Forklift Operator Fitter
Resume:
Kevin Woods
Houston, TX
****************@***********.***
An interesting position with a growing company that will allow me to utilize my training, experience and interpersonal skills.
Authorized to work in the US for any employer
Work Experience
Inlet / Outlet Operator
Tenaris - Bay City, TX
November 2018 to May 2020
Duties include but not limited to, monitoring seamless pipe, 5.5", 7.5", and 9.65" throughout the heat treating process. This is done via visual observation and computer assistances. Sample cuts preformed randomly by automatic saw. Daily blade changes are done when needed. Asquench pipe sample cuts performed with plasma cutter. Operated sit down forklift as needed. Performed duties with required PPE and followed safety rules. Cleaned work area daily. Forklift Operator
G.E. Air Turbine Assembly Facility - Channelview, TX February 2018 to September 2018
Duties include but not limited to, operated small overhead A-frame crane, and sit down forklift to raise and lower air turbine parts for cleaning. Operated sit down forklift to organize parts on 4 level heavy duty shelves after cleaning. Cleaned air turbine parts by hand and with mechanical assistances. Kept work area clean and work safely with PPE.
Instrument Fitter
Bechtel - Corpus Christi, TX
January 2018 to February 2018
Duties include but not limited to, used compression type manual hand benders to bend 1/4', 3/8', and 1/2' stainless steel tubing. Pulled and ran Decron insulated tubing in cable tray. Measured and cut unistrut. Fabricated stands and mounted instruments for product analysis. Cut and threaded 1/2' airplane with 535 threading machine. Used bandsaw drill motor, and hand tools to fabricate other materials for new construction.
Instrument Fitter
Contech - Baytown, TX
July 2017 to December 2017
Exxon/ Mobil Complex)
Duties include but not limited to, used compression type manual hand benders to bend 1/4', 3/8' and 1/2' stainless steel tubing. Pulled and ran Decron insulated tubing in cable tray. Fabricated stands and mounted instruments for product analysis. Cut and threaded 1/2' air pipe with 535 threading machine. Used band saw, drill motor, and hand tools to fabricate other materials for refinery. Used Hilti drill to install anchors in concrete floor.
Asembler
Sheinder Electric - Houston, TX
May 2017 to June 2017
Houston, TX
Duties include but not limited to, operated sit down forklift to stock breakers and other electrical components onto warehouse for level racks. Used hand and power tools to assemble and disassemble breakers. Packed and unpacked breakers for shipping. Kept assembly room neat and clean. Forklift Operator/General Labor
Ameripipe - Houston, TX
March 2017 to April 2017
Duties include but not limited to, operated sit down forklift to transfer pipe for assembly and shipping. Used hydraulic lathe to thread schedule 40 pipe. Applied 1' to 3' fittings onto pipe. Used sealant and Teflon tape to prevent leakage. Used band saw to cut all thread for use with hangers. Kept shop nice neat and clean.
Instrument Fitter
new construction - Groves, TX
October 2016 to January 2017
Duties include but not limited to, used band saw, drill motor, and power pony to thread ridged conduit. Used basic hand and fabricate tools to fabricate stands and brackets for plant use. Primarily used compression benders to bend 1/4', 3/8', and 1/2' stainless steel tubing for valve operations. Pulled wire, and installed cable and tubing tray. Performed duties with required PPE and followed all safety rules. Cleaned work area daily.
Conn's warehouse
STAFFORCE Staffing Solutions - Houston, TX
August 2016 to September 2016
Staff Force Personnel Conn's Warehouse
Houston, TX
Duties include but not limited to, used pallet jacks to move hardwood goods and electronics in warehouse. Used hand trucks to load and unload appliances onto box van semi-trucks. Operated trash compactor to dispose of cardboard boxes, and various refuse in warehouse. Swept and cleaned as needed. Temporary job.
Assembly/Forklift Operator
Aerotek - Pasadena, TX
June 2016 to July 2016
Duties include but not limited to, used hand and power tools to assemble stainless steel barrels for soda machines. Operated robot controlled welder, and steel roller machine to fabricate metal for barrels. Operated sit down forklift to stack pallets of barrels for shipping. Cleaned shop as needed. Temporary job. Forklift Operator
United Salt Corporation - Baytown, TX
November 2015 to January 2016
Duties include but not limited to, used forklift to load pallets of salt on flatbed and box eighteen wheeler trucks. Used forklift to unload pallets from flatbed eighteen wheeler trucks. Arranged pallets and cleaned warehouse as needed.
Instrument Fitter/Assembly/Forklift Operator
Lauren Construction/Engineering - Odessa, TX
February 2015 to July 2015
Duties include but not limited to, used compression benders 1/4', 3/8', 1/2' to bend stainless steel tubing. Used band saw to cut and fabricate brackets for tubing. Operated JLG man lift to access areas for tubing to be installed. Used basic hand tools to install brackets and tubing. Used forklift as needed. Instrument Fitter/Assembly/ Forklift Operator
Cameron Drilling Systems - Houston, TX
February 2012 to April 2015
Duties include but not limited to, used compression benders 1/4', 3/8', and 1/2' to bend stainless steel tubing when constructing B.O.P.s. Used an electric hose crimper to make 5/8 flex hose. Constructed junction plates with fittings for mux and pods assembled stingers for B.O.P.s Operate forklift and overhead cranes for correct material placement.
Education
High school diploma in academics
J.Frank Dobie high school. - Houston, TX
September 1985 to June 1989
Skills
• Forklift
• Pipe Threading
• Blueprint Reading
• Manufacturing
• Warehouse experience
• Machining
• Plasma Cutting
• Industrial equipment
Certifications and Licenses
Forklift Certified
Present
Contact this candidate