Mechanical Engineer Pollution Control

CURRICULUM VITAE

Name: DIPAK KOLEY

Address: Kalitala Dakshin, Balitikuri, Howrah – 711113, West Bengal, India

Near SNC Yamaha Motors (Two Wheeler Showroom) Mobile: +91 - 983-***-**** II Email ID: *********@*****.***

Objective

Want to serve of my experience.

Career Summary

22 years of experience in the field of vehicle body (exterior and interior) designing out of 39 years of total experience. Career began in Research & Development department for Industrial Fan, Ventilation and Air Pollution Control System as a Mechanical Draughtsman.

Specialist - concept and surface design of mechanical components using CATIA & CREO.

Present Career

Mechanical components design using CATIA and CREO. Also doing Data management using Microsoft office i.e. word, excel, power point etc.

Past career

Automotive

Designing of Vehicle BIW, Interiors, Exteriors & Styling using CATIA V5 and PROE / CREO; Reverse Engineering using FEROARM; Class A surfacing of Car and Truck using ICEM-Surf; Modeling and detailing of Airbus harness bracket mounting, curtain mounting; Surfacing of Airbus doghouse and monuments.

Others

Designing - Pumps, Valve, Forklift, Material Handling Units, Civil Construction Equipments, Industrial Fans, Ventilation & air Pollution Control Systems using AUTOCAD, PROE / CREO and CATIA.

Skill

Leadership

CAD and Manufacturing.

Software application

Present

CATIA V5 - Proficient (working since 2009)

CREO 4.0 - Proficient (working since 2016)

MS Office, Paint & PP - Familiar

Past

ICEM surf-4.1 - Familiar (worked from 2007 to 2010)

UG-NX5 - Familiar (worked from 2009 to 2010)

CATIA V4 - Familiar (worked from 2007 to 2008)

Pro E-2001 - Familiar (worked from 1996 to 2006)

AutoCAD 2010 -Familiar (worked from 2011 to 2014)

Training / Certification

Supervising

MCAD

5S

Lean manufacturing

ISO

Quality and Assurance

Experience: 39 years (22 years in automobile + 17 years in other field)

Vegazva Engineering Pvt. Ltd., Gurugram, India from August 2014 to Till date

As a Senior Designer / Consultant in product development.

Hindustan Motors Limited, Kolkata, India from January 2011 to July 2014

As a Deputy Manager – BIW- CAD-R&D

EDAG Engineering and designing India Pvt. Ltd., Gurugram, India from January 2007 to December 2010 As a Project Coordinator in Product Development.

LML Limited, Kanpur, India from January 2003 to December 2006

As a Senior Engineer - R&D (Body Group).

Reva Electric Car Co Pvt. Ltd. (now Mahindra Electric), Bangaluru, India from Dec’2000 to Dec’2002 as a Senior Engineer in R &D.

LML Limited, Kanpur – India From July 1994 to November 2000

As a Senior Draftsman in R&D (Body group).

Calcutta Fan Works Ltd, Kolkata, India From February 1982 to June 1994

As a Design Engineer in R & D

Responsibility & Duties

Common for all organizations

1. Creates data and drawings as needed for the Product Engineering group.

2. Processes requests for specifications & other documents in respective area and responds to internal inquiries of general, technical, or specialized nature.

3. Transfers files to and from engineers, other designers, customers, and suppliers, manages CAD libraries and provides support to all departments within the organization.

4. Participates in continuous improvement processes, researches and recommends new products and/or processes, supplies input of ideas and/or direction of new projects having significant impact on the department.

5. Performs other duties and project work as necessary, serves as a backup for other staff as needed.

Vegazva

CAD design of pump, valve & forklift of USA project on behalf of Vegazva and material handling unit, machine for civil construction & maintenance equipment of Indian air force on behalf of other’s organizations.

Hindustan Motors Limited

Vehicle integration (from conceptualization to release for production) for a vehicle variant based on existing car platform.

BIW, Exteriors, Interiors and Engine components design using CATIA V5 and PROE.

ECR, ECN, DFMEA, DVP&R, PPAP, BOM preparation and release for prototyping and series production.

Supervising of Prototype and CAD Centre.

Dimension management, tolerances, GD&T, 3D and 2D.

Projects executed

Design and Development of new Product Model Veer & Club7.

Gauge reduction of Ambassador Skin panels.

Design and development of four meter car with Ambassador Platform.

BIW and Plastic parts upgrade for BSIV engine in Ambassador Car.

Design and development of New Wiper design in Ambassador Car.

Design and development of DEMIST design in Ambassador Car.

Checking BIW 3D modeling as per drawing of Ambassador Car for CAE purpose.

Design and development of Low cost Cabin of LIGHT Commercial Vehicle.

Design and development of Ambassador RH drive to Ambassador LH drive car.

Prototype of Demist system, new Wiper system and new model Veer & Club7.

EDAG Engineering and designing India Pvt. Ltd.

Checking of Class-A Surfacing with ICEM-Surf (4.4) for Truck of Nord Benz & AMW, Car of SAIC Motors & Mini Truck of GMC.

Modeling and detailing of Airbus harness bracket mounting, curtain mounting using CATIA V5; Surfacing of Airbus doghouse and monuments using CATIA V5.

Checking of modeling and detailing using CATIA V5, PROE & UG NX5 of various car components and assembly of GM.

Dimension management, tolerances and GD&T.

Worked onsite in China and Brazil on behalf of EDAG.

LML Ltd.

Checking of 3D modeling and 2D drawing of component and assembly of various two wheelers (NV & SUPREMO scooter and ENERGY FX, ADRENO, FREEDOM, GRAPTOR & CD100 motor cycle) using PROE.

Dimension management, tolerances and GD&T.

Supervising for prototype

Reverse engineering with FEROARM and RENISHAW.

Component and assembled drawing with drafting machine.

ECR, ECN, DFMEA preparation and release for prototyping and series production.

Worked onsite at Piaggio, Italy on behalf of LML.

Reva Electric Car Co Pvt. Ltd. (now Mahindra Reva Electric Vehicle Pvt. Ltd.),

3D modeling and 2D drawing of components & assembly of base model of REVA using PROE.

Supervising for CAD and prototype.

ECR, ECN, DFMEA, DVP&R, PPAP preparation and release for prototyping and series production.

Attending customer complain for solving.

Coordinating with other departments.

Feeding for vendor development.

Calcutta Fan Works Ltd.

Designing with Drafting Machine, Erection & Commissioning of Fan (Air Circulator, Man Cooler, Axial Flow, Bifurcated, Roof Extractor, and Humidifier) and Air Pollution Control & Ventilation System as per customer specification.

BOM preparation and release for prototyping and series production.

Erection and Commissioning.

Education

Diploma ( Mechanical) passed in 1982

From Central Training Institute (now Advance Training Institute), Howrah, West Bengal, India.

Graduation (B-Com) passed in 1979

From Nara Singha Dutta College under University of Calcutta, Howrah, W.B. - India

Higher Secondary Examination passed in 1976

From Sri Ram Krishna Shikhshalaya under WBSE, Howrah, W.B., India

Personal Details

Name : Dipak Koley

Father’s Name : Ajit Koley

Permanent address : Kalitala Dakshin, Balitikuri, Howrah –711113

West Bengal, India

Communication address : - Do -

Passport no. : V5601031, Valid until 06.12.2031

Date of birth : 18.08.1959

Hobbies : Writing, sketching, playing Football and Cricket

Declaration

I hereby declare that all the details furnished above are true to the best of my knowledge and belief.

Dipak Koley - Date:

Contact this candidate