Computer Technician Graphic Designer

Summary of Qualifications:

Strong experience working in medical device industry with Engineering Design background

Proficiency in Catia V5, Smarteam, Solid-works 2019, Pro-E Wildfire4, Unigraphics, NX3, Windchill 9.0, Intralink 8.0, AutoCAD 2019.

Created accurate 3D models, preliminary layouts, production details and assembly drawings first time quality at first time to meet drawing release date using Catia V5 and AutoCAD 14 design software application.

Performed tolerance analysis per ANSI Y14.5, design analysis and sizing. Generated 3D tooling design to support production as needed.

Supported organization which includes but is not limited to the coordination of Engineering drawing services such as tooling drawings, details & assembly drawings, materials and suppliers with internal customers and department staff.

Perform R&D drawings check to ensure drawings standards will adhere to ASME Y14.5M-1994 and JJSV drawing standards procedure prior to upload drawings for approval in Agile system.

Delivered accurately 3D machined model; Second Stage Regulator Transducer Model, assembly fixture for Warrior Project utilizing Pro-E Wildfire 4.

Generated ECNs (Engineering Change Notice) as required to support quality, customers, manufacturing and certification.

Location (more than 20 miles from the office):

I am current location is Santa Ana, CA 92706. I am available for phone/in-person interview with prior notice and can start working immediately.

Linh Do

Santa Ana, CA 92706

Objective:

Exploring a position in the Mechanical Design Engineer.

Profile:

A dynamic, motivated Designer Engineer who is solutions-focused, organized, self- driven and possesses great creative design & analytical skills. A Designer who had experience in leading turnarounds for underperforming operations, ability to multitask in a very fast-paced environment and hands-on, with the drive to own designs and see them through to full-scale successful launch. Build reputations challenges as a problem solver, addressing and resolving issues to reduce time and cost expenditures.

Selected Achievements:

Master Layout Outstanding Performance Award.

Special skills:

Proficiency in Catia V5, Smarteam, Solid-works 2019, Pro-E Wildfire4, Unigraphics, NX3, Windchill 9.0, Intralink 8.0, AutoCAD 2019.

Time-management and problem-solving skills.

Trains others as needed to ensure a highly productive staff.

Remarkable ability to be accurate and neat in drawing work.

Strong business mindset, results driven.

Exceptional ability to visualize ideas in three-dimensional form.

Profound ability to work in team environment.

Creative thinking, integrity, perseverance and attention to quality.

Sheet Metal Design; ASME Y 14.5.

Working knowledge of weld standard of AWS, and GD&T.

Proficiency in various computer software such as Adobe CS (illustrator, Photoshop, In-Design) Microsoft Word, Excel, Power point, and Outlook.

Education

Southern California Institute of Technology, Anaheim, CA, 2002

Bachelor of Applied Science in Electronics Engineering Degree. GPA: 3.90

Major: Electronics Engineering

Associate of Applied Science Electronic / Robotics Technology

South Coast College, Anaheim, CA, 1999

Microsoft Certified Professional, Computer Technician.

Major: Computer Technology

Employment History

Johnson & Johnson Surgical Vision. Santa Ana, CA 92705

HireGenics Duluth GA 30096 (contract) 12//2017-12/2019

Graphic Designer II

Create, review, and release of parts label and graphic documents required for products, quality system and environmental management system using Agile PLM. Incorporate all redlines and any additional approver comments/changes to Label Specification. Proofread completed Label Specification against redlines to ensure all changes have been incorporated.

Use Adobe illustrator to place the updated PDF format on the appropriate blank Label stock template as indicate on Label Specification with Adobe illustrator. Verify all sample labels against the approval redlines and the final proof approved CPL to ensure all information on the labels is correct. Finalize Change Order (CO) for release.

Perform R&D drawings check to ensure drawings standards will adhere to ASME Y14.5M-1994 and JJSV drawing standards procedure prior to upload drawings for approval in Agile system. Collaborate with engineering, Quality, Manufacturing, and customers to provide continuous improvement.

Zodiac Aerospace, La Palma, CA 90623 07/2012-05/2017

Design Engineer II

Produce designs of aircraft interior products variety from galleys, lavatories, monuments, and panels used in commercial aircraft. Support existing designs of products which are manufactured on site. Provide customer and production support on multiple programs such as A25, F54, F52, G17, G46, G47, G87, and H62.

Reduced any engineering issue that may arise during initial production of new product designs by 20% to ensure delivery of product on time, ease of manufacturing, cost, weight reduction.

Conduct research and create design proposals for projects. Manage costs involved in production.

Applied analysis problem solving skills to identify problems and develop positive solutions.

Generated ECNs (Engineering Change Notice) as required to support quality, customers, manufacturing and certification.

Created accurate 3D models, preliminary layouts, production details and assembly drawings first time quality at first time to meet drawing release date using Catia V5 and AutoCAD 14 design software application.

Create parts lists and exploded assembly drawings for install.

Developed drawings and other engineering data required for the manufacturing of the product and data submittal to the customer.

Performed tolerance analysis per ANSI Y14.5, design analysis and sizing. Generated 3D tooling design to support production as needed.

Provided design plan based on Bill of Material analysis.

Force Protection Industries, Inc., Ladson SC

Advantege Technical Resourcing, Garland, TX (contract) 08/2010-09/2011

CAD Engineer

Developed parametric models and drawings of mechanical design armored vehicles, according to design intent using Solidworks 2008

Performed modeling and drafting according to FPI standards. Knowledge in PTC best practices in 3D modeling.

Sufficient knowledge in Geometrical dimensional tolerances GD& T Involved in Quality checking of Solidworks models

Review and update all The Joint All-Terrain Modular Mobility Asset (JAMMA) program’s design drawings for blast- and ballistic-protected armored vehicles to comply with the Army’s specification.

Design, model, and test prototypes for products.

Consulted regularly with Project Managers to report status, raise issues, takedirection, and help where needed.

Collaborated with Mechanical Engineering Manager to create an Engineering Deliverables plan that when executed will satisfy the overall project schedule Performed other job-related duties as assigned to meet business plan objectives. Review the impact of this position on the workplace environment and to take all necessary actions to reduce or eliminate negative impacts.

Delivered superior customer service to all internal and external customers.

Contributes to team efforts by accomplishing related results in cooperative and supportive manner.

Clipper Windpower, Inc., Carpinteria, CA 01/2010-03/2010

CDICorporation, Carpinteria, CA (3 months contract only)

Pro-E Checker

Checked drawings for consistency (especially the dimensions tolerances, notes. Checked First Articles Inspection of the 80M Seismic Tower Assembly to release, approve documentations to meet the schedule delivery.

Modified and checked the details / assembly 3D models in windchill release files of the base, lower, middle, and upper can section of the tower to ensure models and drawings are neat, accurate to compliance with company standards,and comply with AWS, and GD&T standard.

Sperian Respiratory Protection, Santa Ana, CA 09/2006-10/2009

Mechanical Drafter

Created an electronic E.O; mechanical drawings and electrical diagrams forSCBA, Respiratory, Eye & Face, Body and Hearing protection program. Delivered accurately 3D machined model; Second Stage Regulator Transducer Model, assembly fixture for Warrior Project utilizing Pro-E Wildfire 4.

Generated assembly layout models and detail drawings based on design engineering requirements. Carry out Engineering Changes on development and existing products to ensure that all details on the ECO and drawings (including BOM, notes, dimensions, change notice information etc.) are complete and accurate. Check all aspects of details drawings, missing dimensions, 3D models for interferences, correct and appropriate GD&T. Ensures the successful completion of assigned projects to meet on time delivery schedule

Produced neat and accurate design layouts, motions studies, and mechanical assembly and detail drawings from basic design requirements.

Crane Aerospace. Burbank, CA 03/2005-09/2005

Two Roads Professional Resources, Inc., Huntington Beach, CA (contract)

Sr. Checker / Designer

Communicates with Engineering and Manufacturing to create, clarify, improve and correct drawings as required. Modified 3D model and all drawings are neat, accurate, and in compliance with internal standards and requirements for Boeing 787’s Brake System Control Unit program.

Supported senior design engineers by generating drawings of mechanical components, layout drawings, assembly instructions, and Bill of Materials (BOM) from sketches.

Utilized Unigraphics, NX3, Solid-works to create accurately 3D models and detailsdrawings with dimensions, tolerances, materials, and detailed views as required. Checked and defines fit, form, and function of each part.

Using PLM system to manage data summit & evaluate change request, assign change tasks. Sign-off on promotions & revisions and archive related documentations.

Integrated product designs into manufacturing technologies that provide highperformance product at optimum cost.

Delivered complex and detailed Solid works drawings using specifications, calculations and vendor data.

Worked with others to develop high quality designs that meet or exceed design requirements.

Performed design checking of finished drawings: verifies that all views, sections, dimensions, callouts, notes, specifications, and partslists are completeand that drawings comply with specific customer requirements; assists andinstructs in the interpretation of drawing practices;coordinates drawingcorrections with the engineers, designers and drafters.

Boeing, Long Beach, CA 08/2000-09/2001

Aviant, Long Beach, CA (contract)

Engineer General

Modified, digitized and stored engineering drawings into IMAN database.

Entrusted with customer service issues as a result of great ability to promptly resolve concerns and satisfy customers.

Checked all drawings are neat, accurate to compliance with company standards, Engineering and Q/A department requirements for MD-11, MD- 80, C-17 & Boeing 737’s program.

Utilized Product Lifecycle Management (PLM) system to manage data summit and evaluate change request.

Delivered general support activities for the Production. Support Organization which includes but is not limited to the coordination of Engineering drawing services such as tooling drawings, details & assembly drawings, materials and suppliers with internal customers and department staff.

Provided status reports and assists in the decision process related to engineering/tooling services.

Contact this candidate