream

* Plant Space-Design Series (Piping/Equipment / Support Modeler and TriForma Modeling)

* Society of Piping Engineers & Designers - Process Plant Layout and Piping Design Course

* Piping Field Engineer (walk down, revamp, as built, TAR - turn around package) * 7902, 7914 AsBuilt

* Knowledgeable in ASME B31.1, B31.3; ANSI; PIP’s; API; Mils Std.; DOE Spec.; NFPA.

PROFESSIONAL EXPERIENCE:

Oct. 2019 to Present SR. PIPING / EQUIPMENT

DESIGNER

(Staff Hire) Westinghouse Electric Company

Nuclear Power Plants 7828 River Road

Vogtle Plants Unit 3 & Unit 4 Site Waynesboro, GA 30830

Westinghouse designed the AP1000 nuclear plant on Intergraph Plant Design System (PDS) software. Bechtel has been awarded the construction of the two AP1000 nuclear power plant near Augusta, Georgia, with Westinghouse providing guidance and oversight. Plant Vogtle Units 3 & 4 will be the first new nuclear plants built in the U.S. in thirty years.

Plant Vogtle Units 3 & 4 – Balance of Plant, Piping Group. Responsible for activities relating to construction engineering within the piping discipline. Provide technical direction to mechanical field engineering personnel as required, ensuring that the design of AP1000 Plant is maintained throughout construction.

Robert Lee Henderson Jr. Page 2

Westinghouse Electric Company – (SR. PIPING / EQUIPMENT DESIGNER) continues:

Coordinate with construction on design issues relating to the piping discipline such as mechanical equipment installation, piping installation, maintenance, and testing. Coordinate with the procurement group for field procured materials, material substitution, and equipment such as tanks and drums, pipe spools, valves, fittings, and fans and blowers. Addressing my assigned tasks of ESR's, N&D's, RFI's and E&DCR's for fast response and close out. Also responsible for updating the PDS AP1000 models, for Unit 3, Unit 4 and future plants, as required for piping, pipe supports, HVAC, mechanical equipment, ensuring the latest information is reflected in the PDS models which matches the construction.

July. 2018 to Aug. 2019 PRINCIPAL PIPING DESIGNER

(Staff Hire) Valdes Engineering Company

Oil & Gas / Chemical Industry 100 West 22nd Street

Valdes Engineering Company – IN Office Lombard, IL 60148

Various Projects within these plants – BP Amoco Whiting, Ashland ISP Lima and Eastman Chemical are just a few - Piping Design Group. Responsible to work on and, lead, supervise a team of piping designers in feed, conceptual engineering, plant layout and detail design, in stages. Maintain and monitor the budget and schedule for all piping activities, identify and address all staffing requirements for the project assigned to me, to my Piping Manager. Review the basis of design, scope of work and the deliverables require for that project. Visit the site, to review the project, while also setting up the Laser scanning for that project (Cyclone, Jetstream), establish and review the Tie-in locations. While at the site - generate field sketches for new and some existing pipe routing, locating support points, taking photos. With the laser scan and the field sketches in place, start piping routing of the new and some existing piping and equipment, supports and some support steel in the 3D model (CADWorx Plant Professional 2015-2018), request all equipment drawings that are needed from the client document control. Redline P&ID’s and line list as required, produce Isometrics, extract a bulk Bill of Material (BOM), generate a Tie-in list, and generate Demolition photos for the Pre-TAR / TAR (pre –turn / turn around) piping package. Once the stress group has reviewed and approved the Isometrics and the 3D model, prepare the piping package to be checked and then issued IFE (issued for estimating), IFAC (issued for approval), IFC (issued for construction). Navisworks and Bluebeam are a big part of this process for reviewing the 3D model, review and marking up documents. Several projects are being worked simultaneously.

Oct. 2017 to June 2018 PRINCIPAL PIPING DESIGNER

(under contract) TRS Staffing Solutions

Pharmaceutical Industry 100 Fluor Daniel Drive

Fluor – Greenville SC Greenville, SC 29607

Novo Nordisk Project - Diabetes Active Pharmaceutical Ingredient(API)facility in Clayton, North Carolina, Life Sciences and Advanced Manufacturing - Plant Design Group. Responsible for conducting several detail examinations / inspections of the various piping systems that were designed throughout the plant, ensuring the design are with in Novo’s/Fluor’s design standards, prior to the extraction of the piping isometric, utilizing Navisworks Simulate.

With over eight hundred P&ID’s, was involved in checking P&ID’s and provided isometric sheet breaks, also scoping out of P&ID’s– yellowing off once the checkers had completely checked a isometric sheet and pinking off once the isometric sheet was issued for construction, to know exact how much of a P&ID and piping system was completed.

From two different clash reports to eliminate false clashes, and concentrating on real clashes by evaluating, and then making a determination on who will move based on several key factors which included budget and schedule. The two systems used were, Navisworks Simulate Plug-In and Autodesk BIM 360 Glue for these review. Tasked with and heavily involved in the re-baseline effort – an estimate to complete the project.

Robert Lee Henderson Jr. Page 3

Feb. 2017 to Sept. 2017 SR. PIPE DESIGNER

(under contract) ResourceTek, LLC

Automotive Industry 211 Commerce Street Suite 600

BWSC – Nashville TN Nashville, TN 37201

At Barge Waggoner Summer and Cannon Inc. – Continental’s New Commercial Vehicle Truck Tire Manufacturing Plant, a greenfield plant, located in Clinton, MS, with a 4 million tire production per year – Mechanical Group. Responsible for the detail piping design and piping layout of the East/West Pipe Racks, Energy Pit, Energy Tunnel, Curing Trench’s, Compressor Area, Chiller Area (40%), and Boiler Area (25%). Responsible for identifying support types and locations. All work performed on Revit 2017 BIM software, producing plans, section/details drawings.

Sept. 2016 to Feb. 2017 SR. PDS PIPE DESIGNER

(under contract) AirSwift

Oil and Gas Industry 3050 Post Oak Blvd. Suite 1450

Jacobs – Long Beach CA Houston, TX 77056

Chevron El Segundo Refinery - Small Cap Projects – FCC A&B Relief Project - Piping Group - Responsible for design and layout of new piping relief systems from Tie-In locations. The generation of the Tie-In list and upkeep, marking up P&ID's to reflect Tie-In locations and Demolition piping. Also following through with field actives, tagging, client approval and issuing Tie-In Isometrics and Demolition drawings. This is supporting the client and construction pre-turn / turn around schedule. All work performed with PDS 3D model and utilization LFM (Laser Scanning Software).

June 2016 to Sept. 2016 SR. PIPE DESIGNER

(under contract) ResourceTek, LLC

Automotive Industry 520 West Summit Hill Dr.

BWSC – Knoxville TN Suite 1202

Knoxville, TN 37902

At Barge Waggoner Summer and Cannon Inc. – Mercedes Benz Sprinter Van Expansion Project, located in Charleston SC – Mechanical Group. Responsible for the detail piping design and piping layout of the Energy Center, which supplies utilities to the various buildings (Paint shop, Body shop and Assembly building). Responsible for laying out the equipment in the Energy Center – (Chillers, Cooling water pumps, Air Compressors, Cooling Tower, Heat Exchangers, Weld Water Pumps, Air / Water Separator's, etc.). Also responsible to layout the piping within the same building, most lines sizes where 18 inch through 30 inch, and some 4 inch through 10 inch, mostly all lines were insulated. Responsible for identifying support types and locations, defining location of piping structures. All work performed on Bentley AESOsim BIM software, producing plans, section/details drawings.

Feb. 2014 to June 2015 PIPING DESIGN LEAD

(Staff Hire) Saudi Arabia WorleyParsons Arabia LTD

Power Industry Al Khobar / Riyadh

Saudi Arabia

EPCM to design and construct, PP13 and PP14, Two Twin 3x1 Combined Cycle Plants with a generating capacity of 1650 (mw) each, for Saudi Electricity Company (SEC), located near Riyadh Saudi Arabia. - Mechanical Engineering Group - assigned to the Al Khobar office, and will relocate to the Riyadh office shortly. Responsible to lead and supervise a piping design team of engineers and designers in conceptual engineering, plant layout and detail design. Maintain and monitor the budget and schedule for all piping activities, identify and address all staffing requirements for the piping design group. Developed and implemented the PDS 3D modeling (Piping / Equipment / Isometric extraction) training for the local workforce. All work performed on PDS 3D, utilization of Navisworks.

Overseas Assignment – Al Khobar / Riyadh Saudi Arabia

Robert Lee Henderson Jr. Page 4

Sept. 2013 to Feb. 2014 SR. PDS PIPE DESIGNER

(under contract) ASI

Oil and Gas Industry 626 Holcomb Bridge Rd.

Jacobs Houston TX Suite 600

Roswell, GA 30076

Phillips 66 - Small Cap Projects - also assigned to Shell Chemical, Ethylene Oxide Project - Piping Group - Responsible for the generation of the Tie-In list, Hot Taps list, line list and specialty item lists, which also included marking up P&ID's to reflect Tie-In locations and Demolition piping. Also following through the Tie-Ins field actives, tagging, client approval and issuing Tie-In Isometrics and Demolition drawings. In addition, set, locate and design platforms, generate nozzle orientation on various pieces of equipment. Design and layout of new piping systems with PDS 3D model and utilization LFM (Laser Scanning Software), from Tie-In points. Coordinate pipe installation and modification work, pump, tanks and vessels installation and alignment, supporting the client and construction shutdown schedule.

Nov. 2012 to Sept. 2013 PDS PIPING AREA LEAD

(under contract) CDI Corporation

Oil and Gas Industry 200 Public Square

URS – (Washington Group Division) Denver CO Cleveland, OH 44114

Moundsville Fractionation Phase II Plant for Williams located in West Virginia - Plant Design Group – Assigned to the Denver, CO office - Responsible for the layout and detail design of the pipe racks over 2,000 feet plus and all the interconnecting piping to all the various areas, also responsible for layout and detail design of the Process Areas - which included the Depropanizer Area (towers, reboilers, heat exchangers, accumulators, condensers and pumps) and

the Debutanizer Area (towers, reboilers, heat exchangers, accumulators, condensers and pumps). In addition, I resolved complex layout / design issues, correcting and advising, as needed to help complete this project aggressive construction schedule. All work is performed on Intergraph PDS (3D Plant Design System) producing isometrics, for constructible drawings.

Nov. 2008 to Nov. 2012 PIPING TEAM LEADER

(under contract) IDC LLC

Nuclear Industry 337 Spartangreen Blvd.

Westinghouse – (Nuclear Power Plants) Duncan, SC 29334

Cranberry PA / Italy

AP1000 Nuclear Plant template and support of several plants in China and the US. This AP1000 template will be used on all future AP1000 Nuclear Plants and is currently in the final stages of detail design.

The AP1000 is a two-loop, 1000MWe Pressurized Water Reactor (PWR) with passive safety features and extensive plant simplifications that enhance the construction, operation, maintenance and safety. Plant Design Layout/CAE Groups. Responsible for remodeling all major pieces of equipment inside Containment (Reactor Vessel, Reactor Coolant Pumps, Steam Generators, Pressurize, Core Make-up tanks, Accumulators, Passive RHR exchanger and the Hot Leg and Cold Legs) based on the latest vendor prints. I was temporary assigned to Ansaldo Engineering in Genoa, Italy for several months to help this business partner get back on schedule for iso production. Also, responsible for major reroute/detail design layout inside containment for various systems (RCS reactor coolant system, PXS passive core cooling system, PCS passive containment cooling system and others), incorporating (DCP’s) Design Changes Program. Known as the go to guy, to resolve complex layout issues. All work is performed on Intergraph PDS (3D Plant Design System) producing isometrics, for constructible drawings.

Overseas Assignment – Genova, Italy

Robert Lee Henderson Jr. Page 5

Oct. 2005 to Nov. 2008 PIPING AREA LEAD

(under contract) CDI Corporation

Oil and Gas / Power Industry 200 Public Square

URS – (Washington Group Division) Cleveland, OH 44114

Denver CO (Office)

LaBarge CO2 Sales Expansion Project for ExxonMobil in the Shute Creek Facility. This is to expand the existing sales compression system by 23,000 horsepower in order to market the major portion of the remaining sales quality CO2. This is achieved on the LP compression area by adding a new compressor to work in parallel with the existing unit, adding a new suction scrubber and air cooler. On the MP/HP compression area by adding a new compressor to work in parallel with the other four existing units, adding new scrubbers, filters and air coolers. – Plant Design Group. Responsible for equipment and pipe modeling on both LP and MP/HP areas, which includes layout and detail design of all the piping systems (process and utility). All work is performed on Intergraph PDS Windows NT (3D Plant Design System) producing isometrics, plans, section / details for constructible drawings. Additional responsibilities included formal and informal in-house Intergraph PDS training in Denver, CO – (PDS Instructor). Emissions Reduction Project for SynCrude Canada Ltd., Denver CO. This is a retrofit of Flue Gas Desulfurization (FGD) system into the operation of the two-existing fluid cokers at SynCrude’s oil sands facility. – Plant Design Group. Utilizing my supervisory skill set, to provide technical direction, motivation, leadership and assigning work to the PDS piping design team. Responsible for equipment and piping modeling on all of Spray Dryer Absorber (SDA) and part of Reverse Gas Fabric Filter (RGFF) buildings. Also responsible for the layout and detail design of the lime slurry and oily water sewer systems. Proven ability to juggle the various priorities while keeping performance high and cost under control. Performs a check on the designers work regularly, utilizing Smart Plant Review. All work is performed on Intergraph PDS Windows NT (3D Plant Design System) producing isometrics, plans, section/details for constructible drawings. Additional responsibilities included formal and informal in-house Intergraph PDS training in Denver, CO – (PDS Instructor)

June 2005 to Oct. 2005 SR. PDS PIPE DESIGNER

(under contract) Stat Tech Services

Power Industry P.O. Box 2100

Linde BOC, Inc. Tulsa OK Lynnwood, WA 98036

DN32-Hydrogen Plant Project – Hydrogen Process Plant, Tulsa OK – Plant Design Group - Responsible for layout and detail design of the Process Module, Compressors Area and some underground work. All work was performed on Intergraph PDS Windows NT (3D Plant Design System). Also producing stress isometrics and neutral files, for the stress engineer to import into Caesar stress package. Production of system isometrics, fabrication isometrics, plans, section / details for constructible drawings. Verified and coordinated with equipment vendors and formed a data base. Assisted other PDS designers in resolving isometric extraction problems. Utilization of Smart Plant Review for a complete P&ID review of all systems.

Aug. 2001 to June 2005 DEPUTY AREA SUPERVISOR

(Staff Hire) Bechtel National Inc.

Department of Energy (DOE)/ Nuclear P.O. Box 193965

Waste Treatment Plant (WTP) Richland WA San Francisco, CA 94119

Waste Treatment and Immobilization Plant (WTP) – Vitrification Process, Richland WA – receiving radioactive waste from Hanford underground storage tanks and applying a chemical treatment that will immobilize the waste into a solid glass form. – Plant Design Group. Responsible for providing technical direction, motivation, coaching, identifying, evaluating, improving group coordination and assigning the work to the engineers, designers and drafters. Communicate complex technical issues and recommends solutions to upper management utilizing my broad and diversified knowledge of engineering principles, regulatory standard, design criteria for various issues. Review design specifications, engineering guides and standards; approve key engineering drawings. Review or define engineering scope changes and generate trends. Estimates staffing and schedule requirements for Plant Design, monitors, and control actual performance (EPPR). Prepare and conduct annual performance reviews. Extensive and efficient use of MS Office, Info Works, Team Works, 3D TriForma modeling and 3D Plant Space Design Series.

Robert Lee Henderson Jr. Page 6

Nov. 2000 to Aug. 2001 SR. PDS PIPE DESIGNER

(under contract) Entegee Technical Group

Power Industry 99 Cherry Hill Road

Burns and Roe, Inc. Ordell NJ Parsippany, NJ 07054

Calpine – Decatur Energy Project - 700 Megawatt combined cycle cogeneration power plant project has three Westinghouse 501F combustion turbines – Mechanical Design Group. Responsible for layout and design of Process Steam, Gland Steam, Condensate, Make-up Water, River Water(off-site) and some underground work. All work was performed on Intergraph PDS Windows NT (3D Plant Design System) producing system isometrics, plans, section/details for constructible drawings.

July 2000 to Nov. 2000 SR. PDS PIPE DESIGNER

(under contract) Aide Design Services

Department of Energy (DOE)/ Nuclear P.O. Box 6226

Bechtel Engineering Aiken SC Atlanta, GA 30320

Commercial Light Water Reactor (CLWR) – Tritium Extraction Facility (TEF) project - At Savannah River Site (SRS) – Plant Design Engineering Group. Responsible for layout and design of the Diffuser and Flush Gas Evacuation Glovebox, and room piping for this Glovebox. Also responsible for generating system isometrics for the process group calculations. All work was performed on Intergraph PDS Windows NT (3D Plant Design System) producing isometrics, plans, section/details for constructible drawings.

SUMMARY of PROFESSIONAL EXPERIENCE:

May 98 to Aug.99 Norsk Hydro / Shell SENIOR PDS DESIGNER/ CHK PDS (Oil/Gas - PLTFRM)

Overseas Assignment - Oslo, Norway

Feb. 98 to May 98 Morrison Knudsen PDS INSTRUCTOR PDS (INSTRUCTOR)

Nov.97 to Feb. 98 Chemtex Engr. PDS COORDINATOR/SUPERVISOR PDS (Oil/Gas)

Overseas Assignment - Mumbai, India

Mar.97 to Nov.97 Bechtel Engr. SENIOR PDS DESIGNER/ CHK PDS (Oil/Gas)

Nov.96 to Mar.97 Inter. Engr. S.A. SENIOR PDS PIPE DESIGNER PDS (OFF SHORE)

Overseas Assignment - Rio de Janeiro, Brazil

Aug.96 to Nov.96 Fru-Con Engr. SENIOR PDS PIPE DESIGNER PDS (CHEMICAL)

Feb.96 to Aug.96 Jacobs Applied Tec SENIOR PDS PIPE DESIGNER PDS (MODULAR/CHEM.)

Jan.95 to Feb.96 John Brown Engr. SENIOR PDS PIPE DESIGNER PDS (CHEMICAL)

Oct.94 to Jan.95 Rust Intl. SENIOR PDS PIPE DESIGNER PDS (PULP & PAPER)

Nov.93 to Oct.94 U.S. Filter SENIOR PDS MECH DESIGNER PDS (WASTEWATER)

Jun.93 to Nov.93 Rust Intl. SENIOR PDS PIPE DESIGNER PDS (CHEMICAL)

Apr.93 to Jun.93 MTI Corp. SENIOR CAD PIPE DESIGNER PDS (CHEMICAL)

Dec.92 to Apr.93 Fluor Daniel Inc. SENIOR CAD PIPE DESIGNER PDS (CHEMICAL)

May 91 to Dec.92 Badgers Engineer SENIOR PDS DESIGNER/ CHK PDS (CHEMICAL)

Nov.90 to May 91 Fluor Daniel Inc. SENIOR CAD PIPE DESIGNER ACAD (INDUSTRIAL)

Oct.89 to Nov.90 Fluor Daniel Inc. CAD DESIGN COORDINATOR ACAD/MSTATION

May 89 to Oct.89 Fluor Daniel Inc. SENIOR CAD PIPE DESIGNER ACAD/MSTATION

Feb.89 to May 89 General Foods ASSISTANT DESIGN COORD. ACAD/FIELD

Apr.88 to Feb.89 Fluor Daniel Inc. SENIOR CAD PIPE DESIGNER ACAD/MSTATION

Feb.88 to Apr.88 VEPCO SENIOR CAD DESIGNER MSTATION (POWER)

Dec.87 to Feb.88 Grand Gulf N.P. SENIOR CAD PIPE DESIGNER FIELD (NUCLEAR)

Sep.87 to Dec.87 Stone & Webster SENIOR ENGINEER ASSOC. FIELD (NUCLEAR)

May 86 to Sep.87 Impel Corp. SYSTEM FIELD ENGINEER FIELD (NUCLEAR)

Nov.84 to May 86 Westinghouse FIELD ENGR./ DESIGNER FIELD (NUCLEAR)

Jun.81 to Nov.84 Westinghouse PIPING STRESS ANALYST OFFICE(STRESS)

Mar.80 to Jun.81 Gulf Oil Corp. PILOT PLANT OPERATOR FIELD (PETROLEUM)

Aug.76 to Jan.80 US ARMY(Veteran) HONORABLE DISCHARGE 63B / 64C

Robert Lee Henderson Jr. Page 7

As a Piping Supervisor, Area Lead, Team Leader, Lead Piping Designer and Senior Designer, my experience includes, but is not limited to the following areas, POWER (NUCLEAR; COMBINE CYCLE PLANT); OIL & GAS (REFINERY, FPSO, OFFSHORE PLATFORM); CHEMICAL; WASTE WATER TREATMENT; PHARMACEUTICAL; FOOD PROCESS; PULP AND PAPER; INDUSTRIAL; MODULAR DESIGN.

NOTE – I’m Skilled and Productive, Excellent Lead and Detailed Plant Layout Designer, sound knowledge of piping materials and specifications. Quality oriented, applies extensive and diversified knowledge of design principles and practices. Extensive 2D and 3D CAD knowledge and skills; Knowledgeable, Flexible Versatile on advanced computer systems, techniques, applications, and design methods; makes sound technical design decisions; Completely familiar with Layout and Functionality of all equipment, pumps, turbines, vessels, nozzle arrangements and in line items; identifies locations for pipe supports; understanding of process and analytical requirements.

The positions I've had as - Piping Supervisor, Area Lead, Team Leader and Lead Piping Designer we're not just administrative, I was also responsible for designing and layout like the rest of my team. The administrative part of the job was also included in my responsibility (scheduling, budgeting, assigning tasks, checking, reviewing and sometimes interviewing new hires for the team).

REFERENCES: Upon request.

Contact this candidate