Structural Welder Safety Officer

CLEMENTE N. SAYON JR.

#*** ******* *********, ***. ******* Pangasinan Philippines

Contact Number: 096********

Email Address: ***.*****@*****.***

OBJECTIVES:

A highly devoted to a work and looking to gain a position to the company as a welder where I can contribute my knowledge, skills and experience to carry out duties involving the production processes and other techniques for producing goods.

POSITON DESIRED: PIPE / STRUCTURAL WELDER

EMPLOYMENT RECORD:

EMPLOYER: ARJANE INDUSTRIAL SALES AND SERVICES

ADDRESS: Unit 45A A&E Castro Building, M.L Quezon st. Bambang, Taguig city. Philippines,1637

POSITION: PIPE AND STRUCTURAL WELDER

Duties and responsibilities:

1. Operating safety working equipment and applying safe practices at work while performing duties.

2. Able to weld any structural welding works.

3.Welding of any structural stell such as beams and trushes for structural building.

4. Welding of pipe shoes and other pipe support.

5. Weld pipe and steel components and assemblies based on the required process and welding

Procedure.

6. Does self-inspection of welding grooves, angles, and welding gap allowance using caliper or

other measuring instruments.

7. performs other duties that may be assigned from time to time.

8. Cutting and preparation of pipe using angle grinder or oxy acytelene as needed to assist the fitter or fabricator in able to have a progressive production day by day.

9. knowledge on pipe welding,pipe installation and repair and ability to recognized

welding symbols and specifications and knowledge of general maintenance process and

methods.

10. Weld components using manual or semi-automatic welding machine such as Shielded Metal Arc

Welding (SMAW), Flux Cored Arc Welding (FCAW), Gas Metal Arc Welding (GMAW) in

various positions (such as flat, horizontal,vertical, and overhead).

11. Operate angle grinder or plasma cutting machine as needed to use for those heavy plate to be cut

and determine the appropriate welding equipment and method based on the job requirements.

12. Perform repair task by dismantling of pipe during normal operation as needed by the company

or even on the period of company shutdown at the mechanical section or in any other area of facilities

that need to be repaire and fabricate with the new one and intall it properly with a hydro test to

insure that the pipe being installed has no lake or damage at the pipe joint.

SUPERVISOR : MR. MARLON B. DE VERA

HR ADMINISTRATOR: MR. ERIT S. BERNABE

DATE HIRED : AUGOST 2017 UP TO PRESENT

EMPLOYER : SNAMPROGITTE SAIPEM

Jazan Integrated Gasification Combined Cycle Project

ADRESS : Jazan Saudi Arabia

POSITION : STRUCTURAL WELDER ( SMAW/ FCAW)

Duties and responsibilities:

1.Production welding of pipe shoe at the fabrication site for the preparation of instalation of pipe at the refinary site.

2.Performed welding of some structural works and also welding of fabricated beams using FCAW process.

3.Checking of materials to be weld according to the welding procedure specification (WPS).

4.Self checking of welded materials to qualify visually.

5.To understand and determined appropriate tools and equipment to be used for the job.

6.To carefully setup the welding equipment enable to avoid welding error or welding defects such as luck of penetration,porosity,undercut,and other welding failure that may cause of poor welding production and to cause of repair and damaged of materials.

7.Checking materials properly to be weld such as proper tacking of it, avoid of disalignment of materials that may cause to fail into visual checking by the welding inspector and to securely passed into the radiographic test.

8.Aligning parts to be joined using hand tools and measuring instrument.

9.Joining metal sections using various welding techniques such as flat, horizontal, vertical, and overhead.

10.Properly insure that every welding electrode to be usued for must be properly inserted into the oven heater machine to avoid welding error or welding damaged.

11.Control the welding processes during welding to avoid problems in relation to overheat, distortion, expansion or shrink of parts.

12.Always follow and considered WPS/PQR, instruction from welding forman/ supervisor or as required by the company working procedure.

13.Always checked and observed safety work procedure at anytime of work place to avoid incedent that may cause to damage of lives and company property.

SUPERVISOR: MR. BABLO ( Indian national)

MANAGER : MR. DOMENICO CUNTRO( Direct Construction Team Manager)

REASON OF LIVING: Finished one year of contract

DATE HIRE: MAY 27, 2016 up to MAY 27,2017

EMPLOYER: SIRTE OIL COMPANY (S.O.C.)

For production, manufacturing of oil and gas

ADDRESS: Marsa El Brega- Libya

POSITION: Pipe and Structural Welder

Duties and Responsibilities:

1.Work includes production welding of pipe using electrode 316 for stainless, 6010 for the root pass to get an excellent penetration and 7018 for the second pass and final capping for carbon steel and also performed welding repair of all damages and other desalination repair facilities as needed for the plant.

2.Peformed gouging inside confined space to cut the heavy plates to be replaced for a new one.

3.Assist the fitter to re-aligned tubing of units.

4.Self chicking of welded peice to qualify by visual before checking by the welding inspector.

5.Checking the proper used of materials and handtools mostly for power tools for a safety reason.

6.To always determined the proper materials to be used like selecting appropriate electrode that will suit to the welding materials needed like stainless steel to carbon steel.

7.To always observed safety procedure of the company to avoid incedent at all times mostly to the critical area.

Supervisor: Mr. Allie Abdullah

Reason for leaving : Finished Contract

Inclusive Dates : October 27, 2013 to May 06, 2014

EMPLOYER: SIRTE OIL COMPANY (S.O.C.)

ADDRESS: Marsa El Brega- Libya

Position: Pipe and Structural Welder

Duties and Responsibilities:

1.Production welding of piping spools from small to big bore using 316 for stainless steel, 6010 for every root pass and 7018 for the second and final capping for carbon steel for the preparation to the replacement of the old pipe being installed at the plant or unit.

2.As a shutdown welder, able to performed welding of damages and repair of facilities and other related works .

3.Performed cutting of heavy plates using oxy acetylene to removed the old one and also gouging inside confined space area.

4.To prepare the proper materials to used for welding like selecting proper electrode for the dissimilar material like carbon steel to stainless steel.

5.To always checked the proper using of tools mostly for the power tools such as using of electric grinder, drill machines and etc. for safety reason.

6.Always check safety procedure of work to aviod incident.

Supervisor: Mr. Allie Abdullah

Reason for Leaving : Finished Contract

Inclusive Dates : November 07, 2012 to February 12, 2013

EMPLOYER: GRAIN SILOS AND FLOUR MILLS ORGANIZATION

ADDRESS: Sakaka Al-Jouf (K.S.A.) P.O. Box 597

Position: Pipe and Structural Welder

Duties and Responsibilities:

1.Production welding of spools from small and big bore needed for replacement for any damages from silo and milling department at any time for we are always preparing spare to insure that the production will not be delayed at a long period of time.

2.Studying blueprints, drawings and specifications to determined job requirements.

3.Performed welding and repair of damages at any department with the presence of safety officer.

4.Fabricate using shearing,bending,and rolling machine.

5.Cutting marked-out material sections and shapes using hand tools, flame cutting, torches and metal cutting machines.

6.Cleaning and smoothing welds by filing, chiseling and grinding.

7.Cutting using oxy acetylene and plasma machine for heavy plate.

8.Welding using spot weld machine for the thin sheets materials.

9.To checked the proper used of lifting equipment such us overhead crane.

10.Avoid misused of tools mostly power tools such us electric grinder,drill machine and other hazardous equipment to aviod incident.

Supervisor: Mr. Fahad Alkubaidan

Reason for Leaving : Finished Contract

Inclusive Dates : July 05, 2008 to June 05, 2012

EDUCATIONAL BACKGROUND:

Vocational Course: STARS AND RAINBOW ACADEMY, INC (NC) accredited by

TESDA

Date: December 15, 2007 to February 14, 2008

Address: RECRAA Bldg. Vitalez Compound, Sucat, Parañaque City

Course: Welding

1.Shielded metal arc welding training course (SMAW NCII)

2.Gas metal arc welding training course (GMAW)

3.Fluxed cored arc welding training course (FCAW)

Vocational Course: FCAT ( FERNANDEZ COLLEGE OF ARTS AND TECHNOLOGY)

Date : Feb. 2018 - May 2018

Address. : FCAT BALIWAG BULACAN

COURSE : GTAW WELDING COURSE NCII

Tertiary: NEGROS ORIENTAL STATE UNIVERSITY (1998 – 2000)

Field of profession: Bachelor of Elementary Education

Address: Guihulngan Negros Oriental

Secondary: NEGROS ORIENTAL STATE UNIVERSITY (1994 – 1998)

(formerly Central Visayas Polytechnic College)

Primary: Hinakpan Elementary School (1988 – 1994)

PERSONAL INFORMATION:

Age : 39 years old

Date of Birth : January 28, 1982

Place of Birth : Negros Oriental

Height : 5’7”

Civil Status : Married

Citizenship : Filipino

Language Proficiency: English and Tagalog

Spouse : Mrs. Rita S. Sayon

Daughter : Miss Clent Cyra Jane S. Sayon

Mother’s Name : Mrs. Henerita B. Nueva

Occupation : Housewife

Father’s Name : Mr. Clemente A. Sayon Sr.

Occupation : Farmer

I hereby certify that the above information are true and correct to the best of my knowledge and belief.

CLEMENTE N. SAYON JR.

Applicant’s Signature

Contact this candidate