Electrical Machine Operator
Resume:
Daniel Allen Jr.
Eupora, MS *****
***********@*****.***
Professional Summary
Starting as a helper at the age of 14, I was able to learn how to frame as well run electricity through buildings and homes. As I got older I learned HVAC, heavy equipment operations, safety measures, fabrication, carpenter skills, etc.
In this time I also learned to properly write out paperwork for jobs, equipment, and materials. Reading plans and diagrams for laying out, building and troubleshooting problems.
I have not had proper trade school training, but willing to do so and higher my education in the skills that I have picked up throughout the years of working. Learning is skill that I am always ready to use.
Skills
Daily vehicle inspections
Logbook maintenance
New employee training
Warehouse operations
Stacking pallets
Horizontal wells
Maintaining PPE
Written and verbal communication
Setting up machines
Site conditions evaluation
Deliveries and storage
Machine control
Excavator operation
Safety Procedures
Unpacking merchandise
Pallet Jack Operation
Bulldozer operations
Construction materials unloading
Pre-operational equipment checks
Inspections understanding
Equipment care
Preventive Maintenance
Routine cleaning
Lift up to [Number] pounds
Safety regulations compliance
Job site supervision
Equipment Repair
Safety awareness
Delimbing trees
Inventory movements
Debris removal
Brush clearing
Loading and unloading processes
Moving wood
Chainsaw operations
Product inspections
Counting inventory
Documentation skills
Troubleshooting skills
Stump pulling
Client relations
Materials loading and unloading
Clean driving record
Depth perception
Work History
March 2021 to Current
Jeff Ellis Winona, MS
Heavy Machine Operator
Inspected work areas to organize supplies, remove debris and eliminate safety hazards.
Lifted, moved and bunched felled trees using crawlers and tractors.
Drove dozer in successive passes over construction surfaces to raise or lower terrain.
Inspected, cleaned and performed operator level maintenance on equipment in accordance with standards.
Performed equipment inspections before and after each shift.
Performed preventative maintenance such as reading and cleaning pressure gauges to obtain proper gas or tar flow.
Operated dozer and heavy equipment on slopes, hillsides and roadsides.
Checked to make sure that all trenches were excavated to correct depth.
Loaded trackhoe onto flatbed trucks or into trailers.
Informed supervisor of maintenance concerns, process problems and product issues.
January 2021 to March 2021
Franklin Furniture Houston, MS
Framer
Examined wood, work areas and supplies for defects and damage prior to completing projects to determine accurate timelines and prices of projects.
Designed cleaning and organization systems for job sites to successfully go without accidents.
Worked collaboratively with Franklin Furniture on over 200/day for 60+ days on projects.
Used nail guns, saws and grinders safely and without incident.
Reviewed work orders to accurately prepare inventories of materials, equipment and tools.
Efficiently met deadlines under weather and time constraints.
Followed established job site safety regulations and maintained safe and clean work area.
Planned and executed work with proper tools and materials to maximize efficiency.
Proactively managed projects to obtain 100% customer satisfaction for all custom work.
Facilitated harmonious working relationships with crew members to prevent problems and conflicts.
Constructed 200/day 60+ days custom built designs according to specifications.
Monitored tool and equipment condition and arranged repairs as needed.
Read and interpreted blueprints and construction documents to determine project directives.
Effectively used all fasteners such as nails, screws, pneumatic nailing systems, concrete anchors, powder-actuated fasteners and framing connectors.
October 2019 to August 2020
Moody's Electric Services LLC Louisville, MS
Electrical Apprentice
Checked compatibility and safety of newly installed electrical systems and launched inspections and tests to confirm functionality.
Handled installation of electrical components by splicing, joining and connecting wire.
Worked closely with journeymen, adhering to electrical and building codes while utilizing wide range of power tools and diagnostic equipment.
Safely installed new electrical components and fixtures such as panels, outlets and switches, testing systems to enhance power flow.
Used various measuring and testing instruments such as ammeters, ohmmeters, voltmeters and testing lamps to complete installations and repairs.
Repaired and checked supporting equipment for electrical systems such as brackets and hangers.
Followed strict schedules to install and test 120/208 and 247/600 volt systems.
Spliced, joined and connected wire to accurately install new electrical systems.
Accurately pulled EMT and PVC conduit wire while maintaining safety standards.
Worked under supervision of Journeyman Electrician to learn trade and develop electrical knowledge.
Repaired systems, replaced malfunctioning parts, and supported electrical installations, including wires, panels, switches and outlets.
Helped complete system installations, digging trenches and breaking up concrete.
Evaluated and initiated repair work on various electrical equipment such as light fixtures, controls, switches, relays and circuit breaker panels.
Performed detailed tests on electrical systems after completing installations, replacements and repairs.
Completed and checked wiring tasks through wall and floor conduits and holes accurately.
Safely pulled wire through EMT and PVC conduits while ensuring accuracy and efficiency.
Configured controllers and set up panels for residential, industrial, and commercial installations.
Repaired light fixtures, controls, switches, relays and circuit breaker panels based on detailed evaluations.
Replaced and repaired lighting fixtures and electrical control and distribution equipment, including switches, relays and circuit breaker panels.
Spliced, joined and connected wire to fixtures and other electrical components.
Studied building schematics to determine location of wiring and equipment.
Executed electrical wiring plans for residential, commercial, industrial and other electrical systems.
Assessed electrical systems, equipment and components to identify hazards, defects and needed adjustments or repairs.
Inspected electrical systems, equipment and components to identify hazards, defects and repair requirements.
Prevented breakdown of systems by routinely inspecting and replacing old wiring and cleaning circuits.
Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
Connected appropriate parts to deliver power to audio and visual equipment, signaling devices and heating or air conditioning systems.
Installed and wired electrical hardware, including transformers, junction boxes, service panels, electrical boxes, switches and circuit breakers.
Demonstrated expertise in use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters to complete fast-paced work.
Installed safety and distribution components for electrical systems, such as switches, resistors and circuit-breaker panels.
Planned layout and installation of electrical wiring, equipment and fixtures based on specifications and applicable code.
Managed business administration duties, including report generation, recordkeeping and supply ordering.
Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
Read and interpreted electrical, mechanical and architectural drawings and electrical code specifications for wiring layouts.
Consulted with management on functionality and lifespan of electrical equipment, advising when continued use may be hazardous.
Installed 120/208 volt systems and 347/600 volt systems.
Fabricated custom and replacement parts according to specifications, using hand tools.
November 2017 to March 2019
Coggins Construction Sturgis, MS
Residential Construction Laborer
Interpreted job site supervisor's orders and technical documentation to complete accurate work.
Gathered waste and trash from job sites for placement in refuse containers to keep job sites clean and organized.
Worked with speed and accuracy to consistently meet production standards.
Gathered and disposed of work site debris to remove safety hazards and boost team productivity.
Supported teams with performing routine and complex construction work.
Assisted with smooth completion of work by transporting and organizing materials for project needs.
Fully cooperated with team members to deliver team-oriented atmosphere, which enabled completion of multiple large-scale projects.
Boosted team efficiency and project requirements by correctly operating site equipment.
Brought materials and tools from trucks and storage facilities to work site locations and organized for expected needs.
Enhanced job site safety by vigilantly monitoring equipment and team members to prevent accidents.
Interacted daily with various project managers, subcontractors and municipal inspectors to complete construction projects.
Prepared and cleaned surfaces for rebuilding purposes by removing damaged tiles, bricks and mortar.
Efficiently prepared job sites by removing debris and setting up materials and tools.
Demonstrated safe and proper operations of equipment to prevent harm to team members or equipment.
Recognized and reported potential project challenges and assisted with solutions.
Responded to and resolved warranty claims, performed homeowner orientations and maintained inventory homes.
Learned how to complete tasks with minimal supervision, contributing to successful results.
Worked independently in fast-paced environment while meeting productivity and quality expectations.
Directed traffic away from hazardous locations, protecting team members and general public.
Prepared job sites for work plans by measuring and marking different distances.
Handled construction tools and machinery to effectively complete various projects.
Collected measurements and marked locations as part of project preparations.
Used required tools to complete jobs, including hammers, saws, squares, levels and fastening devices.
Erected and removed temporary structures such as trench liners and scaffolding to meet team needs.
Determined materials needed for daily shift and loaded vehicles with equipment and supplies.
Worked with more knowledgeable professionals to grow understanding of principles and construction standards.
March 2014 to May 2016
Schueck Steel Blythville, Arkansas
Helper
Operated various hand and power tools such as chop saws and table saws to complete constructions tasks.
Paid close attention to all instructions from supervisor and completed tasks on time.
Maintained maximum organization and productivity by properly sorting project components on work tables.
Documented production information via daily system logs and discussed non-conformance issues with management.
Took on additional shifts during peak work periods to keep projects on schedule.
Used power saws to cut and shape materials to specified measurements.
Monitored machinery in operation to identify concerns and make corrections or report complex problems.
Maintained work areas by cleaning and straightening for maximum productivity and safety.
Used hand trucks, forklifts and scissor lifts to complete tasks and transport items.
Supported current production needs by moving items between equipment, conveyors and staging areas.
Supported machine operators in setup and operation of production equipment resulting in efficient runs.
Conducted quality inspections of finished products and made minor repairs to meet project expectations.
Cleaned up construction sites by removing excess trash and debris, wiping down fixtures and windows and dusting ceilings and ceiling fans.
Took part in all company-offered training sessions, and acquiring knowledge needed to operate machines.
Demonstrated proper use of equipment to newly hired employees to avoid workplace injuries.
April 2013 to June 2014
David Dewberry Eupora, MS
Dewberry Construction
Gathered waste and trash from job sites for placement in refuse containers to keep job sites clean and organized.
Interpreted job site supervisor's orders and technical documentation to complete accurate work.
Operated equipment such as fork trucks, and cranes to meet challenging daily demands.
Recognized and reported potential project challenges and assisted with solutions.
Handled construction tools and machinery to effectively complete tasks.
Worked independently in fast-paced environment while meeting productivity and quality expectations.
Supported teams with performing routine and complex construction work.
Learned how to complete tasks with minimal supervision, contributing to successful results.
Gathered and disposed of work site debris to remove safety hazards and boost team productivity.
Brought materials and tools from trucks and storage facilities to work site locations and organized for expected needs.
Observed all safety regulations on job sites to keep accidents to minimum.
Prepared job sites for work plans by measuring and marking different distances.
Boosted team efficiency and project requirements by correctly operating site equipment.
Collected measurements and marked locations as part of project preparations.
Demonstrated safe and proper operations of equipment to prevent harm to team members or equipment.
Operated machines to safely move materials.
Efficiently prepared job sites by removing debris and setting up materials and tools.
Determined materials needed for daily shift and loaded vehicles with equipment and supplies.
Used required tools to complete jobs, including hammers, saws, squares, levels and fastening devices.
Enhanced job site safety by vigilantly monitoring equipment and team members to prevent accidents.
Operated equipment to move materials and promote job efficiency.
Used radios and hand signals to coordinate communication between equipment operators and ground workers.
Helped successfully complete projects ahead of schedule.
Communicated with equipment operators to effectively assign equipment and manage smooth materials movements.
Assisted with smooth completion of work by transporting and organizing materials for project needs.
Fully cooperated with others to deliver team-oriented atmosphere, which enabled completion of multiple large-scale projects.
Attended safety trainings and workshops offered by employer, bolstering overall knowledge of appropriate measures and determining areas requiring improvement.
Worked with more knowledgeable professionals to grow understanding of principles and construction standards.
June 2011 to July 2013
Allen Electric Ackerman, MS
HVAC Installer
Increased longevity of HVAC systems by performing preventive maintenance.
Maintained environmental conditions by rebuilding and replacing faulty components.
Assembled auxiliary components to heating or cooling equipment, including air ducts, pipes, discharge valves and flues.
Installed components to improve HVAC system performance.
Optimized performance by balancing systems and calibrating controls.
Consulted with customers to trace malfunctions and identify root causes, completing speedy repairs to return full performance levels.
Laid out and installed electrical connections and controls as part of required systems.
Completed thorough inspections of supporting electrical systems to assess continuity and locate faults.
Completed circuits by connecting systems to sources of refrigerant, fuel or water, testing all connections for integrity.
Employed appropriative techniques to isolate leaks in piping and connections.
Removed old equipment from customers' homes and cleaned up areas to prepare for new installations.
Operated portable metal-working tools or welding equipment to fabricate, assemble and install ductwork and chassis parts.
Tested automatic, programmable and wireless thermostats in residential or commercial buildings to decrease energy usage.
Utilized pressure gauges and soap-and-water solutions to test pipe and tubing joints for leaks.
Discussed heating and cooling system malfunctions with customers to isolate problems and verify corrected malfunctions.
Located and marked pipe positions, hole passages and duct connections in walls and floors throughout facility.
Used proper measuring and testing instruments to troubleshoot breakdowns, perform preventive maintenance and repair malfunctioning HVAC systems and components.
Installed bypass dampers, low voltage wiring, smoke detectors, split systems and package units in commercial or residential buildings.
Connected heating or air conditioning equipment to water, fuel or refrigerant sources to form complete circuits.
Used pressure gauges and soap-and-water solution to test connections for leaks.
Laid out electrical wiring to connect controls and equipment, adhering closely to wiring diagrams.
Communicated effectively with clients to identify problems and verify repairs corrected malfunctions.
Worked in strict compliance with applicable OSHA regulations and safety requirements.
Analyzed blueprints and manufacturers' design specifications to determine HVAC equipment configuration and complete proper installation.
Installed components to HVAC systems, such as expansions, discharge valves, air ducts, dampers and stokers.
Kept accurate records of work activities, time, materials, and faults on work orders.
Repaired, replaced and serviced both residential and commercial HVAC equipment, components and wiring.
Installed, connected and adjusted thermostats, humidistats and timers for optimal performance.
Used electrical testing equipment to assess electrical circuits and components for continuity.
Education
4 2015 Old Dominion Christian School Homeschool
High School Diploma
Contact this candidate